Pultrusion roving Package: each direct roving roll covering by shrinkage membrane or drawing membrane, then placed into cardboard box or set on pallet. Each pallet can stack 48 or 64 rolls .each roll weight is 15-18kg. It is can increasing roll weight according to customer requirements. Pallet stack shall no be higher than 2 layers, cardboard box shall no be higher than 5 layers.
E-glass winding/pultrusion roving 1. usage It is an e-glass roving produced by directly winding a certain number of individual fibers from the bushing without twist. It is coated with silicon alkyl binder, suitable for reinforcement epoxy resin, used for filament winding, pultrusion etc. FRP processing. Mainly products: small bore pipe core, storage tank, rods, be widely used in transportation, aviation and space, military and electrical products. 2. feature Good integrity and ribbonization; Complete and fast wet-out resins; Good moisture resistance and low fuzz. 3.technical parameter identification density(tex) Moisture content(%) Size content (%) Breakage strength (N/tex) Net weight�kg� EDR24-1200 1200 Less 0.10 0.55±0.15 �0.40 �13.0 EDR24-2400 2400 Less 0.10 0.55±0.15 �0.40 �13.0 EDR24-4800 4800 Less 0.10 0.55±0.15 �0.40 �13.0
CYC Fiberglass Direct Roving (ECY150D) for FRP Pultrusion CYC Fiberglass Roving for FRP Pultrusion is finished with high performance silane sizing and compatible with unsaturated polyester(UP), polyurethane, vinyl ester (VE), epoxy (EP) and phenolic resin matrixes. It is designed for weaving, filament winding, pultrusion, extrusion and hand lay-up processes. The typical end-finished products are including various FRP/GRP pipes, pressure vessels, gratings, chemical storage tanks, automobile parts, cable trays and so on. Glass Type: E-CR Glass Filament Diameter: 13, 15, 17, 24, 31�¼m Linear Density: 300, 600, 900, 1200, 2400, 4800, 9600tex Product Features: Good strand integrity and even tension Fast and complete wet-out in resins. Inner side unwinding smoothly & no fuzz Excellent tensile strength and mechanical properties TYPICAL PRODUCT SPECIFICATIONS Product Code Filament Diameter (m) Linear Density (tex) Tensile Strength (N/tex) Moisture Content (%) Loss On Ignition (%) Compatible Resin ECY150D-300 13 300 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-600 15 600 0.40 0.10 0.5 0.15 UP/VE/PF/EP ECY150D-900 17 900 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-1200 17 1200 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-2400 24 2400 0.40 0.10 0.55±0.15 UP/VE/PF/EP ECY150D-4800 24 4800 0.40 0.10 0.55±0.15 UP/VE/PF/EP
100% Cotton Roving Natural Shade Bale Packed with 6 side Cotton Knitted Fabric covered
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber
The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
Pultrusion grating
Pultrusion machine This machine is suitable for producing g.R.P. (glass reinforced plastic) sections in different shapes & sizes like angle sections, 'c' channels, hollow rectangular and circular-tube sections, solid rods etc. Specifications : Pulling capacity : 2000kgf to 10000 kgf. Pulling speed : 0.08 mtr/min. To 2.1 mtr/min. Die clamping bed : 1000 mm x 1100 mm Carriage size : 600 x600 to 1000x800 mm. Grippers : 2 or 3 nos / carriages. Carriage movement : by hydraulic power. Clamping force by pneumatic system Electrical power required : 2.0 to 7.5 kw for hydraulic power pack Heating requirement (depending up on size of mould) Compressed air required : approx- 10-12 cfm, & 5 -6 kg/sq.Cm pressure. Accessories : Glass roving (creel) stands, roving guides, perform guides, resin impregnation bath, resin pressure injection system, glass mat roll feeding station, automatic section cutter, section conveying roller table, glass mat slitter & pultrusion mold
Pultrusion mold Pultrusion die for continous molding of fibre - grp. Die is maintained at different heat zones using precesion pid controller.
