Main characteristics of amorphous core winding machine 1. The winding machine is made of unidirectional winding, automatic cutting and automatic welding, 2. The continuous feeding of the winding machine adopts constant tension control to ensure the product tightness, size consistency and adjustable tension. 3. The feeding trough of this machine guides and corrects the feeding. Easy adjustment, wide width range 4. The unique design of the cutter is made of special steel, which will not cut cracks. It is durable and maintenance free for life 5. Good consistency of welding machine, adjustable current, suitable for welding of various materials, good stability 6. The mechanical winding adopts Siemens Servo motor to drive the winding needle through the synchronous belt, which is more accurate, reliable and fast than that of the traditional mechanism driven by the auxiliary structure such as motor, so as to ensure that the size and number of turns of amorphous tape are consistent, and the quality is effectively improved. 7. This machine adopts photoelectric control, so that the positioning is accurate, the operation is more stable and reliable, the winding productivity of the machine is improved, and the failure rate is reduced. Technical parameters: Inner diameter of iron core: 2-45mm Outer diameter of iron core: 3-60mm Core height: 3-25mm Power supply: AC220 V, 50 Hz Power: 1.2kW Note: those not in the above scope can be customized according to customer requirements.
1 Purpose This series of separator is specially designed for the electrical performance test and sorting of large-size magnetic ring, which replaces the current manual separation, effectively prevents the phenomenon of artificial wrong separation, and greatly improves the production efficiency of the equipment. 2ã?? How it works The machine is mainly composed of feeding mechanism, testing mechanism, sorting mechanism and electrical control mechanism. First, the magnetic ring is manually poured into the hopper, and then the flow of the magnetic ring is controlled by the photoelectric control device, The magnetic ring falls into the swash plate and is sent down through the operation of the swash plate device to fall into the test mechanism, The magnetic ring is tested, the test results are input into PLC, and the sorting mechanism is driven after processing, The magnetic ring is put into the warehouse by grades to realize automatic sorting. 3 Main features This machine has strong versatility. By properly adjusting some parts, the magnetic rings of different specifications can be tested and sorted. The key actions are coordinated and controlled by photoelectric signal through PLC, which is easy to operate, stable and reliable. 4ã?? Main technical parameters Sorting speed: silicon steel core can be adjusted in the range of 4-100 pieces / min, magnetic ring can be adjusted in the range of 100-150 pieces / min, and amorphous iron core can be adjusted at 50-70 pieces / min. Sorting magnetic ring specification: diameter 10-22mm, thickness 7-13mm. The outer diameter of silicon steel core is 15-45mm, and the height is 5-13mm. Sorting number: 5 / 9 (optional) The test error is less than �± 1% (depending on the accuracy of the selected test instrument). Power supply: AC220V 3000W Body dimensions: 2250 x 1150 x 1700 (LxWxH) Total weight: about 220kg
1 Main features 1. The winding machine is made of unidirectional winding, automatic cutting and automatic welding, 2. The continuous feeding of the winding machine adopts constant tension control to ensure the product tightness, size consistency and adjustable tension. 3. The feeding trough of this machine guides and corrects the feeding. Easy adjustment, wide width range 4. The unique design of the cutter is made of special steel, which will not cut cracks. It is durable and maintenance free for life 5. Good consistency of welding machine, adjustable current, suitable for welding of various materials, good stability 6. The mechanical winding adopts Siemens Servo motor to drive the winding needle through the synchronous belt, which is more accurate, reliable and fast than that of the traditional mechanism driven by the auxiliary structure such as motor, so as to ensure that the size and number of turns of amorphous tape are consistent, and the quality is effectively improved. 7. This machine adopts photoelectric control, so that the positioning is accurate, the operation is more stable and reliable, the winding productivity of the machine is improved, and the failure rate is reduced. 2ã?? Technical parameters Application: used for producing permalloy iron core, suitable for winding ring, square, rectangular, C-shaped transformer core. 2. Die diameter: 6-80mm Maximum outer diameter of winding: 50-100 mm Steel sheet width: 5-50mm Thickness of steel sheet: 0.15-0.6mm Alignment accuracy of both sides of iron core: < 0.2mm Power supply: AC220V 50 / 60Hz Air source: 8kgf / cm Equipment weight: about 650kg Note: the iron core specification depends on the model, which can be customized according to customer requirements.
