We are one of the leading trader and supplier of world class range of Resin Cast Current Transformers that are procured from our certified vendors of the market. These transformers are fabricated using the finest grade raw material and sophisticated technology at vendors’ end. Our offered products are widely demanded among clients due to their quality attributes like high performance, user friendly interface, longer service life and compact design. Our offered transformers are carefully examined on various parameters by our vendors to ensure their flawlessness.
Specifications:
Resin cast current transformers up to 33KV class
For current tansformer: ratio: 5a/5a to 5000a/5a & 5a/1a to 5000a/1a, va/cl ; 0 va to 50va cl from 0.2, 0.2s, 0.5, 0.5s, 1.0, 3.0 5.0
Str: upto 40ka/3, upto 33 kv
For potential transformer: 1phase & 3 phase draw out type upto 33 kv, class from 0.2 to 1.0
Voltage factor : 1.2 continous , 1.5 for 30sec.&
1.9 for 8 hrs
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Transformers,Distribution and Power Transformer,Varivolt
Safety Transformers
Diesel Generators
Industrial Panels
Stabilizers
Energy Saver
Industrial Panels
Resin cast current transformers are available for metering and protection application. These current transformers are mainly fabricated according to client’s specification. Ct coils are encapsulated in cast resin (polyester / epoxy). Secondary terminals are provided with either screws or studs. The main insulation between primary and secondary and earth is obtained by this epoxy resin. These transformers are of compact design with high mechanical and electrical properties. These are non-hygroscopic and hence give very good insulation properties even in given humid conditions.
General particulars
Rated voltage: 11 kv
Rated primary current: 100 a
Rated secondary current: 1a or 5a
Rate burden: 5va
Rated frequency: 50hz
Accuracy class: 0.5 or 0.5s
Temperature: as per is-2705/1992
Highest system voltage: 12kv
Insulation level: 28kvrms/75kv(p)
Stc: 13.1ka for 1 sec
Continues thermal current: 1.2 times of rated current
Core material: crgo
Copper wire material: enameled wire as per is-4800 part-4 or iec-317
Insulation class/material: epoxy resin
Secondary terminal: m5 brass bolt with nut &washer or m5 threaded bush with screw &washer
Primary terminal p1 & p2 size and material
Mounting base: ms 5mm thick zinc plated
Rountine test :as per is-2705/1992
We are producing only Aluminum Gravity Die Casting for 30 year in Korea
We have a lot of experience about Gravity die Casting
Please make anytime with drawing
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Gremlog Trading DMCC stands at the forefront of the metal recycling industry, offering a meticulously curated selection of carefully sourced and recycled metal scrap solutions. Our comprehensive range includes:
Cast Iron Scrap: Our cast iron scrap, derived from the recycling process, is subjected to thorough quality checks, ensuring its suitability for applications requiring robust and high-performance cast iron.
Aluminium Scrap: Crafted from precise recycling processes, our aluminium scrap adheres to stringent purity standards, ensuring optimal performance in the production of high-quality aluminum alloys.
Steel Scrap: Derived from the efficient recycling process our steel scrap undergoes rigorous processing to meet exacting specifications, guaranteeing consistency and reliability for diverse industrial applications.
Rebars: Our meticulously sorted and processed rebars are characterized by its uniformity and purity, ideal for applications demanding precise metallurgical properties.
Fine Iron Scrap: Engineered for excellence, our fine FE scrap undergoes advanced processing, delivering a product that meets the stringent demands of modern manufacturing processes.
Our cast iron scrap, derived from the recycling process, is subjected to thorough quality checks, ensuring its suitability for applications requiring robust and high-performance cast iron.
PMMA-ACRYLIC MIX COLORS, aprox. 95% STRIPS (LABELS CUT-OFF) EXTRUSION GRADE and aprox. 5% Cuttings White Color From The Production Of Tubs (clean, Without Glass Fiber) Cast Grade.
Post industrial. Materials are bulk.
Can load bulk in 1x40' Open Top container approx. 20-24 MT.
Ready for shipment. Photos are available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
56837 Epoxy Cast Current Transformers Suppliers
Short on time? Let Epoxy Cast Current Transformers sellers contact you.
