We have been in this line for many years, our products is very competitive and resonable . Wooden cases, 100kg, 620x460x1530
The digital compression testing machine with dedicated universal computer software for reading purpose, self operating & monitoring has been designed to meet the need for a simple, economic and reliable means to test concrete / cubes etc. For its compressive strength. The design expressive of simplicity, both of construction and operation, makes the machine easy to use and maintain. The unit is compact, making it useful for site and Laboratory applications. Features: •High stability four pillar load frame. •Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading. •A precise large diameter spherical upper platen for optimum results. •Motorized hydraulic power pack or pumping unit with rapid approach and automatic over load protection. •Comes standard with safety guards on all four sides The complete unit comprises a loading unit which is of four pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. The loading capacity is of 2000 kn, cubes up to 200 mm & cylinders up to 150 mm dia x 300 mm height can be tested using the appropriate spacers. Pumping unit attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing. Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually.
200 tones in different models. Portable models are very convenient and useful for site use where carrying frequently the specimens for testing in a standard laboratory is inconvenient and uneconomical. With special attachments, the machines can also be used for bricks, hallow or solid concrete blocks, using appropriate capacity machine. In general compression testing machine consists of a load frame with suitable platens and a pumping unit with pressure gauge, either hand operated or electrically-cum-hand operated. Load frame and pumping unit are connected by pressure pipes. Wooden packing
The AEC1112- Computerized Universal Testing Machine with a maximum load capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton with the provision of testing various samples of metals and its different alloys for the testing in tensile mode for round and flat specimens as per the national and International standard like ASTM, DIN, ISO, EU and IS standards etc. capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton.
Motorized compression tester Universial testing machine Concrete pipe & product tester Program cement autoclave Standard wooden box
1.Description Chase friction testing machine is used to evaluate the frictional characteristics of material in braking system in accordance with the SAE J661,GB 5763-2018 and GB/T 17469-2012. Chase machine is suitable for small bench test of M1, M2, N1, O1 and O2 vehicles brake linings. This machine is widely used for product formulation R&D, Quality control and Certification etc. 2.Principle A constant pressure is applied to the sample,which will be pressed against the inner surface of the friction drum which rotates at a certain speed, so a friction force will be generated along the tangent direction of the contact surface. The friction coefficient of the tested sample can be determined by measuring the pressure and friction force. During the test, the Chase friction tester controls the temperature change at any time according to the requirements. The drum outer ring is used to assist the heating tube heating and the back suction cooling, so that the temperature change at the sample is stable and the temperature measurement accuracy is higher. 3.Features (1)Loading by Pneumatic servo with high precision control. (2)Temperature of friction drum is adjustable to adapt to different test requirements and different climatic condition. (3)Rubbing speed can be set freely between 0 and 1000 RPM. (4)The maximum load is up to 2000N. (5)This machine is controlled by PC. Speed, loads, temperature and test time can be preset by software. Test results are saved in computer. 4.Standards SAE J661, SAE J866, GB 5763-2018, GB/T 17469-2012, 5.Specifications Speed 0 to 1000 RPM Load 0 to 2000 N Temperature 0-600 (1112) Heating power 6KW Friction drum Ф277mm Power AC 380V Weight Approximate 2100kg
