We are direct seller mandate providing EN590 10PPM diesel fuel. ORIGIN: Kazakhstan (non-sanctioned) CONTRACT: One year - no trial shipment QUANTITY: 50,000 - 200,000 MT per month DELIVERY TERMS: CIF PAYMENT TERMS: DLC PRICE AND PAYMENT TERMS: US $470/MT (Transferrable DLC) US $490/MT (Non-transferrable DLC) Send me an inquiry for our SCO. Thank you
En 590 Gas Oil Is A Gas Oil With A Sulfur Concentration Of 10 Ppm. It Has A Higher Cetane Number Than A2 Class Gas Oil (another 10ppm Sulphur Content Class Of Red Diesel), Making It More Suited To Internal Combustion Engines In Off-road Cars. The Seller Will Issue The Necessary Documents As Agreed In The Delivery Procedure. Contact Us In Order To Issue The Soft Offer To Your Company For Proceeding. Seller Working Procedures, Terms, And Condition. Fob Price: Us$610.00 -- $620 Per Metric Tons (negotiable) Origin: Kazakhstan Key Specifications/Special Features: TEST UNITS METHOD RESULT Density at 15 C Kg/m2 EN ISO 12185 845.0 API gravity Kg/L ASTM D 1250 34 Ash content %m/m EN ISO 6245 0.01 Flash point C EN ISO 2719 Above 55 Sulphur content Mg/Kg EN ISO 20884 10
EN590 10pp Issues LOI Trial 50,000MT - 100,000MT Period Trial + Annual Contract 1: Buyer to issue official irrevocable corporate Purchase Order (ICPO) with full banking information and company profile. 2: Seller issues commercial invoice to buyer, buyer countersigns within 24 hrs & returns to seller. 3:Seller issues the following PPOP document to buyer. A: Authorization to Verify (ATV) via email/telephone. B: Passport product analysis. C: Notice of Readiness to inject (NOR). D: Certificate of Origin. E. Tank Storage Receipt (TSR). 4:Within 24 Hours of receiving PPOP document's, buyer pays extension cost directly to sellers tank farm company. 5: Seller issue DTA (authorization to dip test),Access Permit and Buyer Conducts Dip-Test/SGS at sellers Tanks. 6: Buyer provides Seller ? Refinery with Buyers Vessel/Tank information. 7:Seller commences injection immediately into buyers vessel /tank within maximum 48 hour's Buyer pays via MT103/TT and issues all export document's. 8 Both parties sign a one - year contract. We also can supply from vessel to vessel or vessel to your port of destination We have direct links to refineries on a global level
EN590 10ppm SPOT FOB Rotterdam price $515 per mt FOB Rotterdam price $630 per mt FOB DOHA: $498 per mt CIF ANY PORT: $533 per mt
Specification International export Standard Trial Shipment 50,000 MT (+/- 5%) Monthly Quantity 100,000MT Total Quantity 1,250,000 MT Price $482 USD PER MT Payment MT103 Packing By Bulk Inspection SGS or Similar By Seller Delivery FOB Loading port Rotterdam & Houston port. Insurance 110% by Seller Performance Bond 2% PB in favor of Buyer F.O.B. FEE ON-BOARD FUJAIRAH, ROTTERDAM & HOUSTON PORT 1. The Buyer issues an official ICPO containing the Seller's procedure upon for seller verification alongside: (a) Company Profile, (b) Seller's procedure, (c) Full banking detail, (d) Buyer acceptance letter, (e) Company Registration Certificate, (f) International data passport Copy of Buyer's, (g) NCNDA/IMFPA (h) TSA (Tank Storage Agreement) as proof of Storage Tank Availability. 2. The Buyer issues an official ICPO containing the Seller's procedure with TSA and Company Certificate of Incorporation. 3. The Refinery verifies the Buyer's ICPO with Company profile and issues Commercial Invoice of the product in tanks at the Port, and also SGS application form to the Buyer and the Buyer�¢??s Tank Farm Company sign and return CI to the Seller with NCNDA/IMFPA signed by all buyer groups with commission structures and buyer Terminal Access code and Hub Number. 4. Seller issues the below PPOP documents to the Buyer's secured email for verification. SGS Report GPS Coordinate TSR (Tank Storage Receipt) IR (Injection Report) DTA (Dip Test Authorization Letter) ATSC (Authorization to Sell and Collect) ATV (Authorization to verify the product in the Seller's Tank) 5. Upon buyers receipt of the PPOP, Buyer inspects SGS agent or equivalent. 6.Seller issues the following final documents to all Intermediaries and the Buyer endorsed NCNDA/IMFPA. 