This load moment indicator is a tower crane safety system. It has the following functions:
Working temperature:
-20 --- + 60
-40 --- + 80
Working humidity: í_ 95%/25
Combined error: 1%
Power supply: AC220V (to be customized according to clients requirement)
Parameter:
Rated load, actual load, trolley amplitude, hook height and moment percentage
Signal lamp&buzzer:
Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous response indicates alarm and relay outputs.
Other functions:
Records downloading; sensors self-diagnostic; applicable to tower crane with variety of falls.
This load moment indicator is a tower crane safety system. It has the following functions: Working temperature: -20 --- + 60 -40 --- + 80 Working humidity: í_ 95%/25 Combined error: 1% Power supply: AC220V (to be customized according to clients requirement) Parameter: Rated load, actual load, angle of the jib, hook height and moment percentage Signal lamp&buzzer: Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous response indicates alarm and relay outputs. Other functions: Records downloading; sensors self-diagnostic; applicable to tower crane with variety of falls. carton
INSTALLATIONS Weight Measurement Range: 0T~400T. Resolving Ability: 0.1T. Synthetic Errors: â?¤5%F.S. Equipped with Output Interface RS485. Working Condition: ï¼?20ï½?60. Relative Moisture under Working Condition: 90%RHï¼?20ï¼?. Working Voltage: AC220V±25%. Preset Output Contact Capacity: AC220V 7A. IP Grade: weight sensor with IP68; Monitor with IP64.
WTL-A220 Load Moment Indicator is a new type of smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the load reaches the given point of rated load, the acousto-optic alarm of the hoisting weight limiter will be triggered, with the switching value output displayed. The whole system is composed of sensor, connecting cable, microcomputer host and so on. The device is designed and manufactured in accordance with requirements of GB 12602-2009 Lifting Machinery Overload Protection Devices and GB / T 3811-2008 Crane Design Specification. With reasonable layout, easy installation, simple operation, WTLA220 Load Moment Indicator works well with high accuracy and other advantages Weight Measurement Range: 0T~400T. Resolving Ability: 0.1T. Synthetic Errors: â?¤5%F.S. Equipped with Output Interface RS485. Working Condition: ï¼?20ï½?60. Relative Moisture under Working Condition: 90%RHï¼?20ï¼?. Working Voltage: AC220V±25%. Preset Output Contact Capacity: AC220V 7A. IP Grade: weight sensor with IP68; Monitor with IP64.
Cxt/20p-i tower crane load moment indicator Working temperature: -20 --- + 60 -40 --- + 80 Working humidity: 95%/25 Combined error: 1% Power supply: ac220v (to be customized according to clients requirement) Parameter: Rated load, actual load, trolley amplitude, hook height and moment percentage Signal lamp&buzzer: Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous indicates alarm and relay outputs. Other functions: Records downloading; sensors self-diagnostic; applicable to tower crane with standard fall Remarks: cxt/20p-i is a basic model while cxt/20p-ir add the function of slewing indication and cxt/20p-if adds the function of anemometer.
his anti-collision device is a tower crane safety system. It has the following functions: CXT/800 system protection Tower crane Anti-collision protection If tower cranes are with the same height, this system can control and handle it effectively, once detecting that the running jibs interfere with each other automatically. While not with the same height, this system can also work effectively once anticipating the hook or cable of the higher tower crane may collide the jib or counter jib of lower one. Zone(obstacle) anti-collision Due to the complexity of some sites, the system can automatically and effectively determine up to 10 prohibited zones in which the hook or jib are not allowed to operate. Boundary protection Complicated environment usually exists around work site. The CXT/800 system can be preset with a up to 30-point boundary protection area in which the operating or over-flying of hook is not allowed. It can effectively prevent accidents from happening. Pre-alarm/alarm and control CXT/800 system allows the operator to work at maximum efficient way and optimize the use of Crane. Once monitoring the pre-set data for possible collisions in crane interference area and over-flying of sensitive areas, there will be pre-alarm and visual and audible alarm and the system will stop the maneuver automatically to maintain a safety margin.
Cxt/800anti-collision and zone protection system Cxt/800 system protection Tower crane anti-collision protection If tower cranes are with the same height, this system can control and handle it effectively, once detecting that the running jibs interfere with each other automatically. While not with the same height, this system can also work effectively once acticipating the hook or cable of the higher tower crane may collide the jib or couter jib of lower one. Zone(obstacle) anti-collision Due to the complexity of some sites, the system can automatically and effectively determine up to 10 prohibited zones in which the hook or jib are not allowed to operate. Boundary protection Complicated environment usually exists around work site.The cxt/800 system can be preset with a up to 30-point boundary protection area in which the operating or over-flying of hook is not allowed. It can effectively prevent accielents from happening. Pre-alarm/alarm and control Cxt/800 system allows the operator to work at maximum efficient way and optimize the use of Crane. Once monitoring the pre-set data for possible collisions in crane interference area and over-flying of sensitise areas, there will be pre-alarm and visual and audible alarm and the system will stop the maneuver automatically to maintain a safety margin.
Supplier: Tower crane load moment indicator, anti-collision and zone protection system for tower cranes
Hello, We are offering our highly sought-after tower cranes at a special discount, which are favored by many companies in the construction industry. As HYZH ENERGY, we have been providing the highest quality and reliable equipment to our customers in China for 25 years. In line with this, we would like to offer you a special tower crane deal that meets your business needs. Please review our product catalog for detailed information and kindly provide us with the model and quantity you are interested in. Under this special offer, we are introducing our products to the market at a competitive price. For detailed pricing and further information about our tower cranes, please contact us Please note that at HYZH ENERGY, customer satisfaction is of utmost importance to us, and we are committed to providing you with the highest quality products
150 ton crawler crane load moment indicator kato load moment indicator is a kind of Crane safety protection device , function as belows: 1)Alarm, in case of over load 2)Stop instantly in case of over load 3)Show Live Weight while in operation 4)Prevent overload 5)Crane Movement Control 6)Allows user to collect data in .txt format 7)Increase crane working life and life cycle ur LMI systems is an independence systems , can match to each kinds of cranes , no matter Manitowoc , terex , demag , liebherr , or gove , tadano , kato , sumitomo , kobelco , all of them can use our system.
