Plywood Hot Press machine is one of the main equipments in producing plywood,blockboard, film faced plywood, fancy plywood. 1.The main frame is welded by No.1 national standard steel plate,strong body, high rigidity. 2. Adopt micro computer control system and imported hydraulic units, easy to operate,long working life. 3. Adopt advanced hydraulic pump station and plunger cylinders, featured product--aviation technology low noisy hydarulic pump. 4.Hydraulic control system is made by good quality hydraulic units, fast pressure, accurate press, high efficiency. 5. All the hot platens are made of the best quality steel plate, after solid drilled and fine polished, good thermal conductivity. 6. It has manual and automatic transfer function to meet user's demand. Technial Parameters: 1. Various pressure: 400T/500T/600T/800T/1000Ton and more. 2. Plywood sizes: 1220x2440mm, 915x1830mm etc.
Features: 1.High precision hard chrome steel a c b e f g flute corrugated roller 2.Type: hard chrome & tungsten carbide 3.Used for carton box corrugator machine-single facer Description 1.Hard chrome type corrugated roller The upper and lower corruagted( corrugating, flute) roller for single facer machine Made of 48 crmo alloy steel or tungsten carbide with hard treatment by laser, the hardness is above hrc58o-60o The surface is well treated by grind and plated chrome. Different type of flute according to user's request. 2.Tungsten carbide type corrugated roller Tungsten carbide technology is best surface treatment of corugated roll With tungsten carbide coat on the surface of flute, make the corrugated roller with high wearability. The lifetime of corrugated roller become more longer lifetime. Tungsten carbide corrugated roller with lower flute height, and height of teeth keep for long time, save flute paper and glue capacity, make the paperboard stable quality. More important is the flute height almost not change during whole running life.
BR45 Section Bending Machine is mainly composed of fuselage part, side roll part, idler part, transmission part, electrical part and hydraulic system, mould and so on. 75-profile bending machine has the bending function of the profile, three working rollers are mainly drive rollers, through the hydraulic motor, gear to achieve, the two lower roll for hydraulic transmission. The two rollers can be around the fixed rotary center to do arc movements, work rolls on both sides of the roll and Correction Guide roll device, to ensure that asymmetrical section (such as angle steel) profile roll quality. Advantage: The advantage of the bending equipment is that it has good precision and high working efficiency. Model 45-profile bending machine with advanced structure, reliable work, small size, full-featured, is the advanced profile forming equipment at home and abroad. Widely used in boilers, shipbuilding, hydropower, metal structure and other industries. Uses of BR45 Section Bending Machine: City building,High-altitude cable car,Small and medium-sized steel production,auto industry,Flange production,Roller sticks and auto parts,Heat exchange industry,Small household appliances.
WQ600 ORP Sensor Description WQ600 (Redox) ORP Sensor is a rugged and reliable ORP/Redox measuring device. The sensor is molded to 25' of marine grade cable, with lengths up to 500' available upon request. The WQ600's output is 4-20 mA with a three wire configuration. The unit's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing. WQ600 ORP Sensor Features * Continuous ORP monitoring * Fully encapsulated electronics * 4-20 mA output * Marine grade cable with strain relief * Stainless steel housing WQ600 ORP Sensor Applications Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications. WQ600 ORP Sensor Specifications * Output: 4-20 mA * Range: -500 to +500 mV * Accuracy: 2% full scale * Maximum Pressure: 40 psi * Operating Voltage: 10 to 36 VDC * Current Draw: 0.2 mA plus sensor output * Warm-up Time: 3 seconds minimum * Operating Temperature: -40 to +55'C
Φ168 Cold Forming Elbow Machine Cold Forming Elbow Machine Stainless Steel Elbow Machine Product introduction Stainless Steel Cold Forming Machine is fit for producting elbow with radius of 1D,1.5D and diameter from 1/2to 24. Features 1. Easy to operateadopt PLC control 2.Energy saving 3. Environment friendly Technical parameters Model  Size Range  (mm) Clamping Force  (KN) Pushing Force    (KN)) Rated working pressure  (MPa) Total power of motor  (KW) Total Weight (kg) EDY-100Φ25-Φ76100063025116300 EDY-200Φ34-Φ114200012502518.59000 EDY-400AΦ133-Φ273400025002529.538000 EDY-400BΦ108-Φ219400025002529.535000 EDY-630Φ133-Φ32563003150253648000 EDY-800Φ219-Φ37780004500254276000 EDY-1000Φ273-Φ426100005000256598000 EDY-1600Φ325-Φ5301600080002588.5130000 EDY-2000Φ406-Φ630200001000025110200000
