Caracteristicas Técnicas : Ancho / Width X Largo / Length X Alto / Height : 270 X 460 X 630 Peso / Weight : 13 Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 2,1 A / 4,7 A - Condensador / Condenser : 14nf / 55nf Potencia / Power : 0,37Hp / 497W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Muelas de acero templado (62Rb) de 65 mm de diámetro / 65 mm diameter tempered steel grinding wheels Duración de las muelas : 500Kg de café / Duration of grinding wheels : 500Kg coffee Capacidad de la tolva : 1,5kg de café en grano / Hopper capacity: 1,5kg of coffee grains Capacidad del dosificador : 600 g de café molido / Dispenser capacity : 600 g of ground coffee Regulación del dosificador : 5 - 12 g de café molido / Dispenser adjustment : 5 - 12 g of ground coffee Paro / marcha: arranque automático cada 2 cafés/ ON/OFF: Automatic start every 2 coffee La palanca de accionamiento del dosificador puede estar colocada a la izquierda o a la derecha / The dispenser lever can be placed on the left or right side. 0 - 500g = 3’ . - C. O. C. : 4 Kg. - Ruido aéreo: 63dB Diseñado bajo directiva 89/392 CE / Designed according to EC directive 89/392.
Caracteristicas Técnicas : Ancho / Width X Largo / Length X Alto / Height : 210 X 355 X 555 Peso / Weight : 11 Kg Voltage / Weight : 230V/110V/220V Frecuencia / Frequency : 50Hz / 60Hz Fases / Phases : 1(monofásico / Single phase) - Rpm: 1300 / 1600 Intensidad / Current : 1, 55 A / 3,33 A - Condensador / Condenser : 9nf / 40nf Potencia / Power : 0,16Hp / 325W Grado de protección / Degree of protection : IP21 Motor provisto de protector térmico / Motor equipped with thermal protector Tiempo máximo de funcionamiento continuo / Maximum continuous operation time : 30 min. Muelas de acero templado (62Rb) de 60 mm de diámetro / 60 mm diameter tempered steel grinding wheels Duración de las muelas : 500Kg de café / Duration of grinding wheels : 500Kg coffee Capacidad de la tolva : 1kg de café en grano / Hopper capacity: 1kg of coffee grains Capacidad del dosificador : 600 g de café molido / Dispenser capacity : 600 g of ground coffee Regulación del dosificador : 5 - 12 g de café molido / Dispenser adjustment : 5 - 12 g of ground coffee Paro /marcha: arranque automático cada 2 cafés/ ON/OFF: Automatic start every 2 coffee La palanca de accionamiento del dosificador puede estar colocada a la izquierda o a la derecha / The dispenser lever can be placed on the left or right side. 0 - 500g = 6’. - C. O. C. : 3 Kg. - Ruido aéreo: 63dB Diseñado bajo directiva 89/392 CE / Designed according to EC directive 89/392.
COA ITEM GB 20691-2006 RESULT Appearance Stable liquid free from visible suspended matter and sediment Brown to red liquid Content of A.I.,g/l 889-922 900 pH value (Test Method: CIPAC MT 75.2) 5.0-9.0 7.0 Water, % (Test Method:CIPAC MT 30.1) ¡Ü0.4 0.4 Emulsion stability and re-emulsification (Test Method: CIPAC MT 36.1) 0 h Initial emulsification complete 0.5 h Minimum 80% 2.0 h Minimum 75% 24 h Re-emulsification complete 24.5 h Minimum 80% Qualified Stability at 0¡ãC (Test Method:CIPAC MT 39.3) Volume of solid or liquid that separated out should not more than 0.3 ml Qualified Stability at elevated temperature (Test Method:CIPAC MT 46.3) Content of A.I. should no less than that tested before storage and emulsion stability should also comply with standard required Qualified Application: Host Pest Dose (ml/ha.) Method Spring soybean Annual grass and some broadleaf weeds 1500-2100 Pre-emerge soil spray Spring maize Annual grass and some broadleaf weeds 1500-2100 Pre-emerge soil spray Summer maize Annual grass and some broadleaf weeds 1200-1500 Pre-emerge soil spray Peanut Annual grass and some broadleaf weeds 1200-1800 Pre-emerge soil spray Cotton Annual grass and some broadleaf weeds 980-1500 Pre-emerge soil spray potatoes Annual grass and some broadleaf weeds 1500-2100 Pre-emerge soil spray Note: Information above comes from pesticide registration in China. Caution: Firstly, application must occur before germination of weeds and crops, as the pesticide is mainly absorbed by shoots and coleoptile of weeds. Secondly, in case of phototoxicity, prevent this plant protect product from drifting to crops that are sensitive such as cucumber, spinach, chives, foxtail millet, grain sorghum and so on. Thirdly, never use this plant protect product in rice seeding bed.
