1. Big contact surface 2. High overload capacity 3. High strength material, stainless steel bolt fastening 4. Easy to install and remove 5. Energy saving 6. Suitable wire: 35-70sqmm 7. Suitable wire diameter: 7-10mm
Door hardware, hinges, die casting products, zamak die casting, aluminum die casting, door handles, ironmongery, clamps, pipes, knobs, broom clamps, brackets, locks, pad bolts, auto parts, lugs.
Specializes in manufacturing high quality fasteners such as screws, nuts, bolts, foundation bolts, washers, allen keys, hose clamps, pins, and threaded rods. we utilize materials including stainless steel (201, 204, 301, 304), mild steel, brass, and aluminum.
Design Requirements for Suspension Clamps It ensures that there is proper coordination between the physical and mechanical aspects of the suspension clamp. In addition, the design requirements ensure that all components are in the correct position. This will contribute to the smooth operation of the suspension. -Anchor Clamps First of all, you should be able to move the anchor clip next to the conductor freely. To accomplish this, make sure that the trunnion of the clamp is part of the body. -Conductor Support Slot When purchasing a suspension clamp, make sure that the conductor support slots are the correct size. Check the measurements according to the suspension clamp manufacturer's instructions. The body and keeper should be free from sharp edges or irregularities of any kind. - Design of Shoulder Straps When purchasing overhead suspension clips, check the design of the straps. Make sure that they are round and that their dimensions directly match those of the trunnions. -Design of bolts and nuts Although they may look small, they have strict design requirements. When purchasing suspension clamps or overhead cable clamps, check the position of the bolts and nuts. Make sure they are securely fastened to the clamp. They should be securely attached to prevent them from falling out during fixture operation. Design them to ensure that the robot can protrude through the threads to the outside. In addition to providing outstanding products and services, we are also passionate about educating customers on the proper application of Conductor Suspension Clamp,ADSS Cable Suspension Clamp,Overhead Line Suspension Clamp.Welcome to visit our company and factory. If you need any further assistance, please do not hesitate to contact us. The product will supply to all over the world, such as Kenya ,Palau ,Uzbekistan ,Iraq ,India . There are more than 100 jobs in our factory, and we also have a working team of 15 people to provide pre-sale and after-sale services to our customers. Welcome customers all over the world to contact us or visit our company. Thanks for the regular and new customers support. We look forward to serving you.
All Aluminum Conductors(AAC)-(IS-398 PART-1) Aluminum Conductors Steel Reinforced (ACSR)-(IS-398 PART-2) All Aluminum Alloy Conductors(AAAC)-(IS-398 PART-4)
Application :- The XLPE (Cross Link Poly Ethylene) Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with XLPE compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The outer sheaths can be PVC, HR PVC, FRLS or FR depending upon the application and requirement. Technical Advantage of XLPE Insulation :- Higher current rating, higher short circuit rating (approx 1.2 times that of PVC), thermosetting in nature, higher insulation resistance (1000 times more than PVC cables), higher moisture resistance, better resistance to surge currents, low dielectric losses, better resistance to chemicals and corrosion, longer service life. Comparatively higher cable operating temperature 90�°C and short circuit temperature 250�°C. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +90�°C Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:7098 (Part-1) Packing : 500 / 1000 meters on drums
Application :- The Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with PVC compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The inner & outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C or +85�°C in HR PVC Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 & 4 core. Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:1554 (Part-1) Packing : 500 / 1000 meters on drums
Aluminum PG clamp/ Paralle Groove Clamp/ELectrical Wire Clamp Description Aluminum PG clamp/ Paralle Groove Clamp/ELectrical Wire Clamp designed to connect two parallel bare conductors. Conductors can be aluminum alloy or aluminum steel reinforced. Material Connector bodies made of corrosion resistant, high strength aluminum alloy 99.5 Bolts: DIN 933, steel 8.8, dacromet; Nut: DIN934, dacromet, pressed into lower part Pressure pad: aluminum alloy; Spring washer: DIN127, steel Conical washer/Spring washers: Steel, DIN6796 corrosion-protected, dacromet Stainless steel A2 bolts and nuts available according to order. Features Pressure pad ensuring uniform pressure along the clamp Cross-grooved clamp channels of universal clamp type improve mechanical pullout strength and electrical contact.
Model Number:JH-064 Product name: steel parallel groove clamp Brand Name:Jinhan Type:all Application:broad Material: steel produce according to customers'drawing and requirement samples available package cartons & pallets according to customers' requirement Model Number:JH-076 Product name: aluminum parallel groove clamp Brand Name:Jinhan standard:GB type:JB-0~JB-4 frequency:low screw tolerence:4h material:aluminum product grade:A Application:power line fittings produce according to customers'drawing and requirement samples available
ACSR have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.
ACSR Aluminum Conductor Steel Reinforced is used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding for desired strength to be achieved without sacrificing ampacity. Aluminum alloy 1350-H119 wires, concentrically stranded around a steel core available with Class A, B or C galvanizing; aluminum coated (AZ); or aluminum-clad steel core (AL). Additional corrosion protection is available through the application of grease to the core or infusion of the complete cable with grease. Also available with Non Specular surface finish.
