Testing Machine

Usage: Glass Testing Instrument Power: Electronic Brand Name: Apex-tech Warranty: 12 months weight: 10 tons Hydrostatic test machine on couplings Equipments for the hydrostatic testing of GRP sleeve couplings with by width of 1.5 meters and diameters from 30 to 3000 mm that allows to test the single sleeves and also according to the BS 5480 standards Appendix K and M and pressure of 2.5 to 30 bars. the test consists on checking the tightness with the rings and the tightness ring. the machine is composed by one set of plugs for the test, two heads supporting the Plugs, oil-pressure system for the closing of the plugs, a hydraulic unit and one electrical board plus a set of Sleeve plugs on pipes up to DN 3000.

Standards as follow GB/T2039-1997 Metallic materials--Creep and stress-rupture test in tension HB5151-1996 Metallic materials--Creep and stress-rupture test in tension HB5150-1996 Metallic materials--Stress-rupture test in tension GB/T10120-2013 Metallic materials--Stress-rupture and relaxation test in tension JJG276-88 Creep and stress-rupture testing machine ASTM E139 Metallic materials--Creep and stress-rupture testing methods Technical spec, 1.Size of mainframe LxWxH720mm550mm2280mm, weight: 560KG 2. Specification of mainframe 1)Max testing force 50kN 2)Max range of testing force 1%FS--100%FS 3)Controlling stability of testing force ±0.5% 4)Deviation range of testing force±0.5% 5)Speed of pull rod 0.001100mm/min 6)Max stroke of pull rod 220mm 7)Coaxiality of upper-below chuck8% 8)Power AC 220V 1kW 9)UPS power supply of one hour Specification of high temperature system 1)sturcture of heating furnaceone to one 2)Heating control methodthree sections heating wire heating, section control and program control, using transformer voltage regulation control. 3)Diameter of heating furnace wireΦ5mm 4)Operating temperature 300-1200 5)Length of heating bandâ?¥200mm 6)Surface temperature rise90 7)Deviation of furnace temperature8% a)Temperature fluctuation±2 b)Temperature gradient3 4.Specification of deformation 1)Range of deformation 0ï½?12mm 2)Resolution of deformation0.001mm 3)Deviation of deformation±0.002mm 4)With imported TTL output mode in germany that resist for strong electromagnetic environment. 5.Specification of load measurement 1)Range of loadMax is 50KN 2)Deviation of static loading±0.04%FS 3)Opereating specification of temp-55~90°C 4)Temperature compensation 6.Specification of servo drivers 1)With A6 Panasonic servo, power:500W 2) THK ball screw 3) Sumitomo Reduction gear system

It is mainly used for testing dynamic and static mechanical properties of various metals and non-metallic materials, including stretching/compressing/curving dynamic-static fatigue testing of high polymer materialã??biological material as artificial blood vesselã??soft tissueã??boneã??bone plateã??interbody fusion cageã??kneeã??spine fixatorã??metal coatingã??hip jointã??intramedullary nail etc. According to national standard and ISO/DIN to proceed testing and data supplying, drawing testing curve and printing reports automatically, which is extremely popular in scientific research institutionsã??collegeã??medicineã??bioengineering etc. Standards as follow:

This system can meet the requirements of biaxial fatigue testing of cross, uniaxial fatigue testing of clintheriform and tensile-compression fatigue testing of cylindrical under high-low ambient temperature. Applying to the research of biological tissue, medical devices, textiles, rubber materials, plastic film, metal, composite materials.whats more, it has concentric loading adjustment mechanism and temperature compensation system of hydraulic clamp. Model DPL-9010/2 Qty of channel control 4 Laoding force Static max loading force 100KN Loading force of dynamic 100KN Actuator Qty :4 Loading frequency 0.01H½?20Hz Flexible rate 0ï½?340mm/s without adjustment Dynamic property Loadingï¼?±100kNï¼?xAmplitudeï¼?±0.5mmï¼?xFrequency(20Hz) Loading accurcy ±0.5%FS Displacement accuracy ±0.5%FS High-low ambient temperature -196ï½?350 Specimens Workspace 840mm x 840mm Testing specimens cross Widthâ?¤50mmï¼?Lenghthâ?¤350mmï¼?Thicknessâ?¤30mm square Lenghthâ?¤350mmï¼?Thicknessâ?¤30mm cylinder Norm stretch and compressure Control mode Force,displacement,time,loading rate,gradation loading,unidirection loading Mainframe Size 3800mm(L)X2300mm(W)X3800mm(H)

