1. Applications of XYX-130 wheeled hydraulic core drilling rig Geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes, direct grouting, civil water well and ground temperature central air conditioners. 2.Features of XYX-130 wheeled hydraulic core drilling rig The drilling rig is equipped with wheeled walking mechanism, which is convenient for the whole machine to move. Also, because of the oil pressure feeding mechanism, the rig improves drilling efficiency. The drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient, safe and reliable. The drilling rig is equipped with pressure gauge so the operatpr will know the bottom hole condition during drilling process. 3.Technical parameters of XYX-130 wheeled hydraulic core drilling rig XYX-130 wheeled hydraulic core drilling rig Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm Drilling rod diameter 50mm Drilling angle 90°-75° Drill weight 950kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Windlass Maximum lifting weight of single rope 1600kg Single rope lifting speed 0.41 0.82 1.64m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 27m Mud pump Type Horizontal single cylinder double action Displacement diesel engine / motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm
1. Applications of XYX-130 wheeled hydraulic core drilling rig Geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes, direct grouting, civil water well and ground temperature central air conditioners. 2.Features of XYX-130 wheeled hydraulic core drilling rig The drilling rig is equipped with wheeled walking mechanism, which is convenient for the whole machine to move. Also, because of the oil pressure feeding mechanism, the rig improves drilling efficiency. The drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient, safe and reliable. The drilling rig is equipped with pressure gauge so the operatpr will know the bottom hole condition during drilling process. 3.Technical parameters of XYX-130 wheeled hydraulic core drilling rig XYX-130 wheeled hydraulic core drilling rig Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm Drilling rod diameter 50mm Drilling angle 90°-75° Drill weight 950kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Windlass Maximum lifting weight of single rope 1600kg Single rope lifting speed 0.41 0.82 1.64m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 27m Mud pump Type Horizontal single cylinder double action Displacement diesel engine / motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm
1. Characteristics of XYX-44A wheeled hydraulic water well drilling rig XY-44A is wheeled water well drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster water well drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition. 2. Applications of XYX-44A wheeled hydraulic water well drilling rig ·Water well drilling, ·engineering geology exploration, ·hydrology and water well drilling ·large diameter foundation piles construction 3.Parameters of XYX-44A wheeled hydraulic water well drilling rig XYX-44A wheeled hydraulic water well drilling rig Drilling depth 600-1400m Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60mm Drilling angle 90-65 Drill rig moving stroke 450mm Spindle Spindle speed ( Diesel Engine) Forward 60 97 169 187 276 301 284 487 521 847 1180 1490r/min Reverse 65 201r/min Spindle speed ( Electric Motor) Forward 50 81 141 155 230 251 320 406 434 706 984 1247r/min Reverse 54 167r/min Spindle stroke 600mm Spindle max. pressure force 90kn Spindle inner diameter 96mm Lifting capacity 120kn Main hoist Max.single line lifting capacity 45kn Max.single line lifting speed 0-45m/s Wire rope caliber 17.5-18.5mm Hoist capacity of wire line 90-110m Roller diameter 140mm Wirerope diameter 6mm Wire rope length 450m Mud pump Type BW-250 Displacement 250 l/min Work pressure 80kg/cm² Water inlet pipe diameter 75 mm Water outlet pipe diameter 50 mm Power Diesel engine YC4E135-181KW Electric motor Y225S-4 37KW