Agglomerated flux High efficiency, energy saving, Excellent welding performance, High quality, low comprehensive cost. Agglomerated Submerged Arc Welding Flux SJ301 Classifications : GB F4A2-H08A F5A2-H08MnA AWS F6A2-EL12 F7A0-EM12K General Characteristics : Type: silicon calcium Basicity: 1.0-1.1 Grain Size: 10-40 meshes(2.0-0.45mm) Currency: AC/DC(wire to be connected to the positive electrode when using DC) Features: *stable burning arc, easy slag removal and smooth bead with head appearance. Applications *suitable for welding low alloy steels for important products, such as ships, boilers, pressure vessels, pipelines and so on; *suitable for multiple-wire submerged arc welding, especially for butt welding of large diameter vessel with one-pass on both sides; *usually used for SAW of liquefied gas storage tanks, gas bottles and pipeline steel. Typical Chemical Compositions of the Flux (approx, %): SiO2+TiO2 CaO+MgO Al2O3+MnO CaF2 30-40 20-30 25-30 5-13 Mechanical Properties of all Weld metal: wire s/ Mpa b/ Mpa 5/ % AKV(J) EL12 340 420 22 27(-20C) EM12 448 490 22 27(-40C) Notes: 1 Fluxes to be baked for two hours at 300-350C before using; 2 Removal of rust, oil, dirt, water, impurities etc in welding-areas. 25kg/bags. In standard export package or on customer requirements.
Alnico magnets are manufactured by a cast or sintered process. Production level cast Alnico magnets are produced by conventional foundry methods using resin bonded sand molds. The magnetic characteristics for some exotic grades of Alnico magnets are achieved during the casting operation and are due to the unique crystalline grain orientation developed during the process. Sintered Alnico is a powdered metal and it is manufactured by compacting finely milled Alnico powder in a metallic mold. The resulting geometry is not fully dense and it must be sintered in a furnace to achieve a solid state. Properties of all anisotropic or oriented cast and sintered Alnico magnet alloys are optimized during a heat treatment process. The direction of orientation is determined in this phase of the manufacturing process which involves heating the alloy above its curie temperature, then cooling at a controlled rate in the presence of a directional magnetic field. Some cast and sintered Alnico magnets are isotropic or un-oriented and they skip the orientation process. These grades of Alnico magnets usually have lower energy products compared to the anisotropic grades, but they lend themselves to specialized magnetizing. The surfaces of cast Alnico magnets are usually dark grey, have wide tolerances, and have a rough finish. Critical dimensions are abrasively cut or ground in order to maintain close tolerances and improve the fit and finish. Sintered Alnico magnets usually require minimal grinding because they can be produced with tighter dimensional tolerances. It is usually desirable to have features developed in the casting or sintering operations because conventional machining methods are difficult to employ when fabricating Alnico magnets. According to our customer.
We have been manufacturing a qualitative range of products that is signified by the ISO 9001:2008 certification of our company. Our packaging machines come under four broad categories Fully Automatic VFFS Pouch Filling Machines, Fully Automatic High Speed VFFS Multi Track Machine, Pouch-in-Pouch and Flow Wrap Machines. These machines cater to the need of various industries such as food processing, cosmetic, and soap& detergent packaging. To offer our clients with the products as per their specifications, we also provide customized solutions. Our entire range is appreciated for its unique features such as excellent performance, longer service life and reasonable prices. The repeated orders from our clients spread all over the world speak volumes about our utmost quality products. Product to be packed : Packing of Granules products Pan Masala, Supari, Snuff, Tobacco and other product Packing of Liquid/Paste products Shampoo, Ketchup, 2T oil, Syrup, Coconut oil, Grease, Pulp Oil, Ghee and other product Packing of Free Flow & Non Free Flow Products Sugar, Rice, Pulses, Grain, Wheat, Seeds, Capsules, Dry Fruits, Tea, Coffee, ORS, Whole Spices & Detergent Packing of Powders Items Spices, Dust Tea, Milk Powder, Heena, Atta, Suji, Coffee, Colors, Medical powder, Maida, Ground Spices etc Packing of Snacks Snacks, Chips, Namkeen, Kurkure, Wafers, Potato wafers, Popcorn, Peanuts puff Corn snacks, Small Biscuits Horizontal Flow wrap & Candy Machine Biscuits (Single Row), Biscuits (Family Pack), Rusk, Brede, Bearings, Meat tray, Chocolate Cakes, Candy, Syringes, Kitchen care products, Scotch brush, Soap, Mosquito coil Scrubber, Wheel tubes, Candles & many more products.
