According to the wire diameter and opening, we can offer standard welded wire mesh or heavy type welded wire mesh. Differernt processing means we offer for your choice include: hot-dip galvanized welding wire mesh; hot-dip galvanized before welding wire mesh; electric-galvanised after welding wire mesh; electric-galvanised before welding wire mesh. In accordance with the customer's request.
Rectangular Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheets used to reinforce concrete slabs. *SPECIFICATIONS* Material Carbon Steel Grade 500 Mpa Length 6000mm x 2400mm Main Wire: 6.75@100, 7.60@100. 8.60@100, 9.50@100, 10.70@100, 11.90@100 mm Cross Wire: 7.60@200 mm *STANDARDS* Manufactured in accordance with AS/NZS 4671:2019 ACRS Certified NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS) *PACKAGING* Unit of Measure Sheets Pack Type Bundles FCL Quantity 25MT
Concrete Reinforced Mesh is widely used as bridge reinforced mesh, road construction mesh, floor reinforced mesh, trench mesh, Concrete slab mesh, Masonry mesh and brick wall reinforced mesh, which is used in construction reinforcement, the ground for the tunnels, bridges, highway and airport, wharf and wall. It is a type of convenient and economical reinforcement option for modern concrete structures. Specification of concrete reinforced mesh: (1)Material:plain steel bar, stainless steel rebar rods. (2)Steel rods style: ribbed or smooth. (3)Rebar Diameter: 3 mm - 40 mm. (4)Mesh shape: square or rectangular . (5)Distance between rods : 50,100, 150, 200,300, 400 mm. (6)Mesh sheet width: from 650 mm to 3800 mm. (7)Mesh sheet length: 850 mm, 6 m, 9 m, 12 m. Features of concrete reinforced mesh: (1)High strength. (2)Anti-crack and anti-shock. (3)Hot-dip galvanized or epoxy coating after the manufactures (4)Anti-corrosion, acid-resisting. (5)Easy to install Applications of concrete reinforced mesh: (1)Concrete reinforced mesh is used as bridge reinforced construction and building, like bridge girders, bridge spans, bridge decks. (2)Concrete reinforcing mesh used in median barriers, tunnel segments, box culverts, airport and wharf. (3)Concrete reinforcing mesh used in residential, industrial and road construction, such as concrete footpaths and industrial and commercial ground slabs, precast panel construction and residential slabs and footings. (4)Constructional uses: block slab structure reinforcing, and hollowed slabs reinforcement, building wall reinforcement and support wall reinforcement. (5)Used as coal mine supporting mesh for coal mine roadway supporting.
1.This machine adopts synchronous control technique, both welding time and cent-control welding is supervised by ipc ( industrial computer and chassis). 2.It adopts modularization design, so it is easy to improve the machine's function and feacure. 3. The line wires are fed automatically and continously, so it saves much welding time to wait. Feeding position is accurate, the edges are regular and also could be adjustable. 4. There is a big hopper for cross wires, it could contain one ton wires, in this case, it saves much labor to add wires. 0v Overall dimention:20*5*2.3m Gwc-2500d (5-12 Wire diameter:5-12 Number of electrodes:24 Space of line wire:100-200 Space of cross wire:50-200 Welding speed:50 times /min Rated voltage:380v Width of mesh:2500mm Rated electrical power:12*125kva Overall dimention:20*5*2.3m Contace person :anny Website: www.Weldingmachine.Cn Tel:15803186013 Hebei jiaoyang wire mesh machine co., ltd. Website: www.Weldingmachine.Cn Post code:053600 The main welding machine is pocked by plastic and spare parts is parked by wooden box
Concrete reinforcing mesh 1.Wire diameter:3mm-14mm 2.Mesh:5*5cm, 10*10cm, 10*20cm, 20*20cm, 10*30cm, 30*30cm 3.Iso & sgs Packed with the iron or wooden pallet.
