1.The uniform dual-braided design consists of interwoven spirals providing greater flexibility and improved twist resistance compared to other spiral designs. 2.Layers of the hose wall are fully bonded to enhance kink resistance enabling tighter bends. 3.The rugged elastomeric hose cover is resistance to gasoline, diesel fuel ,oil and commonly used road and cleaning chemicals. 4.The hose cover may be perforated in some sizes to allow moisture to escape from the reinforcement layer. 5.UV and ozone resistant. 6.Meets or exceed SAE J1402-Type-A 7.Meets or exceeds DOT FMVSS No.106-Brake Hose,49 CFR571.106 8.Minimum burst pressure of 900psi. 9.Designed for operating pressure up to 225psi 10.Operating temperature of -40¨H to +200¨H(-40¡æ to+93¡æ). ArticFlex air brake hose: Rated at -65¨H 11.Designed to provide flexible air-connection from frame to axle or between tractor and trailer where exposed to flexing, pulling or impact 12.Suitable for use with factory-assembled, permanently attached fittings or with field ¨Cattachable reusable fittings. 13.Available from stock in a wide selection of lengths and end-configurations.
UNION TEE; 90 DEGREE MALE ELBOW; MALE BRANCH TEE; SLEEVE; NUT; INSERT STEEL; MALE CONNECTOR; UNION
1/4" 5/16" 3/8" 7/16" 1/2" 5/8"
MODEL: 452711Y/B/R SIZE: 100X18/ 100X20/ 100X22/ 100X25 AIR INLET THREAD: Z 1/4", Z 1/2", Z 3/8"
RECOMMENDED FOR USE IN AUTOMOTIVE AIR BRAKE SYSTEM
Ozone resistant, abrasion resistant, oil and weather resistant, large temperature range, excellent performance with steady and reliable brake effect.
This recommended practice covers minimum requirements for air brake hose assemblies made from reinforced elastomeric hose and suitable fittings for use in automotive air brake systems including flexible connections from frame to axle, tractor to trailer, trailer to trailer and other unshielded lines Standard: SAE J1402 /GB16897 -2010 Construction: Tube: EPDM Black synthetic rubber. Reinforcement: High strength synthetic fiber. Cover: Black, red and blue ASTM IRM903 oil-ozone- resistant synthetic rubber compound. Working Temperature: -40 to +120 Air Pressure Brake Hose Assembly Application: Used for hydraulic brake systems to transmit and contain the fluid pressure medium, which offer the force to the vehicle auto air brakes system. Features: The hoses are braided with fiber, and such very good performance as the following: good flexibility, bursting resistance, high tensile strength, low extensibility under pressure, ozone resistance, low-temperature and high-temperature resistance, with stable, safe and reliable braking effects. Air Brake Hose is recommended for air brake applications. Meets all DOT and SAE J1402A requirements. SAE J1402A air brake hose Tube: EPDM | REINFORCEMENT: PET | COVER: EPDM Exceptional weathering and ozone resistance 2-spiral polyester reinforcement Meets SAE J1402A dimensions Temperature range -40 F to 200 F (-40 C to 93 C) Rubber air brake is designed for compressed air brake systems on trucks and buses. This hose meets SAE J1402 specifications. Rubber air brake hose is typically used where it will be subject to gravel, rocks, oil, vibration, etc. whereas nylon air brake is typically routed inside the frame where it will not be subject to debris, vibration, etc. Our hose is a standard hose and is designed for use in very cold environments down to -54C (-65F). Applications: Flexible hose suitable for air brake systems. Tube: Synthetic rubber, black, smooth, oil resistant. Reinforcement: Synthetic cord. Cover: Synthetic rubber black, smooth, high temperature and ozone resistant. Standard: SAE J1402. Recommended for air brake hose, high temperature pressurized oil return lines and rotary oil/air compressor lines, engine and transmission coolant lines and lube oil lines. Meets or exceeds DOT FMVSS 106-74, SAE J1402 for air brake hose (4, 6, 8, 10). Not recommended for gasoline or diesel fuel applications.
NYLON TUBE Material: Nylon 6(PA6)/Nylon 11(PA11)/Nylon 12(PA12) Hardness: 60D/64D Fluid admitted: Air, Water, Oil, Normal solvents Service temperature range: From -40~ +100 Features: The Nylon tube excels in resistance to abrasion and cracking, Excellent resistance to solvents, higher or lower temperatures, oils, greases, petroleum products Application: Suitable for air, water, chemicals, lubrication, instrument line, irrigation control system, auto parts, fuel delivery pipe, electrostatic insulator, etc
Automotive hydraulic brake hose Sizes: 3.2mm*10.5mm Working temperature:-40 to 100degree Construction: EPDM+PVA+NBR+PET+EPDM Working pressure: 276bar
Automotive brake hose fittings, brake hose, air conditioner fittings, air conditioner hose, power steering hose, hydraulic pipe fittings, and other pipe fittings. As customer requirement
Brake hose: SAE J1401 standard +Motorcycle brake hose: 3.2mm X 10.5mm 1/8"HL +Automobile brake hose: 3.2mm X 10.5mm 1/8"HL 3.2mm X 12.5mm 1/8"HL 4.8mm X 12.5mm 3/16"HL 2>Air brake hose: SAE J1402 Standard 10mm X 17mm 3/8"HL 10mm X 19mm 3/8"HL 13mm X 22mm 1/2"HL 3>Stainless steel braided brake hose: 3.2MM X 6.5MM 3.2MM X 7.5MM 4>steel tubing for various coating: copper,polish,white zinc,pvf,olive green,etc. 4>Hose assembly: any kinds of hose assembly can supply to you, and made according to OEM No. or your drawings or samples 5>Fittings & brake pipe & brake tube & nuts: any kinds of hose fittings according to your drawings or samples, or our drawings. 6> Hose crimping machine and mould and Stainless steel braided brake hose and Fuel hose, air conditioning hose...
