This load moment indicator is a tower crane safety system. It has the following functions: Working temperature: -20 --- + 60 -40 --- + 80 Working humidity: í_ 95%/25 Combined error: 1% Power supply: AC220V (to be customized according to clients requirement) Parameter: Rated load, actual load, trolley amplitude, hook height and moment percentage Signal lamp&buzzer: Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous response indicates alarm and relay outputs. Other functions: Records downloading; sensors self-diagnostic; applicable to tower crane with variety of falls.
This load moment indicator is a tower crane safety system. It has the following functions: Working temperature: -20 --- + 60 -40 --- + 80 Working humidity: í_ 95%/25 Combined error: 1% Power supply: AC220V (to be customized according to clients requirement) Parameter: Rated load, actual load, angle of the jib, hook height and moment percentage Signal lamp&buzzer: Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous response indicates alarm and relay outputs. Other functions: Records downloading; sensors self-diagnostic; applicable to tower crane with variety of falls. carton
INSTALLATIONS Weight Measurement Range: 0T~400T. Resolving Ability: 0.1T. Synthetic Errors: â?¤5%F.S. Equipped with Output Interface RS485. Working Condition: ï¼?20ï½?60. Relative Moisture under Working Condition: 90%RHï¼?20ï¼?. Working Voltage: AC220V±25%. Preset Output Contact Capacity: AC220V 7A. IP Grade: weight sensor with IP68; Monitor with IP64.
WTL-A220 Load Moment Indicator is a new type of smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the load reaches the given point of rated load, the acousto-optic alarm of the hoisting weight limiter will be triggered, with the switching value output displayed. The whole system is composed of sensor, connecting cable, microcomputer host and so on. The device is designed and manufactured in accordance with requirements of GB 12602-2009 Lifting Machinery Overload Protection Devices and GB / T 3811-2008 Crane Design Specification. With reasonable layout, easy installation, simple operation, WTLA220 Load Moment Indicator works well with high accuracy and other advantages Weight Measurement Range: 0T~400T. Resolving Ability: 0.1T. Synthetic Errors: â?¤5%F.S. Equipped with Output Interface RS485. Working Condition: ï¼?20ï½?60. Relative Moisture under Working Condition: 90%RHï¼?20ï¼?. Working Voltage: AC220V±25%. Preset Output Contact Capacity: AC220V 7A. IP Grade: weight sensor with IP68; Monitor with IP64.
Cxt/20p-i tower crane load moment indicator Working temperature: -20 --- + 60 -40 --- + 80 Working humidity: 95%/25 Combined error: 1% Power supply: ac220v (to be customized according to clients requirement) Parameter: Rated load, actual load, trolley amplitude, hook height and moment percentage Signal lamp&buzzer: Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous indicates alarm and relay outputs. Other functions: Records downloading; sensors self-diagnostic; applicable to tower crane with standard fall Remarks: cxt/20p-i is a basic model while cxt/20p-ir add the function of slewing indication and cxt/20p-if adds the function of anemometer.
his anti-collision device is a tower crane safety system. It has the following functions: CXT/800 system protection Tower crane Anti-collision protection If tower cranes are with the same height, this system can control and handle it effectively, once detecting that the running jibs interfere with each other automatically. While not with the same height, this system can also work effectively once anticipating the hook or cable of the higher tower crane may collide the jib or counter jib of lower one. Zone(obstacle) anti-collision Due to the complexity of some sites, the system can automatically and effectively determine up to 10 prohibited zones in which the hook or jib are not allowed to operate. Boundary protection Complicated environment usually exists around work site. The CXT/800 system can be preset with a up to 30-point boundary protection area in which the operating or over-flying of hook is not allowed. It can effectively prevent accidents from happening. Pre-alarm/alarm and control CXT/800 system allows the operator to work at maximum efficient way and optimize the use of Crane. Once monitoring the pre-set data for possible collisions in crane interference area and over-flying of sensitive areas, there will be pre-alarm and visual and audible alarm and the system will stop the maneuver automatically to maintain a safety margin.
