Specifications: Characteristics Cetane number (4) Cetane Index (4) Density at 15C Polycyclic aromatic hydrocarbons (6) Sulphur content UNITS kg/m' % m/m mg/kg LIMITS minimum 51,0 minimum 46,0 820 to 845 (5) maximum 8 maximum 10 TEST METHODS EN STANDRADS EN ISO 5165 EN 15195 EN ISO 4264 EN ISO 3675 EN ISO 12185 EN 12916 EN ISO 20846 EN ISO 20884 UNE STANDARDS UNE-EN ISO 165 UNE-EN 15195 UNE-EN ISO 4264 UNE-EN ISO 3675 UNE-EN ISO 12185 UNE-EN 12916 UNE-EN ISO 20846 UNE-EN ISO 20884 ASTM STANDARDS D 613 D 4737 D 4052 D 1298 Distillation (7): 65 % V/V collected 85 % V/V collected 95 % V/V collected cc C cc minimum 250 maximum 350 maximum 360 EN ISO 3405 UNE-EN ISO 3405 D 86
Each Original Can-Filter uses the most conceptually sound, pelletized carbon, packed-bed design to deliver the best performing carbon filter on the market. Even with the industryâ??s thickest carbon bed, at 2.5 in, the Can Original provides for some of the lowest pressure drops, even on smaller size filters. This hefty pelletized carbon bed effectively makes the Original filter the â??biggest spongeâ?? for VOC removal capable of holding massive amounts of contaminant leading to a lifespan that leaves other filters, frankly, in the dust. The Original Can-Filter is designed for the control of VOCs (paint fumes, hydrocarbons, etcâ?¦), odors, and other gaseous contaminants. Built with the same proven packed bed design and pelletized virgin activated carbon Can Fan has used for 30 years, this line of time-tested activated carbon air filters sets the standard for long life, consistent performance, and low-pressure drop. Rated at a conservative 0.1 sec contact time, the Original Can-Filter provides excellent value and confidence. Activated carbon filters are the best way to eliminate most VOCs, gasses, and odors from the air. Combined with a fan in a ventilation system, 99.9% of noxious odors can be trapped inside the filter for good.
Gilsonite is a natural, resinous hydrocarbon. This natural asphalt or Natural bitumen is similar to hard petroleum asphalt and is often called a natural asphalt, asphaltite, uintaite, or asphaltum. Gilsonite is soluble in aromatic and aliphatic solvents, as well as petroleum asphalt. Due to its unique compatibility, Gilsonite is frequently used to harden softer petroleum products. Gilsonite in mass is a shiny, black substance similar in appearance to the mineral obsidian. It is brittle and can be easily crushed into a dark brown powder. Gilsonite is found below the earth's surface in vertical veins or seams that are generally between two and six feet in width, but can be as wide as 28 feet. The veins are nearly parallel to each other and are oriented in a northwest to southeast direction. They extend many miles in length and as deep as 1500 feet. The vein will show up on the surface as a thin outcropping and gradually widen as it goes deeper. Due to the narrow mining face, Gilsonite is mined today, much like it was 50 or 100 years ago. The primary difference is that modern miners use pneumatic chipping hammers and mechanical hoists. 4