STYLE - 1/1 length - waistband made of 3 col. y/d 1x1 rib with elastane with elastic band inside - turn up at leg opening, fixed at seams - 2 color coated and embossed metal eyelets at wb front - herringbone string with folded ends matching to body color, fixed in cb, visible length not longer than 13 cm - fake fly with contrast bartacks - 2 rounded pockets with 1 embossed metal rivet at each pocket - small patch pocket on left thigh with contrast bartacks - selffabric knee inserts with 1 darts (only on outseam) - backsaddle - 2 back patch pockets with contrast bartacks WORKMANSHIP - single stitching at wb, fake fly, inseams, sideseam and darts - double stitching at pockets, rise, backsaddle and knee inserts DETAILS - 2 metal rivets, embossed (9mm) - 1 col. herringbone strings (12mm) - 1 col. h/y top stitching matching to body color - bartacks in contrast color - 2 col. s/j appliqu�© with 1 col. embroidery over front pocket opening - 1 col. embroidery at front patch pocket (shell: 57% cotton, 42% polyester, 1% elastane, knitted, denim (blue), 320 g/m�²/ 9.5 Oz after washing, heavy stone washed, not ironed, only steamed rib: 95% cotton , 5% elastane, 1x1 rib, y/d, 350gsm, knitted (proper rib) ( Weight after wash 320 g/m�²)
Application Doypack filling and sealing machine is suitable for packing solid,grain, powder, liquid and thick liquid. Bag Type Doypack packaging machine is suitable for Standup bag. Main Features The main Features of premade doypack packaging machine are as follows: 1. 8 pairs bag clamps Auto-adjust by PLC, more precise and more convenient. 2. Packing efficient:do not filling if there is no bag openedï¼?Do not sealing if the bags without materials; Do not output the empty bags so it is very efficient. 3. High Automation: Complete all actions by grooved clamp,which is more durable than end cam, and it do not need springs to return,more stable in running. 4. Perfect Prevention System: when the bag is not open or not opened enough, it will be non-filling and non-sealing, so the empty bags return to the first station to refill and not wasted and it will save the production cost. Station Process 1. Bag Feeding 2. Date Coding 3. Bag Opening 4. Filling 5. Filling 6. Standby 7. Heat Sealing 8. Forming & Output Main Technical Parameters Equipment Model RZ8-200D Bag Size W:70~200mm L:100~300mm Filling Range 5~1500g Packing Speed 20~50 Bags/min Weight 1200kg Dimension 1570mm*1440mm*1480mm(L,W,H) Total power 3kw
Application Doypack filling and sealing machine is suitable for packing solid,Website:http://www.cnunionpack.com,grain, powder, liquid and thick liquid. Bag Type Doypack packaging machine is suitable for Standup bag. Main Features The main Features of premade doypack packaging machine are as follows: 1. 8 pairs bag clamps Auto-adjust by PLC, more precise and more convenient. 2. Packing efficient:do not filling if there is no bag openedï¼?Do not sealing if the bags without materials; Do not output the empty bags so it is very efficient. 3. High Automation: Complete all actions by grooved clamp,which is more durable than end cam, and it do not need springs to return,more stable in running. 4. Perfect Prevention System: when the bag is not open or not opened enough, it will be non-filling and non-sealing, so the empty bags return to the first station to refill and not wasted and it will save the production cost. Station Process 1. Bag Feeding 2. Date Coding 3. Bag Opening 4. Filling 5. Filling 6. Standby 7. Heat Sealing 8. Forming & Output Main Technical Parameters Equipment Model RZ8-200D Bag Size W:70~200mm L:100~300mm Filling Range 5~1500g Packing Speed 20~50 Bags/min Weight 1200kg Dimension 1570mm*1440mm*1480mm(L,W,H) Total power 3kw
