Electrical voltage tester Contact ac voltage range: 80v to 500v Long life of neon lamp, turn/off 50000 times or more, flash up to 20000 hours Shell made of transparent plastics, impact-resistant, insulation voltage up to 1000v The end with a hole for hanging up, hardness of blade head up to hrc52 40x26x22.5cm N/g 7.56kg/9.93kg
PSM1500 AC/DC standard meter is a new generation of standard meter produced by hangzhi precision. The product adopts a new software and hardware design, which can simultaneously measure single-phase AC and DC voltage, current, frequency, phase, active power, reactive power, inspecting power, power factor, active energy, and reactive energy etc., at the same time, high-order harmonic distortion (up to 63 harmonics) can be measured. Votlage Measuring Range: DC1000V / AC707V Current Measuring Range & Accuracy: DC1500A @ 0.02% Accuracy, AC1000A @ 0.05% Accuracy PSM1500 AC/DC standard meter can be widely used in metrology research institutes, government inspection agencies and other metrology fields for the metrological verification of single-phase AC and DC voltmeters, ammeters, electric energy meters and power meters.
GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.1or 0.2, used for testing single phase electricity meters error on site. Wide measurement range from 1mA to 120A and 0 to 300V, and also can be used to test alternating current parameters - voltage, current, active power, reactive power, apparent power, harmonics, phase angle, power factor, frequency, energy etc.
Designed to test all types of relays. 6 x 30 a ac/dc 4 x 125 v ac/dc 1x 3 a /100v 1 x 0-265 v aux DC 8 binary inputs 4 binary outputs Rs 232, ethernet port Based on linear power amplifier techmology, the test set is highly accurate and is the economical solution for relay testing. 15 kg
Application GC-7960 Organic Solvent Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets,. Technical Indexes 1.Temperature Control: Oven: room temperature +8~420°C, accuracy ±0.1°C (at 200°C) Injector: room temperature +8~420°C, accuracy ±0.1°C (at 200°C) -
Introduction GF1021 portable single phase energy meter test system used to test single phase energy meter. Adopt mature signal synthetic and power amplifier technology, high precision voltage source and current source output. Widely used in lab and field, and then as single phase standard source. TECHINICAL SPECIFICAITON Accuracy class 0.05%, 0.1% Power supply One Phase AC 85-265V, frequency 50/60Hz. AC Voltage output Range 57.7V, 100V, 220V, 380V; max 500V Adjustment range (0-120)%RG(1) Adjustment fineness 0.01%RG, 0.1%RG, 1%RG, 10%RG as optional. Stability 0.01%/120s Distortion 0.1% (Non-capacitive load) Output load max 30VA Measuring accuracy 0.05%RG AC Current output Range 200mA, 1A, 5A, 20A, 100A; max 120A Adjustment range (0-120)%RG Adjustment fineness 0.01%RG, 0.1%RG, 1%RG, 10%RG as optional. Stability
Function: Microcomputer Vertical Tensile Strength Tester, Computer paper tensile testing machine is widely used in paper, paperboard and other non-metallic materials tensile strength, elongation, tensile energy absorption determination test occasions.
Function: To test the oxygen transmission rate (OTR) of packaging materials, such as plastic film, composite film, coextrusion film, aluminum-plated film, aluminum foil, infusion bag,etc.Widely used in the industries of food, pharmaceuticals, personal care, household, electronics and so on.
Accuracy ¡¨¤¡ê¡§0.1%+50ms¡ê Memory group/test step 50sets/40steps 290mm*100mm*415mm 14kg
Features: * LCD display of 128 64 matrix is used. * Hardness scales(HV ,HB,HRC,HRB,HRA,HS). * RS232 interface and USB to PC * Max 600 groups impact times:32¡«1 of data can be stored at internal. * Back light display has been used to make convenient or the user in poor light. * Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit. * Material of cast steel¡± is added HB values can be read out directly when D/DC impact device is used to measure cast steel¡± workpiece. * Power is two of AA battery. Continuous working period: approx. 100 h (no back light on). * Software of PC can be installed according to the requirements of user. The function will be more powerful to satisfy the more demands of quality control and management.
Roughness tester.
Ft-f1 fogging tester Characteristics: Determines auto's fogging characteristics precisely, guarantees automobiles driving safely. Be applicable for the laboratory and works in low noise. Data test and analysis with professional software, convenient and prompt. Bath temperature controlled by thermostat can be kept constant to 0.1ªc, creating precise testing conditions. Designs friendly and integrally, operates safely and conveniently. World-famous brand elements with stable and reliable performance. The strictly controlled constant thermostat can be used for the other experiments. Conforms to din 75201, iso 6452, sae j1756.
A great scientific innovation must lead to a great technological breakthrough. Tck•w portable rope testers weigh only 1.8 kg, about 1/6~1/25 of the weight of conventional ndt testers. The sensitivity of tck•w sensors could reach 5v/mt, and about 700times higher than conventional sensors. The gap between sensor and wire rope is about 20-30mm which achieves non-contact inspection, it does not affected by grease, normal warped wire, and rope-running speed which shown that passing-through capacity is good. When an inspection is completed, tck•w rope testers are capable to display testing data, flaw graph, data table, and test report on lcd screen. After connected to a computer and printer, a formal test report could be printed, which provides scientific reference for users to use wire ropes more safely and replace wire rope more properly. Key features 1. High inspection precision, strong resolution and stable performance: “weak magnetism sensor” technology invented uniquely by our company, its sensitivity is 700 times higher than traditional tester. The sensor has strong resolution, and can inspect quantitatively actual wire rope flaws under various working status. 2. Small volume and light weight: the weight of w portable flaw detector is less than 2kg, which is only 1/6—1/20 of similar products at home and abroad. 3. Easy operation: inspection system realizes intelligent “fool” operation; on-line lock or unlock only needs 1 second; it only needs one person to operate, and the operation is much easier than using a mobile phone.
leak tester (0- -90KPA) for testing of the leakage of the packaging . meet the astm D3078 standard. we have 3 different chambers 210*270mm 360*585mm 460*330mm.