Comply with ANSI/EIA RS-310-D\IEC60297-2\DIN41494; PART1\DIN41494; PART7 Feature: Exquisite design with precise dimension and craftsmanship; Toughened glass door with net hole, vented front door border and steel rear door; Adjustable feet and heavy duty castors are available simultaneously; Cable entry on the top cover and bottom panel with adjustable sizes; Optional installation of plinth to enable cabinets fixation, under-base cable entry/ventilation; Efficient and reliable cabinet connection by baying kit; Removable side panels to ease maintain; Around 1/3 assembled original volume when flat pack. Material: SPCC cold rolled steel; Thickness: Mounting profile 2.0mm, mounting angle 1.0mm, others 1.2mm Surface finish: Degreasing, pickling, phosphoric, powder coated Loading capacity: Static loading: 800KG
Relying on application practices, HFM Fully Welded Plate Heat Exchangers are widely applied in oil and gas industry, refinery applications, pharmaceutical industry, chemical/petrochemical industry, automotive, pulp and paper industry and steel industry. The Semi-welded Plate Heat Exchanger is particularly offered for heating and cooling of aggressive media. Two corrugated plates are positioned back to back and welded together as "cassette" by laser, along the sealing groove designed for the gasket of the semi welded PHE. The semi-welded plate for PHE is specially offered for aggressive media. Generally, two pieces of PHE stainless steel plates are welded back to back by laser along the sealing groove for the gasket to form the plate cassette. Each cassette is sealed with a gasket. The refrigerant flows from one cassette to the other, contacting with only two of the four ring gaskets at the inlet and the outlet.What are the advantages of Semi-Welded Plate Heat Exchanger?1. Wide temperature range from -38 to 2002. Maximum design pressure up to 30 bar3. Rigid mechanical construction4. Outstanding leak-proof for high safety5. Capacity in handling aggressive media6. Adjustable size7. Compact structure and small installation space
Round Neodymium Base Pot Magnet A pot magnet is a permanent magnet encased in a steel shell, which is sometimes called a pot, hence the name 'pot' magnet. A permanent magnet emits a magnetic field without the need for any electricity. Pot magnets are often used as magnetic bases and magnetic holders for large supermarket ceiling signs. Name: Permanent Round Neodymium Base Pot Magnet Material: Neodymium Iron Boron + stainless steel pot shell Size: D25, D32, D36, D60, D90 or customize Coating: Nickel, Black Epoxy, Sprat paint(colorful) Packing; Wholesale packaging: standard shock-proof corrugate carton Retail packing: customize personality box Sample: Free sample 1-2 pcs Production time: 25 wo0rking day Certificates: SGS, TS16949, ISO9001:2000 Retail usage: The countersunk disc magnet encased to a cup shape stainless metal. Strengthen the magnetic of the magnet itself compared with the magnet in the same size. This item is hot for various applications. And it is hot-sell on the Amazon and E-bay, we provide the magnet, also the individual package. We can manufacture the whole unit as per your design drawing, we can provide the solution according to your idea as well.
WQ101 Water Temperature Sensor Description WQ101 Temperature Sensor is a rugged and reliable device for highly accurate submersible water temperature measurement. The sensor's probe is molded to 25' of marine grade cable, with lengths up to 500' available upon request. The WQ101 has a two-wire configuration for minimum current draw. The unit's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing. WQ101 Water Temperature Sensor Features * Fully encapsulated electronics * 4-20 mA output * Marine grade cable with strain relief * Stainless steel housing WQ101 Water Temperature Sensor Applications Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications. WQ101 Water Temperature Sensor Specifications * Output: 4-20 mAâ?? * Rangeâ??: -50 to +50'Câ?? * Accuracy: ±0.2'F or ±0.1'Câ?? * Operating Voltage: 10 to 36 VDCâ?? * Warm-up Time: 5 seconds minimumâ?? * Operating Temperatureâ??: -58 to +212'F (-50 to +100'C)â??
SC(B) type 10 epoxy resin casting dry transformer is manufactured by standard "dry power transformer", which has low performance loss, good energy saving effect, operation economy and maintenance.Besides the advanced technology structure, the anti-short circuit and the lightning impact level are high, it also has the characteristics of resistance, moisture proof, dustproof and low noise.It is widely used in high-rise buildings, airports, stations, terminals, power plants and substations.It is especially suitable for the installation and use of fire-resistant and explosive places. The standard type transformer produced by our company is not covered with shell, and the protection grade is IP00. If the customer needs to provide the protection grade for IP20 and IP23 shell.The shell can be made of ordinary steel plate, stainless steel plate, aluminum alloy and other materials according to customer's requirements, and it can be treated with acid, phosphating, spraying and etc.The temperature control display instrument and load measuring instrument are installed in the low pressure side of the shell, which is convenient for users to observe and is safe and reliable.
