Description The product is a technical advanced sensor of our new product series. It can automatically measure methane concentration within an area and transmit information in the form of standard electrical signal to the associated equipment. Application The product is compatible with various kinds of monitoring systems to achieve real-time gas sensing and detection.
Switch type motion sensor 360 degree sensing angle on the ceiling, 180 degree sensing angle on the wall. Available to use on ceiling and on wall. Auto , on , off mode selection by tri-state switch max 9m Detection height : 2, 8 m/1.5m Time adjustment : 10 sec.-5 min. Lux adjustment : 2-2000 lux Operating temperature:-20°c~+40°c Protection class: ip 20 / class ii Warranty : 3 years
Type : RTCS100B,RTCS200B,RTCS300B,RTCS400B,RTCS500B,RTCS600B, IPN Primary nominal input current : 100, 200, 300, 400, 500, 600 A IP Measuring range of primary current : 0~300, 0~600, 0~900, 0~900, 0~900, 0~900 A VOUT Nominal output voltage : 41%V VC Supply voltage : 15(5%) V IC Current consumption : VC=15V
Type : RTCS050EK1, RTCS100EK1, RTCS200EK1, RTCS300EK1, RTCS400EK1, RTCS500EK1 IPN : Primary nominal input current : 50, 100, 200, 300, 400, 500A IP Measuring range of primary current : 0~¡À100, 0~¡À200, 0~¡À400, 0 ~¡À600, 0~¡À800, 0~¡À1000 A VOUT Nominal output voltage : 4¡À1%V VC Supply voltage : ¡À12~¡À15(¡À5%)V 20 pcs/inner,200 pcs/CTN,14.5 KGS,40x25x30CM.
Compatibility: Nihon Kohden BSM-2301/3, 2351/3, Life Scope 12, BSM-4101,4103,4111,4113 Life scope P;BSM-5105,5135 Life scope A.
Working type: Inductive type Conductive type photoelectric type Mechnical type: General column type General corner column type General square column type Groove type. For detailed information please be free to contact us for PDF datasheets. Standard package.
Applications: H2,3,4 humidity and temperature transmitters are designed for environment monitoring and controlling in industrial, commercial and other buildings. These transmitters can be used for: Humidity and temperature monitoring of supply, exhaust and return air(H2, duct mount) Humidity and temperature monitering in critical environment such as outside air(H3, outside mount) Other applications of immersion humidity and temperature monitoring(H4, separate probe) Features: High performance digital sensors and circuits, ensure accurate measurement and temperature compensation Good long term stability and reliability 100% field changeable sensors, no re-calibration needed Fast response Multiple output signals selectable Industrial design, SS probe and sintered filter High protection rate to IP65 Specifications: Relative Humidity: Sensor: Capacitance polymer Range: 0~100%RH Output: 4~20mA /0~10VDC/RS485 Accuracy: 2%,3%RH(25ípC,20~80%RH) Hysteresis:
Precise angular-displacement sensor
GM Abs Speed Sensor Model: 15727017 Speed Sensor,Speed Sensors,Auto Speed Sensor,Vehicle Speed Sensor,ABS Wheel Speed Sensor,Wheel Speed Sensor,ABS Speed Sensor,Auto Sensor,Position Sensor,Electronic Sensor, Bearing Sensor,Shield Sensor Product Description: No: 108904 Name: GM Abs Speed Sensor O.E No: 15727017 Description: Shield Sensor specification: GM The ABS Speed Sensors provide speed information to auxiliary systems ABS to help calculate the distance covered. 1) Various models suited for HYUNDAI, such as Sensor ASSY-ABS FR Wheel RH, Sensor ABS FR Wheel LH, Sensor ABS RR Wheel RH, Sensor ASSY-ABS RR WH. We produce all kinks of GM Abs Speed Sensors.Such as 15703243 15727017 15233108 15991985 and so all. 2) Good quality and reasonably priced. Welcome to contact us if you need more information or have any specialized inquiry.
Polo Abs Speed Sensor Model: 6Q0 927 808 B Speed Sensor,Speed Sensors,Auto Speed Sensor,Vehicle Speed Sensor,ABS Wheel Speed Sensor,Wheel Speed Sensor,ABS Speed Sensor,Auto Sensor,Position Sensor,Electronic Sensor, Bearing Sensor,Shield Sensor Product Description: No:108805 Name:VW Abs Speed Sensor O.E No:6Q0 927 808 B Description:ABS Speed Sensor Front Left (FL) specification:Polo The ABS Speed Sensors provide speed information to auxiliary systems ABS to help calculate the distance covered. 1) Various models suited for VW, such as ABS Speed Sensor, ABS Speed Sensor Front Left (FL), ABS Speed Sensor Rear Left wheel. We produce all kinks of VW Abs Speed Sensors 6Q0 927 807 B 6Q0 927 803 B 6Q0 927 804 B 7H0 927 804 7H0 927 803 1K0 927 807 1K0 927 808 and so all. 2) Good quality and reasonably priced. Welcome to contact us if you need more information or have any specialized inquiry.