CSPL-20 testing machine is a high frequency vibration fatigue testing technique based on the theory of electromagnetism striction.This machine is mainly used for metal ultra-long life fatigue testing at room temperature, It can complete 104-1010 weeks of constant amplitude tensile and compression fatigue testing of 20kHz frequency. Generally, it takes 3.2 years to reach 1010 cycles at 100Hz frequency, CSPL-20 only takes 6 days to shorten the ultra-long life fatigue testing time.According to standard, all parts and instruments comply to international(SI) standards. Noise conform to national and industrial standard. The equipment is the domestic advanced level, with reliable control function, which adapt to long-term, stable, safety, reliable production demand. The most advanced ultrasonic device imported by Branson company, its more convenient of processing and maintain with excellent service. The equipment is the domestic advanced level, with reliable control function, which adapt to long-term, stable, safety, reliable production demand. The most advanced ultrasonic device imported by Branson company, its more convenient of processing and maintain with excellent service. Similarity: Signal generator of ultrasonic are same, testing theory and technology are same. Differentia: Similar products of Daojin can only complete the cylindrical specimens testing , DCSPL-20 can also complete the plate specimens testing. Dex advantage: we can carry out multiple ultrasonic fatigue test load and extending test program based on DCSPL-20. Operation conditions: control mode of computer setup and control. Power supply, AC220V±10%,50Hz±1,2HzKW Model CSPL-20 Frequency 20KHz±500Hz Proof stress range Normal stress 100ï½?1000MPa, constant stress Load type Symmetry tension-compression fatigue testing Specimens smoothly cylindrical and notch specimens Smoothly clintheriform and notch smaple. Control mode Adopt computers setup and control testing Power AC220V±10%ï¼?50Hz±1Hz,2KW

Zhejiang youji machinery technology co., ltd. Valve test bench valve testing Jld butterfly valve test bed is a special type used for butterfly valve performance tests. The machine set of mechanical, electrical, fluid and hydraulic pressure device for circulating water system in one, table with clamping claws clamping cylinder direct-drive valve to achieve the test, so that the claw force uniform, clamping reliable, clip bear claw radial mobility features with cylinders, connecting rod, achieving simultaneous radial movement of claws to ensure the size of the diameter of the butterfly valves of different tests, when sealed, if the butterfly valve with a clamping flange, not the butterfly orchid from a direct extension of hydraulic clamps are clamped butterfly valve plane can be tested. The aircraft can be directly whether the leaking valve cavity bubbles or risk, such as the test intensity blind stamped on the plate can be sealed in the machine can do the valve electric device on the torque and 90-degree opening and closing test. The machine comes with hydraulic pressure for the pumps, storage media can be recycled to use. The use of clean water must be added anti-rust agent, so as not to rust and impact of post-test valve hydraulic pressure device for the use of normal function.

Spin material: Collagenous, chitin fiber, salt alginate fiber, vinylon, kevlar, pan, pvc, viscose rayon, lyocell, modal, tencel, newcel, chitosan fiber, soybean protein fiber , milk protein fiber and so on.

Spin material: Collagenous, chitin fiber, salt alginate fiber, vinylon, kevlar, pan, pvc, viscose rayon, lyocell, modal, tencel, newcel, chitosan fiber, soybean protein fiber , milk protein fiber and so on.

Its new floor type universal material testing machine which applied by latest design and producing skill to have strong structure, saving transmission power and electric current without specific power system. Undoubtedly we still keep the advantage for testing precision, simply operation, expand strong. Its the best choice for material testing machine.