Process connection as per ASME / EN / AWWA / JIS 3 line LCD backlit display SS construction Bidirectional flow Multiple communication protocols Built-in diagnostics"
Accumax offers water metering solutions based on proven technology of Electromagnetic and represent the next generation of smart metering.Accumax delivers solutions in all shapes and sizes. From individual meters and remote reading systems to fully automated service solutions.The meter is true volume measuring meter. The measurement is independent of viscosity, Density, Dissolved/Undissolved solids, pressure or temperature of the flowing liquid as long as it maintains certain minimum conductivity. Various types of Liner & Electrode are used as per application requirements. Empty pipe detection is also provided.Accumax has in-house R&D centre & calibration setup as per industries standards.Principal of Operation:The Accumax Electromagnetic Flow-meter work on FARADAYs LAW OF ELECTROMAGNETIC INDUCTION. Hence the meter detects flow based on velocity of conductive liquid. Thus the meter are Calibrated in terms of volumetric flow rate from it.Advantages:
Accumax offers water metering solutions based on proven technology of Electromagnetic and represent the next generation of smart metering.Accumax delivers solutions in all shapes and sizes. From individual meters and remote reading systems to fully automated service solutions.The meter is true volume measuring meter. The measurement is independent of viscosity, Density, Dissolved/Undissolved solids, pressure or temperature of the flowing liquid as long as it maintains certain minimum conductivity. Various types of Liner & Electrode are used as per application requirements. Empty pipe detection is also provided.Accumax has in-house R&D centre & calibration setup as per industries standards.Principal of Operation:The Accumax Electromagnetic Flow-meter work on FARADAYs LAW OF ELECTROMAGNETIC INDUCTION. Hence the meter detects flow based on velocity of conductive liquid. Thus the meter are Calibrated in terms of volumetric flow rate from it.Advantages:
Electromagnetic flow meter
Warranty:2 years Type:Flow Sensors, For Water Customized support:OEM, Customized logo, Customized packaging, Graphic customization Model Number:J-MAG Medium:Conductive Liquid Connection:Flange Accuracy:0.2%/ 0.5% Output:4-20mA /RS485/HART Application:Water Flowrate Measure Power Supply:DC24V, 220V Measurement Range:0-1000 (m3/h) Material and Color:Stainless Steel SUS304 Extrode:316L
Size DN3-DN3000 Electrode:SS316,HC,HB,Ti,Tan,Pt Liner Material: PTFE,PFA,FEP,NEOPRENE,HARD RUBBER Accurance: 0.5% of reading velue,0.3% and 0.2% optional Connection: Flange,Tri-clamp,Wafer,Union Introduction Electromagnetic flow meter is hallmarked by its high performance and reliability based on successful, field-proven technology. It is being widely used in industries such as petroleum, chemical engineering, iron and steel, food, electricpower, paper making, water treatment, petrochemical, medicine etc Features Medium temperature can be -20~200. Integrated vertification, diagnostic function and empty pipe detection. Measure forward and reverse direction flows. Built-in reference electrodes, no need to connect ground ring. Dual frequency excitation and stable zero point. Precision coil winding technology, makes magnetic field more uniform. High protection grade,IP65. No moving parts, no pressure loss. High accuracy: ±0.5% of reading,±0.3% and ±0.2% optional, velocity >0.3 m/s. Application Chemical Medicine Beverage Iron and steel Water supply Electricpower Water treatment
Electromagnetic flow meter Our Electromagnetic Flow Meter accurately measures the flow rate of conducting liquids or slurries flowing in closed pipes. Due to simple and right design the Electromagnetic Flow Meter is an obstruction-less & maintenance-free instrument in place of conventional mechanical flow measuring device. The use of "Pulsed DC" technology offers highest ability & better measuring accuracy in form of 4-20 mA DC linearly proportional to volumetric flow Features : Size DIN 10 to DIN 3000 NB pipe line. High Accuracy better than + 0.5% of reading. Zero pressure drop. Suitable for high viscosity conductive liquids. Digital flow rate / Totalizer Indication / Batching system Isolated Transmitting Output 4-20 mA. No Grounding Rings require. Minimum Upstream & Downstream straight length. Compact & Rugged, IP 65 protection. Remote flow indication totalizer / Batching system Data Logging & Wireless Data Transfer System through GSM Modem Applications : Effluent Treatment Plants. Sewage Treatment Plants. Water supply schemes. Steel & aluminum. Pulp & Paper. Chemical & Fertilizers. Food & Drug. Pumps & valve calibration lab. Dairy Industry. Corrosive liquids. Sugar industry. Sugar Industry. Textile and printing textiles Hotels & Resorts Water parks Buildings & Infrastructure Municipal corporation
