1.Aluminum housing with special electrophoresis processing, anti-oxidation surface is more wearable and durable.
2.Integrated and fully sealed structure and external circuit design, improves waterproof ability and installation efficiency.
3.Anti-tamper switch opens and triggers alarm if power cut off or end-cap removed.
4.Two different frequency channels, avoiding interference caused by adjacent rays.
5.Intelligent fuzzy analysis technology adopted to improve response speed and stablity.
6.Buzzer indication for well alignment.
7.Alarm method: any two adjacent beams breaks, helpful for preventing false alarms triggered by small animals and birds.
8.Adjustable response sensitivity.
9.Designed and recommended for protection of doors and windows.
10.High immunity to sunlight, rain, frost, fog, snow etc.
ModelAbi10-482Abi30-482Abi60-482Abi100-482Abi10-764Abi30-764Abi60-764Abi100-764
Outdoor range10m30m60m100m 10m30m60m100m
Height48cm76cm
Beams24
ModelAbi10-1086Abi30-1086Abi60-1086Abi100-1086Abi10-1408Abi30-1408Abi60-1408Abi100-1408
Outdoor range10m30m60m100m 10m30m60m100m
Height108cm140cm
Beams68
ModelAbi10-17210Abi30-17210Abi60-17210Abi100-17210Abi10-20412Abi30-20412Abi60-20412Abi100-20412
Outdoor range10m30m60m100m 10m30m60m100m
Height172cm204cm
Beams1012
Detection methodSimultaneous interruption of adjacent 2 infrared beams
Beam frequency2 channel ( a and b )
Power supplyDc11~18v
Current consumption50~90ma max
Response speed40msec
Alarm outputSwitch ouput signal, no, nc optional
Tamper switchNc, opens when cover removed
Operating temperature -25â?? to +55â??
Environment humidity95% max
Alignment angleHorizontal 180â°(â±90â°), vertical unadjustable
Protection degreeIp65
MaterialPc engineering plastic, aluminum housing
Supplier: Ndfeb magnet, magnetic assembly, ferrite magnets, smco, halbach array magnet, surge protection device, gas discharge tube, lightning protection earthing system, spd, gdt, arrester, surge, lightning
Supplier: Japanese quality switchgear components, breakers, magnetic contactors, switches, pilot lights, pushbuttons, panel instrumentations, power management meter, protection relays, transformers, inverters, ups.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Application :- These single core flexible cables are used for wiring in control panels, machines and various electrical installations In small, medium and large industries. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables have low conductor resistance. These wires are insulated with a special grade PVC compound formulated and manufactured in-house which is impervious to water, oil, grease, acids, etc. and are tough to protect from any mechanical abuses. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.50 to 50.00 Sq. mm with ISI mark & 70.0 to 40.0 Sq. mm generally conforming to IS:694 Color Codes : Red, Yellow, Blue, Black, Grey, White, Pink, Green, Violet, Brown, Orange Specification : IS:694 Packing : In 90 meter coils, higher sizes in drums.
Application :- These multi core flexible cables are used for wiring in control panels, machines and various electrical installations in dry and damp interiors specially under typical industrial environmental conditions. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables offer low conductor resistance. These wires are insulated with a special grade PVC compound formulated and manufactured in-house. The tough robust outer PVC jacket protects it from oils, greases and various chemicals and abrasions, thereby giving long life and electrical safety. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.50 to 4.00 Sq. mm in 2 core to 19 cores & 6.00 to 120.00 Sq. mm in 3 core and 4 core. Color Codes : Black and Grey Outer Sheath 2 Core Cables - Red, Black 3 Core Cables - Red, Black & Green (for Earth) 4 Core Cables - Red, Yellow, Blue & Green (for Earth) 5 Core Cables - Red, Yellow, Blue, Black & Grey Specification : IS:694 Packing : In 90 meter coils, higher sizes in drums.
The Variable Speed Drive FRENIC series is equipped with functions and performance to meet all types of requirements, and in addition it is easily maintained and environmentally friendly. The series lineup ranges from simple to advanced-function models, enabling model choices matching situations for use. Fuji Electric provide Variable Speed Drives perfect for automating and with energy saving devices like a fan pump or carrier and variable speeds.
Fuji's servo system can be adapted to several types of motion control, from high-function like synchronization and interpolation to simple-function motion control like Point-to-Point positioning. Meanwhile, the improved auto-tuning function and new option like servo operator make the machine control with high-speed and high-accuracy be achieved more easily.
With high efficiency and high power factor, Fuji Electric's Medium-voltage Variable Speed Drives contribute significantly to cost reduction and energy conservation. Fuji's Medium-voltage Variable Speed Drives products are applicable in a wide range of fields from plants to general industry and feature superior ease of maintenance.