Due to the manufacturing advantages of tungsten rods, tungsten sheets, tungsten machining parts and tungsten processing equipment, Sunstone established a Division of hot zone of sapphire crystal growing since 2008. Until now Sunstone provided a large number of hot zone parts like crucibles, sheet and rods to Russia, Ukraine, USA, Japan, Korea, Thailand, Singapore Taiwan and Hong Kong. So now we have been gradually formed the capacity of 30 sets hot zone in 35Kg, 65Kg, 85Kg and 120Kg. Sunstone has a sound quality management system of ISO9001 and ISO14001 and get the certification. Sunstone has a excellent testing equipment of physical properties like density, hardness, surface roughness, grain size, tensile strength and other parameters, even ultrasonic NDT. The distinguishing characteristic of Sunstone 's tungsten crucible is high density, high purity and high precision machining. As the whole set of hot zone parts is completed in Sunstone , so the quality between the components is to get a good guarantee. With its excellent quality and reasonable price has been widely recognized by the industry of sapphire crystal growing and hot zone furnace at home and abroad, Sunstone has been designated the sole supplier and leader in domestic and foreign industry. Because of their excellent corrosion resistance again sapphire melt and their high temperature creep resistance, tungsten crucibles are used for sapphire crystal growing in all common processes. Wooden case.
Maps Vacuum press are proven method of PVC foiling on MDF and HDF surfaces. The Maps vacuum press vista is ideal machine for small and medium sized industry. The machine is loaded with full off features. Our machines are designed to consume the minimal power consumption at the same time you get the best result in its class.The mahine doesn't have any hydraulic or pneumatic components which eliminates the high maintanence. Technical Specifications: Sl.No Technical Specification Amt Unit 1 Usable Area 2400 x 1250 mm 2 Max Height of Product 65 mm 3 Max Pressure 2.5 T/m² 4 Foil Width 1400 mm 5 Total Connected Load 14 kw 6 Heating Quartz Tube Heating 7 Dimension 6 x 1.9 x 1.87 mtr 8 Weight 2000 Kg 9 Input 440 V3 Phase Features: 1 Quartz tubular heating for uniform heating and low energy consumtion 2 German make vacuum pump for high efficiency 3 No air connection reqd 4 Grooved bed for placing the product in line with grains of foil 5 see through panel to monitor the process 6 Easily upgraded for double tray 7 Membrane less operation 8 Ease of use 9 Materials like PVC,PP,KYDEX,Polyolefin and high gloss also possible. Applications: 1 Kitchen cabinets 2 Wardrope doors 3 Office furnitures 4 Work station table tops 5 Cabinates 6 Plastic components 7 Flush doors. Nylon wrapping with wooden pallet.