1. Size of concrete specimens for compression strength test Concrete cubic specimen: 150X150X150mm, 100X100X100mm, 200X200X200mm Cylindrical concrete specimen: diameter 150X300mm, diameter 100X200mm, diameter 200X400mm 2. Brief introduction of concrete compressive strength test procedure 1) Placing the concrete specimen---place the test specimen on the lower bearing block. Carefully align the axis of the specimen with the center of thrust of the spherically seated block. 2) Apply the load continuously and without shock until the specimen fails and record the maximum load carried by the concrete specimen during the test. Note the type of failure and the appearance of the concrete. 3.Relative test method GB/T 50081 standard for test method of mechanical properties on ordinary concrete ASTM C39 standard test method for compressive strength of cylindrical concrete ASTM E74 practice of calibration of force-measuring instruments for verifying the force indication of testing machine 4. Specifications for concrete compressive strength testing machine Max. capacity: 3000KN( lower or higher capacity can make to order) Grade of testing machine: grade 1 Distance between upper and lower compression platen: 320mm Stroke of piston:50mm Size of upper and lower compression platen:375X375mm Weight :about 900kg
1. Introduction and test principle of compression strength measuring The compression testing machine is to measure compression strength of corrugated boxes in the situation of pressure and protect functions of packages for the objects filled in the packages. Test principle: (1) Corrugated boxes compression strength test, loading to the corrugated boxes using a compression testing machine at a certain constant rate untill corrugated boxes are broken or till certain load or displacement are reached. (2) Corrugated boxes stacking test, loading a certain force to the corrugated box using a compression testing machine untill corrugated box is broken or sustain a certain time period. When measuring deformation of corrugated box during compression test, an original load should be set as a datum point. The datum point can refer to the following chart: Average compression force(N)Original force(N) 101-200 10 201-1000 25 1001-2000 100 2001-10000 250 10001-20000 1000 200001-100000 2500 2. Functions of compression testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 3. Specification of compression testing machine 1 Max. Load 20KN 2 Resolution of test force 1/300000 3 Resolution of displacement 0.001mm 4 Precision of crossbeam displacement 0.5% 5 Precision of deformation 0.5% 6 Measuring range of test force 1%-100%FS 7 Relative error of test force 1% 8 Relative error at zero point 0.5% 9 Speed of crossbeam 0.01-500mm/min 10 Precision of crossbeam speed 1% 11 Speed range of load 0.005%-5%FS/s 12 Precision of load speed When speed is less than 0.05FS/s, precision is within 1% of set value, when speed is more than 0.05FS/S, precision is within 0.5% of set value 13 Speed of deformation 0.005%-5%FS/s 14 Precision of deformation speed When speed is less than 0.05FS/s, precision is within 1% of set value, when speed is more than 0.05FS/S, precision is within 0.5% of set value 15 Stroke of crossbeam 900mm 16 Effective tensile height 650mm 17 Effective test span 400mm 18 Effective compression height 800mm 19 Diameter of compression platen 100mm 20 Voltage and power 220V,50Hz, 700W 21 Dimension of main machine 650X450X1650mm 22 Weight of main machine about 300kg
Quick Details Place of Origin: Shandong, China (Mainland) Brand Name: Zhongchuang Model Number: ZCTL-Z50kN Power: Electronic Usage: Spring Tester Product name: 50kN Computer Control Spring Compression Testing Machine Test force: 50kN Resolution of test force: 1/500000 Stroke range: 1%-100% Resolution of displacement: 0.001mm Min reading value: 10N Compression space: 600mm Diameter of plates: 300mm Test speed: 0.01-300mm/min Power supply: AC220V 10% 50Hz Packaging & Delivery Packaging DetailsSpecial wooden packing box for export Delivery Time15 working days after payment Specifications Data Max test force50kN Min reading value10N Stroke range1%-100% Resolution of test force1/500000 Accuracy of displacement0.01mm Compression space600mm Diameter of plates300mm Test speed0.01-300mm/min Power supplyAC220V 10% 50Hz Size of valve spring tester600*400*1750mm Weight of valve spring tester400kg Grade of valve spring testerGrade 1 Power supplyAC220V 10% 50Hz Testing Machine Img The 50kN Computer Control Spring Compression Testing Machineis developed and produced by our company, which is mainly used to test the compression strength of all kinds of compression springs and elastic components.