Description: 13X type molecular sieve, also called NaX or NaA type molecular sieve,is one type of aluminosilicate crystal with average pores measuring of 9angstrom(0.9nm).It has good mass transfer rates. And is commonly used to separate nitrogen from oxygen. Chemical Molecular Formula: Na2OAl2O3(2.8±0.2) SiO2(6~7)H2O. (SiO2:Al2O32.6-3.0). Technical Parameter: Properties Unit Bead Cylinder Diameter mm 1.6-2.5 3.0-5.0 1.6 3.2 mesh/inch 8*12 4*8 1/16 1/8 Bulk density g/ml 0.64 0.64 0.61 0.61 Crushing strength N/pce 30.0 70.0 30.0 50.0 Size ratio up to grade wt% 98.0 98.0 96.0 96.0 Static H2O adsorption wt% 25 25 25 25 Static CO2 adsorption wt% 17.0 17.0 17.0 17.0 Package Moisture wt% 1.5 1.5 1.5 1.5 Wear ratio wt% 0.2 0.2 0.40 0.40 Application: Remove CO2 and moisture,gas purification in air separation unit. Drying and desulfurization of natural gas, liquefied petroleum gas, and liquid hydrocarbons. Deeply drying for general gas Bulk industrial oxygen in PSA units. Desulfurization (sweetening) of natural gas and other fluids
Petroleum is a naturally occurring, yellowish-black liquid found in geological formations beneath the Earth's surface. It is commonly refined into various types of fuels. Components of petroleum are separated using a technique called fractional distillation, i.e. separation of a liquid mixture into fractions differing in boiling point by means of distillation, typically using a fractionating column. It consists of naturally occurring hydrocarbons of various molecular weights and may contain miscellaneous organic compounds. The name petroleum covers both naturally occurring unprocessed crude oil and petroleum products that are made up of refined crude oil. A fossil fuel, petroleum is formed when large quantities of dead organisms, mostly zooplankton and algae, are buried underneath sedimentary rock and subjected to both intense heat and pressure. Petroleum has mostly been recovered by oil drilling (natural petroleum springs are rare). Drilling is carried out after studies of structural geology (at the reservoir scale), sedimentary basin analysis, and reservoir characterisation (mainly in terms of the porosity and permeability of geologic reservoir structures) have been completed. It is refined and separated, most easily by distillation, into numerous consumer products, from gasoline (petrol) and kerosene to asphalt and chemical reagents used to make plastics, pesticides and pharmaceuticals. Petroleum is used in manufacturing a wide variety of materials, and it is estimated that the world consumes about 95 million barrels each day.
Technology Introduction: We offer complete package solutions for chemical distillation plant/distillation design/distillation tailoring using all-component analysis, process simulation, and a process automation package. Moreover, we also provide corresponding chemical sewage treatment solutions to satisfy the customers. Chemical distillation plant/distillation design is our core competitiveness, we have engineering experiences in phenolic distillation plant, methanol-DMC distillation plant, coarse methanol distillation plant, fusil oil distillation plant, mixed aromatic distillation plant, light hydrocarbon distillation plant, acetate distillation plant (incl. methyl acetate, ethyl acetate, butyl-acetate and amyl-acetate) methylal distillation plant and dilute formalin enrichment plant. Technical Features: Our Capability in Distillation Design Software â?¢ Partner We have been cooperating with Tianjin University to establish a joint distillation engineering technology research center, which is mainly specialized in advanced distillation technologies, process control and troubleshooting.