Cxt/800anti-collision and zone protection system Cxt/800 system protection Tower crane anti-collision protection If tower cranes are with the same height, this system can control and handle it effectively, once detecting that the running jibs interfere with each other automatically. While not with the same height, this system can also work effectively once acticipating the hook or cable of the higher tower crane may collide the jib or couter jib of lower one. Zone(obstacle) anti-collision Due to the complexity of some sites, the system can automatically and effectively determine up to 10 prohibited zones in which the hook or jib are not allowed to operate. Boundary protection Complicated environment usually exists around work site.The cxt/800 system can be preset with a up to 30-point boundary protection area in which the operating or over-flying of hook is not allowed. It can effectively prevent accielents from happening. Pre-alarm/alarm and control Cxt/800 system allows the operator to work at maximum efficient way and optimize the use of Crane. Once monitoring the pre-set data for possible collisions in crane interference area and over-flying of sensitise areas, there will be pre-alarm and visual and audible alarm and the system will stop the maneuver automatically to maintain a safety margin.
Tower crane load moment indicator, anti-collision and zone protection system for tower cranes.
150 ton crawler crane load moment indicator kato load moment indicator is a kind of Crane safety protection device , function as belows: 1)Alarm, in case of over load 2)Stop instantly in case of over load 3)Show Live Weight while in operation 4)Prevent overload 5)Crane Movement Control 6)Allows user to collect data in .txt format 7)Increase crane working life and life cycle ur LMI systems is an independence systems , can match to each kinds of cranes , no matter Manitowoc , terex , demag , liebherr , or gove , tadano , kato , sumitomo , kobelco , all of them can use our system.
WTZ-A300 Overload Limiter is a smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the lo
WTZ-A300 Overload Limiter is a smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the load reaches the given point of rated load, the acousto-optic alarm of the hoisting weight limiter will be triggered, with the switching value output displayed. The whole system is composed of sensor, connecting cable, microcomputer host and so on. The device is designed and manufactured in accordance with requirements of GB 12602-2009 Lifting Machinery Overload Protection Devices and GB / T 3811-2008 Crane Design Specification.
1. Display Load moment indicator(also called as"crane computer" or "safe load indicator") can be in form of LCD dynamic graphics and comprehensive display the various parameters in the process of work. As the main hook load, auxiliary hook load,boom Angle, length, working radius, etc.; Alarm function Sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system. When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing. Torque protection function Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security. 2. Data control box 3. SHL Rope Rider three-pully load sensor 4. Boom angle-length sensor 5. GJ type A2B switch
1. Display Load moment indicator(also called as"crane computer" or "safe load indicator") can be in form of LCD dynamic graphics and comprehensive display the various parameters in the process of work. As the main hook load, auxiliary hook load,boom Angle, length, working radius, etc.; Alarm function Sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system. When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing. Torque protection function Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security. 2. Data control box 3. SHL Rope Rider three-pully load sensor 4. Boom angle-length sensor 5. GJ type A2B switch
Technical characteristics: Safe load indicator JL-3000 uses industrial grade 5.7 inch LCD screen; Full patch design, waterproof, dust-proof, anti-vibration, small size and easy to disassemble; The casing is made of high-pressure cast aluminum material, beautiful, and the protection level is strong; Large-scale digital, analog CMOS integrated circuits, low power consumption; strong anti-interference ability, high reliability; The system has automatic fault detection function, which can automatically determine the fault location; The host adopts the touch button, long service life and high reliability; The system uses the latest modular integrated chip. Software can adjust the gain, the hardware without potentiometer, to solve the drift problem caused by the temperature change of the potentiometer, thus ensuring the stability of the dataï¼? With password setting to prevent parameter wrong settingï¼? With sound and light alarm functionï¼? Automatic compensation for sensors, 'temperature drift' and 'null drift'ï¼? With black box function, convenient to inquire any time.
RC-A5-I load moment indicator is applicable to all types of level-jib and flat-top tower cranes.The system adopts 51 single chip and 5 inch LCD,it indicates real-time working state of tower crane and record,once overload,it will cut off circuit and prevent dangerous operation,ensure crane safety operation. It provides the operator with actual and correct information on working states of tower crane on as follows through LCD:actual load,rated load,hook height,hook amplitude,slewing angel and wind speed etc.If the load reaches 50% or 80% specified moment,it will pre-alarm.If it reaches 105%,it will alarm and prevent the trolley automatically from moving outward and the hook from lifting upward.