7. Upon successful Dip Test in tanks, product will immediately be injected into Buyer�¢??s Tanks. The Buyer makes Payment for the product via MT103 in exchange for title. DIESEL FUEL SPECIFICATION EN590 (10PPM) USLD Detailed specs shall be provided upon request. NOTE: THE ICPO must be in buyer's letterhead with authorized signatory and stamp. It is mandatory that the document carries the buyer�¢??s bank and bank officer's contact information. The names and positions of the Company representative signing the ICPO must be clearly indicated. Otherwise, the document has no legal value; the documents must be fresh (recent date �¢?? the most 1-3 days old max.) The letterhead of the Company requesting the commodity must correspond to the Bank Account Holder on the banking information provided. Lastly, the ICPO must be addressed to the VIA Al Thani and must carry the seller's approved procedures as shown above. If your documents do not pass these verification points, please discuss them with your Buyers and get them corrected. This will save time in our process
Low sulfur diesel fuel EN590 10ppm (Euro-5) Lot of 100,000MT per month and contract for 12 months CIF to your destination at a competitive price Country of origin: Qatar
Origin: Kazakhstan, Georgia, Malaysia Incoterms: CIF/FOB Loading Port: Rotterdam and Houston etc Payment Terms: MT103 TTWIRE Performance Bond: 2% PB Contract Term: SPOT 6-12 Month Minimum (With Rolls and Extension Inspection: SGS CIQ or Similar DIESEL FUEL EN590 Minimum Quantity: 50,000 MT per month Price CIF/ASWP: Gross USD $505.00 MT / USD $495.00 MT NET FOB Price: Gross USD $415.00 MT / USD $405.00 MT NET TRANSACTION WORKING PROCEDURE FOB Rotterdam/Houston 1. Buyer sends Company Profile along with ICPO, Tank Storage Agreement (TSA) and data page of buyers passport 2. Seller Issues commercial invoice (CI), Buer signs and returns commercial invoice back to seller. 3. Seller verify buyer TSA by Letter and Seller issues the following POP documents to buyer: a)Statement of Product Availability b)Commitment Letter of Supply c)Unconditional Dip Test Authorization (UDTA) d)Authorization to Sell and Collect (ATSC) e)Authorization to verify the product in Seller''s tank (ATV) f) Fresh SGS not older than 72 hours 4. NCNDA/IMFPA will be signed among all parties involved. 5. Buyer options conduct DIP TEST on the product and make the payment for the total value of product injected into the tanks through the means of mT103-TT 6. Seller pays commission to all intermediaries involved in the transaction and subsequently monthly shipment continues as per terms and conditions of the commercial invoices and extension of transaction by issuing 12 months contract to buyer for proceeding. STAND TRANSACTION CIF PROCEDURES 1. Seller confirms ICPO + passport of buyer and issues FCO for signing 2. Seller issues contract for amendment and countersigning as per mutual agreement. 3. Seller legalizes and register contract at seller expense and send to buyer as final approved, registered and legalized contract 4. Seller sends to buyer via e-mail, the following POP documents in buyer''s name for verification of the allocation: A. Statement of product availability B. Refinery commentment to supply C. Company profile D. MSDS E. Company license to export 5. Buyer and Seller sign the CPA with the secured shipping company for documentation along with the NCNDA and IMFPA for commission construction
Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 â??) and heavy diesel (with a boiling point range of about 350-410 â??). Widely used in large vehicles, railway locomotives, and ships. The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.
EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.
Diesel Fuel EN590 +/-10ppm Color Aspect: 2.0
I'm direct seller. $480/MT CIF AWSP minimum 50,000MT/month for a year. Ship to Tank. Shipping straight from refineries to any world safe port. No any upfront/deposit. If you need further information on CIF Procedure, please let me know, thank you! PRODUCT:DIESEL FUEL EN590-10PPM ORIGIN:Kazakhstan CURRENCY:USD Price: USD$480 PER MT QUANTITY: At least 50,000 metric tons per month 12 consecutive months DESTINATION: SHIP TO TANK xxx PORT /ASWP MODE OF PAYMENT: SBLC/DLC + MT103/TT(No any upfront/deposit)
En590 diesel 10ppm, jet fuel a1, icumsa 45 sugar spot & contract.