NAP-66A is mainly used for gas detectors and leak testers. NAP-66A is a half in height and needs a half in power consumption compared to existing sensor so that thinner and lighter-weight detectors can be produced. The following are the basic characteristics but it is recommended to refer to the individual users manual for further information. * Target gases and concentration Propan(C3H8): 0.03~ 2.2% (0.03~ 1%) Iso-butane(Iso-C4H10): 0.03~ 1.8% (0.03~ 0.8%) Hydrogen(H2):0.05~ 4% (0.05~ 1.5%) Ethanol(C2H5OH): 0.05~ 3.2% (0.05~ 1.5%) Hydrocarbons(CnH2n+2): 1~100% LEL (1~50%LEL) ( ) is a detection range in high accuracy * Ratings Supply Voltage: DC 2.0 ± 0.2V AC 2.0 ± 0.2V (r.m.s. 50~60Hz) Current (When 2.0V is applied): DC 140 ~ 160mA AC 140 ~ 160mA (r.m.s. 50~60Hz) Ambient Temperature: In operation -10 ~ +50 In storage -10 ~ +50 Ambient humidity: In operation 95ï¼?RH or less In storage 99ï¼?RH or less (No dew condensation)
Key Features: 1.Measurement range 0 ?? 1 bar 2.Static operating pressure 25 bar 3.Diaphragm and sealing of Viton 4.Operating voltage 24 V DC/AC 5.Output signal 4-20 mA square rooted 6. 3 ½-digit LED display 7.ECCN: N AL: N 8.Robust design with high repeatability 9.Over pressure protection 10.Wear free non-contact LVDT sensing element, thus no maintenance 11.Signal output with possibility of various characteristic curve 12.Characteristic conversion of output via3?¦.30 entries table 13.Complete set-up of all parameters and print out by using optional PC programming interface EU03 Applications areas: 1.Volume flow monitoring of lubricants oil, mill oil 2.Gearbox lubricant flow monitoring 3.Flow measurement ?? lubricants, oil, hydrocarbons, water, gases Industrial areas: 1.Cement plants 2.Nuclear plants, coal or gas fired power plants 3.hydro power plants 4.Manufacturing and chemical plants
Continuous waste plastic pyrolysis plant is an industry that converts waste plastic & tires & rubber and other waste materials into Pyrolysis Oil, Carbon Black & Hydrocarbon Gas. www(dot)china-doing(dot)com Continuous waste plastic pyrolysis plant can reduce the volumes of the waste products and help human protect the environment. And the plastic has been one of the most common materials since the beginning of 20th century because of its durability, low cost and light weight. Plastic makes up around 30% of all rubbish collected. This includes plastic bottles, containers, plastic wrap, packaging, electronic goods, car body parts, etc. Because the plastic is slow to degrade, this kind of waste becomes a problem for many people. As we all know, plastics are not only pollute the lands, waterways and oceans, but also affect the marine animals and humans, leading to the metabolic disturbance. So, solving the plastic pollution has become the imminent thing and is the primary task for people.www(dot)china-doing(dot)com
Waste plastic to oil machine cost can pyrolysis down of waste plastic to energy. Plastic pyrolysis to oil machine is an industry conducted pyrolysis . In the Scrap plastic pyrolysis to oil machine , the long- chain polymers break down into smaller chains of hydrocarbon gases and pyrolysis oils. Heat required for the catalytic reaction .www(dot)wastetireoil(dot)com Every year a large amount of plastic waste is discarded in the Earth. These plastic to with stand the natural process of decomposition of all. According to statistical analysis , Waste plastic generated more than 250 million tons each year. A lot of these plastic garbage is used to fill the land , which in turn may result in a waste land to create a major threat to the environment in the future. People use and dump waste plastics almost every day. Waste plastic to oil Solution: Waste plastic to oil machine cost www(dot)wastetireoil(dot)com Usage: Waste plastic Recycling to Fuel Oil Input: Different plastic type, (PP,PE,PS,ABS) etc. Output: 20%-95% fuel oil, 30%-35% carbon black , 5%-8% gas. Heating material: coal/wood/fuel oil/natural gas Machine cover area: usually 400 square meters. Reactor material: Q245R Boiler plate.