1.Brief introductions of YQZ-30 hydraulic core drilling rig YQZ-30 hydraulic core drilling rig is a small portable diesel oil drilling machine. It is mainly used for prospecting and exploration, geophysical exploration,drilling engineering such as road construction and blasting hole, shallow oil, natural gas and groundwater drilling. It also can be used for engineering drilling of dam grouting and tunnel ventilation and drainage. The drilling depth of YQZ-30 hydraulic core drilling rig is 30 meters. The open hole diameter is 89mm, and the final hole diameter is 75mm. 2.Features of YQZ-30 hydraulic core drilling rig ·Oil pressure automatic feeding mechanism, high drilling efficiency. ·Using the upper ball clamp mechanism, non-stop re-chuck ·Handles are centralized, easy to operate, safe and reliable. ·Compact structure, small floor space. ·The shell of drill rig and gearbox are made of aluminum. The shell reduce the weight of the fuselage. · Easy to decomposition and move, suitable for working in hilly terrain, mountainous areas and other complex terrain. 3. Technical parameters of YQZ-30 hydraulic core drilling rig Main engine Drilling depth 30m Drill pipe diameter 42mm Open hole diameter 91-110mm End hole diameter 75 mm Drilling rig weight 198kg(No power) Drilling rig dimension 1400*600*1055mm Windlass Maximum hoist capacity 4kn Coiling block diameter 90mm Wire rope diameter 8mm Maximum length 18m The band type brake diameter 200mm The band type brake width 35mm Vertical shaft Rotating speed 136/338/578r/min Stroke 400mm Maximum pressure 8kn Lifting power 10kn Oil pump Model YBC20/125 Rated pressure 12.5Mpa Rate of flow 20ml/r Rated rotate speed 1500r/min Power Diesel engine R180 Cooling type water-cooling Rated power 5.67KW Rated rotate speed 2600r/min 4.Configuration list of YQZ-30 hydraulic core drilling rig Item Specification Unit Quantity Hydraulic core drilling rig YQZ-30 Platform 1 Drill pipe including joint 42 m 30 Reducing nipple joint 57/57 pc 2 Reducing nipple 89*57 pc 1 Opening pipe 89 pc 1 Alloy bit 91 pc 1 Reducing nipple 73 pc 1 Core barrel 73 pc 1 Diamond bit 75 pc 1 Water pump diesel engine power set 1 Drill tower 3m set 1 Wire rope 10mm m 20 Rope cappel pc 4 U shape ring pc 1 Flat square main rod 2m/pc pc 1 Reducing nipple for main rod pc 1 Water faucet pc 1 Lifter pc 1 U-fork 57 pc 1 Safety clamp 57 pc 1 Pliers 24 pc 1 L-wrench 73/89 pc 2
1.Brief introductions of YQZ-30 hydraulic core drilling rig YQZ-30 hydraulic core drilling rig is a small portable diesel oil drilling machine. It is mainly used for prospecting and exploration, geophysical exploration,drilling engineering such as road construction and blasting hole, shallow oil, natural gas and groundwater drilling. It also can be used for engineering drilling of dam grouting and tunnel ventilation and drainage. The drilling depth of YQZ-30 hydraulic core drilling rig is 30 meters. The open hole diameter is 89mm, and the final hole diameter is 75mm. 2.Features of YQZ-30 hydraulic core drilling rig ·Oil pressure automatic feeding mechanism, high drilling efficiency. ·Using the upper ball clamp mechanism, non-stop re-chuck ·Handles are centralized, easy to operate, safe and reliable. ·Compact structure, small floor space. ·The shell of drill rig and gearbox are made of aluminum. The shell reduce the weight of the fuselage. · Easy to decomposition and move, suitable for working in hilly terrain, mountainous areas and other complex terrain. 3. Technical parameters of YQZ-30 hydraulic core drilling rig Main engine Drilling depth 30m Drill pipe diameter 42mm Open hole diameter 91-110mm End hole diameter 75 mm Drilling rig weight 198kg(No power) Drilling rig dimension 1400*600*1055mm Windlass Maximum hoist capacity 4kn Coiling block diameter 90mm Wire rope diameter 8mm Maximum length 18m The band type brake diameter 200mm The band type brake width 35mm Vertical shaft Rotating speed 136/338/578r/min Stroke 400mm Maximum pressure 8kn Lifting power 10kn Oil pump Model YBC20/125 Rated pressure 12.5Mpa Rate of flow 20ml/r Rated rotate speed 1500r/min Power Diesel engine R180 Cooling type water-cooling Rated power 5.67KW Rated rotate speed 2600r/min 4.Configuration list of YQZ-30 hydraulic core drilling rig Item Specification Unit Quantity Hydraulic core drilling rig YQZ-30 Platform 1 Drill pipe including joint 42 m 30 Reducing nipple joint 57/57 pc 2 Reducing nipple 89*57 pc 1 Opening pipe 89 pc 1 Alloy bit 91 pc 1 Reducing nipple 73 pc 1 Core barrel 73 pc 1 Diamond bit 75 pc 1 Water pump diesel engine power set 1 Drill tower 3m set 1 Wire rope 10mm m 20 Rope cappel pc 4 U shape ring pc 1 Flat square main rod 2m/pc pc 1 Reducing nipple for main rod pc 1 Water faucet pc 1 Lifter pc 1 U-fork 57 pc 1 Safety clamp 57 pc 1 Pliers 24 pc 1 L-wrench 73/89 pc 2