Our Exf6306 is portable and with competitive price. Its convenient to carry for the company and the person who works in jewelry recycle field. Detailed features: Analysis Elements: Au Ag pt PdRh Ru CuZn NiCd Analysis Range: 10%99.99% Test point dimension: 12mm Sample Chamber Size: 090 mm Spectrometer Size: L550 mm*W350mm*H250 mm Test Time: Confirm the elements in 13 seconds, operator could set the time for testing the elements in density.) Test Precision: +/-0.2% (The Precision could keep 0.2 after several repeated test) High Pressure Template: 450Kv X-Ray Source: Mo Material X-ray light tube( Wind Cool, No radiation) Max. Power: 100W Weight: 25Kg Detector: Hermitic Proportional Counter with Micro processor Coated layer measurement: Coated layer thickness Range
The overall design of EXF6900 is professional and mature, large chamber is designed for various nonstandard samples in jewelry industry, specialized in large material analysis. Detailed features: Analysis Elements: Au Ag pt PdRh Ru CuZn NiCd Analysis Range: 10%99.99% Test point dimension: 12mm Sample Case Size: 090 mm Spectrometer Size: L500 mm*W450mm*H350 mm Test Time: Confirm the elements in 13 seconds, operator could set the time for testing the elements in density.) Test Precision: +/-0.15% (The Precision could keep 0.15 after several repeated test) High Pressure Template:450Kv X-Ray Source: Mo Material X-ray light tube( Wind Cool, No radiation) Max. Power: 120W Weight: 35Kg Detector: Hermitic Proportional Counter with Micro processor Coated layer measurement: Coated layer thickness Range
Detailed Product Description 7200-based precious metals detector : Unique hardware: . Comply with the most stringent standards for radiation protection at the same time, samples have simple patterns to place and replace supplies. ,,32,,,. Probe target high performance, long life; a new 32-bit hardware and software systems, reliability, high efficiency; the camera is equipped with high-resolution positioning systems, measuring more intuitive, convenient, fast. . Fixed configuration with many axial fixture Samples.,,,,. System parameters of liquid crystal display apparatus, the operator may at any time through the screen to observe the internal hardware to the device parameters such as voltage current temperature and so on, can effectively extend equipment life.MoX( Excitation source: Mo target X-ray tube air-cooled (no radiation) 12mm Size measurement points: 1 ~ 2mm :400 mm+: 300mm+: 090 mm Samples Room: Long 400 mm + width: 300mm + high: 0 ~ 90 mm sample imaging system to enlarge , Software: menu-driven software with the hardware parameters and data to assess and adjust the calculation Computer: select configuration Detector: fixed gas proportional counter closed semiconductor microprocessor-controlled detector and readout circuitOther specifications: :100127200240V,50/60 Hz Voltage: 100 ~ 127 or 200 ~ 240V, 50/60 Hz :128W Maximum Power: 128W :500mm*500mm*350mm Department biggest size: 500mm * 500mm * 350mm :40kg Weight: 40kg Specifications 0.3%99.99% Analysis range: 0.3% ~ 99.99% Measurement time: Adaptive ¦ 0.1% Measurement accuracy: ¦ 0.1% Test environment: normal ambient temperature Au Ag Pt PbRh Ru CuZn Ni CdW Analysis of elements: Au, Ag, Pt, Pb, Rh, Ru, Cu, Zn, Ni, Cd W XX X-ray sources: X-ray fluorescent tubes 450Kv High-pressure device: 4 ~ 50Kv Analysis: Multi-Channel Analog :Windows2000/Me/XP Operating System: Windows2000/Me/XP Coating measurement:
Detailed Product Description 7800-based precious metals detector : Unique hardware: . Comply with the most stringent standards for radiation protection at the same time, samples have simple patterns to place and replace supplies. ,,32,,,. Probe target high performance, long life; a new 32-bit hardware and software systems, reliability, high efficiency; the camera is equipped with high-resolution positioning systems, measuring more intuitive, convenient, fast. . Fixed configuration with many axial fixture Samples. EXF7800EXF7200,,,,,,. EXF7800 at the platform on EXF7200 class integrated industrial computers, upgrade the display screen and the circuit will no longer need an external computer; major fashion modeling with multi-node pre-boot devices and real-time monitoring system; with electric door lock, making day-to-day management of more convenient ; the installation of automated radiation leakage device, the