Chemical Name: Zine salt of 2-mercaptobenzimidazole Specification: Item Powder Oiled powder Appearance White powder Initial M.P. �¿C â?¥ 240.0 240.0 Loss on drying % â?¤ 0.50 0.50 Zinc content % 18.0-20.0 18.0-20.0 Residues on 150�¼m sieve, % â?¤ 0.50 0.50 Additive, % -- 1.0-2.0 Properties: White powder. No smell but taste bitter. Soluble in acetone, alcohol, insoluble in benzene gasoline and water. Application: Applications A non-staining secondary antioxidant for NR, CR, SBR, NBR, EPR, etc. Especially effective against heat oxidation in combination with amine. Could be used alone or combined with the anti-degradants, such as DNR or AP. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Chemical Name: 2,2'-methylenebis(4-methyl-6-tertbutylphenol) Specification: Item Index Appearance White powder Purity,% â?¥ 99.0 Initial Melting pointoCâ?¥ 125.0 Heating loss, % â?¤ 0.50 Ash % â?¤ 0.10 Residues on 150�¼m sieve, % â?¤ 0.20 Properties: White, grey-white to slightly yellow powder, low volatility, steam pressure 2mm/Hg columniation (160oC). In rubber, solubility exceeds2%, in organic impregnant (such as carbinol, Alcohol, Benzene, Acetone, Ethyl acetate, Chloroform) it can well dissolve. Because of the hindered phenolic structure, its chemical character is not lively. In storage it can keep stable conditions. It will appear slightly red after long storage, but have no effect on antioxidant. Application: It can be used as antioxidant in natural rubber, latex, synthetic latex, as well as kinds of plastic products. Also in oil products and fattiness food, it can act suitable antioxidant. This product has low toxicity and volatility, no pollution coloration to the applied products. It's a widely applied hindered phenolic antioxidant. Packaging: 20kg plastic woven bag, paper with plastic film bag.
Chemical Name: 2-4-Morpholinodithio benzothiazole Specification: Item Powder Oiled powder Granule Appearance Light yellow powder(granule) Initial M.P. �¿C â?¥ 125.0 125.0 125.0 Loss on drying % â?¤ 0.30 0.50 0.30 Ash % â?¤ 0.30 0.30 0.30 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 1.50 Properties: Light yellow powder (granule).Density is 1.51g/m3.Soluble in chloroform, partly soluble in CS2,acetone,insoluble in Sherwood oil, benzene, alcohol and water. Application: Fast-curing primary or secondary accelerator for Nr, SBR, Nitrile and EPDM. Less scorch, blooming and good processing safety. Can be used in CR as an anti-scorching agent. The efficiency sulphur content is 11%. Packaging: 25kg plastic woven bag , paper with plastic film bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1year.
