Short Description: The magneto-strictive level gauge is mainly used for continuous measurement of liquid level and liquid interface. Applications include: petroleum, chemical raw material storage, industrial processes, biochemistry, pharmaceuticals, food and beverage, tank management and gas station underground inventory, liquid level industrial metering and control, ship (dock), dam water level, reservoir water level monitoring and sewage treatment. The structural part of the magneto-strictive liquid level sensor is composed of a stainless steel tube (measuring probe), a magnetostrictive wire (waveguide wire), a movable float (with a permanent magnet inside), and a precision detecting circuit. When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide wire that will generate a pulsed electromagnetic field around the waveguide wire as it propagates along the waveguide wire. A float is arranged outside the sensor probe, and the float can move up and down along the probe as the liquid level changes. There is a set of permanent magnetic rings inside the float. When the pulsed current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position where the float is located,this pulse is transmitted back along the waveguide wire at a fixed speed and detected by the detection mechanism. By measuring the time difference between the pulse current and the torsional wave, the position of the float, that is, the position of the liquid surface, can be accurately determined Product features 1)Contact measurement 2)High precision, high stability, high reliability Long service life 4)Multiple signal output options 5)Reverse polarity protection 6)Lightning protection, anti-radio frequency interference 7)Compact structure and strong environmental adaptability 8)No need for periodic calibration and maintenance 9)Measure liquid level of tank with or without pressure 10)Isolated explosion-proof type (optional) 11)Easy installation Technical parameter: Output formï¼? 4ï½?20mAã??0ï½?5Vã??0ï½?10Vã??±5Vã??±10Vã??RS-485( varies from model to model) Linear errorï¼? superior to ±0.05%FSï¼?Sensors with a range of less than 300 mm has an error of less than 150 μm Repeaditityï¼? Superior to ±0.002%FS Output temperature driftï¼? 50ppm/ Product power consumptionï¼? â?¤50mA Output rippleï¼? â?¤20mV Load capacityï¼?4ï½?20mA outputï¼? Load capacityâ?¤500Ω ï¼? 0ï½?5Vï¼?0ï½?10V outputï¼?Controller loadâ?¥5KΩ Measuring probe materialï¼? 0Cr18Ni9Tiã??1Cr18Ni9Ti Electronic warehouse casing materialï¼?1Cr18Ni9Ti or aluminium die casting
Short Description: The magneto-strictive level gauge is mainly used for continuous measurement of liquid level and liquid interface. Applications include: petroleum, chemical raw material storage, industrial processes, biochemistry, pharmaceuticals, food and beverage, tank management and gas station underground inventory, liquid level industrial metering and control, ship (dock), dam water level, reservoir water level monitoring and sewage treatment. The structural part of the magneto-strictive liquid level sensor is composed of a stainless steel tube (measuring probe), a magnetostrictive wire (waveguide wire), a movable float (with a permanent magnet inside), and a precision detecting circuit. When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide wire that will generate a pulsed electromagnetic field around the waveguide wire as it propagates along the waveguide wire. A float is arranged outside the sensor probe, and the float can move up and down along the probe as the liquid level changes. There is a set of permanent magnetic rings inside the float. When the pulsed current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position where the float is located,this pulse is transmitted back along the waveguide wire at a fixed speed and detected by the detection mechanism. By measuring the time difference between the pulse current and the torsional wave, the position of the float, that is, the position of the liquid surface, can be accurately determined. Product features 1)Contact measurement 2)High precision, high stability, high reliability Long service life 4)Multiple signal output options 5)Reverse polarity protection 6)Lightning protection, anti-radio frequency interference 7)Compact structure and strong environmental adaptability 8)No need for periodic calibration and maintenance 9)Measure liquid level of tank with or without pressure 10)Isolated explosion-proof type (optional) 11)Easy installation Technical parameter: Output formï¼? 4ï½?20mAã??0ï½?5Vã??0ï½?10Vã??±5Vã??±10Vã??RS-485( varies from model to model) Linear errorï¼? superior to ±0.05%FSï¼?Sensors with a range of less than 300 mm has an error of less than 150 μm Repeaditityï¼? Superior to ±0.002%FS Output temperature driftï¼? 50ppm/ Product power consumptionï¼? â?¤50mA Output rippleï¼? â?¤20mV Load capacityï¼?4ï½?20mA outputï¼? Load capacityâ?¤500Ω ï¼? 0ï½?5Vï¼?0ï½?10V outputï¼?Controller loadâ?¥5KΩ Measuring probe materialï¼? 0Cr18Ni9Tiã??1Cr18Ni9Ti Electronic warehouse casing materialï¼?1Cr18Ni9Ti or aluminium die casting