WQ201 pH Sensor Description WQ201 pH Sensor is a rugged and reliable water pH measuring device. The pH transmitter is mounted on 25 ft of marine grade cable, with lengths up to 500 ft available upon request. The sensor's output is 4-20 mA with a three-wire configuration. The WQ201's electronics are completely encapsulated in marine grade epoxy within a stainless steel housing. The unit also uses a removable shield and replaceable pH sensor element for easy maintenance. WQ201 pH Sensor Features * Submersible pH measurements * Fully encapsulated electronics * 4-20 mA output * Marine grade cable with strain relief * Stainless steel housing * Replaceable pH element WQ201 pH Sensor Applications Ideal for stream and lake monitoring, aquaculture studies, baseline analyses, mitigation monitoring, and other environmental applications. WQ201 pH Sensor Specifications * Output: 4-20 mA * Range: 0 to 14 pH * Accuracy: 2% full scale * Maximum Pressure: 40 psi * Operating Voltage: 10 to 30 VDC * Current Draw: 5.5 mA plus sensor output * Operating Temperature: 23 to +131'F (-5 to +55'C) * Warm-up Time: 3 seconds minimum
Voltage 600V or less Construction RHH or RHW-2 or USE-2 aluminum conductors are AA-8000 series Aluminum Alloy, compact stranded. Insulation is an abrasion, moisture, heat, and sunlight resistant black cross-linked polyethylene (XLP). Copper conductor is also available. Standard RHH or RHW-2 or USE-2 conductors meet or exceed UL Standard 44 (for RHH or RHW-2), UL Standard 854(for USE-2), Federal Specification A-A-59544, and requirements of the NEC. Or other standards required by customers. Features 1.-40----90 2.Abrasion, high-Heat and Moisture and Sunlight Resistant. 3.VW-1 or higher required by UL. Applications 1. RHH or RHW-2 or USE-2 conductors are used with conduit as specified in the NEC. 2. May also be used as underground service entrance cable, for direct burial, at conductor temperatures not to exceed 90. 3. When used as RHH, conductor temperatures shall not exceed 90 in dry locations. 4. When used as RHW-2 or USE-2, conductor temperatures shall not exceed 90 in wet or dry locations. Package steel wooden reel, wooden reel, steel reel, in coils on wooden tray, or other requirements by customers.
Description of Steel storage rack 60"(Width)x24"(Depth)x72"(Height): It is also called movable rack. It can make the best use of the space of the warehouse under the condition which can not use the firm racks. Meanwhile, it can play its double function of the rack and package and make the high density of the warehouse. Reinforced steel tube frame.base with cross struts that can be picked up from any side. Heavy duty stacking racks shelves is widely used in various fields, like transporting, moving and storing with mechanized equipments. Size table of heavy duty stacking logistic racks & pallet shelves: Model Specification Capacity (kg) Length (mm) Width (mm) Height (mm) DY101 1350 1200 1200 1000 DY102 1350 1200 1400 1000 DY103 1450 1200 1200 1000 DY104 1450 1200 1400 1000 DY105 1550 1200 1200 1000 DY106 1550 1200 1400 1000
Portable CNC Flame Plasma Cutting Machine with Low Cost Brief: Portable cnc flame plasma cutting machine EagleTec EA-P1525FP has two torches, one flame and one plasma. Design of two torches in one machine is to meet production variety requirement. Depending on the materials, sometimes we need to use flame cutting, sometimes we need plasma cutting. This machine is a perfect combination of these two cutting ways. Two cutting torches can be switched arbitrarily according to need. A portable design enables the cnc flame plasma cutting machine can be moved to different locations as needed. The cutting wall thickness of this machine can range from 1.5 mm to 200 mm because of the combination of flame and plasma torch. This is a portable, low-cost cnc cutting machine with wide range of applications. Application: the portable cnc flame plasma cutting machine is applied to large, medium and small mining plants, automobile, shipbuilding, construction machinery and other fields, ideal for carbon steel, stainless steel and non-ferrous metal cutting.