Characteristics of UHMWPE 1. Outstanding impact strength even at very low temperature. 2. Excellent sliding abrasion resistance, wear strength several times as large as steel. 3. Very low coefficient of friction. 4. Nonstick, self-lubrication properties. 5. Good chemical resistance. 6. Excellent anti-aging. 7. Hygienic and nontoxic 8. Light weight. 9. Hydrophobic, energy absorption and sound-dampening properties. 10. Excellent dielectric and insulating properties. Typical Applications of UHMWPE Applications of UHMWPE are very extensive and it mainly applies to following aspects: 1.Building machinery, agriculture machinery, mining machinery; e.g. liners for silos, hoppers, dump trucks, railcars and chutes. 2. Transporting machinery: sliding guide, guide roll, bushing. 3. Packing, container and tubing: open-type pot, bucket, gasoline tank, gas tube, conveying tube of grain. 4. Pulp and paper industry: doctor blade, suction box cover, filter, chain conveyor plate and dewatering plate. 5. Textile machinery: loom picker, shuttle, stick, strap, cap, buffer, gear, pinion and small roller. 6. Chemical industry: pump impeller, pump housing, valve seats and valve gasket. 7. Medical, macromolecular material: artificial articulation, surgical parts. 8. Sport goods: ski and snowboard bottom surface, snowmobile drive sprocket, golf ball core. 9. Aviation and military: bulletproof vest, aircraft seat. 10. Others: lead-acid battery separator, screen plate of nuclear power plant, fishing rope. ISO Package: 25kg/bag
Characteristics of Ultra high molecular weight polyethylene powder 1. Outstanding impact strength even at very low temperature. 2. Excellent sliding abrasion resistance, wear strength several times as large as steel. 3. Very low coefficient of friction. 4. Nonstick, self-lubrication properties. 5. Good chemical resistance. 6. Excellent anti-aging. 7. Hygienic and nontoxic 8. Lightweight. 9. Hydrophobic, energy absorption and sound-dampening properties. 10. Excellent dielectric and insulating properties. Typical Applications of Ultra high molecular weight polyethylene powder. Applications of Ultra high molecular weight polyethylene powder are very extensive and it mainly applies to following aspects: 1. Building machinery, agriculture machinery, mining machinery; e.g. liners for silos, hoppers, dump trucks, railcars and chutes. 2. Transporting machinery: sliding guide, guide roll, bushing. 3. Packing, container and tubing: open-type pot, bucket, gasoline tank, gas tube, conveying tube of grain. 4. Pulp and paper industry: doctor blade, suction box cover, filter, chain conveyor plate and dewatering plate. 5. Textile machinery: loom picker, shuttle, stick, strap, cap, buffer, gear, pinion and small roller. 6. Chemical industry: pump impeller, pump housing, valve seats and valve gasket. 7. Medical, macromolecular material: artificial articulation, surgical parts. 8. Sport goods: ski and snowboard bottom surface, snowmobile drive sprocket, golf ball core. 9. Aviation and military: bulletproof vest, aircraft seat. 10. Others: lead-acid battery separator, screen plate of nuclear power plant, fishing rope. 25Kg/Bag.
We perforate a wide range of round, square, slotted, decorative and even odd shaped perforations from a numerous metal sheets. The most common percentage of open area is between 30% and 50% although more extreme open areas are available depending on the perforation. Some times the percentage open area has to be kept lower for increased strength and flatness of the perforated metal sheet especially when galvanising. The maximum sheet thickness, which we can perforate up to, is 25mm, the most common thickness range for balustrade infill, cladding panels is between 1.5mm and 3.0mm although heavier specifications do away with having to frame the sheets with something like edging profile which we also supply. How to Make Perforated Sheets: The sheet is fed to the machine by means of a Roller System Mechanism. The die is preloaded on the machine. On feeding the sheet, the upper section of the machine starts stroking. The sheet is perforated as per the die and is advanced by the amount of the perforated pitch set on the machine, with the next stroke of the slide. This cycle of feeding and perforating continues automatically. Major Applications: Mining Chemistry Agriculture Architecture Air and Oil Filters Screening process for Grain Drying Furniture Hammer Mills, Etc. Materials: Sheet steel, Stainless sheet, Aluminum sheet, Galvanized and Other Metals. Measures Standard: Sheet size: 1 X 2 meters. 0,915 x 2.44 (3 'x 8') 1.22 X 2.44 (4 'x 8') 0,915 x 3.05 (3 'x 10') 1.22 x 3.05m (4 'x 10') Available in size 26 to 1 / 2 "in Stainless Steel or in carbon steel. Holes from 0,020 "to 5" in diameter. Perforated Mesh Types: Round; Square; Rectangular; Decorative. Special designs according to the specifications upon request. 1000MM*2000MM, 1250MM*2500MM.