Square Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheet used to reinforce concrete slabs. *SPECIFICATIONS* Material Carbon Steel Grade 500 Mpa Length 6000mm x 2400mm Main Wire (mm): 6.00@200, 6.75@200, 7.60@200, 8.60@200, 9.50@200, 7.60@100 mm *STANDARDS* Manufactured in accordance with AS/NZS 4671:2019 ACRS Certified NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS) *PACKAGING* Unit of Measure Sheets Pack Type Bundles FCL Quantity 25MT
Trench Mesh products in 6.0m x (200mm, 300mm, 400mm, and 500mm) sheet sizes and are a general-purpose ribbed mesh sheet used to reinforce concrete slabs with a narrow profile. *SPECIFICATIONS* Material Carbon Steel Grade 500 Mpa Length 6000mm x (200mm, 300mm, 400mm, or 500mm); width is dependent on number of wires (3,4, 5, or 6) Main Wire: 7.60@100, 10.70@100, 11.90@100 mm Cross Wire: 4.00@300, 4.75@300 mm *STANDARDS* Manufactured in accordance with AS/NZS 4671:2019 ACRS Certified NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS) *PACKAGING* Unit of Measure Sheets Pack Type Bundles FCL Quantity 25MT
Z248.5/248.6/348.5/Z348.6/Z442.5/Z442.6/Z558.5/Z558.6 Grids and reinforcing meshes Reinforcing meshes is manufactured compliance with Swiss Standard SIA 16211 S550. It is different sides wire in the whole sheet as K188/K335 in longitudinal direction. Itâ??s used widely on construction footing foundation,flooring slabs,foundation beams,bridge and piers and tunnel of coal,mine,subway,and trian reinforced and support. Heyou wire mesh is a professional manufacturer for reinforcing meshes which can comply to Chinese standard ,Australian/New Zealand standard,Germany Standard, Normes Francaises,Swiss Standard, Osterreichische Norm etc. Our factory was approvaled by ISO.All the reinforcing meshes are follow to international standard.We have enough exporting experiences.Our salesman are more than 10years working experience in this fields. Our workers which has strong and skillfull are expert, they produce the reinforcing meshes better than tyro. They made reinforcing meshes has firmly welding spot,accurate wire diameter,mesh space and panel size,clearly ribbed,non rusted. The specification of reinforcing meshes conformance with Swiss Standard SIA 16211 S550 mesh type Pitch of wires(mm) diameter of wire(mm) Per meter area sqm/m Dimension of Mesh Area of Mesh(sqmm) Mass (kg/sqm) Weight of Mesh(kg) pL pC dL dC long cross L(mm) B(mm) K188 6 6 150 150 188 188 5000 2000 10 3.091 30.192 K335 8 8 150 150 335 335 5000 2000 10 5.372 53.72 Z248.5 6/4.5 7 150 150 248 257 5000 2000 10 3.422 34.22 Z248.6 6/4.5 7 150 150 248 257 6000 2000 12 3.472 41.668 Z348.5 7/5.5 8 150 150 348 335 5000 2000 10 4.628 46.28 Z348.6 7/5.5 8 150 150 348 335 6000 2000 12 4.694 56.326 Z442.5 8.0/6.0 9 150 150 442 424 5000 2000 10 5.857 58.57 Z442.6 8.0/6.0 9 150 150 442 424 6000 2000 12 5.94 71.282 Z558.5 8.5/7.5 10 150 150 558 524 5000 2000 10 7.315 73.15 Z558.6 8.5/7.5 10 150 150 558 524 6000 2000 12 7.418 89.014
Concrete reinforcement mesh is classified ribbed concrete reinforcement mesh and plain steel wire concrete reinforcement mesh. The wire of ribbed concrete reinforcement mesh is 3 faces indentation.Please see figuer Concrete reinforcement mesh is always used on residential slabs and footing-construction and BCA complying with AS 2870,which is always paced in all reinforced conrete members to stop the concrete cracking. And F62/F72/F82/F92/F1018 concrete reinforcement mesh is old specification,was replaced by SL62/SL72/SL82/SL92/RL1018.For example:previously called F62(now SL62) is wire diameter 6mm bars welded together in a 200mm square grid.the panel size is 2.4m X6m. The Tensile strength is 300Mpa. The concrete reinforcement mesh specification as below: Reinforcing Mesh Code wire diameter aperture edge open width length weight per sheet(kgs) F62 5mm 200*200mm 200mm 2.4m 6m 20.92 F72 6mm 200*200mm 200mm 2.4m 6m 30.12 F82 7mm 200*200mm 200mm 2.4m 6m 41 F92 8mm 200*200mm 200mm 2.4m 6m 53.55