NH3 3E 100 Ammonia Sensor (NH3 Sensor) FEATURES * Amperometric 3 electrode sensor cell * Fixed organic gel electrolyte * No CO2 interference * 0 volt bias operation NH3 3E 100 Ammonia Sensor (NH3 Sensor) TYPICAL APPLICATIONS * TLV-monitoring, leakage detection * Fixed point applications in cold storages & refrigeration plants only * For other applications please use NH3 3E SE versions * No background concentrations of ammonia & alcohols NH3 3E 100 Ammonia Sensor (NH3 Sensor) TECHNICAL SPECIFICATIONS * Measuring Range: 0-100 ppm * Sensitivity Range: 90 nA/ppm ± 40 nA/ppm * Zero Current at 20 deg C: < ± 150 nA * Resolution at 20 deg C: < 2 ppm * Bias Potential: 0 mV * Linearity:
NO2-A1 Nitrogen Dioxide Sensor (NO2 Sensor) Description Alphasense Nitrogen Dioxide gas sensors operate using proven fuel cell technology. NO2-A1 Nitrogen Dioxide Sensor size: 20mm diameter, the industry standard size for portable gas detectors The NO2 range provides OEMs with reliable sensors for use in a number of high volume applications. Strong signal levels combined with low zero current allows resolution to 50 parts per billion (ppb) and an operating range to 20ppm. The sensors are suitable for use in fixed installation sensing heads, portable safety instruments, urban air monitoring and stack gas analysers. The NO2 sensors offer our electrolyte leak-free guarantee and reliable long-term detection performance. The leakproof housing is moulded with a colour coded top for ease of identification. NO2-A1 Nitrogen Dioxide Sensor (NO2 Sensor) Specifications * Range: 20 ppm NO2 limit of performance warranty * Sensitivity: -250 to -650 nA/ppm in 10ppm NO2 * Response time t90: < 50 (s) from zero to 10ppm NO2 * Resolution: < 0.02 RMS noise (ppm equivalent) * Temperature range : -20 to 50 deg C * Pressure range: 80 to 120 kPa * Humidity range: 15 to 90 % rh continuous * Weight: < 6 g
NH3-A1 Ammonia Sensor NH3 Sensor Description Alphasense is expanding its line of electrochemical toxic gas sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs. Ammonia (NH3) Our first family of Ammonia sensors. This sensor is designed for higher concentrations of Ammonia. Sensors for lower level detection are in development. NH3-A1 Ammonia Sensor NH3 Sensor Specifications * Range: 200 ppm NH3 limit of performance warranty * Sensitivity: 17 to 27 nA/ppm in 50ppm NH3 * Response time t90:
ETO-A1 Ethylene Oxide Sensor ETO Sensor Description Alphasense is expanding its line of Electrochemical Toxic Gas Sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs. Ethylene Oxide (C2H4O) The ETO is a general purpose sensor, primarily developed for monitoring Ethylene Oxide but also capable of measuring other volatile organic compounds (VOCs). Our toxic evaluation board allows easy adjustment of the bias voltage to optimise this sensor for the required application. See application note AAN113. Available in A and B series ETO-A1 Ethylene Oxide Sensor ETO Sensor Specifications * Range: 100 ppm EtO limit of performance warranty * Sensitivity: 2000 to 3200 nA/ppm in 20ppm EtO * Response time t90: < 150s from zero to 20ppm EtO * Resolution: < 0.1 RMS noise (ppm equivalent) * Temperature range: -30 to 50'C * Pressure range: 80 to 120kPa * Humidity range: 15 to 90% rh continuous * Weight: < 6 g
H2S-AE Hydrogen Sulfide Sensor (H2S Sensor) Description Alphasense Hydrogen Sulfide gas sensors operate using well-known fuel cell technology. H2S-AE Hydrogen Sulfide Sensor size: 20mm diameter, the industry standard size for portable gas detectors With very high sensitivity and low zero, accurate and stable readings are possible when measuring current concentration ranges from ppb to 1% H2S. H2S-AE Hydrogen Sulfide Sensor (H2S Sensor) Specifications * Range: 2,000 ppm H2S limit of performance warranty * Sensitivity: 65 to 110 nA/ppm in 400ppm H2S * Response time t90: < 25 (s) from zero to 400ppm H2S * Resolution: < 0.5 RMS noise (ppm equivalent) * Temperature range: -30 to 50 'C * Pressure range: 80 to 120 kPa * Humidity range: 15 to 90 % rh continuous * Weight: < 6g