QW/WQ Submersible Sewage Pump Application: Municipal works, Industrial buildings Hotels, Hospitals, Civil air defence Drain off the sewage, waste water, rainwater and living water containing solid grains and various long fabrics QW/WQ Submersible Sewage Pump Feather: 1. ) Impeller: With single-channel or double-channel impeller, which is similar to an elbow of the same section, the pump is particularly suitable for the medium containing solid particles( particle size: 50% pump flange size). 2. ) Mechanical seal: Double-channel mechanical seal in series(doule seal type), with durable wear and corrosion resisting seal material. Motor side: Ceramic/Ceramic Pump side: Silicon carbide/Hard Alloy 3. ) Bearing. Three sets. One at the motor side and two at the pump side. SKF and NTN type bearing available if request. 4. ) Oil and water probe: Once the mechanical seal damages and water comes insides, the probe will send out signal to make the protection action. 5. ) Float switch: If request, with pump control cabinet, the float switch can automatically control the pump stop/start according to the water level 6). Movable and fixed installation optional, and double guide automatic rail available. 7. ) Motor: Insulation class: Class F, and protection class 58 Capacity range(m3/h) 5---3000 Head range(m3/h) 7---60 Outlet size(mm) 25---500 Power(kw) 0.75---250 Material: Cast iron, SS302,SS304,SS316 Shaft seal(mechanicalseal) SIC,TC, ceramic,graphite... Temp up to 120 degree PH 3-11 Installation Movalbe or auto coupling type Water leakage probe float switch.
Model: J245 Name: Hans J. Wegner Papa Bear Chair Product Size: 1010*950*910mm Material: Solid Ash wood frame;Pu foam;Woolen fabric or Leather Color: Red, White, Black, Brown. The Papa Bear Chair seems to refer to the animal kingdom with its characteristically playful and organic design. Often called, "the most comfortable chair ever made!" and simply known as "model 19", this classic chair has become an icon of mid-century Danish design. Its Danish name (Bamsestol) translates to "Bear Chair", while in recent years it has bcome affectionately known as the "Papa Bear Chair". Setting the gold standard for general comfort, the Papa Bear Chair is the most popular of the many Wegner designs. A substantial piece of furniture with solid construction, attention to detail, and clean lines, this chair sacrifices nothing in purpose nor at the expense of comfort... a timeless classic. --The frame of this hans j wegner Papa bear chair is made of Solid ash wood,of which the visible legs and armrests can show the grain of wood.The legs and armrests of this danish furniture can be painted into light or dark walnut,natural wood,or black colors. --The top of amrests,bear nose,of this chair and ottoman is the very same design as original danish wegner papa bear chair,also named Teddy Bear Chair. --This Danish hans J wegner lounging chair is padded with Pu foam and the chair with ottoman can be upholstered with woolen fabric or real leather. --The shape of backrest for this modern classics designer danish armchairs is designed as per the scale from original wegner papa bear chair,that`s the two lines in the middle are squares pieces and the others are rectangles. --All the leather or fabric pipings around this danish papa bear chair chair and ottoman are sewed carefully to insure a straight and nice look. --The back chairs with footstool can be placed in living room as living room chairs or in rest room as lounche chair. Packing:iset/ctn Dimesions:1010*950*910mm.
Levels T22/P22 T5/P5 T9/P9 T91/P91 T23/P23T92/P92 Features Most commonly used , low alloy heat resistant with strong characteristic. Commonly used as heating surface pipes in fire/nuclear /petrochemicals industryGood performance in antioxidant, inoxidability, structure stability as well as perfect processing propertyIts Chrome Content is increased and with better performance in antioxidant, inoxidability than T5, but with weaker heat resistance and welding performance, high anti Coxidantant and anti high temperature corrosion. Stable Toughness / durable plastic / thermal force; T 610,its admissable stress is higher than the austenitic steel, T í¦ 550. Recommended allowable stress of steel is twice as high as that of T9 twice. In addition to high anti-oxidation, good corrosion resistance, high impact toughness and stable / durable plastic / heat intensity, smelting deformation of micro-alloying to obtain high-density dislocation / highly refined grains, welding performance improved. Significantly.The increase of W element is significantly improved resistance to high temperature oxidation and to hot corrosion compared with T91. Mo's appropriate decrease improve the stability and availability of welded steel / welded joint. B is the strong element temperature which highly improve the resistance to elevated temperature creep. Its resistance to lasting / creep / corrosion resistance is better than T91. We can offer 21"-48".