The magneto-strictive level gauge is mainly used for continuous measurement of liquid level and liquid interface. Applications include: petroleum, chemical raw material storage, industrial processes, biochemistry, pharmaceuticals, food and beverage, tank management and gas station underground inventory, liquid level industrial metering and control, ship (dock), dam water level, reservoir water level monitoring and sewage treatment. When the sensor is operating, the circuit portion will excite a pulsed current on the waveguide wire that will generate a pulsed electromagnetic field around the waveguide wire as it propagates along the waveguide wire. A float is arranged outside the sensor probe, and the float can move up and down along the probe as the liquid level changes. There is a set of permanent magnetic rings inside the float. When the pulsed current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position where the float is located,this pulse is transmitted back along the waveguide wire at a fixed speed and detected by the detection mechanism. By measuring the time difference between the pulse current and the torsional wave, the position of the float, that is, the position of the liquid surface, can be accurately determined. Product features 1)Contact measurement 2)High precision, high stability, high reliability Long service life 4)Multiple signal output options 5)Reverse polarity protection 6)Lightning protection, anti-radio frequency interference 7)Compact structure and strong environmental adaptability 8)No need for periodic calibration and maintenance 9)Measure liquid level of tank with or without pressure 10)Isolated explosion-proof type (optional) 11)Easy installation Technical parameter: Output formï¼? 4ï½?20mAã??0ï½?5Vã??0ï½?10Vã??±5Vã??±10Vã??RS-485( varies from model to model) Linear errorï¼? superior to ±0.05%FSï¼?Sensors with a range of less than 300 mm has an error of less than 150 μm Repeaditityï¼? Superior to ±0.002%FS Output temperature driftï¼? 50ppm/ Product power consumptionï¼? â?¤50mA Output rippleï¼? â?¤20mV Load capacityï¼?4ï½?20mA outputï¼? Load capacityâ?¤500Ω ï¼? 0ï½?5Vï¼?0ï½?10V outputï¼?Controller loadâ?¥5KΩ Measuring probe materialï¼? 0Cr18Ni9Tiã??1Cr18Ni9Ti Electronic warehouse casing materialï¼?1Cr18Ni9Ti or aluminium die casting Lead wire wayï¼? a.Shielded cable connection, default length 2m (can be customized according to user requirements) b.Aviation plug connection c.Terminal block connection Explosion typeï¼? ExiaIIBT4ã??ExdIICT5(Depending on the model) IP gradeï¼?IP65 Installationï¼?thread mountingã??flange mountingã??Positioning ring installationã??Suspension installation or user-specific customization (depending on model)
Bronze Sleeve Packed Water Level Gauge Rating : Max. BOP 250 PSIG (17.24 Bar) at 435 F (225 C) Material : Bronze Description : Consisting of Steam Arm, Water Arm, Drain Cock, Left & Right Hand Type Ends : Screwed Specials : IBR Item Code : BM000057, BM000058 Size : 15mm Notes : Available Valve Size : 15mm to 20mm
Bronze Sleeve Packed Water Level Gauge Rating : Max. BOP 250 PSIG (17.24 Bar) at 435 F (225 C) Material : Bronze Description : Consisting of Steam Arm, Water Arm, Drain Cock, Left & Right Hand Type Ends : Flanged Specials : IBR Item Code : BM000055, BM000056 Size : 15mm Notes : Available Valve Size : 15mm to 20mm
Carbon Steel Sleeve Packed Water Level Gauge Rating : Max. BOP 350 PSIG (24.1 Bar) at 800 F (427 C) Material : Carbon Steel Description : Consisting of Steam Arm, Water Arm, Drain Cock, Left & Right Hand Type Ends : Flanged Specials : IBR Item Code : BM000053, BM000054 Size : 20mm
Ginger root Botanical name: Zingiber officinale Linn. Family: Zingiberaceae. Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant. Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice. Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position. Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed. Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils. The composition of dry ginger is given below: Dry Ginger rootMoisture:6.9 % Protein:8.6 % Fat:6.4 % Fiber:5.9 % Carbohydrates:66.5 % Ash:5.7 % Calcium:0.1 % Phosphorous:.15 % Iron:0.011 % Sodium:0.03 % Potassium:1.4 % Vitamin A:175 I.U./100 g Vitamin B1:0.05 mg/100 g Vitamin B2:0.13 mg/100 g Niacin:1.9 mg/100 g Vitamin C:12.0 mg/100 g Calorific value:380 calories/100 g. Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.