CO-BM Carbon Monoxide Sensor (CO Sensor) Description Alphasense Carbon Monoxide gas sensors operate using proven fuel cell technology. CO-BM Carbon Monoxide Sensor sizes: 32mm diameter package, the best choice for fixed site applications The Alphasense family of CO sensors have proven themselves in the field with long term stability and reliable operation, well beyond the two-year warranty, using our patented electrode technology. CO-BM Carbon Monoxide Sensor (CO Sensor) Specifications * Range: 5,000 ppm limit of performance warranty * Sensitivity: 80 to 130 nA/ppm in 400ppm CO * Response time (t90): < 25 (s) from zero to 400ppm CO * Resolution: < 0.5 RMS noise (ppm equivalent) * Temperature range: -30 to 50'C * Pressure range:80 to 120KPa * Humidity range: 15 to 90 % rh continuous * Weight: < 13g
CO-AF Carbon Monoxide Sensor (CO Sensor) Description Alphasense Carbon Monoxide gas sensors operate using proven fuel cell technology. CO-AF Carbon Monoxide Sensor (CO Sensor) sizes: 20mm diameter, the industry standard size for portable gas detectors The Alphasense family of CO sensors have proven themselves in the field with long term stability and reliable operation, well beyond the two-year warranty, using our patented electrode technology. CO-AF Carbon Monoxide Sensor (CO Sensor) Specifications * 20mm diameter * Sensitivity: 55 to 90nA/ppm in 400ppm CO * Response time t90: < 25s from zero to 400ppm CO * Resolution: < 0.5 RMS noise (ppm equivalent) * Range: 5,000ppm CO limit of performance warranty * Temperature range: -30 to 50'C * Pressure range: 80 to 120kPa * Humidity range: 15 to 90% rh continuous Matched Transmitter board for CO-AF CO Sensor 4-20 mA Digital Transmitter Board * Factory calibration, custom-set for immediate use * Digital zero, sensitivity and temperature compensation * Digital and 4-20mA output * Biased or unbiased operation * Calibration and range change
CO-AM Carbon Monoxide Sensor (CO Sensor) Description Alphasense Carbon Monoxide gas sensors operate using proven fuel cell technology. CO-AM Carbon Monoxide Sensor sizes: 20mm diameter, the industry standard size for portable gas detectors The Alphasense family of CO sensors have proven themselves in the field with long term stability and reliable operation, well beyond the two-year warranty, using our patented electrode technology. CO-AM Carbon Monoxide Sensor (CO Sensor) Specifications * Range: 5,000 ppm CO limit of performance warranty * Sensitivityâ??: 55 to 90 nA/ppm in 400ppm CO * Response time t90: < 25 (s) from zero to 400ppm CO * Resolution: < 0.5 RMS noise (ppm equivalent)â?? * Temperature range: -30 to 50'C * Pressure range: 80 to 120kPa * Humidity range: 15 to 90% rh continuous * Weight: < 6 g
H2S-A1 Hydrogen Sulfide Sensor H2S Sensor Description Alphasense Hydrogen Sulfide gas sensors operate using well-known fuel cell technology. H2S-A1 Hydrogen Sulfide Sensor size: 20mm diameter, the industry standard size for portable gas detectors With very high sensitivity and low zero, accurate and stable readings are possible when measuring current concentration ranges from ppb to 1% H2S. H2S-A1 Hydrogen Sulfide Sensor H2S Sensor Specification * Range: 100ppm H2S limit of performance warranty * Sensitivity: 550 to 875 nA/ppm in 20ppm H2S * Response time t90: < 35s from zero to 20ppm H2S * Resolution: < 0.05 RMS noise (ppm equivalent) * Temperature range: -30 to 50'C * Pressure range: 80 to 120 kPa * Humidity range: 15 to 90 % rh continuous * Weight: < 6 g Matched Transmitter board for H2S-A1 H2S Sensor 4-20 mA Digital Transmitter Board * Factory calibration, custom-set for immediate use * Digital zero, sensitivity and temperature compensation * Digital and 4-20mA output * Biased or unbiased operation * Calibration and range change
Dexcom G5 Sensor with no patch, new Sensor and Transmitter - a slim sensor continuously measures glucose levels just beneath the skin and sends data wirelessly to a display device through a transmitter.