All Aluminum Alloy Conductor is used for primary and secondary overhead transmission and distribution services. This has been designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio and better sag characteristic. The conductor has a higher resistance to corrosion than ACSR. Stranded 6201-T81 high strength aluminum conductors, conforming to ASTM specifications B399 are concentric lay-stranded, similar in construction and appearance to 1350 aluminum alloy grade aluminum conductors, and has a greater resistance to abrasion than conductors of 1350 aluminum alloy
Place of Origin: Hebei, China, Meterial:Aluminum standard:CCC MOQ&payment:Negotiable Port:Tianjin package cartons & pallets according to customers\' requirement. Lead time: about one week
Construction This bare concentric-lay stranded conductor is constructed with a straight round central aluminum wire surrounded with one or more layers of helically-laid aluminum wires. These conductors are also manufactured as compact conductors if required. 6201 is also available. Standard ASTM B230, B231,IEC, or other standards required by customers. Applications Sino-cables type AAC is suitable for 1.Class AA as bare conductors usually used in overhead lines. 2.Class A as conductors to be covered with weather resistant materials and for conductors where greater flexibility is required. z Package in coil, steel and wooden reel, steel reel, wooden reel.
1.Applications AAAC have been widely used in power transmission lines with various voltage levels,and also used in power lines across great rivers,heavy ice area,and other places special geographical characteristics.The cables have excellent advantages of high strength,large current carrying capacity and good catenary property as well as wear-resistance,anti-crush and corrosion-proof with simple structure,convenient installation and maintenance,low cost for the line,large transmission capacity. 2.Specifications AAAC bear conductor meets or exceeds the following ASTM Specifications: B-398 Aluminum Alloy 6201-T81 Wire for Electrical Purpose. B-399 Concentrical-Lay-Stranded 6201-T81 Aluminum Alloy Conductors 3.Product Performance (1).The electrical performance of AAAC is indicated in DC�©/km(20oC).The resistivity of aluminum alloy wire for stranded wires is: LHA1:not greater than 32.840n�©. m LHA2:not greater than 32.530n�©. m (2).The rated tensile strength of AAAC is denoted with the result of total cross-section areas of all aluminum alloy conductors multiplied by min.Tensile strength of corresponding size specified in the standard for aluminum alloy wire. 4.Material Standard The high-strength aluminum alloy conductor used for AAAC conforms to the standard JB/T 8134-1997(equivalent to IEC 60104:1987). Construction of All Aluminum Alloy Conductor
Application This clamp is for the termination of 2 or 4 cores with hook fixing. Its function is to fix and tighten the insulation conductors. Usage These clamps are designed for anchoring self-supporting LV-ABC lines from 2 to 4 cores. And they also have strong strength which keep the clamp in an open position during the installation of conductors 1) Tool free installation. 2) Made of high mechanical aluminum alloy and anti-UV material. 3) Used for the low voltage LV ABC lines. 4) Available cable size ranges from 3 to 6 mm. 5) All parts are resistant to any environmental effects. 6) Guarantee no cable insulation damages or slipping. 7) Can be delivered with 2 or 4 conductors. Our service 1, Fast Response Time 2, Quality and Certified Products3, Resonable Price 4, Cheap and Reliable Transportation 5, 7*24 Hours After Sales Service
We are engaged in manufacturing and supplying Aluminium Conductor Steel Reinforced using advanced technology. The Aluminium Conductor Steel Reinforced of "Bharat Cab" are highly demanded due to the advance make as these are designed by utilizing high tensile steel to achieve a high strength-to-weight ratio. Details : - This conductor has solid or stranded high carbon, high tensile steel core in centre surrounded by strands of aluminium (E.C. GRADE) wires. - ACSR CONDUCTOR is available in a wide range of steel having carbon upto 60%. - The proportions of aluminium and steel can be varied to obtain the relation between current-carrying capacity and mechanical strength best suited to each application, generally, Aluminium content is 68% and steel content is 32%. - ACSR conductor is used as bare overhead conductor for primary and secondary distribution. Applications : - Generation stations to power houses. - City to city. - River crossings. Advantages : - High tensile strength. - Lightweight with longer spans. - Requires lesser supports. - Higher corona limit.
Construction Aluminum 1350-H19 wires, concentrically stranded about a steel core. Standard core wire for ACSR is class A galvanized. Standard ASTM B230, B232, B498, B500, IEC, or other standards required by customers. Applications Sino-cables type ACSR is used as bare overhead transmission conductor and as primary and secondary distribution conductor and messenger support. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity. Package in coil, steel and wooden reel, steel reel, wooden reel.
1.Applications To supply power from the utility s lines to the consumer s weatherhead.For service at 600 volts or less(phase to phase) at a conductor temperature of 75oC maximum for polyethylene insulation or 90 oC maximum for crosslinked insulation. 2.Construction Concentric strand or compressed 1350-H19 conductor,polyethylene or crosslinked polyethylene insulation,concentric strand AAC,ACSR or 6201 alloy neutral messenger. 3.Standards ASTM B-230,B-231,B-232 and B-339 ICEA S-76-474
Application : AAAC All Aluminum Alloy Conductor is used for primary and secondary overhead transmission and distribution services. This has been designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio and better sag characteristic. The conductor has a higher resistance to corrosion than ACSR. Standards : ASTM B399, AS1531, IEC 61089, DIN 48201, BS 3242; NFC34215, SS4240814 Construction : Stranded 6201-T81 high strength aluminum conductors, conforming to ASTM specifications B399 are concentriclay-stranded, similar in construction and appearance to 1350 aluminum alloy grade aluminum conductors, and has a greater resistance to abrasion than conductors of 1350 aluminum alloy