Iaq_100 p package 110-801 15x15 indoor air quality sensor 100 ppm p package 110-801 Description Spec sensors' iaq_100 is a screen printed electrochemical sensor component specifically designed for the broad detection of gases associated with poor air quality: sulfides, alcohols, ammonia, odorous gases, and carbon monoxide. Benefits * zero power sensor Sensor circuit - < 10 uw max * cold operation - no heating required * rugged design- not poisoned by sulfides, chlorides, nh3 * stable response - not affected by humidity, co2, n2, ar, most saturated hydrocarbons, hexane * small size& low profile - 20x20x3 mm * sensitive - in the ppm range * easy to use - linear response * long life - 10 years expected life * fast response - < 20 seconds * rohs compliant Applications * bad air quality detection * indoor air monitor * air purifier controls * weather stations * internet of things * smart homes * early fire detection * leak detection * hvac ventilation control
Scope Vapor pressure of liquefied petroleum gas analyzer used by GB/T6602-89 "Determination of vapor pressure liquefied petroleum gas (LPG Act)" under certain pressure meter and 37.8 ~ 70ºC temperature test to measure the vapor pressure of liquefied petroleum gas ( gauge pressure). The instrument applies to a boiling point above 0ºC, hydrocarbon content of less than 5% in 37.8ºC, the vapor pressure of not more than 1550Kpa LPG Features 1. With integrated design, easy operation and maintenance; 2. With PID Temperature control, high precision, stable; 3. With automatic chronograph, alarm system ; 4. With dual elastic results, easy to operate parallel experiments; 5. Level playing automatically using the vapor pressure of vibration and improve test precision, reduce labor intensity Technical Parameters 1. Power: AC220V ± 10% 50Hz 2. Input power: 0 ~ 1500W 3. Ambient temperature: room temperature ~ +30 °C 4. The output power: constant Heating method: 1000W Motor: 25W 5. Temperature control Precision: 37.8 °C± 0.1 °C 6. The pressure range: 0 ~ 200kpa gauge 7. Sensor: Ptl00 8. The instrument automatically rotating angle of 350 °
Jin lin coal column activated carbon is widely used in toxic gas purification, gas processing, industrial and domestic water purification treatment, solvent recovery and so on. A, gas cleaning coal column activated carbon; synthesis gas used in chemical raw material gas, chemical industry, pharmaceutical industry, gas drinks with carbon dioxide and hydrogen, nitrogen, chlorine, hydrogen chloride, ozone, b hydrocarbon, ethane, butane, cracking gas and inert gas purification and atomic facilities such as the purification of exhaust gas, etc. Also used for removing the pollutants in the air, and the separation and purification of mixed gas. Can also be used for gas masks and protective equipment disinfection filtration, etc. Five, purifying water coal column activated carbon; made of selected high quality bituminous coal as raw materials refined but become, the adsorption quantity, wide range of adsorption. Mainly used in city life drinking water, tap water, pure water, distilled water, ultrapure water filling equipment of production and the dechlorination, oil removal purification, and various kinds of industrial sewage purification treatment.
Name:api610 bb5 multistage barrel pumps Characteristics Radially split, horizontal multistage centrifugal pump Centerline mounted Diffuser casing Single / double suction, enclosed impeller thrust compensation by balance drum or rotor design with opposed impellers available top-top nozzle arrangement Materials of construction per api 610, Other materials on request Design features Heavy duty process design according to api 610 latest edition (bb5 type) Ring oil lubrication, other methods Of lubrication available Cartridge pull out design available Sleeve / tilt pad bearings design available replaceable wear rings for casing and impeller alternate nozzle arrangements available Fan cooling available Special design for decoking service available low npsh double suction design available Operating limits Capacity up to 2, 000 Head up to 4, 572 m Discharge flange size 2 to 12 in max. Pressure 30mpa Temperature 450 Applications Hydrocarbons chemical solutions water Seawater Decoking jet service charge pumps descaling service pumps