Guar Gum Types Food, Feed & Pharma Grades - Various particle sizes (very coarse to very fine). - • Various hydration rates (very slow to very fast). - • Various viscosities (1% solution in water = 50 cps to 7000 cps). - • Special deodourised grades. - • Special low microbiological count grades. Technical Grades Straight Guars: - Various particle sizes (very coarse to very fine). - Various hydration rates (very slow to very fast). - Various viscosities (1% solution in water = 50 cps to 8000 cps). - Special good Dry-Flow (Free-Flow) Guars. - Special Anti-Dusted Guars. Modified Guars and Guar Derivatives: - Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing), - Borated. - Reticulated. - Oxidised. - Depolymerised. - High water absorbance capacity. - Carboxymethyl (Anionic). - Hydroxypropyl (Nonionic). - Hydroxypropyltrimethyl chloride (Cationic). - Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative). - Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives. - Special Anti-Dusted Modified Guars / Guar Derivatives. Guar gum is a fiber from the seed of the guar plant. Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis). In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent. In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams. How does it work? Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines. There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite. USES: Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days. High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides. Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes. Constipation. Irritable bowel syndrome (IBS).
[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected  3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15  - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01
Product Name: Sodium permanganate Use level: Industrial Content: 40 (%) CAS Number: 10101-50-5 Molecular formula:NaMnO4 Molecular Weight: 141.93 Appearance: purple liquid. A density of 1.36 ~ 1.39 g / cm3, soluble in water, ethanol and ether, soluble in liquid ammonia. Decomposition in alkali. Strong oxidizing. And chemical properties similar to potassium permanganate. Purposes: as oxidants, disinfectants, fungicides and phosphorous antidotes. Toluene is also used to manufacture saccharin, o-toluene sulfonamide and organic synthesis and purification of phenol wastewater treatment. Can be used for circuit boards, metal surface cleaning, the conductive film cleaning to remove grease, electrolytic manganese dioxide, chemical fiber finishing, electroplating addition to hydrogen sulfide and other odors, as well as water treatment and so on. Packaging and storage: Industrial Pails barrel, net weight 25kg plastic drum, 250kg steel-plastic composite barrels, 1250kg IBC barrels packaging. Store in a cool dry place. Quality Standard: Â Items index Sodium permanganate (NaMnO4) Content / (%) 40 Water-insoluble content / (%) 0.01 Potassium (K) content / (%) 0.22 pH value 6 ?8 Density / (g/cm3) 1.36 1.39 Chloride (Cl) content / (%) 0.02
Rugged Construction Easy mounting with flanged connection Continuous level monitoring (with use of transmitter 4-20mA output) Direct visible level indication No process fluid in contact with the level indicator Suitable for Interface level application Safe for high temperature, high pressure applications Safe for corrosive, toxic, flammable liquids Available in different range of materials Assured level indication without power supply
Rugged Construction Easy mounting with flanged connection Continuous level monitoring (with use of transmitter 4-20mA output) Direct visible level indication No process fluid in contact with the level indicator Suitable for Interface level application Safe for high temperature, high pressure applications Safe for corrosive, toxic, flammable liquids Available in different range of materials Assured level indication without power supply
Product name: Molasses Beet HS Coe: 17039000 Origin: Egypt Packing: if in container it will be by flexitank OR if in Vessel it will be at tanks. Beet molasses is the syrupy by-product of the production process to extract sugar from sugar beets. The residual liquid that is left over is an excellent source of energy for livestock. It also offers a valuable feed resource to the cattle industry and a sugary substrate for the yeast and fermentation industry. Molasses is sold in bulk, delivered in heated tanker trucks (approximately 28 tons) USES Beet Molasses is an excellent source of energy and a good source of protein and essential minerals for both dairy and beef cattle. In growing and finishing diets, it can be added to dry rations or blended with other ingredients to produce a balanced liquid feed. For beef cattle, it can also be top-dressed to improve palatability of poor hay or silage. Molasses is also popular as an additive in salt licks and mineral supplements, assisting as both a sweetener and a binding ingredient. Molasses is a key ingredient in the production of yeast. Molasses is added to other substrates, heated and processed to create dry and liquid yeast for sale at both the wholesale and retail levels. Finally, in recent years, molasses has gained popularity as an alternative or a supplement to chloride salt for de-icing roads. Not only does it cost less than rock salt, it is also less corrosive and more environmentally friendly. STORAGE AND HANDLING Beet Molasses must be stored in a well-insulated, heated tank; at temperatures above 110 degrees it can easily be pumped with a 2.5 to 3 HP pump and 3 inch tubing. FOR MORE INFO AND ORDERS CONTACT US FOR NEXT TENDER (24/7)
