APP modified membrane
Description: SBS (styrene-butadiene-styrene) thermoplastic elastomeric modified bitumen waterproof membrane is a waterproofing membrane with polyester felt,glass fiber or glass fiber polyester felt as reinforcement,finishing the upper surface with PE film,fine sand or mineral granule. APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc. Specification: Thickness: 3mm 4mm 5mm Width: 1m Length: 7.5m/10m or customized Base: Polyester/Fiberglass Felt Surface: PE film, Aluminum foil, Yellow sand, Mineral Particle
1. Capacity: 5 to 10 million square meters per year. 2. Carrier: Polyester, fiberglass, composite 3. Modifier: SBS, APP 4. Surfacing material: sand, slate, PE film, aluminum foil etc., Embossed or plain. 5. Speed: 0~40m/min, adjustable 6. Total installed power: 110~700kwh 7. Fuel consumption: 0.6 million ~2 million kcal/h 8. Water consumption: 0.2 t/day 9. Operator: 8~12 10. Min size of main workshop: 60,15,8 (L*W*H) 9 pieces of 40 feet HQ, 16 pieces of 40 feet OT.
The products are made by soaking the base in bituminous or thermo plasticity elastomeror thermoplastics modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. 100mm*10m
The products are made by soaking the base in bituminous or thermo plasticity elastomer(such an styrene butadiene styrenef¼SBS),or thermoplastics(such as atactic Polypropylene---APP,APAO,APL)modified bitumenous, then covering double faces with elastomer(SBS)or thermoplastics(APP,APAO,APL)modified bitumenous, and last finishing the upward face with fine sands, mineral slates(or grains)or polythene membrane while downward face with fine sands or polythene membrane. good self heating, easy application, and long service, etc.
SBS modified bitumen waterproof membrane takes SBS (styrene-butadiene- styrene) thermoplastic elastomer modified asphalt mixed with additives as base materials, using premium polyester (PY), fiberglass (G), fiberglass & polyethylene felt (PYG) as matrix , and adopting sand (S), mineral granule (M), polyethylene film (PE), aluminum foil etc as dip-coat, which is produced by stirring and grinding with special equipment. Features A)Good low temperature flexibility,it has no crack when temperature drops into -20â??;Excellent heat resistance, it has no flow when temperature reaches 90â?? B)Great tensity,prolonged life span,easy to use C)Suitable forâ? and â?¡grade constructional waterproofing project,especially for cold area and the project of frequent structural deformation Size Available â?¢Width-3.28ftï¼?1mï¼? â?¢Length-24.6ft(7.5m) 32.8ft(10m)49.2ft(15m) â?¢Thickness- PY (3mm,4mm,5mm) G (3mm,4mm) APP modified bitumen waterproofing membrane based on APP (atactic polypropylene) or APAO, APO (It is reported that tiring polymer) modified asphalt roofing, high-quality polyester felt, fiberglass mat base for the child, with fine sand and mineral tablets (piece) material, PE film for the cladding material, the use of advanced technology refined plastomer modified bitumen membrane. Features A)Good elongation;Good anti-weathering;Excellent flexibility B)Strong adhesion;High strength;Anti-abrasion and anti-impact C)Superior High and low temperature resistance,especially for hot areas D)Easy to apply,heat-welded;Anti-corrosion,anti-mildew ADVANTAGES â?¢Over 1000 cases in waterproofing projects â?¢Accredited contract observing enterprise â?¢15 years of experience in waterproofing industry â?¢Self-contained production line,sound and completed production management systems â?¢Multiple advanced first-class production devices,laboratories,experienced researching panels â?¢3 years of innovation in production craftmanship and 10 proprietary products Guangdong Tenjoy has two brands of building materials-- Tenjoy,Zolon,fits in the needs of residential construction and industrial construction waterproofing projects,which is specialized in the development,production and sales of waterproofing material,including waterproofing membrane,waterproof coating,waterproofing mortar,lost circulation material, water stop and so forth. Given the strong power in product development,a wide range of measuring instruments,the automatic production line of bituminous waterproofing membrane and macromolecule waterproof coating,water stop,automatic paint mixer and racking machine,we can fully meet the needs of domestic major engineering projects with the annual production capacity of 10 million square meters in waterproof membrane,60 thousand tons of paint,8 tons of waterproof slurry.
Specification thickness:2mm 3mm 4mm 5mm width:1m length:7.5m,10m,15m Certificate CE,ASTM standard, ISO Pakaging 7.5sqm or 10sqm per roll plastic sack by rolls or pallet
Tearing strength: 250/350 n
Bitumen Product Description : Bitumen is widely used in the construction of asphalt roads and bituminous membrane products. Bitumen is commonly used to build highways, motorways and rail networks. Bitumen has excellent water-proofing properties and is widely used for making roofing products along with a range of other household and industrial applications, from emulsion paints to sound-proofing. Penetration Bitumen and Bitumen Emulsions are used for the construction of railway tracks and by using special types of bitumen such as Polymer Modified Bitumen, the vibration and noise levels are reduced due to a dampening effect. Bitumen has been proven to be effective on both high-speed railway tracks and heavy load railway tracks. Bitumen is also used for surfacing airfield runways and air strips (PMB is preffered due to its fuel resistant properties) and taxi ways. For the Marine construction industry bitumen is used for hydraulic applications such as canal lining, underwater tunnels, river bank protection, dam construction and sea defences. There are also numerous industrial applications like roofing felt material, printing inks, packaging paper, linoleum, electrical cable / Junction box insulation, mastic for roofing of terraces, and duplex paper manufacture. Price of product ( USD price or FOB price) : 3.000 MT monthly market price. 10.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : Specifications for types/grades of Oil Bitumen according to buyer specifications and/or will be given upon received buyer credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : MOQ 3000 MT Bulk in tanker vessels. Drums 150/180/200 Kg. Jumbo bags 1000 Kg. Poly bags 32 Kg. Tanks 20 MT.