Section ix code qualified welders for Api applications Fabrications designed in accordance with ped (pressure equipment directive) and national standards when required Wide range of hydraulic designs To suit all applications Choice of bearings and mechanical seals pump mounted thrust bearing when required tank or sump mount options available Operating limits Capacity to 25, 000 , head to 1, 500 m Pressure to 15mpa Applications Condensate Power plants municipal hydrocarbons Pipeline Refineries Molten salt applications Characteristics Double suction first stage available Stage impeller Over 700 vertical ruhrpumpen pump hydraulics can be used for construction Integral fabricated column support bearings collet or ring and key impeller mounting One-piece shaft construction for shaft Lengths to 6 m (20 ft) Rigid 4-piece coupling Single or double suction first stage Single stage or multistage available Nozzles are available with the suction In the head or barrel Design features Api 610 latest edition construction available (vs6 type) Fabrications manufactured using asme
Our Production technology and methods: We introduced Chevron Lummus Global LLC-FINISHING @technology along with its Nobel-Metal catalyst for high quality white mineral oil production within Asia-Pacific area since 2008, now KWYL has a white mineral oil refinery wiith a capacity of 200,000mt/a to supply all kinds of high quality white mineral oil for our customer. Tianjin Kaiwei Yongi United Chemical Co.,ltd 's White Mineral Oils are produced from highly pure paraffinic base oils through the newest refining process--- chevron Lummus Global LLC .have predominant number of saturated paraffinic hydrocarbons,60N,70N, 100N, 150N,220N,380N,600N. Food Grade Pharmaceutical Grade Animal Vaccine Cosmetic Grade Technical Grade CAS NO.8042-47-5 EINECS NO.232-455-8 H.S.CODE:27101993 CERTIFICATE:USP,NSF,FDA ,HALA,KOSHER,ISO9001 ,REACH Appearance Colorless,Odorless,Tasteless/ transparent oil does no harm to the human body . without any additives, water or mechanical impurities, which is lubricating, raction, obtained from petroleum, that has been deeply refined. It possesses excellent antioxidation, chemical ,abrasive resistance and light stability.
BioSafe4U - Stain Remover uses a very powerful proprietary hydrocarbon release agent with proven ability to remove protein, urine, fecal matter and all organic contaminants. It contains no phosphates, enzymes, nitrates, sulfonates, sulfates, caustic or any other known pollutants. Work best with brief dwell time of 10 to 15 minutes. Increase agitation using bristle brush. Non Corrosive Non Fuming Non Hazardous Safe On Skin 100% Biodegradable Safe To Use, Store and Dispose Environment Friendly Product BioSafe4U - Stain Remover removes your stubborn stains without damaging or decoloured your favorite fabrics. Can use on all type of materials. Application Best result when removing dried blood stain using BioSafe4U stain remover. You may use it for other stains such as dark soy sauce, tomato & chilli sauce, coffee, milk & yogurt. No harm try removing stains in your oven too. Safe No Bleaching Chemical No Hydrogen Peroxide
Scope Petroleum products copper corrosion tester for gb / t5096, iso2160, astm d130, ip154 "petroleum products copper corrosion test method" determination of aviation gasoline, jet fuel, motor gasoline or has reye's vapor pressure of not more than 124kpa (900mmhg) other hydrocarbons, solvent oil, diesel oil, distillate fuel oil, lubricants and other petroleum extent of corrosion products on the copper. Features 1, the operating parameter set with the keyboard. 2, intelligent control system, touch the button to set, high brightness lcd dot matrix english display. 3, the test bath with accurate temperature control of the metal bath, completely avoid evaporation of water bath and oil bath arising inconvenience. 4, copper corrosion test time can be set and alarms. 5, measurement and control system has a self-diagnostic function. Technical parameters 1, the metal bath thermostatic control range: 40-200 ?, 2, temperature accuracy: ± 0.2 ? 3 heating power: 1200w 4, metal thermostatic bath can withstand the test pressure 0.7mpa. 5, automatic timing: 0-599min (keyboard settings, increment 1 min) 6, the test bath: to place the three trials and three test tubes elastomer simultaneously