Product Description Scientific name : Salvia Hispanica Ingredient : Chia Oil Description : Extra virgin chia oil is made using a careful cold pressing process, ensuring all the seed properties conservation. Nutritional Characteristics : Chia oil contains 62% Omega 3 and is an inexhaustible source of minerals and antioxidants. Sensory Characteristics Color :Light yellow Smell :Caracteristic Taste :Caracteristic Texture :Oily liquid Physicochemical Characteristics Characteristics : Range or Limit Acidity : 0.2 - 0.8 mg KOH/g Peroxide index :
Chia Seed Oil A great alternative to fish oil! 100% Vegan Plant source of omega 3-6-9 Supports healthy heart and brain functions No more fishy smell or taste Chia seed is the world's richest plant source of omega-3 fatty acids, much higher than other natural sources like flax seed oil or fish oil which often causes unpleasant aftertaste or fishy burps. Chia seed is also rich in antioxidants, high in protein and contains 8 essential amino acids. Other than rich in omega-3 fatty acids, chia seed also provides omega-6 linoleic acids (LA) and omega-9 oleic acids. These three types of unsaturated fats play a critical role in multiple bodily functions. A balanced proportions of omega fatty acids are required by the body for optimal health. Chia seed oil packs more omega-3 into each dose than seeds alone Product Description Scientific name : Salvia Hispanica Ingredient : Chia Description : Extra virgin chia oil is made using a careful cold pressing process, ensuring all the seed properties conservation. Nutritional : Chia oil contains 62% Omega 3 and is an inexhaustible source of minerals and antioxidants Sensory characteristics Color: Light yellow Smell: Caracteristic Taste : Caracteristic Texture : Oily liquid Physicochemical characteristics Characteristics : Range or Limit Acidity : 0.2 - 0.8 mg KOH/g Peroxide index :
Morin Topping is a topping jam with textured liquid and high fruit content, nature's real goodness, ready to liven up your daily snacks. Made from selected cocoa powder, make your cake creations, desserts even pastry to the next level! Variants: - Strawberry - Chocolate - Caramel - Blueberry
REFLEX GLASS LIQUID LEVEL INDICATOR Enquiry Now Liquid level indicators are equipped with boron silicate glass, hardened by an accurately controlled heat treatment process. These level indicators are used to display the level of ammonia gas in the system. The liquid level indicators are installed with stop valves equipped with handwheels The liquid chamber is a one piece metal body covered by glass. The light striking the glass in the liquid portion is absorbed by the liquid whereas the light striking the glass in the vapour portion is reflected, making the liquid appear black. Sizes: 12", 18", 24", 30" 36", 42" 48", 54", 60". Gives safe and positive visual indication of liquid level in vessel under high pressure and temperature conditions. Suitable for R717 (Ammonia), HCFC & HFC. In case of glass break, the balls inside the valve stop the refrigeration flow immediately. Tempered boron silicate glass resistant to chemical, thermal and mechanical shocks. Safe working pressure: 400 psig (27 bar). Large chambers for boiling, flashing and surging liquids.
Liquid Cylinder Level Gauge Microcyl / INox - 250 Liters level Gauges Full SS body Make, 2/2.5" Dial
VRV Level Guage Or 300 Litres Lqiuid Cylinder level Gauge. with Full body SS make, including Calibration Road with SS make.
Sodium silicate, often referred to as liquid glass, is a versatile inorganic chemical compound with a wide range of industrial applications. It is a colorless, viscous liquid that solidifies when exposed to air or heat. Sodium silicate is used as a binding agent in industries such as construction, where it binds together particles in cement and refractory materials, and in the automotive sector for manufacturing brake linings and foundry molds. It also finds use in detergents and soaps as a corrosion inhibitor and emulsifying agent, and in water treatment processes to control pH levels and precipitate impurities. The varied properties and applications of sodium silicate make it a valuable component in several industries.