Description Electromagnetic Flow Meters follow the Faraday Law of Electromagnetic Induction. They are used to accurately measure the flow rate of liquids which are electrically conducting. Nominal Size: 25-200 mm Electrode Material: SS 316L Lining Material: FEP Flange Material: Carbon Steel Flow Sensor Housing: SS 316 Flow Sensor Protection Class: IP 65 Power Supply: 85VAC 240VAC Signal Output: 4~20mA Pulse Output: Adjustable from 0.001 to 1000 L Pulse Communication: RS 485 with Galvanic Isolation, MODBUS Cable Length: 5M Features No moving parts. virtually no pressure lost. Corrosion protection, abrasion resistant. High accuracy, stable performance. High level of anti-vibration and anti-jamming, wide measuring dimensions. Multi output interface: 4~20mA, Pulse, Alarm outputs, RS â?? 485 (Modbus) communication. Working Conditions Pressure Rating: PN16 Temperature Rating:
Sea river measuring waste water treatment diving open channel electromagnetic flowmeter Electromagnetic Flow Meter Chemical Industry, Orifice Plate Flowmeter, High Quality flowmeter Quick Detailsï¼? Place of Origin Henan, China (Mainland) Brand Name WEILI Model Number MGG Accuracy ±0.5% ~ ±1.5% Application Widely Name waste water treatment diving open channel electromagnetic flowmeter Product Name Orifice plate flowmeter Power supply DC24 V/220VAC 50HZ measurement accuracy ±1cm(Pillar diameter 1cm) Output 4-20mA /RS485 Medium Sewage Material SS304 Product Descriptionï¼? Magne W3000 PLUS Diving type electromagnetic flowmeter is mainly used for flow rate measurement in open or closed channels .This flowmeter has been widely used in departments of water supply and sewage in towns ,industrial waste water sewage ,sewage management ,farmland irrigation ,etc. Characteristicsï¼? 1.The body is made of plastics ,resulting in light and corrision resistant structure . 2.The structure is simple and without moving parts .The flowmeter have sturdy resistance against staining,dogging or eroding if a fluid contains suspensions or adherents . 3.The sensor can also be easily installed on any gate of an exsisting water channel .The channel may be an open or closed type with retangular or circular cross section . 4.The flow signal is linear ,having a high measuring accuracy from 100% down to zero flow rate .Stable measurement can be done even when the channel is affected by the tide . Technical Parametersï¼? Nominal Bore: DN50,100,200,400,600,800mm Measuring range 0 ~ 1m/s to 0 ~ 10m/s(Flow velocity) Max diving depth 10m Accuracy ±1.0%;±2.0% Measuring Electrodes 316L Stainless steel , Harrington alloy B/C, Titanium , or special material Medium Temperature 0 ~ +40 Output signals of sensor 0 ~ 0.2mVp ~ p to 0 ~ 2mVp ~ P Output signals of the flowmeter 4 ~ 20mA.Dc and 0 ~ 5000Hz or 0 ~ 2000Hz Electrical conductivity â?¥5μs/cm
Electronet series ELMAG-200 are micro-controller based full bore type electromagnetic flow meters specially used for various industrial applications. These flow meters accurately measure the flow rate of conductive liquids & slurries in closed pipes. Due to its simple and rigid design, the flow meter is an obstruction-less and maintenance-free instrument in place of conventional mechanical flow measuring devices. The use of 'Pulsed DC' technology offers highest ability and better measuring accuracy in the form of electrical signal 4-20 mA DC linearly proportional to volumetric flow. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring flow range.
Electronet series ELMAG-2516 are micro-controller based full bore type electromagnetic flow meters specially used for various industrial applications. These flow meters accurately measure the flow rate of conductive liquids & slurries in closed pipes. The use of 'Pulsed DC' technology offers highest ability & better measuring accuracy in the form of electrical signal 4-20 mA DC linearly proportional to volumetric flow.
1. Caliber: DN3~DN3000 2. Color: White, blue 3. Display: High visible backlight LCD 4. Nominal pressure: 0.6 ~ 4.0 MPa 5. Ambient Temp: -25 Deg C~+ 60 Deg C 6. Accuracy: 0.5%, 0.3%, 0.2 (selectable) 7. Voltage Supply: 12 ~ 36V DC, 85 ~ 265V AC 8. Protection Class: IP65, IP67, IP68 9. high definition of background LCD display Output: 4-20mA, pulse Lining material: Rubber, PTFE (also called F4) Connection: Flanged, clamp-on, threaded Type: Comapt type, remote type Communication: MODBUS, RS485, HART Package: carton and wooden box
Diameter DN3 to DN3000 Accuracy 0.5;1.0 Flow rate range 0.1~15m/s Conductivity =5µm/s Fluid temperature Ordinary rubber liner -20~+60? High temperature rubber liner -20~+90? Ptfe liner -30~+100? High temperature Ptfe liner -30~160? Power supply: 24VDC;220VAC Straight pipe requirements Pipe type: upstream=5D,downstream=3D Connection mode : Flange connection are between flow meter and piping that follows GB11988 rules Explosion-proof grade: Exd?CT4 Display : LED displayer
There are two major factors for the converter to work with the mag. Sensor: the excitation current and the resistance of the sensor coil. As long as these two factors are suitable, the converter can fit any mag. Sensor made by various manufacturers. To fulfill this, a pwm current excitation technique is implemented to excite the coils ranging from 5 ohms to 120 ohms. The constant current can be set to 100ma, 125ma, 200ma, 250ma, 375ma, and up to 500ma to suit most commonly used signal level.