Test different types of MU in electronic transformer input, magnetic transformer input and electromagnetic transformer input, integrate with reliable analog output and high-speed digital signal process. Support GPS, IRIG-B and PPS timing method, 0.05% high accuracy analog output and strong abnormal SMV function. POM2-3333 can also test SMV accuracy, data process delay, clock synchronization, time accuracy, abnormal SMV and SMV time dispersion,etc items. Functions: Background software can do programming of the electrical wiring graph and configuration and fault simulation of protection relays, analog the setting of specifications of MU, digital terminal devices and specifications setting of fault and fault points. The entire testing and operation process can be controlled by the background software. Two kinds of test modes ensure absolute time delay parameters of MU and complete the SMV response time test accurately. The timing function makes tests on MU's clock synchronization and time accuracy, etc time characteristics. SMV analysis analyzes SMV and GOOSE messages output by MU in real-time. It tests the MU's self-checking and fault process by SMV quality bit, signal remark in GOOSE or the defined warning information in GOOSE. The electric quantity in SMV can display the wave, binary status and previous displacement time. The SMV and GOOSE abnormal output by MU can be judged and analyzed by multi abnormal SMV detection systems. The accurate timing remark on SMV can statistic and evaluate the time dispersion of MU's SMV.
Test different types of MU in electronic transformer input, magnetic transformer input and electromagnetic transformer input, integrate with reliable analog output and high-speed digital signal process. Support GPS, IRIG-B and PPS timing method, 0.05% high accuracy analog output and strong abnormal SMV function. POM2-3333 can also test SMV accuracy, data process delay, clock synchronization, time accuracy, abnormal SMV and SMV time dispersion,etc items. Functions: Background software can do programming of the electrical wiring graph and configuration and fault simulation of protection relays, analog the setting of specifications of MU, digital terminal devices and specifications setting of fault and fault points. The entire testing and operation process can be controlled by the background software. Two kinds of test modes ensure absolute time delay parameters of MU and complete the SMV response time test accurately. The timing function makes tests on MU's clock synchronization and time accuracy, etc time characteristics. SMV analysis analyzes SMV and GOOSE messages output by MU in real-time. It tests the MU's self-checking and fault process by SMV quality bit, signal remark in GOOSE or the defined warning information in GOOSE. The electric quantity in SMV can display the wave, binary status and previous displacement time. The SMV and GOOSE abnormal output by MU can be judged and analyzed by multi abnormal SMV detection systems. The accurate timing remark on SMV can statistic and evaluate the time dispersion of MU's SMV.
Application GC-7960 Ethylene Oxide Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets as well as various kinds of sterilization apparatus and instruments. Standards YBB20162012ã?�YBB20172012ã?�YBB20182012ã?�YBB20252012ã?�YBB20262012ã?�YBB20272012 -
Application OTR-1901 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results. Technical indexes Test range� Film: 0.01-6500 cm3/m2·d (Standard) 0.07-6,5000 cm3/m2·d (Optional) -
GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials.
Application GTR-7001 is based on the differential pressure method, and is professionally applicable to the determination of gas transmission rate as well as solubility coefficient, diffusion coefficient and permeability coefficient of plastic films, laminated films, high barrier materials, sheeting, metal foils, rubber, tires and permeable membranes. Features Vacuum differential pressure method Patent technology 3 specimens test simultaneously and independently Computer control One-button test, test automatically through whole process High accuracy vacuum sensors embedded in 3 Chambers with independent temperature sensor Test under various RH conditions with Humidity generator (optional) Environment temperature and humidity sensor inside Permeability coefficient ,solubility coefficient and diffusion coefficient test Chambers with water bath temperature control technology Unit based on embedded system,24bit AD Multiple test modes optional Data curves display Traceable reference film calibration Supports DSM system (DSM, lab data management system) Technical Indexes Test range: 0.01 - 190,000 cm3/m2�24h�0.1MPa (Standard) Resolution: 0.001cm3/m2�24h�0.1MPa Samples: 3, independent Vacuum accuracy: 0.1Pa Temperature range: 5C - 95C Temperature accuracy: ±0.1C Humidity range: 0%RH,35%RH-90%RH,100%RH (optional) Humidity accuracy: ±1%RH (optional) Sample thickness: less 5mm Sample size: >= 150mm * 94mm Test area: 48cm2 Test gas: O2, N2, CO2, He, etc Differential pressure: -0.1MPa - 0.1MPa Gas interface: Ф8mm Dimension: 730mm * 510mm * 350mm Power supply: AC 220V 50Hz Net wt. : 63kg Standards ASTM D1434, ISO 15105-1,ISO 2556,GB/T 1038-2000,JIS 7126-1,YBB 00082003 Configuration Delivery: Main unit, computer, G-TRANS software, Temperature controller, vacuum pump(BOC Edwards), tank regulator, PCIE card, communication cable, sample cutter, vacuum grease. Optional: Humidity generator, Reference film, vacuum grease, sample cutter, DSM system.