We are supplier and exporter of Bitumen. Bitumen is used in road construction due to various properties and advantages. The bitumen as a raw material in flexible road construction and bitumen as a mix (composing other materials i.e. aggregates etc.) serves certain advantages, that prompt to use bitumen widely in road construction.
Product category: 1. According to reinforcement: polyester felt(PY) , glass fiber mat(G) and glass fiber reinforced polyester felt(PY) 2. Acoording to isolation materials: upper surface: polyethylene film(PE), sand(S) and mineral slates(M) 3. According to membrane performace: I Grade and II Grade Features: 1. With high tensile strength, high elongation rate and strong adaptability to the shrinkage deformation and cracking of the infrastructure. 2. Excellent resistant to high and low temperature, applicable for hot and cold regions, especially for cold regions 3. Good resistant to acid and alkali corrosion, weather resistance 4. Construction convenience, hot melt method and cold adhesion method. Usage : SBS elastomeric bitumen waterproof membrane is widely used in all kinds of industry and civil building waterproof and seepage waterproof engineering: roof, basement, subway, tunnel, concrete payment bridges, sewage treatment plant, landfill field, canals, water pool, swimming pool etc.
Bitumen, often referred to as asphalt, is a viscous, black, and sticky substance. It is a semi-solid form of petroleum and is primarily used as a binder in road construction. When mixed with aggregates, it forms asphalt concrete, the material commonly used for paving roads. Primary Characteristics: Appearance: Thick, black to dark brown substance. Temperature Sensitivity: Becomes liquid when heated and returns to a semi-solid state upon cooling. Water Resistance: Acts as a waterproofing agent, making it ideal for various sealing applications. Adhesion: Excellent adhesive properties, allowing it to bind aggregates together effectively. Grades & Types: Bitumen comes in various grades, primarily determined by its viscosity and penetration value. Common types include: Paving Grade Bitumen: Used in road construction. Oxidized Bitumen: Produced by air blowing and has stiffer properties. Cutback Bitumen: Bitumen diluted with solvents to reduce viscosity for specific applications. Modified Bitumen: Bitumen altered with polymers to enhance its properties. Applications: Road Construction: Mainly used as a binder mixed with aggregates to pave roads. Roofing: Used as a waterproofing agent in roofing felts. Dams & Reservoirs: Acts as a waterproofing membrane. Soundproofing: Used in soundproofing materials due to its insulating properties. Advantages: Durability: Offers a long-lasting paving solution, able to withstand various weather conditions. Cost-effective: Provides a reliable and economical material for large-scale infrastructure projects. Recyclable: Old bituminous roads can be reprocessed to produce new roads.
RCS 002 BITUMEN EMOLUSION ( BITUMEN PRIMER ) RCS 001 BITUMEN ( BITUMEN PRIMER ) RCS 003 BITUMEN RUBBER SOLUTION WATERPROOFING RCS 004 SBS RUBBER BASED ELASTROMETRIC LIQUID MEMBRANE RCS120 BRB ANTI ROOT ELASTIC BITUMEN LIQUID MEMBRANE RCS ECO RUBBER BASED LIQUID BITUMEN MEMBRANE RCS 1C RUBBER MODIFIED , WATER BASED ELASTROMETRIC BITUMEN MEMBRANE SCS 2C RUBBER BASED , CEMENT AND FIBRE MODIFIED 2 COMPONENT BITUMEN MEMBRANE
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
En590, jet fuel a1, petroleum, oil, gasoil, gasoil, crude oil, copper cathode, aluminum billets, used rails, aluminum ingots, copper, copper wire scrap 99.99%, steel, quartz, diesel, jet fuel, d6, bitumen, lng, petroleum coke, coal, cement, fertilizers, urea 46, npk, sulfur, euro pallets, wooden pallets, tomato paste, frozen potatoes, frozen french fries, mangoes, cashew, frozen chicken, frozen fish,sugar icumsa 45, sugar, salt, saffron, rice, beet pellets, beet molasses, herbs & spices, milk, frozen & fresh strawberries, frozen & fresh fruits, frozen & fresh vegetables, pvc scrap, coltan, aluminum ingot a7, onion, apple, gala apple, pomegranates, orange, rice, soybeans, sesame, fertilizer, chicken paws, banana, diesel en590 10ppm, urea granular 46%, beans, Aluminum Ingots a7, vanilla, dried fruits, ginger, petroleum product, yellow corn, maize, melon, watermelon, honey, yam, cacao, cooking oil, whole chicken..