This production line is composed of the feeder machine, jaw crusher, the counter-attack crusher, vibrating screen, belt conveyor and centralized electric control. It can be used crushing many kinds of materials aggregate like the limestone, granite, basalt, river stone and slag and so on. It is suitable to be applied to the water and electricity, building, building materials, highway, urban construction profession. Basic technical process introduction of stone production line Firstly, the stone from the mountain will be fed into the jaw crusher to be preliminary crushed. The finished product after be crushed thickly will be transported to the counter-attack crusher to be further crushed by the belt conveyor. Secondly, the stone after be crushed twice will be transported to the vibrating screen by the belt conveyor and the different specification gravel will be screened by the vibrating screen to satisfy the customer request. The unqualified gravel returns to the counter-attack crusher by the belt conveyer to be crushed once again and forms the close up to complete the crushing work. Stone material production line performance introduction This production line has the high automatization, high efficiency production, low cost, high income, the finished product granularity even, good grain size which conform to the national high speed materials requirement. This selection of equipment of the production line is mainly decided by the specification, output and the customer request. We can provide the customer with the comprehensive technical process and technical support also may design the non-standard parts and so on according to the installment condition of the site.
Features 1. A large inlet, high crushing chamber which is suitable for materials with high hardness, biger block and less powder; 2. Clearance between impact-plate and plate can be adjust conviniently, which can make effective control of the particle size posible, broken end product is of cubic shape, the grain shape is good; 3. It has compact structure, high machine rigidity, and the rotor has a large inertia; 4. High chrome hammer, impact resistance, abrasion resistance, mechanical wear small, big impact; 5. Using new rotor can increase the impact force; 6. Broken-function is complete, reduction ratio is big, it is of high productivity, low energy consumption, and its overall efficiency is high. 7. Keyless connection, simple structure, easy maintenance, economical and reliable. Technical parameter of impact crusher : Mm to inch conversion: 25.4millimeters=1 inch Model size of rotor (mm) feed opening (mm) max. Feed Size (mm) capacity (t/h) power of Motor (kw) weight (t) Pf1007 ¦µ1000¡Á700 400¡Á730 300 15-30 37 6 Pf1010 ¦µ1000¡Á1050 400¡Á1080 350 50-80 75 12.5 Pf1210 ¦µ1250¡Á1050 400¡Á1080 350 70-130 110 16.5 Pf1214 ¦µ1250¡Á1400 400¡Á1430 350 90-180 132 19 Pf1315 ¦µ1320¡Á1500 860¡Á1520 500 120-250 200 24 Pf1320 ¦µ1320¡Á2000 860¡Á2030 500 160-350 260 27
Features: 1. The crushing cavit is deep and without dead zone, which can increase the feeding capacity and capacity; 2. It has a big crushing ratio and even grain shape. 3. The gasket type inlet size makes flexible adjustment posible, and it¡¯s reliable, conveinent, and with a big adjustment range, which can greatly enhance the flexibility of the equipments. 4. The lubrication system is safe and reliable, and it¡¯s quite convinient to change components and there will be less maintenance needed. 5. It has a simple structure, and is quite stable and low in operation cost. 6. The equipment is energy saving: 15%-30% energy can be saved for each single plate, more than twice energy will be saved for the whole system; 7. The size of outlect is quite adjustable, which can meet requirements of different customers. 8. Low noise, less dust; 9. Simple structure, convinient to repair; stable performance, low operation cost; big crushing ratio. Technical parameter of jaw crusher : Mm to inch conversion: 25.4millimeters=1 inch Model max. Feeding Size (mm) discharge Size (mm) capacity (t/h) motor Power (kw) overall Dimensions (mm) weight (t) Pe400¡Á600 350 40-100 15-60 30 1700¡Á1732¡Á1653 6.5 Pe500¡Á750 425 50-100 50-100 55 2035¡Á1921¡Á2000 10.3 Pe600¡Á900 480 65-160 60-130 75 2290¡Á2206¡Á2370 16.5 Pe750¡Á1060 630 80-140 80-180 110 2620¡Á2302¡Á3110 29 Pe900¡Á1200 750 95-165 140-260 110 3789¡Á2826¡Á3025 54.5 Pe1000¡Á1200 850 195-265 315-550 110 3335¡Á3182¡Á3025 57 Pe1200¡Á1500 1020 150-300 400-800 160-220 4200¡Á3750¡Á3820 100.9
Jaw Crusher is mainly used to crush kinds of mining stones primarily and the largest compression resistance of the material to be crushed is 320Mpa. The jaw crusher is widely used in mining, metall-urgical industry, building material, highway, railway and chemical industry. Working Principle: The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher. Characteristics: High ratio of crushing, homogeneous final grain size, simple structure, reliable working condition, easy maintenance, low operating cost. Type Inlet size (mm) Max Feeding Size (mm) Discharge Size(mm) Power (KW) Capacity (T/H) PE150x250 150x250 125 10-40 5.5-7.5 1-5 PE200x350 200x350 125 15-40 7.5-11 5-16 PE250x400 250x400 210 20-60 15-18.5 5-20.
