40G QSFP+ to QSFP+ DIRECT ATTACH CABLES ITEM NO.:EQSPPD4A-324CXX DATA RATE:40G PRODUCT ORIGIN:Made in China SHIPPING PORT:ShenZhen Features Compliant QSFP MSA specifications Fully compatible with IEEE802.3ba and Infiniband QDR specifications 40Gb/s total bandwidth 4 independent duplex channels operating at 10Gbps, also support for 2.5Gbps, 5Gbps data rates 100 ohm differential impedance system Single 3.3V power supply, low power consumption,
Features - Transmission data rate up to 25.78Gbps - 850nm VCSEL laser - PIN photo-detector - Internal CDR on both transmitter and receiver channels - Low power consumption < 1W - Hot-pluggable SFP28 form factor - Up to 70m on OM3 MMF and 100m on OM4 MMF - Digital diagnostics functions are available (optional) - Operating case temperature range 0�°C to +70�°C - 3.3V power supply voltage - RoHS-6 compliant Applications - IEEE 802.3by 25GBASE-SR
Features - Full-duplex active optical cable - Up to 10.3125Gb/s per channel - Hot-pluggable SFP+ MSA-compliant connectors - 1W maximum power dissipation per end - Built-in digital diagnostic functions - Commercial operating case temperature range: 0 to 70�°C - RoHS-6 compliant (lead free) Applications - High performance computing interconnect - 10G Ethernet interconnect
Features - Compliant with SFF-8402 and SFF-8432. - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Lowest total system EMI solution - Optimized design for signal integrity - Operating temperature: -5~70â?? - RoHS compliant Applications - 25G Ethernet
Optical transceivers, sfp, 10g sfp+, 25g sfp28, 40g qsfp+, 100g qsfp28 , 400g qsfp dd, direct attach cables (dac), active optical cables (AOC), ethernet media converter, fiber optical patchcord, bwdm, cwdm, dwdm mux/demux and 100g repeater products..
Features - Compliant with SFP+ MSA - Compliant with SFP MSA (INF-8074i) - Support for multi-gigabit data rates up to 10.5Gbps - Support for 1x, 2x, 4x and 8x Fiber Channel data rates - Hot Pluggable SFP 20PIN footprint - Serial ID module on MOD(0-2) - AC coupling of PECL signals - EMI/EMC performance - Low Power consumption
Features - 4 independent full-duplex channels - Up to 11.2Gb/s data rate per channel - MTP/MPO optical connector - QSFP+ MSA compliant - Digital diagnostic capabilities - Up to 100m transmission on OM3 multimode ribbon fiber - CML compatible electrical I/O - Single +3.3V power supply - Operating case temperature: 0 to 70oC - XLPPI electric interface - Maximum power consumption 1.5W - RoHS-6 compliant Applications - Rack to Rack - Data Center - Infiniband QDR, DDR and SDR - 40G Ethernet
Optechs 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Features * QSFP-DD MSA compliant * 8 parallel lanes on 850nm center wavelength * Compliant to IEEE 802.3bs Specification * Up to 100m transmission on multi-mode fiber (MMF) OM3 with FEC * Operating case temperature: 0 to 70�°C * 8x53.125Gb/s electrical interface (400GAUI-8) * Data Rate 53.125Gbps (PAM4) per channel. * Maximum power consumption 12W * MPO-16 connector * RoHS compliant Applications * Data Center Interconnect * 400G Ethernet * Infiniband interconnects * Enterprise networking
Definition of 400G QSFP-DD Transceivers QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Multi-mode Transceivers Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver. 400G QSFP-DD SR8 The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA. Single-mode Transceivers Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance. 400G QSFP-DD DR4 The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD DR4+ The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD LR4 The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD Loopback The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.