Chemical Name: Tetramethyl thiuram monosulfide Specification: Item Powder Oiled powder Granule Appearance Yellow powder(granule) Initial M.P. �¿C â?¥ 105.0 105.0 105.0 Loss on drying % â?¤ 0.30 0.40 0.30 Ash % â?¤ 0.30 0.40 0.30 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 1.0-3.0 Properties: Yellow powder(granule). Ordorless and non-toxic. The density is 1.37--1.40. Soluble in chloroform, acetone, CH2CL2, CS2, benzene, toluene, partly soluble in alcohol and diethyl ether, insoluble in water and gasoline. Application Generally used as a secondary accelerator or as a booster for sulphenamides to achieve faster cure rate. Distinguished by very good processing safety in comparison with other thiurams, high curing activity and no discoloration. No cure actinty in the absence of added elemental sulphur. An excellent accelerator for polychloroprene in association with Accelerator DPG and Sulphur. Its critical temperature is 121 �¿C . Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Chemical Name: 2-Mercaptobenzimidazole Specification: Item Powder Oiled powder Appearance White powder Initial M.P. �¿C â?¥ 290.0 290.0 Loss on drying % â?¤ 0.30 0.40 Ash % â?¤ 0.30 0.40 Residues on 150�¼m sieve, % â?¤ 0.10 0.10 Additive, % \ 1.0-2.0 Properties: White powder. No smell but taste bitter. The density is 1.42. Soluble in alcohol, acetone and ethyl acetate, Slightly soluble in petroleum ether, CH2CL2, Insoluble in CCL4, benzene and water. Good stabilization stroge ability. As second anti-degradant without poison. Application: A non-staining secondary antioxidant for natural rubber, CR, SBR, NBR and EPR, etc. Especially effective against heat oxidation in combination with amine. Packaging: 25kg; plastic woven bag, paper with plastic film bag, kraft paper bag. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Chemical Name: Dibenzothiazole disulfide Specification: Item Powder Oiled powder Granule Appearance Gray-white or light yellow powder(granule) Initial M.P. �¿C â?¥ 167.0 167.0 167.0 Loss on drying % â?¤ 0.30 0.50 0.30 Ash % â?¤ 0.30 0.30 0.30 Residues on 150�¼m sieve, % â?¤ 0.10 0.50 -- Additive, % -- 1.0-2.0 -- Granule Diameter, mm -- -- 1.50 Properties: A little bitter taste. Specific gravity: 1.45--1.54. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than Accelerator MBT. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Keep all hair types happy and looking more healthy with our RVL Ultra Refining Shampoo, which cleanses, moisturizes and conditions while lubricating hair for a static-free, soft and smooth finish. RVL Ultra Refining Shampoo contains shikakai, fenugreek and flaxseed oil and glycerin to help pull moisture to dry hair and restore your hairs ideal look. Mindfully developed with botanicals, vitamins and minerals, this gentle shampoo is free of parabens, sulfates, silicones and dyes. SIZE: 8 oz. bottle BENEFITS Adds weightless volume Removes oil and dirt Promotes fuller-looking hair Moisturizes and conditions Lubricates hair for a soft and smooth look Anti-static, fights frizz and flyaways Pulls moisture to dry hair Renews the appearance of hair s bounce and body Recommended for all hair types INGREDIENTS Water, Sodium C14-16 Olefin Sulfonate, Polysorbate 80, Cocamidopropyl Betaine, Glycerin, Sodium Cocoamphoacetate, Fragrance, Benzyl Alcohol, Glycolic Acid, Disteareth-75 IPDI, Linum Usitatissimum (Linseed) Seed Extract, Polyquaternium-10, Cocamidopropyl Hydroxysultaine, Propanediol, Sodium Hydroxide, PEG-7 Caprylic/Capric Glycerides, Tetrasodium EDTA, Tocopheryl Acetate, Zinc PCA, Dehydroacetic Acid, Acacia Concinna Fruit Extract, Trigonella Foenum-Graecum Seed Extract, Yeast Extract, Maltodextrin.