Qucik detail Place of Origin Zhejiang, China Brand Name CROP Model Number Fiber optic drop cable clamp Product name Fiber optic drop cable clamp anchoring clamp Sample Free Material Aluminum,Copper Installation Quick Certifications ISO9001 OEM Acceptable Export All over the world Business Type Manufacturer Description of Dead End Clamp for ADSS conductor The Dead End Clamp for ADSS conductor is designed to anchor insulated service lines with 2 or 4 conductors to the pole or wall. The ADSS tension clamp is composed of a body, wedges and removable and adjustable bail or pad.The PA series Anchor clamps are design to supporting the neutral messenger,the wedge can be self-adjusting. Pilot wires or street lighting conductor are led alongside the clamp. The self opening is featured by an integrate spring facilities for easily insert the conductor into the clamp. Standard: NFC 33-042. Material of ADSS tension clamp The ADSS tension clamp body, the main mechanical component is manufactured in heavy duty weatherproof synthetic material. The wedge, made from synthetic material exerts necessary mechanical pressure in retaining the cable in the body of the clamp. The pull hook is made from anti corrosion rod. For anchoring isolated coaxial and unipolar cables. Feature of PA series Anchor clamps 1.Simple and fast installation requiring no tools. 2.Suits to all field configurations. 3.Possible to mount on pole line hardware with open or closed eye. 4.Mechanical traction resistant. 5.Supports industrial duty tension. 6.Corrosion resistant. 7.Weatherproof. For the correct installing PA1500 dead end clamp, the following steps are recommended: Loosen the mooring hook from the anchor clamp. Place the hook en the place to be mooring point or support, fixing it inside the body of the clamp Remove the wedge from its base and then place the cable within the clamp. Replace the wedge to its corresponding position and proceed to tense the cable taut. Models AC-PA69-ADSS AC-PA1500-ADSS AC-PA2000-ADSS Cable diameter(mm) 5~ 9 8 ~ 12 12-15 Core No. 1 1 1 MBL(daN) 600 (800) 1000(1500) 1500(2000) (*)Add FA mean steel rope, add mean stainless steel rope
KC500/KIMTECH Gloves Offer & SOP Kimberly-ClarkTM is introducing changes to their Exam Gloves sold in North America: Kimberly-ClarkTM Brand to KimtechTM Brand Addition of UDI compliant labels Product: KimtechTM purple nitrile gloves Size: 10% S / 40% M / 40% L / 10% XL Seller: KimtechTM allocation holder Origin: Malaysia Price FOB Malaysia: $9.80/box (100 ct.) Commissions not included. $0.10 cents maximum markup allowed to the buyer side. MOQ: 5 million boxes x 12 months SOP: 1. NCNDA End buyer and end seller will sign 2. ICPO from buyer addressed to seller 3. SPA issued by Seller 4. Buyer signs SPA and provide draft LC language from tier 1 bank 5. Seller provides diligence documentation showing allocation 6. One-month SBLC or revolving LC to be opened as security for duration of 12-month contract (will be used as last month payment) 7. Payment terms see below 8. Delivery of 5mil boxes per month as per factory schedule 9. Repeat 7 and 8 each month PAYMENT TERMS - OPTION 1 1. After diligence completed to buyer's reasonable satisfaction, Buyer sends via TT payment for first month of delivery 2. Once goods delivered for that month, Buyer sends via TT payment for next month 3. To be repeated each month 4. Last month paid using security deposit PAYMENT TERMS - OPTION 2 1. After diligence completed to buyer's reasonable satisfaction, Buyer opens irrevocable transferable revolving LC for 2 months supply. 2. LC is replenished each month after goods for that month delivered for one additional month 3. To be repeated each month 4. Last month paid using security deposit