Automotive brake hose fittings, brake hose, air conditioner fittings, air conditioner hose, power steering hose, hydraulic pipe fittings, and other pipe fittings. As customer requirement
Our products are exported to many countries and we have been committed to product perfection for many years. We accept OEM customization from customers, and customers can also sell our brands. Become our agent. Looking forward to your inquiry and participation. We will give you the best price, please contact me if necessary.
Our products are exported to many countries and we have been committed to product perfection for many years. We accept OEM customization from customers, and customers can also sell our brands. Become our agent. Looking forward to your inquiry and participation. We will give you the best price, please contact me if necessary.
Excellent coil memory and durability Flexible in temperature to -65 ¡æ Resistant to gasoline, diesel fuel,ultaviolet and commonly encountered chemicals Up to 5 times more abrasion-resistant than competing cables Durable Buffalo die-cast plugs are standard Robust"T-Grip" resists breakage.
KST brand brake hoses are DOT certified quality products. Made according to SAE J1401 standard, meet and surpass FMVSS 106, ISO 3996 etc international safe standards. Feature: Original Equipment quality. Six years average life at least Output strong braking power, Every hose is 100% pressure testing at 3500PSI. 3000 KST numbers cross reference Delphi, Wagner, Bendix, Reybestos, CEF, Keybol, ATE, Meyle, Febi etc 100 famous companyí»s numbers and more than 10,000 OEM numbers. Suit American, European and Asian (Japanese, Korean, Chinese, Indian) etc. all passenger vehicle, light commercial vehicle and classic cars series vehicle with hydraulic brake system. American series: GM, FORD, CHRYSLER GM: Buick, Cadillac, Chevrolet, Daewoo, Oldsmobile, Pontiac, GMC etc. FORD: Falcon, Lincoln, Mercury, Mustang, Fairmont, Granada, Tunderbird, Grand Marquis etc Chrysler: Dodge, Jeep, Plymouth, Studebaker etc. European series: Audi, BMW, Mercedes Benz, Opel, Volkswagen, Volvo, Saab, Jaguar, Renault, Rover, Land Rover, Alfa Romeo, Fiat, Citroen, Peugeot, Seat, Talbot, Lancia, Vauxhall, Skoda, Lada, Yugo Zastawa, Iveco etc. Asian series: Toyota, Honda, Nissan, Mitsubishi, Suzuki, Isuzu, Subaru, Mazda, Daihatsu, Proton, Hyundai, Kia, SsangYong etc.
feature: Low volumetric expansion, Ozone and UV resistance, Exclusive whip dampener, Excellent moisture resistance, High corrosion resistance, Superior weather resistance cover material, Low and high temperature toughness range -50íp C to 121ípC, Compatible with FMVSS 116 DOT 3, DOT 4 and most non-petroleum based brake fluids, Reasonable construction with three layer rubber and two braid PVA reinforced. hydraulic brake hose.
1.Bracket All parts stamped from mild steel and chromoly, stainless steel. Connector tabs, Mounting Tabs & Retaining Clips, Lock Tabs,Frame Tabs, Brake hose bracket, Brake Line Tab, Caliper Brackets, Brake Strut Rod Brackets, Brake Tabs, Pedal Plates, etc 2.Rubber Accessory Made with EPDM rubber long time life feature and exact size for different brake hoses. Plastic clamp 3.Banjo bolt Can be made of mild steel, stainless steel, brass material. 4. Copper washer Widely using for hydraulic brake system parts like caliper, master and wheel cylinder, banjo bolt etc for high pressure sealing power. 5. Brake hose clip 6. Protector spring Two types spring as protector for brake hoses. Metal spring and Nylon Spring. Can be cutted in any length as request. BRAKE LINES ACCESSORY: 1.Tube nut Can be made of mild steel, stainless steel, brass material. 2.Brake adapter fitting, brass tee Made of mild steel, stainless steel, brass material. 3.Bleed screw Can be made of mild steel, stainless steel, brass material. 4.Union, Joiner Made of mild steel, stainless steel, brass material. 5.Locknut. Can be made of mild steel, stainless steel material.