Ecominim Glass and Multi Surface Cleaner - Skye Fresh Formulated without any harsh or corrosive ingredients, this alcohol-free cleaner can be used on multiple surfaces including stainless steel, aluminum, wood, porcelain, and tiles. Scent: Skye Fresh Volume: 500ML Price: RM 16.90 Country of origin: Malaysia Minimum Order Size: 1 tonne Packaging details: Recyclable carton Efficacy Especially effective on stubborn water stains, grease, dust, and soap scum. Non-corrosive on aluminum and alloy. Product characteristics - Low suds - Gentle enough for sensitive skin - Derived from plant-based, biodegradable ingredients. - Contains citric acid, a natural preservative commonly found in food - No dyes, coloring, parabens, phosphates, or phthalates. - Uses BPA-free reusable plastics Directions Spray on dry surfaces and wipe with a dry lint-free cloth or old newspaper. EcoMINIM eco tip For best results wipe mirrors and glass surfaces with old newspapers. For stubborn stains, spray, leave on for a few minutes and scrub or wipe with a damp cloth. Ingredients decyl glucoside (plant-based, non-ionic surfactants), water, citric acid (natural preservative), glycerine and sodium citrate (Plant-based chelating agent); perfume, no colouring
PRODUCT DESCRIPTION Patchouli Oil is obtained by steam distillation from the leaves of Pogostemon cablin benth. PRODUCT NAME Common Name : Pacthouli Oil Botanical Name : Pogostemon cablin benth Indonesia Name : Minyak Nilam PART USED Leaves COUNTRY OF ORIGIN Indonesia STATUS 100% Pure and Natural Essential Oil No additives and preservative TYPICAL PROPERTIES Appearance : Clear Liquid Color : Brown to Reddish Brown Odor : Aromatic, Earthy, Spicy and Woody Specific Gravity : 0.950 - 0.975 @ 25oC Refractive Index : 1.505 - 1.515 @ 20oC Solubility : Soluble in 90% Ethanol (1:10 clear) Acid Number : Max. 6 mg KOH/gr Sample GAS CHROMATOGRAPHY ANALYSIS Patchouli Alcohol : Min. 32 % RECOMMENDED STORAGE CONDITIONS Product should be kept in an area that is clean, cool, dry area in a tight closed container and keep away from direct heat or light We really pay attention from the beginning ( the labors works and they package it ) until our goods perfectly ready to delivered. Term of Payment: (T/T) - 50% Down Payment after Signing Contract - 50% after release Bill of Lading (B/L)
Hospital Wall Mounted Elbow Operated Sanitizer Bottle Holder Elbow Operated Disinfectant Dispenser System is a functional and high-quality dispensing solution. In order to meet the users rising standards, we only manufacture the dispenser shell & cover with durable 304 stainless steel. Long lever / short lever / drop / spray / manual / touch-less all available for your choice. Product Details: Model no.: DM 100S Material: Stainless Steel Capacity: 500 ml Function(optional): Drop & Spray Thickness of Backboard 2 mm Features: Simple design, lower cost with high quality Primary application: school, , institutions, hospitals, office, hotel, shopping mail, coffee bar, food factory etc. Additional information: Dispenser Format : Alcohol Spray Dispenser, Disinfectant Dispenser, Gel Dispenser Dispenser Type : Elbow Dispenser Installation Type : Patient Bed Mounted Dispenser, Wall Mount Dispenser Main Material : Stainless Steel
A defoamer or an anti-foaming agent is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. The terms anti-foam agent and defoamer are often used interchangeably. Strictly speaking, defoamers eliminate existing foam and anti-foamers prevent the formation of further foam. Commonly used agents are insoluble oils, polydimethylsiloxanes and other silicones, certain alcohols, stearates and glycols. The additive is used to prevent formation of foam or is added to break foam already formed. In industrial processes, foams pose serious problems. They cause defects on surface coatings and prevent the efficient filling of containers. A variety of chemical formulae are available to prevent formation of foams. APPLICATION Pharmaceuticals Textile Industry Paints & coatings Paints & coatings Detergents Surfactants Paper and pulping industry Oil refining and crude oil Microbiological fermentation TECHNICAL PROPERTIES Anti-foaming agents Contain silicone oil and surfactants Reduce the formation of foam Control the generation of foam on surface of liquid Used in industrial processing liquids Low viscosity & surface active properties Affinity to the air-liquid surface