Features - QSFP MSA compliant - Four independent full-duplex channels - Supports 103.1Gb/s aggregate bit rate - Up to 100m OM4 MMF transmission - Operating case temperature: 0 to 70ï?°C - 4x25G electrical interface (OIF CEI-28G-VSR) - Single 3.3V power supply - Maximum power consumption 2.5W each terminal - RoHS-6 compliant Applications - 100G Ethernet - Infiniband EDR
Features - QSFP28 End: Compliant with QSFP28 MSA specifications - SFP28 End: Compliant with SFP28 MSA specifications - 4 independent duplex channels operating at 25Gbps - AC coupled inputs and outputs - 100 Ohm differential impedance - All-metal housing for superior EMI performance - Single power supply 3.3V, low power consumption - RoHS Compliance - Operating temperature range: 0ï?°C to 70ï?°C. Application - 100Gigabit Ethernet - Infiniband EDR - Serial Data Transmission - Networking - Storage - Fiber Channel
Features - Compliant with SFF-8665/SFF-8679 - Compliant with IEEE 802.3bj - 4 independent full-duplex channels - Up to 25.78125 Gbps data rate per channel - Up to 5m transmission - Single 3.3V power supply - Low insertion loss - BER better than 10-15 - Operating temperature: -5~+70â?? - RoHS compliant Applications - 40G/100G Ethernet - Infiniband, QDR/EDR
Features - Compliant with SFF-8431 SFP+ MSA - Compliant with IEEE802.3ae 10G BASE-LW/LR - 1310nm DFB transmitter - PIN photo-detector - 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers - All-metal housing for superior EMI performance - Low power consumption - Advanced firmware allow customer system encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater bandwidth - RoHS Compliant Applications - High-speed storage area networks - Computer cluster cross-connect - Custom high-speed data pipes
Features - Compliant with SFF-8431 SFP+ MSA - Compliant with IEEE802.3ae 10G BASE-SW/SR - 850nm VCSEL transmitter - PIN photo-detector - 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers - All-metal housing for superior EMI performance - Low power consumption - Advanced firmware allow customer system encryption information to be stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater bandwidth - RoHS Compliant Applications - High-speed storage area networks - Computer cluster cross-connect - Custom high-speed data pipes - Inter Rack Connection
The 100G optical transceivers series include different form factors such as QSFP28 and CFP4. Optechâ??s 100G Transceivers includes QSFP28-SR4, QSFP28-LR4, QSFP28-ER4, QSFP28-BIDI, QSFP28-PSM4 and QSFP28-IR4. It offers connecting solution from 100m to 40km for data centers, high speed network and 5G. The name of the 100G QSFP28 comes from the fact that its electrical interface can handle four channels of 25G each, potentially up to 28G. Features - Hot pluggable QSFP28 MSA form factor - Compliant to IEEE 802.3ba 100GBASE-LR4 - Supports 103.1Gb/s aggregate bit rate - Up to 10km reach for G.652 SMF - Single +3.3V power supply - Operating case temperature: 0~70â?? - Transmitter: cooled 4x25Gb/s LAN WDM DFB TOSA (1295.56, 1300.05, 1304.58, 1309.14nm) - Receiver: 4x25Gb/s PIN ROSA - 4x25G electrical interface (OIF CEI-28G-VSR) - Maximum power consumption 4.0W - Duplex LC receptacle - RoHS-6 compliant Applications - 100GBASE-LR4 Ethernet Links - Infiniband QDR and DDR interconnects - Datacenter and Enterprise networking
Optechs 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers. 10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks. Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors. Features - Supports Links up to 30m using Cat 6a/7 Cable - Compliant with IEEE 802.3az - Compliant with SFF-8431 and SFF-8432 MSA - Low Power Consumption (2.5W MAX @ 30m) - Auto-negotiates with other 10GBase-T PHYs - I2C 2-Wire Interface for Serial ID and PHY Register Access - Auto-sense MDI/MDIX - RoHS Compliant - Operating temperature range: 0 C to 70 C Applications - 10 Gigabit Ethernet
Optech 100gbps qsfp28 transceivers are is a high-density, high-speed product solution designed for applications in the telecommunications, data center and networking markets. It supports 4 channels at 25gpbs per channels. Our qsfp28 transceivers have high reliability and performance, which can increase density and optimize your networkings capability. Features - compliant with ieee802.3z - gigabit ethernet standard - compliant with ieee802.3ae 10gbase - compliant with sonet oc-192 sr-1 sdh stm i64.1 - class 1 laser product complies with en 60825-1 - rohs compliant Applications - telecommunications - datacenter - network interface - test and measurement equipment
Data rates : 56G-PAM4/ 25G-NRZ Maximum data rate: 400Gb/s (8 x 50Gb/s) Connector Compliant with QSFP 28 SFF 8665 Low Power Consumption
Qsfp to qsfp cable Qsfp to 4sfp+ cable Sfp to sfp cable Cable length can be made according to your requirement
40g mm 100m qsfp+ optical transceiver Specification Data rate: 40g Channel: 4*10 Distance: 100m Interface: mpo Fiber: mm Ddm: yes Place of origin: made in china Port:shenzhen Features High channel capacity: 40 gbps per module Up to 11.1gbps data rate per channel Maximum link length of 100m links on om3 multimode fiber or 150m links on om4 multimode fiber High reliability 850nm vcsel technology Electrically hot-pluggable Digital diagnostic sff-8436 compliant Case operating temperature range:0°c to 70°c Power dissipation < 1.5 w Standards Compliant to ieee 802.3ba Compliant to sff-8436 Rohs compliant. Working temperature: commercial: 0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Scope of application: switch, ethernet, data center, sdh, sonet, atm Package type: individual package or 10pc/package