This dry type grinding is designed in order to achieve the no.3, no.4, hairline finishing with abrasive belts for metal sheet surfaces grinding or finishing or brushing or polishing (as stainless steel sheet aluminum sheet or coil). Single or multiple abrasive belts of variable grain patterns adaptable. This kind of machine always work with conveyor bed, precisely up or down on 4 pneumatic spindles, dust extraction funnels. Max. Working width include: 600mm;800mm;1000mm;1300mm or others Working length: more than 400mm; working thickness: 0.5-30mm; feed speed: 5-30m/min The processing of this machine is: Metal sheet--conveyor bed---grinding machine---conveyors---film laminating machine(laminate protective film on the metal sheet in order to protective the sheet )--metal sheet. This kind of machine include msrr( two abrasive belt ), msrrr(3 abrasive belt ), msrrb(2 abrasive belt and 1scrotch-brite rollers ) three models. Depend on your sheet roughness and effect you required. You can choice different model.. 16 of the ms16rr meaning max width is 1600mm. 13 of ms13rr meaning max width is 1300mm. Technical parameter Machine modelms16rrms16rrrms16rrb Work piecethickness0.5-30mm0.5-30mm0.5-30mm Maxlength320mm320mm320mm Width40-1600mm40-1600mm40-1600mm Abrasive belt linear speedabout 14 m/sabout 14 m/sabout 14 m/s Size(wxp)1630x1900mm1630x1900mm1630x1900mm Conveyor beltfeed speed5-20m/min5-20m/min5-20m/min Size(wxp)about 1600x3350mmabout 1600x4330mmabout 1600x4330mm Motor (kw)no.1 main motor30.0kw30.0kw for no.4 2.5kw for hl optional30.0kw No.2 main motor30.0kw30.0kw No.3 main motor15.0kw Feed-in motor4.04.04.0 Lifting motor0.370.370.37 Airconsumption volume about 0.66m3/minabout 0.76m3/minabout 0.76m3/min Working pressure0.55mpa0.55mpa0.55mpa Dust exactorwind volume6500 m3/h8500 m3/h8500 m3/h Pressureabout 2300paabout 2300paabout 2300pa Wind speed25-30m/s25-30m/s25-30m/s Export standard
Product brief introduction: VB series vibrating motor is the universal vibrating source for various electric vibrating machines, such as vibrating feeder, vibrating conveyer, vibrating ore drawing machine, vibrating shake-out machine, vibrating screen classifier, hopper wall vibrator of the storage hopper, vibrating platform, etc. Our VB series of vibration motors sell well on markets at home and they have been exported to Europe, Japan, Southeast Asia, etc. We ever achieved the silver medal of the National Spark Program Achievement Applicable Exhibition, Provincial Prize for Quality Product, Provincial Prize in Science and Technology, Provincial Prize(Golden Crane Prize) for New Quality Product, Provincial Prize for Energy-Conserving Product, and so on. Applications: Electricity/Gas, building materials, coal industry, mine, chemical industry,light industry,casting, metallurgy, grain industry, fire-resisting industry, etc. Features: 1, The vibration (exciting force) is compatible with the rating appropriately,with a low-weight and small machine body; 2, With merits of low noise and energy-saving owing to vibrating caused by gentle and stable turning; 3, Full enclosed structure, can be applied to any dusty circumstances which has no special explosion-proof requirements; 4, With a long working life, among which the bearing working life of the two-stage reaches 5000 times, while the 4,6,8 stages no less than 12000 hours; 5, The vibration(exciting force) can be adjusted only by modifying the angle of the eccentric block; 6, Multiple vibrators can be grouped up to meet different mining requirements; 7, The vibrating motor with globally max exciting force was born in our factory; Working conditions: Environmental temperature: Less than 40 Altitude: No more than 1000 meters Power: 380 V, 660 V Frequency: 50HZ/60HZ Insulation grade: B grade Operation mode: Continuous (S1) Install method: Any direction Protection Level: IP54.
