Epoxy Floor Coating (interior Floor Coat) Covered/underground Car Park/garage Warehouse Coatings Factory/food Plant Coating Industrial Floor Coating Self Levelling Floor Coat Hygienic Coating (anti-bacterial)
Supplying business of construction chemicals like Anchor grout, Epoxy floor coating
We are Epoxy flooring manufacturers and Epoxy flooring contractors in India. Are you looking for Epoxy Flooring Services for your industrial Place in India? Then your search ends here. Tri Polarcon Pvt Ltd, which is a Leading epoxy flooring manufacturer in India and offers a wide range on epoxy flooring services complying with international standards. We supply all kinds of floor services such as epoxy flooring service, industrial epoxy flooring service, epoxy coating service, industrial and commercial applications are doing.
A two component, general purpose polyamide-based epoxy floor coating giving excellent adhesion to concrete surface. Fully cured paint films are resistant to mild solvents, chemical spillage, abrasion, impact, and water.
High-Quality Waterborne Epoxy Floor Coating Product Description: CM-101 Waterborne epoxy is a two-component curing coating at room temperature. Component A is a waterborne epoxy curing agent, and component B is epoxy resin. Product Functions: ï?? Enclose the ground to improve adhesion and prevent dust emission. Application Areas: ï?? Floor painting in the workshop ï?? Factories ï?? Supermarket Advantages of the Product: ï?? Greater durability and performance. ï?? More tolerant of petroleum contaminates in a concrete surface, making it ideal for garages and parking structures. ï?? Glossier finish. Technical Parameters: State in container No hard lumps after mixing. Density, g/ml 1.05 Surface Drying Time,â?¤ 60 mins Complete Drying Time,â?¤ 7.5 hrs Adhesion,â?¤ Level 0 Proportion (Weight) Component A: Component B=3:1 Construction Reference: ï?? Roller Coating is Recommended. ï?? Before construction, component A and component B should be mixed according to 15:5 (weight ratio). After fully mixing, the construction should be carried out. ï?? The construction shall be carried out in the surface temperature above 10â?? ï?? With the use of a coating, the mixed coating should be used up within 30 minutes. ï?? The second coating should be carried out after the lower layer is completely dried. The recommended interval is 12 hrs.
Epoxy finish is a two pack solvent based paint suitable for kitchens, workshops, factories, and chemical plant floor. PROPERTIES Colour : Available in pastel and dark shades Finish : High gloss/Egg Shell Theoretical Coverage 7-8 m2/ lit Curing time: 15 â??20 hours at 25�° C Full cure: 7 days Flash point 22�°C (ISO 367 â??83) Specific gravity: 1.35+.05 when mixed A+B Pot life: 8 hours at 25�° C Mixing ratio: 4 parts baseâ??Aâ?? : 1 part hardner â??Bâ?? Solvent: Epoxy thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
It is mainly used for floor intermediate coating and sealing of indoor places with high environmental protection requirements. Each group is divided into two components at the proportion of 20:4, weighing 24kg. It is mainly used for floor intermediate coating and sealing of indoor places with high environmental protection requirements, featuring environmental protection, low VOC content, thinning after adding water, large area application, strong filling performance and easy construction.
A two pack epoxy primer for concrete floor. The product penetrates deep into the surface over which it is applied & seals the voids eliminating entrapped air or moisture. It also acts as an adhesion promoter for subsequent coats of floor coating system hence referred as bonding primer.
Product Name Epoxy Self-leveling Floor Paint Component Epoxy Self-leveling Floor Paint is a two-component Features 1. Surface flat and mirror effect2. Scrubbing resistance, Pressure resistance, Abrasion resistance3. Anti-acid, anti-alkali, anti-salt, and anti oil corrosion 4. Thickness 1-3 mm DiscriptionEpoxy Self-leveling Floor Paint is a two-component, self-leveling, and seamless floor coating system that can form thick film at a time which can last long with smooth surface.
Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.
Houston based man caves of texas can transform your garage into a living space you will be proud to hang out in with your buddies. Specializing in epoxy garage floor coatings, flooring tiles, and garage storage solutions. Garage builder | professional epoxy coating company | man cave designer | garage flooring contractor | garage storage company | business | xyz
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Epoxy floor coatings are typically comprised of two main components, resins and hardeners. When these two component are mixed together during the epoxy floor coating application process, a chemical reaction begins. This chemical reaction turns the epoxy floor coatings into tough, rigid, and plastic-like materials, which are very durable, waterproof, and chemically resistant. Coz available in a variety of colors and styles, many commercial or industrial or industrial facility are use this coating to create a durable and attractive flooring surface, to make the original floor more functional. Topu epoxy floor system are generally consists of three parts, primer, second and top coat. Through grinding or mending the origin concrete floor, smooth uneven surfaces and remove dirt, oil, and other debris from concrete floors. We use the primer to repair the ground, smooth and improve the adhesion ability; then use second coat to increase solid degree of the whole system, and the topcoat give out the appearance of optional color, and covering the entire system to create a durable and attractive flooring surface.
We supply anti slip redeed Decking and Flooring ### made from Red Meranti ( FOB usd 690/cbm) or Acacia ( FOB usd 490/cbm ) and Bangkirai (FOB usd 890/cbm) ## Also available all kind of Tropical wood species : Mahogany - Rubberwood - Durian - Mix Hardwood/Redwood ### Products in S4S or E2E ### Payment By 30% Deposit Bank TT in advance and 70% Balance against copy of B/L after shipment
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Solvent free, low odour, trowel applied, anti-slip, thermal shock resistant, heavy duty polyurethane flooring. Compressive strength: > 55N/mm2, Tensile strength: >18 N/mm2, Adhesion strength: >2.5 N/mm2. Part A - 3.0 kg, Part B - 3.0 kg. Filler C - 12.0 kg, Aggregate - 10.0 kg
Solvent Free, low odour, trowel applied , self-smoothing polyurethane resin. Compressive strength: >55 N/mm2, Tensile strength: >18 N/mm2, Adhesion strength: >2.5 N/mm2. Part A - 3.0kg, Part B - 3.0 kg, Filler C - 14.0 kg
Chemical resistant vinyl ester based lining for floors, chemical tanks, petrolchemical plants, chemical processing plants etc. Vinyl Ester resin - 200 litre per drum, curing agent - 5 kg, accelerator - 5 kg, pigment - 5 kg
Epoxy floor coating.
Epoxy coating, polyurethane floor coatings, waterproofing products, decontamination chemical cleaning products.Epoxy and Polyurethane floor coatings, waterproofing works, concrete repair works
