1.The uniform dual-braided design consists of interwoven spirals providing greater flexibility and improved twist resistance compared to other spiral designs.
2.Layers of the hose wall are fully bonded to enhance kink resistance enabling tighter bends.
3.The rugged elastomeric hose cover is resistance to gasoline, diesel fuel ,oil
and commonly used road and cleaning chemicals.
4.The hose cover may be perforated in some sizes to allow moisture to escape from the reinforcement layer.
5.UV and ozone resistant.
6.Meets or exceed SAE J1402-Type-A
7.Meets or exceeds DOT FMVSS No.106-Brake Hose,49 CFR571.106
8.Minimum burst pressure of 900psi.
9.Designed for operating pressure up to 225psi
10.Operating temperature of -40¨H to +200¨H(-40¡æ to+93¡æ).
ArticFlex air brake hose: Rated at -65¨H
11.Designed to provide flexible air-connection from frame to axle or between tractor and trailer where exposed to flexing, pulling or impact
12.Suitable for use with factory-assembled, permanently attached fittings or
with field ¨Cattachable reusable fittings.
13.Available from stock in a wide selection of lengths and end-configurations.
UNION TEE; 90 DEGREE MALE ELBOW; MALE BRANCH TEE; SLEEVE; NUT; INSERT STEEL; MALE CONNECTOR; UNION
Ozone resistant, abrasion resistant, oil and weather resistant, large temperature range, excellent performance with steady and reliable brake effect.
Brake hose: SAE J1401 standard +Motorcycle brake hose: 3.2mm X 10.5mm 1/8"HL +Automobile brake hose: 3.2mm X 10.5mm 1/8"HL 3.2mm X 12.5mm 1/8"HL 4.8mm X 12.5mm 3/16"HL 2>Air brake hose: SAE J1402 Standard 10mm X 17mm 3/8"HL 10mm X 19mm 3/8"HL 13mm X 22mm 1/2"HL 3>Stainless steel braided brake hose: 3.2MM X 6.5MM 3.2MM X 7.5MM 4>steel tubing for various coating: copper,polish,white zinc,pvf,olive green,etc. 4>Hose assembly: any kinds of hose assembly can supply to you, and made according to OEM No. or your drawings or samples 5>Fittings & brake pipe & brake tube & nuts: any kinds of hose fittings according to your drawings or samples, or our drawings. 6> Hose crimping machine and mould and Stainless steel braided brake hose and Fuel hose, air conditioning hose...
Excellent coil memory and durability Flexible in temperature to -65 ¡æ Resistant to gasoline, diesel fuel,ultaviolet and commonly encountered chemicals Up to 5 times more abrasion-resistant than competing cables Durable Buffalo die-cast plugs are standard Robust"T-Grip" resists breakage.
We are a professional manufacturer of brake hose in China. Our main products including below: 3.2mmx10.5mm 1/8" hl sae j1401 (two layer red reinforced) Others like 3X11mm 4mmx12mm, 4.8mmx12.5mm etc Air brake hose, prower steering hose Stainless steel braided brake hose 3.2mmx7.5mm Our brake hose can be used on any hydraulic brake system of car, motorcycle, scooter, atv, snowmobiles, forklift, light truck and three wheelers etc. Our main product hydraulic brake hoses have the advantage of a firm agglutinate between the outer rubber and the yarns, which resist brake fluid, ageing and leakage.