Our 10PPM Diesel Fuel, compliant with GOST R 52368-2005 and EN590 standards, is a premium quality diesel fuel designed for high-performance and efficiency. This diesel fuel contains a maximum sulfur content of 10 parts per million (PPM), making it an environmentally friendly option that meets stringent European emission standards. Key Features: 1. Low Sulfur Content: With a maximum of 10 PPM sulfur, this diesel fuel significantly reduces harmful emissions, contributing to a cleaner environment. 2. High Efficiency: Engineered for optimal combustion, it ensures excellent engine performance and longevity. 3. Regulatory Compliance: Conforms to GOST R 52368-2005 and EN590 standards, ensuring reliability and quality. 4. Versatility: Suitable for use in a wide range of diesel engines, from passenger vehicles to heavy-duty industrial machinery. Benefits: 1. Environmental Protection: Lower sulfur content means reduced sulfur dioxide emissions, helping to combat air pollution. 2. Engine Protection: Enhances engine durability by reducing wear and deposits, leading to lower maintenance costs. 3. Fuel Economy: Improved combustion efficiency results in better fuel economy, saving costs in the long run. 4. Compliance Assurance: Meets international standards, ensuring compatibility and regulatory compliance across different regions. Choose our 10PPM Diesel Fuel for a cleaner, more efficient, and environmentally responsible fuel solution that does not compromise on performance.
Greetings, we trust this message finds you well. We are reaching out to express our warmest regards and extend an invitation for potential collaboration. In order to better understand your requirements, we kindly request you to share the requested quantity for EN590 10PPM. This information will allow us to tailor our offer to meet your specific needs effectively. With authorized access to reputable refineries, we take pride in ensuring the delivery of high-quality products, providing exceptional service and buyer friendly procedures. Our commitment is to foster a mutually beneficial business relationship that goes beyond expectations. Looking forward to your prompt response and the opportunity to discuss further details. Origin : Kazakhstan / Russia
We offer EN590 10ppm diesel fuel for delivery to the ports of Ust-Luga and Primorsk (Leningrad region, Russia) on FOB terms. The minimum volume is 30,000 mt per month, with the possibility of increasing monthly volumes. Signing an annual contract is a priority. The resource of production of PJSC Gazprom Neft. The contract is signed directly with PJSC Gazprom Neft. We also offer the supply of EN590 10ppm diesel fuel in any volume produced by the largest Indonesian oil company on CIF terms to the buyer's ports (Platts depending on the geographical location of the port).
DIESEL EN590 10PPM,,, Dip and Pay as FOB as Ship To Ship only, from Benghazi, Libya, Only for RWA Buyers.. Price: $0.59 / Liter as Dip and Pay .. Quantity per Vessel is from 10,000 - 30,000 MT / Vessel... Procedures is very simple, easy and clear: ICPO --> Seller send CI to Buyer to sign ---> Buyer makes Block Fund in Dubai against CI ---> Dip test and Injection of product ---> Payment... Please contacting through RWA buyers only... Contact: USAMA
Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm/s (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60�°C Maximum 460 micro Copper Strip Corrosion (3h @ 50�°C) Class 1 Oxidation Stability @ 110�°C Minimum 20 hour FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 mi
FOB - DIP & PAY PROCEDURE IN ROTTERDAM: 1. Buyer issues ICPO, company profile, full bank details with reference person, color copy of passport 2. Seller issues Commercial Invoice (CI) to Buyer to be signed and return back. 3. Following receipt of executed CI, Seller provides Buyer with the below listed PPOP: a. Tank Storage Receipt for fuel in shore tank b. Injection Report c. Product Passport Quality and Quantity Analytical Report (Q&Q) d. Authority to Sell and Collect (ATSC) from Ministry Energy e. Statement of product Availability from Ministry Energy f. Certificate of Product Origin g. Warning Letter h. Export License i. Unconditional DTA and ATV for execution of dip test in Seller tank. 4. Buyer conducts the Dip Test with SGS/Intertek/VERITAS/or similar inspectors at his own expense, and upon receipt of the report sends a copy to the Seller. 5. Buyer provides logistics for storage terminal or vessel to Seller, and Buyer, Seller and their logistics schedule injection. 6. Seller injects fuel into Buyer tanks or Vessels. 7. Within 24 hours of completion of injection, Buyer pays for product to the Seller with MT103 TT and at the same time the Seller sends the title documents to Buyer and any additional documents of the POP. 8. After the positive execution of the initial spot Buyer and Seller sign the contract for36 months
EN590 Diesel Fuel EN590 DIESEL FUEL PRODUCT ORIGIN: KAZAKHSTAN DELIVERY: CIF, FOB, TTO INSPECTION: SGS PAYMENT METHOD: TT, MT103, TRC20USDT Quantity. 100, 000MT per month for 13 months. Shipping Terms. CIF is possible, yes. Destination Port. Jurong Singapore possible
Ultra low sulphur diesel EN590 10ppm Specification: colour: STM015 Cerone Number : ASTM 0613 - IP41 Celone Index: fN 1504264