Product Brief The winding equipment is widely used in the winding of silicon steel core. This equipment is suitable for winding circular, square, C-shaped, rectangular and other silicon steel cores. The whole process of machine production is controlled by computer, and the whole process of feeding, bucking, topping, winding, cutting and welding is monitored in a closed-loop way, which is fast, efficient, stable and does not require special personnel to watch. Main characteristics 1. Automatic feeding, clamping and hooking, winding, cutting and punching, welding and receiving the core with high speed and efficiency. 2. PLC system and HMI touch screen to control servo motors, moving parts and pneumatic components . 3. Continuous feeding, adjustable tension, accurate counting, closed-loop monitoring, automatic alarm. 4. Equipped with laser welder.Automatic laser welding with perfect welding spot, and pick up cores by machine hand. 5. Winding Core: ID=�¦8-40mm, OD Max=�¦50mmï¼?Height=6-25mm. technical parameter Inner diameter of iron core: 8-260mm Outer diameter of iron core: 50-300 mm Steel sheet thickness: 350.18 mm Steel sheet width: 5-120mm Alignment accuracy of both sides of iron core: 0.2mm Power supply: AC220V / AC380V (actual model)
1 Product introduction: 1. Suitable for 186502560 cylindrical lithium-ion battery production. 2. It adopts the structure of single winding needle drawing on both sides, and the two sides of the winding needle drive the winding needle synchronously. 3. Manual lead-in of pole piece, automatic winding, automatic needle change, automatic sticking of termination tape and automatic blanking. 4. Active unwinding of two coils of diaphragm with continuous adjustable tension. 5. The software can realize advanced positive plate, advanced negative plate, positive and negative plates entering at the same time, and the parameter setting is simple. 6. The winding speed changes smoothly and the core tension is consistent. Product Name: multi specification, cylindrical, power battery lithium battery semi-automatic single needle winding machine Cell specification: diameter 8mm; height: 25 ~ 55mm (depending on the model and specification, it can be customized according to customer requirements) Winding mode: single winding needle, synchronous needle drawing on both sides Pasting method: vertical Length of electrode lug: the electrode lug extends out on both sides of the battery, the extension length of negative electrode is less than 25 mm, and that of positive electrode is less than 10 mm
1 Product introduction 1. Semi automatic mask welding ear belt machine is an important part of mask production line. The ear band welding machine is a high-speed ear band welding machine specially designed for mask rubber. It is easy to operate, can operate continuously at high speed, and has high production efficiency. It is suitable for ear band welding of disposable plane mask and N95 mask. 2. Ultrasonic welding, continuous and stable work. Production, durable. 3. The cylinder is made of taiwanyadeke cylinder with reliable quality. 2 Product parameters Purpose: used for ear band welding of disposable face mask, N95 mask, activated carbon mask and other masks. Size: 1300mm x 600mm x 1200mm (subject to actual condition) Welding type: Ultrasonic Capacity: about 2-5 seconds / piece Power supply: AC220 V, 50 Hz Air pressure: 8 kgf / cm Power: 1 kW Operating temperature: - 30 â?? to 80 â?? Weight: About 50kg
1 Product introduction 1. Kn95 mask edge banding machine is an important part of kn95 mask semi-automatic production line. It is easy to operate and can operate continuously with high production efficiency. It is suitable for edge sealing of kn95, N95 and other masks. 2. Ultrasonic welding, continuous and stable work. Efficient production, durable. 3. The cylinder is made of Taiwan Adec cylinder, with reliable quality. 2 Product parameters Application: for N95 mask, kn95 mask, activated carbon mask and other masks edge sealing. Size: 1300mm x 600mm x 1200mm (subject to actual condition) Welding type: Ultrasonic Capacity: about 2-5 seconds / piece Power supply: AC220 V, 50 Hz Air pressure: 8 kgf / cm Power: 1 kW Operating temperature: - 30 to 80 Weight: About 50kg
We are a supplier of used and new Heidelberg printing machine, parts and consumables globally , we acknowledge the demand of offset products and we want to fill that gap by bringing to the world the best affordable quality offset products.
Material: steel, stainless steel, brass, copper, aluminum,etc Can be customized.