Dot hydraulic brake hose Standards: fmvss 106 dot, sae j1401, ms-ea70, esa-m96d4-a, gm6403m, iso 3996, jis d2601, fr31302 1973, adr 7, ntc 977, tl-vw 821 52, gb16897-97 etc Application: vehicle with hydraulic brake system. Car, passenger cars, multi-purpose passenger vehicles, light truck, trucks, buses, trailers, light commercial vehicle, jeep, motorcycle, scooter, atv, forklift, snowmobile, three wheeler etc. Feature: Low volumetric expansion, Ozone and uv resistance, Exclusive whip dampener, Excellent moisture resistance, High corrosion resistance, Superior weather resistance cover material, Low and high temperature toughness range -50° c to 121°c, Compatible with fmvss 116 dot 3, dot 4 and most non-petroleum based Brake fluids, Reasonable construction with three layer rubber and two braid pva reinforced. Brake hose assembly, hydraulic brake hose, hose end fitting, bracket, bundy tube, low carbon steel tube, copper tubing, rubber accessory, protector spring, tube nut , banjo bolt, locknut, copper washer, bleed screw, union, joiner, brake adapter fitting, air conditioning hose, power steering hoses and assembly, oil, fuel transmission hose, air brake hose Clutch hose, hydraulic clutch hose, flexible, motorcycle, automobile, automobile hose, motorcycle hose, brake tube hose, brake pipe hose, brake line hose, brake cable hose, dot, left brake hose, right brake hose, front brake hose, rear brake hose, sae j1401, fmvss 106, iso 3996, jis d2601, ntc 977, adr 7, ameca fmvss 106 dot, 3.2mmx10.5mm, 4.76mmx12.5mm, 1/8 hl brake hose, 3/16'' brake hose, brake hoses, clutch hose assembly, brake parts; hose, lincoln, buick, cadillac, jeep, ford, chrysler, chervole, gm, cherokee, dodge, rolls-royce, astonmartin, jaguar, land-rover, porsche, bmw, benz, opel, volkswagen, audi, renault, peugeot, citroen, volvo, saab, brake hose accessory, , fiat, toyota, lexus, honda, mitsubishi, mazda, daihatsu, nissan, subaru, ssangyong, daewoo, hyundai, kia, lada, tata
We are a professional manufacturer of brake hose in china. Our main products including below: A brake hose 3.2mmx10.5mm 1/8" hl sae j1401 (two layer white rayon reinforced). 3.2mmx10.5mm 1/8" hl sae j1401 (two layer red and one layer white rayon) 3.2mmx10.5mm 1/8" hl sae j1401 (three layer red rayon reinforced). Others like 4mmx12mm, 4.8mmx12.5mm etc Air brake hose, air conditioning hose Stainless steel braided brake hose 3.2mmx7.5mm B. Brake hose fitting (according to samples or drawings) C. Brake hose assembly (according to samples or drawings) Our brake hose can be used on any hydraulic brake system of car, motorcycle, scooter, atv, snowmobiles, forklift, light truck and three wheelers etc. Our main product hydraulic brake hoses have the advantage of a firm agglutinate between the outer rubber and the yarns, which resist brake fluid, ageing and leakage. Our products have gotten the following certificate: DOT CCC ISO9001:2000. Sae j1401 3.2mmx10.5mm Packaged in cartons.
We are a professional manufacturer of brake hose in China. Our main products including below: A brake hose 3.2mmx10.5mm 1/8" hl sae j1401 (two layer white rayon reinforced). 3.2mmx10.5mm 1/8" hl sae j1401 (two layer red and one layer white rayon) 3.2mmx10.5mm 1/8" hl sae j1401 (three layer red rayon reinforced). Others like 4mmx12mm, 4.8mmx12.5mm etc Air brake hose, air conditioning hose Stainless steel braided brake hose 3.2mmx7.5mm B. Brake hose fitting (according to samples or drawings) C. Brake hose assembly (according to samples or drawings) Our brake hose can be used on any hydraulic brake system of car, motorcycle, scooter, atv, snowmobiles, forklift, light truck and three wheelers etc. Our main product hydraulic brake hoses have the advantage of a firm agglutinate between the outer rubber and the yarns, which resist brake fluid, ageing and leakage. Our products have gotten the following certificate: DOT CCC ISO9001:2000. Sae j1401 3.2mmx10.5mm.
Supplier: Air brake hose, gladhand, power coil, brass fittings