initiative to ensure the safety of use; with openings for electrical devices, the test more easily. MoX( Excitation source: Mo target X-ray tube air-cooled (no radiation) 12mm Size measurement points: 1 ~ 2mm :400 mm+: 300mm+: 090 mm Samples Room: Long 400 mm + width: 300mm + high: 0 ~ 90 mm sample imaging system to enlarge , Software: menu-driven software with the hardware parameters and data to assess and adjust the calculation Computer: select configuration Detector: fixed gas proportional counter closed semiconductor microprocessor-controlled detector and readout circuit Other specifications: :100127200240V,50/60 Hz Voltage: 100 ~ 127 or 200 ~ 240V, 50/60 Hz :120W Maximum Power: 120W :500mm*500mm*400mm Department biggest size: 500mm * 500mm * 400mm :48kg Weight: 48kg Specifications 0.3%99.99% Analysis range: 0.3% ~ 99.99% Measurement time: Adaptive ¦ 0.1% Measurement accuracy: ¦ 0.1% Test environment: normal ambient temperature Au Ag Pt PbRh Ru CuZn Ni CdW Analysis of elements: Au, Ag, Pt, Pb, Rh, Ru, Cu, Zn, Ni, Cd W XX X-ray sources: X-ray fluorescent tubes 450Kv High-pressure device: 4 ~ 50Kv Analysis: Multi-Channel Analog :Windows2000/Me/XP Operating System: Windows2000/Me/XP Coating measurement:
Description Dual display screen design, professional fashion appearance with multi-node pre-start installations and the real-time monitoring system; The cover locks and electronic locks are making day-to-day management more convenient; EXF9500 have integrated industrial computers, hence, no need to connect with an external computer; Its also installed the automated anti-radiation device in order to ensure the user security. Electric devices for opening cover makes the test easier. Ultra-high resolving power can easily settle any complexity requirements for non-destructive analysis the in precious metals industry. Among the superlative spectrometers in precious metals industry. EXF9500 is the best competitive one. Detailed features: Analysis Elements: Au Ag pt PdRh Ru CuZn NiCdIn OsIr Analysis Range: 0.01%99.99% Test point dimension: 12mm Sample Chamber Size: 090 mm Spectrometer Size: L500 mm*W500mm*H450 mm Test Time: Confirm the elements in 13 seconds, operator could set the time for testing the elements in density.) Test Precision: +/-0.01% (The Precision could keep 0.01 after several repeated test) High Pressure Template: 450Kv X-Ray Source: Mo Material X-ray light tube( Wind Cool, No radiation) Max. Power: 144W Weight: 60Kg Detector: Si-Pin (Cooling: Semiconductor) Coated layer measurement: Coated layer thickness Range
2. This testing machine mainly use computer and software to control the whole system, which can make the accuracy more precise. The hydraulic cylinder is imported from germany, which is high flow, good circularity and high availability. This machine can be used to test the heavy duty springs of haulage motor. This machine can adopt the electro-hydraulic servo testing system to operate. 3. The all parts of equipment can be maintained and repaired. The main functions of this machine is as follows, it can use fixed deformation or fixed load. Measurement system can be automatic zero, automatic calibration. Computer real- …
This machine is produced in wintime machinery co., ltd. It can test a variety of heavy duty springs such as locomotive springs¡¡écar springs or leaf springs. This testing machine mainly use computer and software to control the whole system, which can make the accuracy more precise. The hydraulic cylinder is imported from germany, which is high flow, good circularity and high availability. This machine can be used to test the heavy duty springs of haulage motor. This machine can adopt the electro-hydraulic servo testing system to operate. The all parts of equipment can be maintained and repaired. The main functions of this machine is as follows, it can use fixed deformation or fixed load. Measurement system can be automatic zero, automatic calibration. Computer real-time display test amplitude, test frequency, the number of fatigue. The load capacity is up to 500kn, and the test space is about 600mm(wide)* 1700mm(length), which can be adjust up and down. The max.Test amplitude is ¡¨¤40mm, and the frequency is about 0.1hz to 4hz. The maximum power should be 380 v ac, 110 kw. This machine can match different kinds of heavy duty springs such as locomotive springs¡¡écar springs or leaf springs.