Hollow Rivets Rivets Product NameHollow Rivets MaterialAluminum, copper, brass, stainless steel, steel, iron, alloy zinc etc. FinishPolishing; Anodize; Nickel, Zinc, Tin, chrome,Silver plating etc.It also can be environmentally friendly TypesOpen type rivet,sealed type rivet,multi-grip type rivet,peel type rivet,grooved type rivet,drive type and so on HeadRound head ,Flat head,Snap head ,and so on SurfaceFinished ,with colar ,polishing and so on Moq10000pcs Packing1.Inner-Plastic Bag; Outer -Standard Carton Box. 2. 1000 pcs in a plastic bag,1plastic bags into one carton, then 20cartons into one pallet 3.As your requirement,can be packed in wooden pallet too DeliveryWithin 15-20 workdays after d eposit or payment received Payment termsL/C, T/T Trade termsEXW,FOB,CFR,C IF StandardGB, DIN, JIS, BSW, AISI and ISO Production process:
Aluminum rivet Rivets Product nameAluminum rivet MaterialAluminum, copper, brass, stainless steel, steel, iron, alloy zinc etc. FinishPolishing; anodize; nickel, zinc, tin, chrome, silver plating etc.It also can be environmentally friendly TypesOpen type rivet, sealed type rivet, multi-grip type rive t, peel type rivet, grooved type rivet, drive type and so on HeadRound head , flat head, snap head , and so on SurfaceFinished , with colar , polishing and so on Moq10000pcs Packing1.Inner-plastic bag; outer -standard carton box. 2. 1000 pcs in a plastic bag, 1plastic bags into one carton, then 20 cartons into one pallet 3.As your requirement, can be packed in wooden pallet too DeliveryWithin 15-20 workdays after deposit or payment received Payment termsL/c, t/t Trade termsExw, fob, cfr, cif StandardGb, din, jis, bsw, aisi and iso Production process: Wire --- shank head --- rivet mandrel assemblypolishing-- final inspection packing --- delivery
Round head rivets Rivets Product nameround head rivets Materialaluminum, copper, brass, stainless steel, steel, iron, alloy zinc etc. Finishpolishing; anodize; nickel, zinc, tin, chrome, silver plating etc.It also can be environmentally friendly Typesopen type rivet, sealed type rivet, multi-grip type rivet, peel type rivet, grooved type rivet, drive type and so on Headround head , flat head, snap head , and so on Surfacefinished , with colar , polishing and so on Moq10000pcs Packing1.Inner-plastic bag; outer -standard carton box. 2. 1000 pcs in a plastic bag, 1plastic bags into one carton, then 20cartons into one pallet 3.As your requirement, can be packed in wooden pallet too Deliverywithin 15-20 work days after deposit or payment received Payment termsl/c, t/t Trade termsexw, fob, cfr, cif Standardgb, din, jis, bsw, aisi and iso Production process: Wire --- shank head --- rivet mandrel assemblypolishing-- final inspection packing --- delivery
Flat head rivet Rivets Product nameflat head rivet Materialaluminum, copper, brass, stainless steel, steel, iron, alloy zinc etc. Finishpolishing; anodize; nickel, zinc, tin, chrome, silver plating etc.It also can be environmentally friendly Typesopen type rivet, sealed type rivet, multi-grip type rivet, peel type rivet, grooved type rivet, drive type and so on Headround head , flat head, snap head , and so on Surfacefinished , with colar , polishing and so on Moq10000pcs P 2. 1000 pcs in a plastic bag, 1plastic bags into one carton, then 20cartons into one pallet  3.As your requirement, can be packed in wooden pallet too Deliverywithin 15-20 workdays after deposit or payment received Payment termsl/c, t/t Trade termsexw, fob, cfr, cif Standardgb, din, jis, bsw, aisi and iso Production process: Wire --- shank head --- rivet mandrel assembly polishing-- final inspection packing --- delivery
Grooved Type Blind Rivet Rivets Product Description Product NameGrooved Type Blind Rivet MaterialAluminum, copper, brass, stainless steel, steel, iron, alloy zinc etc. FinishPolishing; Anodize; Nickel, Zinc, Tin, chrome,Silver plating etc.It also can be environmentally friendly TypesOpen type rivet,sealed type rivet,multi-grip type rivet,peel type rivet,grooved type rivet,drive type and so on HeadRound head ,Flat head,Snap head ,and so on SurfaceFinished ,with colar ,polishing and so on Moq10000pcs Packing1.Inner-Plastic Bag; Outer -Standard Carton Box.� 2. 1000 pcs in a plastic bag,1�plastic bags into one carton, then 20�cartons into one pallet� 3.As your requirement,can be packed in wooden pallet too DeliveryWithin 15-20 workdays after deposit or payment received Payment termsL/C, T/T Trade termsEXW,FOB,CFR,CIF StandardGB, DIN, JIS, BSW, AISI and ISO
Countersunk rivetscountersunk rivets Rivets Product description Product namecountersunk rivets Materialaluminum, copper, brass, stainless steel, steel, iron, alloy zinc etc. Finishpolishing; anodize; nickel, zinc, tin, chrome, silver plating etc.It also can be environmentally friendly Typesopen type rivet, sealed type rivet, multi-grip type rivet, peel type rivet, grooved type rivet, drive type and so on Headround head , flat head, snap head , and so on Surfacefinished , with colar , polishing and so on Moq10000pcs Packing1.Inner-plastic bag; outer -standard carton box.� 2. 1000 pcs in a plastic bag, 1�plastic bags into one carton, then 20�cartons into one pallet� 3.As your requirement, can be packed in wooden pallet too Deliverywithin 15-20 workdays after deposit or payment received Payment termsl/c, t/t Trade termsexw, fob, cfr, cif Standardgb, din, jis, bsw, aisi and iso