Heyou factory can produce concrete reinforcing mesh which is the specification of New Zealand standard AS-NZS 4761-2001. Details of concrete reinforcing mesh: Material: 250N, 500N, 500L, 300E, 500E Mesh Pitch: 200mm Wire: ribbed steel wire & plain steel wire Overhang length of two sides: 100mm Wire diameter:6mm, 7mm, 8mm, 9mm Size: 2.4m * 6m or 2.2m * 5.8m Packing: 1ton more or less per bundle HS code: 73142000 Production Standard: AS-NZS 4671-2001 The specification of concrete reinforcing mesh as below concrete reinforcing mesh specification Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width No. x dia., mm Pitch, @mm No. x dia., mm Pitch, @mm Unit area, kg/sqm Sheet, kg Long' l bars, sqmm/m Cross bars, sqmm/m Structural and skatch SE92 13 X9.0 200 30 X9.0 200 5.0 75 318 318 SE82 13 X8.0 200 30 X8.0 200 3.9 59 251 251 SE72 13 X7.0 200 30 X7.0 200 3.0 45 192 192 SE62 13 X6.0 200 30 X6.0 200 2.2 33 141 141 Non-structural SL51.5 17 X5.3 150 40 X5.3 150 2.2 32 147 147 SL41.5 17 X4.0 150 40 X4.0 150 1.3 19 84 84 Are you a Manufacturer? Heyou wire mesh factory as a professional factory for reinforcement mesh, which has 10 workshops, more than 200 workers, advanced production line,perfect production process, Strict production regulations. We own ourselves laboratory for inspected chemical composition and mechnical property of raw material, drawn wire diameter measuring,cutting wire length measurement, and full pieces of concrete reinforcing mesh which contained pitch of wire to wire, shearing resistance, tensile strength, yeild strength, elongation, bend test, weight tolerance, size tolerance, ribbed height, pitch of transverse wire ribbed, surface quality and etc. We're strictly to do everything in order to guarantee our concrete reinforcing mesh quality. Therefore, Heyou Wire Mesh has a high reputation in our field as real manufacturer.
Construction reinforcement mesh was made by plain steel wire. It main used on building construction complied with standard AS NZS 4671-2001. The material is 250N, 500N, 500L, 300E, 500E, the mesh size is 150x150mm, wire diameter is 5.3mm and 4.0mm and the overhang length is in both sides. These specificate is very pouplar in New Zealand civil engineering field. More features of construction reinforcement mesh and ours as below: 1. high quality raw material 2. electric resistance welding machine made it which has firmly solder join, size precision,and appearance good-looking 3. Professional management team 4. Complete QC rules and regulations 5. A full of laboratory testing instruments Advantage of construction reinforcement mesh by AS-NZS 4671-2001 standard: 1. Save 30% of steel bar dosages 2. Reduce 50%-70% work time, improve construction progress and shorten construction period. 3. Cut down 5%-10% construction cost 4. Used widely,it has a good market development prospects. The specification of construction reinforcement mesh by AS-NZS 4671-2001 standard as below: concrete reinforcing mesh specification Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width No. x dia., mm Pitch, @mm No. x dia., mm Pitch, @mm Unit area, kg/sqm Sheet, kg Long' l bars, sqmm/m Cross bars, sqmm/m structural SE92 13 X9.0 200 30 X9.0 200 5.0 75 318 318 SE82 13 X8.0 200 30 X8.0 200 3.9 59 251 251 SE72 13 X7.0 200 30 X7.0 200 3.0 45 192 192 SE62 13 X6.0 200 30 X6.0 200 2.2 33 141 141 Non-structural SL51.5 17 X5.3 150 40 X5.3 150 2.2 32 147 147 SL41.5 17 X4.0 150 40 X4.0 150 1.3 19 84 84
Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm. the steel bar after drawing shape as below figure: 1. The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45. The angle scope is greater than 45 and is less than 70, the rib height is from 0.025d to 0.10d. 2. The reinforcing mesh panel includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost. Steel pallet for reinforcing mesh size 2.4m *6m Loading container for reinforcing mesh sheet: 2.4m *6m 3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars, twin bars or combination of single bars and twin bars. 4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels. Notes: 1. Grade 250N is supplied as plain round reinforcing steel complying with AS 3679. 