1.Model:WDW-100 2.Product name:computerized electrical universal testing machine 3. Applications of testing machine This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 4. Features of testing machine 1) Adopting aluminum alloy cover, with attractive streamline structure 2) Mainly used to test mechanical properties for metal, non-metal and composite materials 3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications 4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out. 5) With remote control box to realize speed adjustment of crossbeam, flexibly and freely switched 6) With functions of automatic return to original position, intelligently, efficiently, quickly 7) With limit position function of any working position and over voltage, over current protection functions, reliable and safe 8) With many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control 9) Switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison. 5.Spec. of testing machine
his series testing machine is suitable for tensile, compression, bending, shearing, peeling and tearing test of metal and nonmetal materials, such as rubber, plastic, electrical wire and cable, composite, profiled bar, bar metal, board, spring, components and so on. It confirms to ISO 75001ú¼ASTM A370, ASTM E4 ASTM E8 and JIS, DIN, BSEN testing standards. AD800 in this machine is whole digit multi center closed loop measuring and control system. It adequately absorbs advanced functional characteristics and integrates the latest international professionally developed measuring and control system. Control software can automatically finger out routine data, such as tensile strength, yield strength, modulus of elasticity, extend rate after rupture, non-proportional extend strength RP0.2, etc. It can adopt many kinds of controlling modes, such as constant force, constant displacement, constant deformation, and real time display many testing curves of force-displacement, force-time, stress-strain. These curves automatically switch. Testing process control and data processing conform to the requirements of International standards. This machine is beautiful, multifunctional, safe and easy. Parameters: WDW-1 WDW-2 WDW-5 Maximum force: 1KN 2KN 5KN Accuracy: í_í+1% (0.5% as special order) Measuring range of force (KN): 0.2%--100%FS Resolution of force: 1/200000 of maximum force and no subsection of all scale Accuracy of displacement measuring: í+0.5% Resolution of displacement: 0.03ª¦m Speed adjusting range of displacement: 0.001-500mm/min Accuracy of deformation measuring: í+0.5% Range of deformation measuring: 2%í½100%FS Speed adjusting range of force; 0.005-5%F.S / S Speed controlling accuracy of force: ¿Qí+2.0% of the set value (speedú+0.05%FS/S) ¿Qí+0.5%/í+1.0% of the set value ( speed¿R0.05%FS/S) Speed adjusting range of deformation: 0.005-5%FS/S Speed controlling accuracy of deformation:¿Qí+2.0% of the set value (speedú+0.05%FS/S) ¿Q í+0.5% of the set value ( speed¿R0.05%FS/S) Valid tension testing space: 800 Compression testing space: 700 Clamping sample: Flat and round sample Power supply: 380V/220ú¼50/60Hz Working environment: Room temperature 10íµí½30íµ, relative humidityí_80% Base configuration : Panasonic servo motor, precision photoelectric encoder Weight(Kg): 300
1íóHost machine is with double column type, which make the conformation compact and arrangement reasonable. 2íóAdopt precise electro-hydraulic servo proportional valve. The speed is fast and the controlling accuracy is high. 3íóMechanic limit pistons protection assures the safety of testing. 4íóSetup overload protection which acn stop automatically,when the load exceeds the maximum by 2-5%. ó=íóControlling system This machine is with digital and multi-channel loop of measuring and controlling system. It adopts force closed loop control technique and has the function of constant stress loading and load keeping. Loading speed can be arbitrarily set and the testing curves can be real time displayed. Characteristics of softwareú¦ 1íóThe software integrate bending resistant test and compression resistant test procedure , such as bricks, cement, concrete and mortar. 2íóThe software divide testing procedure as follows: tile compression resistant executive program(GB13544í¬2000), cement compression resistant testing program (GB17671í¬1999), concrete specimen testing program(GB/T5001í¬2002)and mortar testing program(GB170í¬90). 3íóThere is no subsection in all process. (Or classify according to the requirements of customers.) 4íóComplete test in batch automatically and adjust breaking of specimen. 5íóWindows Style can be controlled by human or computer.It is easy to manage and control,collect and calculate. 6íóRecord and save testing datas automatically. Overall dimensionú¿mmú¬ Host machine 950í-650í-1405 1120í-660í-650 910í-580í-1800 910í-580í-1940 HPS í¬ í¬ 950í-650í-1405 950í-650í-1405 Weightú¿kgú¬ 750 850 3050 3250
Product Description: 1. Compact structure of the whole machine with small dimensions meets the requirement of drilling in limited space and tunnel transportation. 2. With two optional drive modes of the drive unit, the drilling rig has a wide adaptability of strata. 3. Extendable mast (or optional box-type mast) is adopted to meet the requirement of long casing drilling construction, which improves the working efficiency. 4. Integrated visualized pressure feeding system can regulate the drilling pressure accurately according to the drilling depth. 5. With the configuration of 4 hydraulic supporting legs, it can realize rapid horizontal adjustment and transportation without crane.
