Vacuum Press

Technical data of the machine Working area dimension 2350 x 1250 x 60 mm. Maximum pressure 210 ton – 6 kg / cm¦ Surface pressure 160 ton – 5 kg / cm¦ Gradual pressure characteristics Electronic Vacuum pressure 28 ton – 750 milibar Vacuum capacity 100 m¦/h Vacuum motor power 3 kw – 1400 rpm (2 motors) Pressing motor characteristics 1.1 kw – 2800 rpm Resistance heating power 18 x 1000 w Air resistance 4 x 1000 w Air pressure 6 bar Total power 30 kw, 380v , 50hz Machine body dimensions 2000 (w) x 2020 (h) x 2900(l) Pressing plate dimensions 1700 (w) x 1090 (h) x 3350(l) Machine’s total weight 5 ton

Technical Specifications : Exterior size: 5800(Double plate 8800) mm, 1500 mm, 1400mm Working plate inner size: 2550mm, 1150 1300 mm (if producing the door, you choose 1150mm;if producing cabinet, you choose 1300mm) Maximum height of the work piece:50mmincluding height of Magnetic block or bottom plate Rating working pressure: -0.095Mpa General Power: 15kw Actual power consumption: about 5kw Weight: 2.5T Top temperature:180. EPE film+preservative film 3.2X1.8X2M 2500KG.

- Due to circulational cooling system the pressing process is done faster. - There are rails and locks installed on the machine in order to put on silicon membrane and to work with natural veneer. - There is an automatic film fixation mechanism, that helps save time preparing before the pressing. Also it helps prevent defects on the pressed pieces, that may arise as a consistence of wrong replacement of the film on the worktable. - Press head lifters are designed to prevent swashes of the head of the machine. -Air dispersion system provides a proportional dispersion of the air inside the machine while pressing, so the air temperature in each corner of the machine is the same. -After recent modifications the quality of covering of wood pieces with PVC has risen. -The machine is extremely easy for use, so it can be used even by low-qualified workers. -There is one machine better than this one- it is membrane-vacuum press with additional air pressure. Vacuum 40 m3/hour The dimensions of the machine 2800 x 1600 mm x 1500 mm Total power 27,5 Kw The dimension of the worktable 1400 x 2500 mm The area of the worktable used 1200 x 2300 mm The time required for pressing process (up to material) 2-20 min. Circulational cooling system The system of automaic fixing of PVC or similar materials. Automatic vacuum system Weight 600 кg

1.Widely application,material could be wood veneer heat transfer film,PVC film etc,it is professional for making PVC wood door,cabinet and other wood furniture 2.Intelligent temperature controller,heating area adopt energy-gathered reflecting cover,save electricity 3.Heating tubes are specially customized for our factory,with 8000-10000 service life,could run 24 hours 4.Heating box is controlled by cylinder,tight closed,beautiful appearance,easy to open and close 5.Take less space,easy for installation and operation.

Multifunctional 3D Vacuum Press, it's also heat transfer machine. This machine applies to sublimation blanks,such as mugs,plates,3D phone cases,ornaments,keychains and other sublimation blanks. Available color:Red, Black, Silver Advantages: Fashional appearance; Simple operation; Multifunction; High efficiency; Noise management; Automatic heating up; High intelligence; Professional customer service; www.zoomsublimation.com

Vacuum press filter is an updated equipment of our company with patent right. It is suitable for all circumstances that the common pressure filter of belt type (dy type) can be used in and dehydration of compressible and fine sticking materials that need washing, with the productivity enhanced by 30 to 50%, water content in filter cake reduced by 5 to 8%. The mixer, also known as blender, is a necessary device for the uniform mixtund blend of various materials. The mixing drum is used to completely mix medicre aine thus increasing its effect time and making it more effective in a short time. The agitating machine is widely used for concentrating purposes in every chemical industry that involves mixing. The v-belt facilitates the rotation mechanism of the machine.

Stainless steel 304/food grade PP, 350ml/12oz Coarse,25g-35g Double-walled, vacuum-insulated S/S outside 201 + inside SUS304 Can keep drinks hot or cold for hours Unique filter system more efficiently brew coffee on the go. No over-extraction. Isolate water and sediment First, it is a vacuum flask, can keep your coffee warm or cool for hours Secondly, it can make coffee, similar with the french press but no any residue as the french press always do. Because of the extra fine mesh filter. Thirdly, with our patented self lock system, it can lock the brewed coffee and will not let it drop down to the coffee ground, even you drink it hours later, will not affect the taste. Vacuum flask plus coffee maker, what you do is just to fill in the coffee, press the plunger, then ready to go. So easy and convenient. Suitable for many occasions.

1.Fast speed: The working period of both ordinary work-piece and highlight work-piece is less than 2 minutes after it enters the main machine, which is 2-4 times of the efficiency of common positive and negative pressure membrane pressure equipment. 2.Good effect: The product processed by common film has clear groove, no open side, bubbling, no color difference, and high light working surface has strong adhesion, and the effect reaches the international leading level. 3.Low energy consumption: The total power of the machine is 35KW, which is one half of that of the peer equipment;The main heating starting power is 21KW, and the average power consumption is 12KW/h. 4.High configuration: The key part of the machine adopts original parts from Germany, Japan and Taiwan, which is high configuration and stable performance. 5.High working efficiency: The whole machine adopts automatic top block. Compared with other domestic manufacturers, it saves the technological process of making the pad, saves the cost of process raw materials. The technology can be applied to different manufacturers and different positive and negative pressure devices, which saves the cost of replacing equipment. saves the scanning sequence of the pad of the equipment, saves the time of laminating process, greatly improves the working efficiency and reduces the labor cost.

1.Fast speed: The working period of both ordinary work-piece and highlight work-piece is less than 2 minutes after it enters the main machine, which is 2-4 times of the efficiency of common positive and negative pressure membrane pressure equipment. 2.Good effect: The product processed by common film has clear groove, no open side, bubbling, no color difference, and high light working surface has strong adhesion, and the effect reaches the international leading level. 3.Low energy consumption: The total power of the machine is 35KW, which is one half of that of the peer equipment;The main heating starting power is 21KW, and the average power consumption is 12KW/h. 4.High configuration: The key part of the machine adopts original parts from Germany, Japan and Taiwan, which is high configuration and stable performance. 5.High working efficiency: The whole machine adopts automatic top block. Compared with other domestic manufacturers, it saves the technological process of making the pad, saves the cost of process raw materials. The technology can be applied to different manufacturers and different positive and negative pressure devices, which saves the cost of replacing equipment. saves the scanning sequence of the pad of the equipment, saves the time of laminating process, greatly improves the working efficiency and reduces the labor cost.