Our company Ornament Instruments is manufacture and export all kinds of Body Piercing Tools & Tattoo Grips and Tips in Sialkot Pakistan. Piercing Tools Categories are: Pliers (Ring Opening Pliers, Small Ring Closing Pliers, Large Ring Closing Pliers, Heavy Duty Cobalt Ring Opening Pliers, Bioplast Threading Pliers) Forceps (Pennington Forceps Slotted & Non-Slotted, Mini Pennington Forceps Slotted & Non-Slotted, Sponge Forceps Slotted & Non-Slotted, Mini Sponge Forceps Slotted & Non-Slotted, Kelly Forceps, Multi-Purpose Combo Forceps, Reverse Pennington Forceps, Septum Forceps Style # 3, Septum Forceps Style # 2, Septum Forceps Style # 1, Bucket End Tragus Forceps, Tunnel Septum Forceps, Straight Line Septum Forceps, Needle Holder Forceps, Dermal Anchor Holding Forceps, Dermal Anchor Kelly Forceps, 1.6MM Hole, Dermal Anchor Kelly Forceps, 1.2mm Hole, Ring Forceps, Dermal Anchor Locking Hemostat Forceps, Dermal Anchor Forceps With Notched Tip, Skin Drive Holding Forceps, Dermal Anchor Holding Forceps, Dermal Anchor Locating Pliers etc) Bead Holders, Tweezers Scissors (Both End Sharp Dressing Scissors, Blunt and Sharp End Dressing Scissors, Both Blunt End Dressing Scissors, Iris Scissors, Stitch Scissors, Bandage Scissors) Dermal Anchor Tools (Dermal Anchor Internal Screw Holder, PTFE and Bioplast Threading Tool, 1.2mm & 1.6mm) Receiving Tubes & Insertion Pins (Receiving Tube Straight, Receiving Tube Flared, Receiving Tube 45 Degree Angle, Receiving Tube 35 Degree Angle, Piercing Insertion Pins, Insertion Pins Sets) Measuring Tools, Piercing Tools Kits, Instruments Trays & Scalpels
Supercapacitor test separator 1 Applicable range: suitable for diameter 4 22mm, aluminum shell length 8 ~ 40mm, test voltage from 0V ~ 5VDC. 2ã?? Test item: ESR (1kHz) fixed current pulse charging 60s charging voltage. Three. Test process: the farad capacitor is fed through the vibrating material tray, and then transferred to the test conveying chain through the flat feeding and the hand over feeding of the manipulator. First, the guide pin is shaped; then, the polarity is tested, and the stepping motor is automatically reversed. After the second foot trimming, the products whose voltage at the test capacitor end is greater than 20mV are put into the retest material box, and the equivalent series resistance ESR (frequency 1kHz, apply 1mA or 10mA current, check Measure the voltage at the end of the capacitor, record the ESR grading range (high ESR, low ESR) of the measured capacitance with the internal resistance test instrument, directly discharge the ESR defect, then detect the open circuit and short circuit, enter the open circuit and short circuit material box, set the constant current charging current I of the capacitor, and pulse the farad capacitor on the test chain for 60s 0.1s, Carry out the voltage test at the end of the capacitor; unqualified voltage products enter into the poor voltage material box; Classification of qualified products (1) High voltage & high ESR (2) High voltage & low ESR (3) Low voltage & high ESR (4) Low voltage & low ESR, unqualified gear is divided into two gears, (5) Open circuit (6) Short circuit, 6 gears in total, then enter the load discharge and short circuit discharge section, six kinds of which are put into the corresponding material box respectively. 4 Performance 1. Single phase AC220V power supply of vibrating plate feeding system, 50 / 60Hz 1. Open circuit short circuit detection power supply DC 0v-5v 10A 1. 60s charging voltage detection single channel constant current setting range: 0.01a-5a can be set, accuracy < 1%; charging time: 60s ± 0.1s; display setting value; voltage test accuracy: display value ± 1%; 1. ESR test range: 0.0001 - 999.99m ; automatic shift from upper limit of setting value m , , K, M; display mode: LCD display precision: display value 1%; setting mode: it can set the range of gear and display the set value.
5#metal zipper: Open-end+auto lock 1: brass open-end 50cm 2: 50pcs/PE 3: We can customize various zippers for clients. The price and quality are very competitive.
5# metal zipper O/E 30cm 1: brass open-end zipper 2: auto lock 3: 100pcs/PE , 500pcs-1000pcs/ctn Any size and color can be customized for clients.
5# aluminum open-end zipper 1: size: 50cm + auto lock 2: 100pcs/pe ( various color ) 3: Any size can be customized for customers.