The rbef series electromagnetic flow meters is suitable to measure volumetric flow rate of the conductive liquid and slurry in the closed pipe, e.G. Clean water, sewage, various solutions of acid, alkali, salt; slurry, slag, pulp and other liquids such as food-beverage etc. Features Not affected by the change of the fluid condition such as density, viscosity, temperature, pressure and conductivity, and the signal Output of inductive voltage is linear to average velocity, therefore It has a high accuracy of measurement. No obstacle parts in the meter tube so that no extra pressure loss; no movable parts, so meter has long operation life. Short straight pipe required, only 5d for upstream and 3d for downstream due to the inductive voltage signal which is the average value in the cross-section of the pipe. Only liner and electrode contact to the fluids, choose proper material of liner and electrode to prevent it from corrosion to ensure meter long operation life. Mcu and smt technology used in converter to make it has high performance, high accuracy, low power consumption,
To verify compliance to specifications, products are inspected at different stages i.E. In-coming, in-process and final stage. Wherever considered necessary this is done as per written work instructions. Record is made of this verification to compliance or otherwise. No product is allowed to be delivered to the customer unless an authorized person has confirmed its compliance.
FEM Electromagnetic Flow Meters are kind of meters to measure conductive liquid, corrosive liquid with strong acid or alkali. Our FEM Series provide a wide of size range and material measurement with sensor and converter. Applications include agricultural, food & beverage, chemical, pump & paper and water & waste water. General Spec: Accuracy : ± 0.5% Repeatability : ± 0.2% Humidity : 5 to 95% Material – Electrode : 316 Stainless Steel, Titanium, Tantalum, Hastelloy alloy, Platinum Liner : Rubber, PTFE Housing : Carbon Steel, 316 Stainless Steel Temperature – PTFE : 150oC (Option-180oC) - Rubber : 80oC Pressure : 10Mpa (Option-1.6, 2.5, 4.0Mpa) Analog Output : 4-20mA, 500 ohms Max. Load Output Frequency : Scaled Pulse Output (Open Collector), Max. KHz Power Supply : AC220V or DC24V Communications : RS232, RS485, MODBUS, HART Explosion : Explosion ExdIIBT4-T6 Protection : IP65 (Option: IP68) Connection : Flange (DIN, JIS/KS, ANSI).
Product Application Water supply engineering, sewage treatment engineering and other flow monitoring. Technical Parameter Tube Diameter: from 300 to 3000mm Velocity Range: from 0.1 to 10m/s Accuracy: 0.5 ~ 10m/s, + 1.5%FS, 0.1 to 0.5m/s, and + 2.0%FS 0.1 ~ 10m/s, + 2.54%FS Electrical conductivity: > 5 mu s/cm Straight Tube Upstream 5DN, Townstream 3DN Medium temperature: -20 C ~ +130 C Ambient temperature: -20 C ~ +60 C The pressure: â?¤1.6MPa Protection grade: IP65 (intagratation), IP68 (divided) Electrode Material: 316L stainless steel Output signal: 4-20mA; RS485; HART protocol; MODBUS protocol Sensor material: stainless steel Working Power: 220VAC; tolerances of 15% or 24VDC, the rippleâ?¤ 5% Power: 6.5W
Electromagnetic flowmeter is composed of sensor and converter. It has two forms: compact-type and remote-type. The remote-type also needs a special double-layer shielded cable to connect the converter and the sensor. There are seven kinds of electrode materials and four kinds of lining materials available for sensor.
Electronet series ELMAG-600 are Battery Operated flow meters. It is ideal when connecting to a power is difficult or expensive. When no mains power is available, a battery powered ELMAG-600 gives the flexibility to install a reliable water flow meter virtually anywhere without distorting accuracy & performance. ELMAG-600 is provided with 2 years continuous battery operation. It is extremely easy to use, simple to install into position & no regular maintenance required. The product is engineered for various industrial as well as domestic applications such as Munciple & Industrial water / Waste Water applications, Cooling tower water treatment, well usage reporting etc. The graphical display provides indication for flow rate & totalised flow with key selection. The display will auto shut off after 10 min. Which saves the battery life. The display can be made ON by pressing the 'enter' key. The totalised value of a day is get stored in the data logger. Low battery indication is provided through software on display & flow meter will perform the expected results just replacing the battery.