Liquefied petroleum gas or liquid petroleum gas (LPG or LP gas), also referred to as simply propane or butane, are flammable mixtures of hydrocarbon gases used as fuel in heating appliances, cooking equipment, and vehicles. It is increasingly used as an aerosol propellant and a refrigerant replacing chlorofluorocarbons in an effort to reduce damage to the ozone layer. When specifically used as a vehicle fuel it is often referred to as autogas. Varieties of LPG bought and sold include mixes that are mostly propane (C 3H 8), mostly butane (C 4H 10), and, most commonly, mixes including both propane and butane. In the northern hemisphere winter, the mixes contain more propane, while in summer, they contain more butane. Mainly two grades of LPG are sold: commercial propane and HD-5. These specifications are published by the Gas Processors Association (GPA) and the American Society of Testing and Materials (ASTM). Propane/butane blends are also listed in these specifications. Propylene, butylenes and various other hydrocarbons are usually also present in small concentrations. HD-5 limits the amount of propylene that can be placed in LPG to 5%, and is utilized as an autogas specification. A powerful odorant, ethanethiol, is added so that leaks can be detected easily. The internationally recognized European Standard is EN 589. LPG is prepared by refining petroleum or "wet" natural gas, and is almost entirely derived from fossil fuel sources, being manufactured during the refining of petroleum (crude oil), or extracted from petroleum or natural gas streams as they emerge from the ground. It was first produced in 1910 by Dr. Walter Snelling, and the first commercial products appeared in 1912. It currently provides about 3% of all energy consumed, and burns relatively cleanly with no soot and very few sulfur emissions. As it is a gas, it does not pose ground or water pollution hazards, but it can cause air pollution. LPG has a typical specific calorific value of 46.1 MJ/kg compared with 42.5 MJ/kg for fuel oil and 43.5 MJ/kg for premium grade petrol (gasoline). However, its energy density per volume unit of 26 MJ/L is lower than either that of petrol or fuel oil, as its relative density is lower (about 0.5 - 0.58 kg/L, compared to 0.7- 0.77 kg/L for gasoline).
WHITE MINERAL OIL PARAFFIN OIL skype:alicexfu2006 CAS NO. 8042-47-5 EINECS NO.232-455-8 FOOD GRADE PHARMACEUTICAL GRADE ANIMAL VACCINE COSMETIC GRADE TECHNICAL GRADE Special oil is according to customer's request to produce it. CERTIFICATE:NSF,FDA ,HALA,KOSHER,ISO9001 ,REACH Highly pure paraffinic base oils through the newest refining process--- chevron Lummus Global LLC .have predominant number of saturated paraffinic hydrocarbons,60N,70N, 100N, 150N,220N,380N,600N. Liquid Paraffin are produced from highly pure paraffinic base oils through the newest process,have predominant number of saturated paraffinic hydrocarbons. All are highly refine food grade and pharma grade white mineral oils that meets or exceeds USP,NSF,FDA CERTIFICATE direct and indirect food&pharma contact application. MAIN VISCOSITY FROM No.5 to No.55,sued for FOOD,COSMETIC AND PHARMA... TYPICAL PROPERTIES OF GRADE A WHITE MINERAL OIL 5 7/7c 9/9c 10 13/13c 15 18 22 35 38s 38 55 Vis. 40 °C cst 7.7 12.0 15.6 22.1 26.2 33.4 36.0 48.0 67.1 72.6 76.0 100.5 Vis. 100 °C cst 2.3 3.0 3.5 4.4 4.9 5.6 5.9 7.1 9.1 8.1 9.9 11.9 Vis. 100 °F SUS 52 72 85 114 133 172 182 247 344 380 390 520 Vis. 210 °F SUS 34 37 39 42 43 45 46 50 60 62 63 67 Usage: 1.Focus on animal vaccine/feed,tobacco field etc. 2.Pharmaceutical chemical products and field,Health care.grease. 3.Reflect deep treatment ability of this unit. 4.The series are applicable for the industrial raw materials of cosmetics to make hair cream, hair oil, lipstick, skin care grease. 5.Designed for polymer production field,UniPO series could better respond polymer process need. 6.Focus on some non-highly required process,quality stability 7. Food field , like excellent antioxidation and stability. 8. Machine lubrication in food and textile industry. Lamp oil is a good quality with smokeless and odorless.