This production line is composed of the feeder machine, jaw crusher, the counter-attack crusher, vibrating screen, belt conveyor and centralized electric control. It can be used crushing many kinds of materials aggregate like the limestone, granite, basalt, river stone and slag and so on. It is suitable to be applied to the water and electricity, building, building materials, highway, urban construction profession.
Basic technical process introduction of stone production line
Firstly, the stone from the mountain will be fed into the jaw crusher to be preliminary crushed. The finished product after be crushed thickly will be transported to the counter-attack crusher to be further crushed by the belt conveyor. Secondly, the stone after be crushed twice will be transported to the vibrating screen by the belt conveyor and the different specification gravel will be screened by the vibrating screen to satisfy the customer request. The unqualified gravel returns to the counter-attack crusher by the belt conveyer to be crushed once again and forms the close up to complete the crushing work.
Stone material production line performance introduction
This production line has the high automatization, high efficiency production, low cost, high income, the finished product granularity even, good grain size which conform to the national high speed materials requirement. This selection of equipment of the production line is mainly decided by the specification, output and the customer request. We can provide the customer with the comprehensive technical process and technical support also may design the non-standard parts and so on according to the installment condition of the site.
Stone crushing equipment consists of jaw crusher, impact crusher, cone crusher, fine crusher, roll crusher, hammer crusher, mobile crushing station, etc. Process of rock crushing line: Big size stones are transferred to primary crusher through Vibrating Feeder from hopper for first crushing, then the crushed materials are transferred to Impact Crusher through Belt Conveyor for secondary crushing. The crushed materials will be transferred to the vibrating screen, and separated to different sizes. The aggregate with suitable size will be transferred to the final product pile and that with unsuitable size will be transferred to the Impact Crusher for re-crushing. This forms closed circuit manifold cycles. The sizes of final products will be graded and separated according to customers' requirements, and the deduster will be attached for the sake of environment protection. Characteristics of stone crushing line: They are widely used in the mine, metallurgy, building materials, highway, railway, water irrigation and chemical industry. They have the features: Big crushing ratio, even granularity, simple structure, reliable working condition, convenient repair and economical operation. This factory produces various types of rock crushing and screening device, including coarse crushing Jaw type, fine crushing Jaw type, cone type, impact type breaker and vibration feeding machine, reciprocating sieve, belt conveyor, they have the characteristics of large crushing ratio, granularity is even, advanced structure, reliable work, excellent quality., the use service is convenient, low operation expenses, etc. Deeply welcomed by domestic and foreign customers. Our factory can offer many kinds of sets of equipment to meet the different stone materials yard production needs, provides the quarry design, the equipment setup, the debugging start-to-finish service for the user. This equipment widely uses in the stone material factory, the mine, the metallurgy, the building materials, the road, the railroad, the water conservation, the chemical industry and other departments. Productivity from 50-500t/h, product size can be according to the users' different needs combination and classification.
The stone production line is composed of vibrating feeder, jaw crusher, impact crusher, vibrating sieve, belt conveyor and computer controlling board; its design output veries from 50 tons to 500tons per hour. In order to meet the needs of different clients, cone crusher and dust collecting equipment can be added to the prodution line. It can be used in industry like hydroelectricity, building materials, express way, city construction to operate the aggregate of hard limestone, granite, pebble, slag of metallurgy and man-made sand. We can combine different model of machines in the production line according to different technical process. Brief introduction of the stone production line Big block of stone is evenly conveyed to jaw crusher by vibrating feeder via silo for primary crushing. After primary crushing, the stone is sent to impact crusher by belt conveyor for secondary crushing. Then the stone is tronsported to vibrating sieve for screening, thus the stone can be classified into several groups depending on the size. The stone with a necessary size will be sent by belt conveyor to the palce where finished product is piled; otherwise, the stone will be conveyed by belt conveyor to the impact crusher for another crushing, thus a circular production process is formed. Introduction of stone production line performance This production line is highly automatic, except the turning on, turning off and daily maintenance of the equipments no other mannual operations are needed. It enjoys the advantages like: high efficiency, low cost, high throughput, high profit, evenly-sized and good-shaped finished product, meeting the national requirements of rapid need of raw materials.