Product Type: Baby Wet Wipes / Wet Tissues Content: Non-Woven Spunlace, Pure Water, Methylisothiazolinone, Iodopropynyl Butylcarbamate, Methylchloroisothiazolinone Fragrance: Unscented or Scented(Perfume Type: Green tea/Vitamin E /Icy minty/Lavender/Herb/Lemon/Milk/Aloe vera/Chamomile etc,) Fabric Type: Even/Plain/Pearl Weight: 35-70GSM Wipe Size:15x20cm, 18x20cm, 30x20cm customized Folding Method: Z Fold Fragrance: Uncented or Scented by Customer's Option Packing Options: 1-120pcs/bag(with or without plastic lid) Flow-Packs, Flow-Packs w/gusset, Flow-Packs w/ pop-up lids, Tubs Certifications:ISO 9001, SGS, CE MOQ:1000BAGS Lead Time: 25 days after receiving the payment Payment Terms:50% T/T in advance, 50%aginst the B/L, or L/C OEM Service: Yes Features:Alcohol Free, Bleach Free, Fluorescer Free, Benzyl Alcohol, Anti-pull, fluff free Storage Cool and ventilated place without sun exposure Expiration:2 Years Production Capacity 80,000 Bags per day
Product of plant origin, firewood (wood) transformed into coal as solid, black-coloured combustible material, fragile and with a high carbon content of porous composition. Origin: Production in artisan ovens by incomplete combustion of the wood in the absence of air. Hardwoods and semi-hard woods. Uses -fuel for artisan ovens, roasts, barbeques and barbeques. Must be manipulated by adults How to use -ignite charcoal according to availability, a candle cutout with Wick is suggested. -Do not use hydrocarbons or petroleum derivatives. Adult-handled alcohol may be used. -After approximately three minutes of ignition, complete the barbecue with charcoal. -Start to make the barbecue when the charcoal burns homogeneously and there is a layer of ash on it, being able to accelerate the process by a bellows or similar. Performance calorific value ranges from 29,000 to 35,000 kj/kg. The calorific value of 0.07 Kcal/MhºC Storage Store between 5 and 40 º C in ventilated rooms or in open spaces but protected from the weather. Flammable product. Keep away from sources of heat or sparks in their original containers duly sealed. Keep away from children's reach.
Product name: ammonium acetate Molecular formula CH3COONH4 Molecular weight 77.08 CAS no: 631-61-8 Appearance: Colorless or white bulk deliquescent crystal. Slight acetic acid smell. Relative density is1.17. It is easily soluble in water. Water solution is slight acidity. It is easily soluble in alcohol and slightly soluble in acetone. Specifications: Item Standard Appearance Fine white crystals Assay% MIN 98.0 PH of a 5% solution at 25 6.7-7.3 Insoluble matter% MAX 0.005 Chloride(Cl)% MAX 0.0005 Sulfate(SO4)% MAX 0.005 Heavy metals(as Pb)% MAX 0.0005 Iron(Fe)% MAX 0.001 Packing: 25 kgs net kraft paper bag Application: Ammonium Acetate is widely used in the fuel, the textile industry, can be used to improve the standard of fabric, also can be used as medical intermediate, analytical reagent, meat preservative, buffer, etc. Shelf life : two years.
Pomegranate : Pomegranate (punica granatum) is a fruit-bearing deciduous shrub or small tree in the family lythraceae that grows between 5 and 10 m (16 and 33 ft) tall. The fruit is typically in season in the northern hemisphere from september to february and in the southern hemisphere from march to may. As intact arils or juice, pomegranates are used in baking, cooking, juice blends, meal garnishes, smoothies, and alcoholic beverages, such as cocktails and wine. Young pomegranate trees in side, turkey The pomegranate originated in the region extending from modern-day iran through afghanistan and pakistan to northern india, and has been cultivated since ancient times throughout the mediterranean region. It was introduced into spanish america in the late 16th century and into california by spanish settlers in 1769. Today, it is widely cultivated throughout the middle east and caucasus region, north and tropical africa, south asia, central asia, the drier parts of southeast asia, and parts of the mediterranean basin. It is also cultivated in parts of arizona and california. In the 20th and 21st centuries, it has become more common in the shops and markets of europe and the western hemisphere. Product origin : india