WTAU brand WTL-A700 LMI system it's a kind of Crane safety protection device , function as belows: 1)Alarm, in case of over load 2)Stop instantly in case of over load 3)Show Live Weight while in operation 4)Prevent overload 5)Crane Movement Control 6)Allows user to collect data in .txt format 7)Increase crane working life and life cycle The Safe load indicator (SLI) has been designed to provide safety of the crane operation, with a continuous display of all the essential information needed to enable the crane to be used within its design parameters. SLIs have sensors to measure Load, Angle (from horizontal 0 to vertical 90 degree) & boom length. It has a 8 inch color touched LCD display for clear visibility, Overload alarm /Cut-off system, LED for overload, over hoist & Bypass on unsafe condition. WTAU WTL-A700 lmi function: load moment indication systems (LMI) help to prevent the operator from lifting excessive loads what could cause equipment collapse or tip over. Loads calculated by the LMI are verified against load charts. If a load exceeds the limit indicated in the chart, safety-related functions are activated and a cut-off is triggered. Anytime a load is lifted, the potential for overload is present. Accurate measurement of the load is critical to preventing dangerous overloads.
WTAU brand WTL-A700 LMI system it's a kind of Crane safety protection device , function as belows: 1)Alarm, in case of over load 2)Stop instantly in case of over load 3)Show Live Weight while in operation 4)Prevent overload 5)Crane Movement Control 6)Allows user to collect data in .txt format 7)Increase crane working life and life cycle The Safe load indicator (SLI) has been designed to provide safety of the crane operation, with a continuous display of all the essential information needed to enable the crane to be used within its design parameters. SLIs have sensors to measure Load, Angle (from horizontal 0 to vertical 90 degree) & boom length. It has a 8 inch color touched LCD display for clear visibility, Overload alarm /Cut-off system, LED for overload, over hoist & Bypass on unsafe condition. WTAU WTL-A700 lmi function: load moment indication systems (LMI) help to prevent the operator from lifting excessive loads what could cause equipment collapse or tip over. Loads calculated by the LMI are verified against load charts. If a load exceeds the limit indicated in the chart, safety-related functions are activated and a cut-off is triggered. Anytime a load is lifted, the potential for overload is present. Accurate measurement of the load is critical to preventing dangerous overloads.
We are specialized in the development and manufacture of construction machinery. The products feather advanced technologies and CAD &PRO/E is perfectly used. Our company now has good system and assembly of material pretreatment, large numerically controlled cutting equipment wielding application.
Technical characteristics: Safe load indicator JL-3000 uses industrial grade 5.7 inch LCD screen; Full patch design, waterproof, dust-proof, anti-vibration, small size and easy to disassemble; The casing is made of high-pressure cast aluminum material, beautiful, and the protection level is strong; Large-scale digital, analog CMOS integrated circuits, low power consumption; strong anti-interference ability, high reliability; The system has automatic fault detection function, which can automatically determine the fault location; The host adopts the touch button, long service life and high reliability; The system uses the latest modular integrated chip. Software can adjust the gain, the hardware without potentiometer, to solve the drift problem caused by the temperature change of the potentiometer, thus ensuring the stability of the dataï¼? With password setting to prevent parameter wrong settingï¼? With sound and light alarm functionï¼? Automatic compensation for sensors, 'temperature drift' and 'null drift'ï¼? With black box function, convenient to inquire any time.
Technical Parameters ·Operating Voltageï¼?AC 220V±20% & DC 24V ±15% optional 12V ·Working temperatureï¼? - 20â??ï½?+60â?? ·Relative humidityï¼? ï¼?95% ï¼?25â??ï¼? ·Work patternï¼? continuous ·Power dissipationï¼? ï¼?20W ·Comprehensive errorï¼? â?¤Â±3% ·Alarm control errorï¼? â?¤Â±3%