1, exceptthe tolerance of the diameter and roundness dosen't apply it. 2. For 500L steel bars, only requriement for wire diameter is less than 5.0mm is RekL 500 Material certificate of reinforcing mesh as below: Common size of Squre reinforcing mesh panel for Austialian Market Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6 x2.4 m sheets Cross-sectional area/m width No. x dia., mm Pitch@mm No. x dia., mm Pitch@mm Unit area kg/sqm Sheet, kg Long'l bars sqmm/m Cross bars sqmm/m Squre, with edge side-lapping bars SL102 10 x 9.5 + 4 x 6.75 200100 30 x 9.5 200 5.6 80 354 354 SL92 10 X 8.6 + 4 X 6.0 200100 30 x 8.6 200 4.6 66 290 290 SL82 10 x 7.6 + 4 x 6.0 200100 30 x 7.6 200 3.6 52 227 227 SL72 10 x 6.75 + 4 x 5.0 200100 30 x 6.75 200 2.8 41 179 179 SL62 10 x 6.0 + 4 x 5.0 200100 30 x 6.0 200 2.2 33 141 141 Squre, without edge side - lapping bars SL81 25 X 7.6 100 60 x 7.6 100 7.1 105 454 454 How can we conctrol our products quality for exporting Autralia? Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechanical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3. Secondly, the panel size tolerances measure way as: a. Panel Size dimensions 6m in length, there is 40mm tolerances. b. Panel size dimensions 6m in length, the tolerance is �±0.7% c. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract. d. Weigh the each bundle weight to calculate each panel weight.
Steel Reinforcing Mesh Roll is used to provide tensile strength and crack control to structural concrete elements. Steel reinforcing mesh is the thin ribbed wire that can be make rolls presentation. Advantages to save more than 33% of steel, reducing costs 10% -30%; increase the speed of construction can shorten the duration of about 80%; to improve the quality of engineering structures, and concrete bonding anchoring reliable, smooth reinforcement bond strength equal to three times more, and the overall good, deviation is small, anti - cracking performance above 75%. Application Retaining and shear walls Beams and columns Concrete paving overlays Precast concrete elements Suspended floor slabs Swimming pool and gunite construction size(mm) 2.8-5.3 Reinforcement spacing(mm) Longitudinal wire 50-200mm Cross wire 30-1000mm Sheet size Length 2-50m Width 1-1.3m Mechanical and process property Meet GB/T1499.3-2002 standard;AS/NZS 4671; 2001,BS 4483:2005,A185-02
Concrete welded Reinforcing mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square grid pattern and is produced in flat sheets. The fabric is used to provide tensile strength and crack control to structural concrete elements. Advantages: Concrete Welded mesh reinforcingis a convenient and cost effective alternative to conventional bar reinforcement for the following reasons : The mesh is generally specified and manufactured according to standard references making for easy site identification, quality control and management. The mesh is manufactured in sheets or rolls resulting in a quick and simple site installation process. Although generally used in surface beds (concrete floor slabs on fill) and concrete roads, mesh can also be used in suspended floor slabs, concrete walls, culverts / drains and composite brick / concrete retaining walls. Square Reinforcing Mesh Standard Sheets - 6 m (length) x 2.4 m (width) = 14.4 m²: REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) EDGE WIRE(mm) MASS(kg) SL81 7.60@100 7.60@100 7.60@100 105 SL102 9.50@200 9.50@200 9.50@200 80 SL92 8.55@200 8.55@200 8.55@200 65 SL82 7.60@200 7.60@200 7.60@200 52 SL72 6.75@200 6.75@200 6.75@200 40 SL62 6.00@200 6.00@200 6.00@200 33 SL52 4.75@200 4.75@200 4.75@200 21 Rectangular Reinforcing Mesh Standard Sheet - 6 m (length) x 2.4 m (width) = 14.4m². REFERENCE MAIN WIRE(mm) CROSS WIRE(mm) MASS(kg) RL718 25*6.75@100 30*7.60@200 68 RL818 25*7.60@100 30*7.60@200 79 RL918 25*8.55@100 30*7.60@200 93 RL1018 25*9.50@100 30*7.60@200 109 RL1118 25*10.65@100 30*7.60@200 131 RL1218 25*11.90@100 30*7.60@200 157