We Offer Used Rails Second Quality R50 R65 made and delivered from Saudi Arabia - Length cut to : 1.2 m â?? 1.5 M. - Our Special Price Offer below International Market Price is : US$:240/ MT CIF Sea Ports in Asia and in Europe & United States a Minimum Order of 100,000 MT Per Month X 12 Month Contract = 1.2 Million Tons No smaller Quantity is possible Sir . - Origin: Saudi Arabia - Delivery Terms: CIF ASWP - Destination: All Safe Sea Ports in Asia & in Europe. - Packing: Bulk and in Bundles. - Delivery Time Starts : 14 Days after L /C is Opened - with 20% P B and Payment is at Destination / Unloading Sea Port. - Payment Terms: NON - Transferable LC MT 700 from a High Rated Top Prime - with 20% P B and Payment is at Destination / Unloading Sea Port. - Payment Terms: NON - Transferable LC MT 700 from a High Rated Top Prime Bank The Procedure is very Simple :---------- 1) First Exit / End Buyer Provides his LOI on his Company Letterhead Signed & Stamped.& get FCO 2) Buyer Opens a Transferable L / C from a High Rated Top Prime Bank and shipment Starts. 3) Seller Provides 20% P B and Payment is at Destination Port. Procedure is very Simple . 1) First Exit / End Buyer Provides his LOI on his Company Letterhead Signed & Stamped.& get FCO 2) Buyer has to Open Pre - Advised LC MT 705 and after that Buyer will be invited to Saudi Arabia to inspect Used Rail Stocks and get Fresh " SGS Inspection Report" from Seller . for the next 12 Months. Within next 15 Days MT 705 will be Converted into LC MT 700 3) Buyer Opens a NON - Transferable L / C MT 700 from a High Rated Top Prime Bank and shipment Starts. 4)Seller Provides 20% P B and Payment is at Destination Port. 5) End Buyer must Transfer a " Refundable Deposit of $:1334 " to get his Price Locked for the next 10 Months. Within next 15 Days MT 705 will be Converted into LC MT 700 and $:1334 will be sent back to End Buyer.
1.Aluminum housing with special electrophoresis processing, anti-oxidation surface is more wearable and durable. 2.Integrated and fully sealed structure and external circuit design, improves waterproof ability and installation efficiency. 3.Anti-tamper switch opens and triggers alarm if power cut off or end-cap removed. 4.Two different frequency channels, avoiding interference caused by adjacent rays. 5.Intelligent fuzzy analysis technology adopted to improve response speed and stablity. 6.Buzzer indication for well alignment. 7.Alarm method: any two adjacent beams breaks, helpful for preventing false alarms triggered by small animals and birds. 8.Adjustable response sensitivity. 9.Designed and recommended for protection of doors and windows. 10.High immunity to sunlight, rain, frost, fog, snow etc. ModelAbi10-482Abi30-482Abi60-482Abi100-482Abi10-764Abi30-764Abi60-764Abi100-764 Outdoor range10m30m60m100m 10m30m60m100m Height48cm76cm Beams24 ModelAbi10-1086Abi30-1086Abi60-1086Abi100-1086Abi10-1408Abi30-1408Abi60-1408Abi100-1408 Outdoor range10m30m60m100m 10m30m60m100m Height108cm140cm Beams68 ModelAbi10-17210Abi30-17210Abi60-17210Abi100-17210Abi10-20412Abi30-20412Abi60-20412Abi100-20412 Outdoor range10m30m60m100m 10m30m60m100m Height172cm204cm Beams1012 Detection methodSimultaneous interruption of adjacent 2 infrared beams Beam frequency2 channel ( a and b ) Power supplyDc11~18v Current consumption50~90ma max Response speed40msec Alarm outputSwitch ouput signal, no, nc optional Tamper switchNc, opens when cover removed Operating temperature -25â?? to +55â?? Environment humidity95% max Alignment angleHorizontal 180â°(â±90â°), vertical unadjustable Protection degreeIp65 MaterialPc engineering plastic, aluminum housing
Product description: HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
roduct description: HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
Product description: HP-250A Full automatic self-self pocket envelope making machine is suitable for producing self-seal small pocket envelope (open-end envelope). This two-in-one machine includes folding pocket envelope and gumming open-end envelope with self-seal glue on the flap inline. 1. Reliable sheet separation 2. No-stop feeder 3. Easy regulation and paper positioning, accurate paper positioning 4. Ensuring under high speeds. 5. High quality electronic parts. 6. High Production efficiency. 7. Operator Friendly. Technical parameter: Model HP-250A Paper weight 60 - 200 g/m² Output per hour 5000 - 18000 pieces Size ranges envelopes mm 40x70 - 120x250 inch 1.57x2.75 - 4.72x9.84 Connected load 7.75kw Weight 1300kg Dimensions 5100x850x1100mm Process sketch map: Our advantage: 1. The TOP professional manufacturer in china. 2. 24 hours service hotline, solve customers problem. 3. High cost-effective 4. After-sale service: timely and considerate Sample show: Picture in stock: Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free. The client should pay for the cost following: 1.Visa fee 2.Air ticket 3.Diet 4.Accommodation 5.Labor fee:50 USD/day (within guarantee time) 100 USD/day (without guarantee time) NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