Pultrusion profile is a kind of compound materials which is formed by taking fiberglass as the reinforced material, and taking thermosetting resin as base, the fiberglass continuous roving enable the product to have the extremely high longitudinal strength, the fiberglass mat (continuous strand mat, knitted mat and so on) makes the product have the good transverse strength. The thermosetting resin base is usually the unsaturated polyester resin, the vinyl resin, or the epoxy resin and the phenolic resin, the resin base enable the product to have the good anti-corrosion property, the different resin enables the product to be suitable for various corrosion environment, to add the ultraviolet inhibitor and fire retardant may enable the product to have the outstanding anti-aging property and the different rank anti-flammable property.
1) Drive mode: Hydraulic drive with 2 individual hydraulic pump 2) Max. pulling and clamping force: 10T 3) Motor power: 3KW2 4) Pulling speed: 0.1m 1m/min 5) Heating system: 6 heating zones with heating blocks (option: heating plate) 6) Heating temperature range: 0-300 with control precision ±1 7) Max. Clamping Space: 600mm 300mm 8) Clamping method: from up to down 9) Max hydraulic system pressure: 10Mpa, with cylinder diameter 110mm 10) Electric control: PLC station with English text display which enjoys the function of speed indication. 11) Linear guide with stainless steel dust cover. 12) Overall dimensions: 10m(length) 0.9m(width) 1.6m(height)
18455kgs of Fiberglass E GLASS DIRECT ROVING Ref: E6DR17-2400-386T for 9 289kgs + Ref: E6DR24-4800-386H for 9 166kgs TAKE ALL - 20 pallets (25m3) - 18 000 $ EXW FRANCE (59) Roving Direct is a single strand fiberglass filament yarn wound directly onto a spool without twisting. directly onto a spool without twisting. The term "E Glass" refers to the composition of the glass, which is a type of silica-based glass containing boron oxide boron oxide, aluminium oxide and other oxides. E Glass Direct Roving is mainly used as a reinforcement in polyester or epoxy resin composites to increase their mechanical strength stiffness and durability. It is also used in the manufacture of fibreglass products such as boats, storage tanks, swimming pools body panels and reinforcement parts for construction.
Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??
It is a slightly twisted sliver or roll of cotton created by spinning machines during the process of straightening fibers. Under the supervision of our experienced professionals, we are providing high quality range of Cotton Rovings. These rovings are processed from the fine quality cotton tree with the help of team of ingenious professionals.It is a slightly twisted sliver or roll of cotton created by spinning machines during the process of straightening fibers
02, 04, 06, 08 02, 04, 06, 08
Even thickness,good compaction of the fiber, no any other impurity and fluff good permeability with resin easy for deaeration,high productivity warp and weft rovings alignend in a parallel and flat manner resulting in uniform tension and very little twist. High strength of the product, light weight, corrosion resistant,long time using. Woven roving is in variety resin strengthen systems easy used for which is widely used in hands machanical process and paste the shaping crafts of glass fiber reinforced plastic.Such as shipping manufacture, vessles,planes and automotive parts, large panel, furniture, acrylic sanitary sports facilities and other fields. Roll Weight: 30-60kgs.Normal types are 36kgs.40kgs Each roll Woven Rovings is would onto a paper tube,The mat roll is wrapped up with plastic bag,and then packed in a cardbard box or wrapped up with kraft paper.The rolls can be vertically or horizontally placed.For transportation ,the rolls can be loaded into a container directly or on pallets.
Fiberglass roving.
Woven roving is made of roving drawn from big bushings. It is mainly used in hand and machine production. The typical products include boats, storage tanks, large sheets and panels, furniture, etc. Characteristics > even thickness, no fuzz, no stain > fast wet-out, products with high strength, little loss for strength in damp situation.
Winding roving Each direct roving roll covering by shrinkage membrane or drawing membrane, then placed into cardboard box or set on pallet. Each pallet can stack 48 or 64 rolls .Each roll weight is 15-18kg. It is can increasing roll weight according to customer requirements. Pallet stack shall no be higher than 2 layers, cardboard box shall no be higher than 5 layers.