Stone Production Line: Zhengzhou Vipeak Heavy Industry Machinery Co., Ltd. manufactures various equipments for whole set of stone production line, and provide complete technical support for customers. The whole production line consists of vibrating feeder, jaw crusher, impact crusher, vibrating screen, belt conveyor, electric control, etc. We design different production lines ranging 50 t/h to 500 t/h by combining different models of equipments also matching cone crusher, deduster, etc.It is widely used for crushing hard limestone, granite, basalt, gravel, metallurgic slag, etc or artificial sand making for hydroelectric power, building material, high way, city construction, etc. Different models of equipments are combined to meet different customers' demands according to different craft requirements. Process of the Production Line: Big size stones are transferred to primary crusher through vibrating feeder from hopper for first crushing, then the crushed materials are transferred to impact crusher through belt conveyor for secondary crushing. The crushed materials will be transferred to the vibrating screen, and separated to different sizes. Those aggregate with suitable size will be transferred to the final product pile and those with unsuitable size will be transferred to the impact crusher for re-crushing. This forms a closed circuit manifold cycles. The sizes of final products will be graded and separated according to customers' requirements, and the deduster will be attached for the sake of environment protection.
Jaw Crusher Components: 1 Frame 2 Crushing Chamber 3 Swing Jaw & Main Bearing Housings 4 Flywheel 5 Eccentric Shaft 6 Bearings 7 Hydraulic Cylinder 8 Shim 9 Toggle Block 10 Tension Rod with spring 11 Toggle Seat 12 Toggle Plates 13 Check Plates 14 fixed plates (left) moveable plate (right) Illustration of How Jaw Crusher Crushes: A jaw crusher reduces large size rocks or ore by placing the rock into compression, a fixed jaw, mounted in a ¡°V¡± alignment is the stationary breaking surface, while the moveable jaw plate exerts force on the rock by forcing it against the fixed jaw plate. The space at bottom of the ¡°V¡±, aligned jaw plate is the crusher product size gap, or the size of the crushed product from the jaw crusher. Model PEF150X750 PEF200X300 PEF250X400 PEF400X600 PEF350X750 PEF500X750 PEF600X900 PEF750X1060 PEF900X1200 PEF1000X1200 PEF1200X1500 PEX150X750 PEX250X750 PEX250X1200 PEX300X1300 International standard container, the spare parts is packed in wooden cases.
Cone crusher is mainly divided into spring cone crusher, cs series cone crusher, hp series hydraulic cone crusher, py series hydraulic cone crusher.According to the crushing cavity type, cone crusher can be divided into:standard, medium and short head cone crusher.Standard crusher is applied to secondary breaking, medium crusher is used to finely breaking, and short head crusher is also used to finely breaking which break into 5-10mm.Users can purchase depending different requirements. Negotiable
Cone crusher is widely used in metallurgical industry, building materials industry, construction industry, chemical industry and silicate industry, applicable to crush various kinds of ores and rocks of medium or above medium hardness, and cone crusher is of big crushing ratio, high efficiency, large capacity, low cost, easy adjustment, and use economically, etc. The reasonable part selection and structural design extend crushers' usage life, and the final products of uniform particle size reduce the cycle load; the medium to large-sized crusher, adopts the hydraulic clear-cavity system, reduces downtime, and various types of crusher cavity to better adapt to user needs.
Fujian jinjiang xianda machinery is the biggest wire saw stone cutting machine factory in china. And specializing stone machine from 1985. Dnfx-1300-1400 computer automatic multi-function profiling linear machine adopts computer profiling line, cutting with double blades, which is specially used for cutting profiling lines, roman column, big column slab and so on for the heterotype stones. Seaworthy packing
Impact Crusher is also known as impact sand maker. It is widely used for breaking medium or fine degree of hard and brittle materials, such as rock, abrasive, refractory material, cement clinker, quartz, iron ore, concrete aggregate, etc. It is especially suitable for crushing construction sand and road sand. HX-type vertical impact crusher is composed of feeder, distributor, eddy crushing chamber, impeller experience, spindle assembly, electrical transmission base and eletric motor.
