Linear alkyl benzene sulphonic acid.
Labsa, alkyl phenol ethoxylate, oxo alcohol ethoxylate, lauryldeaamide.
Washing powder, liquid detergent, dish wash, detergent cake, labsa 90%, labsa 96%, alpha olefin sulphonate(aos) liquid/paste/powder, sodium lauryl sulphate(sls) liquid/paste/powder, sodium lauryl ether sulphate(sles) liquid/paste/powder and detergent and washing powder grade chemicals and raw materials.
Aluminum phosphide, calcium carbide, calcium hypo chlorite, calcium lignosulphonate, caustic soda flakes, chloroacetic acid, chrome oxide green, citric acid, columnar activated carbon, dicyandiamide (DCDA), formic acid, glacial acetic acid, gum rosin, iron oxide, linear alkyl benzene sulphonic acid (LABSA), oxalic acid, paraffin wax.
Linear Alkyl Benzene (lab), Hab,Mek,Nmp,Sulfolane, Edc,.
Sles Labsa.
Ammonium Chloride, Sodium Dodecyl Benzene Sulfonate (sdbs) Labsna, Ferrous Sulfate, Dcp.
Para cresidine ortho sulphonic acid, labsa 90%.
Linear Alkyl Benzene Sulphonic Acid.
Linear Alkyl Benzene.
Sles, Labsa.
LABSA Chemical and Textile Auxiliaries.
Para amino azo benzene 4 sulphonic acid, 4 amino di-phenyle amine 2 sulphonic acid, tetrazene, pocur4.Exporter
Linear Alkyl Benzene Sulphonic Acid (LABSA) is a synthetic organic compound used primarily in the production of household and industrial detergents. It is an anionic surfactant with a structure derived from benzene and a linear alkyl chain, making it an effective cleaning agent and emulsifier. LABSA is valued for its ability to remove grease, oils, and stains from various surfaces and materials. It is also utilized in the formulation of liquid soaps, dishwashing liquids, and laundry detergents due to its foaming and cleaning properties. LABSA plays a crucial role in improving the cleaning efficiency of these products and is a key component in the cleaning and hygiene industry.
Chemicals 1. labsa 96% 2. labsa 90% 3. hcl 4. phosphoric acid 5. caustic soda liquid 6. caustic soda flakes 7. sulfuric acid 8. urea.Export
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
LAB, Linear Alkyl Benzene Texapon N70, Texapon 28%, Sodium Lauryl Ether Sulfate, SLES, LABSA, Linear Alkyl Benzene Sulfonic Acid.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
Chemical Like LABSA and SLES..
Petrochemicals like mixed xylene, phthalic anhydride, white spirit, lab, labsa.