Concrete Reinforcing Mesh Panel also called: Steel Bar Welded Wire Mesh /reinforcing welded mesh panel,cold ribbed steel bar mesh,welded wire mesh. Material: steel bar Weaving: the wires that run parallel to the width of the roll are placed on top of the wires running parallel to the length. Then, the wires are welded where they intersect. Wire diameter: welded steel bar panels ranges from 5mm to 16mm. Applications: Welded steel bar panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body. Features: Solid construction, Easy handling Packing: PVC Shrink, Moister-proof paper, Carton, pallet, Wooden Box , Special packing can be arranged upon request
Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm. 1. The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45°. The angle scope is greater than 45° and is less than 70°, the rib height is from 0.025d to 0.10d. 2. The reinforcing mesh panel includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost. 3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars, twin bars or combination of single bars and twin bars. 4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels. Common size of Squre reinforcing mesh panel for Austialian Market Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6 x2.4 m sheets Cross-sectional area/m width No. x dia., mm Pitch@mm No. x dia., mm Pitch@mm Unit area kg/sqm Sheet, kg Long'l bars sqmm/m Cross bars sqmm/m Squre, with edge side-lapping bars SL102 10 x 9.5 + 4 x 6.75 200100 30 x 9.5 200 5.6 80 354 354 SL92 10 X 8.6 + 4 X 6.0 200100 30 x 8.6 200 4.6 66 290 290 SL82 10 x 7.6 + 4 x 6.0 200100 30 x 7.6 200 3.6 52 227 227 SL72 10 x 6.75 + 4 x 5.0 200100 30 x 6.75 200 2.8 41 179 179 SL62 10 x 6.0 + 4 x 5.0 200100 30 x 6.0 200 2.2 33 141 141 Squre, without edge side - lapping bars SL81 25 X 7.6 100 60 x 7.6 100 7.1 105 454 454 How can we conctrol our products quality for exporting Autralia? Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechnical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3. Secondly, the panel size tolerances meassure way as: a. Panel Size dimensionsâ?¤6m in length, there is 40mm tolerances. b. Panel size dimensionsï¼?6m in length, the tolerance is ±0.7% c. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract. d. Weigh the each bundle weight to calculate each panel weight.
Welded Wire Reinforcement (WWR) provides the exact size of reinforcement where needed through variable bar size and spacing, thereby reducing steel waste. Plain Square Mesh sheets are a multi-purpose mesh and complies with AS/NZS 4671 : 2001 Steel reinforcing materials. Plain Square Mesh sheets are available in 6 x 2.4 m. Associated standards: AS/NZS 4671 : 2001 Steel reinforcing materials Application: Welded Wire Reinforcement can be used for: Slab on Grade reinforcement Floor and Walls Systems Topping Slabs Architectural precast wall panels Tilt-up construction wall systems Shear walls Retaining walls Mechanically Stabilized Earth (M.S.E.) reinforcement
reinforcing mesh SL82 1. Material: Low carbon steel ribbed wire 2. Standard: AS/NZS4671:2001 3. Main hole size: 200x200mm, edge 200x100mm 4. Wire diameter: main wire 7.6mm, 4 longitude edge wire 5.37mm 5. Sheet size: 2.4m x 6m 6. Application: bridge, road, building, sidewalk,etc. 7. Package: steel belt, pallet 8. Delivery: within 15 days for one container 9. Payment: T/T, 30% deposit, 70% by the copy of B/L
Reinforcing mesh SL82.
Brick wall reinforcement mesh is welded wire sheet for reinforced concrete construction. It is used in building surface, wall, ground, bridge, bank and airport. And its feature is that welding spots of warp wire and weft wire are on the same surface. Wire diameter: 2.5-6.0 mm Width: 5cm-27cm Length: 3mm. Spacing: 40cm Surface treatment: welded after hot dipped galvanized, welded after electro galvanized, welded before electro galvanized, welded before hot dipped galvanized, welded by stainless steel wire. We have two types of brick wall reinforcement mesh: truss-mesh reinforcement and ladder-mesh reinforcement. Package: carton/pallet/plastic wrapped. Package: carton/pallet/plastic wrapped.