Description HICIDE®MC Function:Broad-spectrum bactericide and preservative Characteristic:univalent stabilization system,No product flocculation. Ingredient:CMIT/MIT(1:5) Appearance :Colorless to yellow transparent liquid,slight characteristic odor pH (25°C):3.5±1 Solubility(25°C) Dissolved in water and low molecular alcohol Foaming :No bubble(DIN 53902). Dosage:1-3kg/ton,increase in protein, casein and similar high nutrition system. The most suitable dosage and compatibility depend on the actual conditions of the products by laboratory testing . Usage :Add 1/3 first in the water,or directly at the end of production Technical service EU license EC labeling (CLP00) CLP Regulation 3.5±1 Physical and chemical properties Appearance: Formcolorless to light yellow transparent liquid Odor:Characterisitics Odour Threshold : Not relevant for safety pH-value at 20°C:3.5±1 Melting point/Melting range:0°C Boiling point/Boiling range:100°C flash Point:N/A Flammability (solid, gaseous)Product is not inflammable Danger of explosion: Product is not explosive Vapour pressure @ 20°C :< 0.001 hPa Density at 20°C :1.03±0.03g/ml Solubility in Water: Soluble
Ammonium Tetramolybdate or Ammonium Quadvimolybdate(AQM) Ammonium Tetramolybdate is one of the important intermediate products in molybdenum deep processing. Different ammonium molybdate products can be used as the catalyst in oil industry and artificial wool, microelement fertilizer, fabric fire retardant, flame retardant, ceramic pigment manufacturing, pigment (molybdenum red, help dye) and other raw material of the molybdenum compounds, in the metallurgical industry field, it is used in the manufacturing of molybdenum rod, molybdenum wire, molybdenum plates, molybdenum powder, etc. Molecular Formula: (NH4)2Mo4O13.2H2O CAS: 13106-76-8 EINECS: 236-031-3 Properties: white crystalline powder, no visible impurities, Can pass through 40 meshes, ammonium molybdate, soluble in ammonia alkali, insoluble in alcohol and acetone. Average particle size: 10-30micron Loose density: 0.60-1.40 (g/cm3) Water solubility (25C): slight solubility Package: Packing in plastic bags, ton bags or iron drum. Chemical Composition: Mo>=56% Element,K,Na,Fe,Al,Si,Sn,Pb,P,Mg Concentration (%),0.0100,0.0010,0.0008,0.0006,0.0005,0.0005,0.0005,0.0005,0.0005 Element,Ca,Cd,Sb,Bi,Cu,Ni,Mn,Cr,W,Ti Concentration (%),0.0008,0.0006,0.0006,0.0006,0.0003,0.0003,0.0003,0.0007,0.0070,0.0005
Product Character Chemical Formula: K2Cr2O7, molecular weight 294.18. Orange-red triclinic crystal. Non-hygroscopic, soluble in water, but insoluble in alcohol. Strong oxidation. Flammable in friction or collision with organic compounds. Poisonous. Application Mainly used in the manufacture of chromic oxide, potassium chromate, chromate yellow pigments, welding electrode, match, chromic potassium alum and chemical reagent. Also used in steel passivating and used as oxidizing agent. Notice 1. Avoid moisture, heat and shock during storage and transportation. Keep away from combustibles. 2. Do not store with foodstuff or strong reducers. 3. Avoid contacting with eyes and skin. 4. Personal protective appliance should be equipped with, such as self-suction respirator, acid-proofing rubber gloves, security coat and boot, chemical-resistant protective glasses. 5. In case of leakage, reduce with 10% sulfuric acid and ferrous sulfate, and neutralize with calcium oxide immediately [quality standard]:HG/T1723242005 Items standard K2Cr2O7 99.7%min Chloride(CL) 0.05%max Insoluble 0.02%max Sulfate(SO4) 0.02%max Moisture 0.03% Sodium (Na+) 0.5% Packaging:In moisture-proof paper-plastic composite bags, net weight for each: 25kg.
Identification of 615-96-3 Name: ethyl 2-bromohexanoate (Related Reference) EINECS: 210-455-9 Molecular Formula: C8H15BrO2 CAS Registry Number: 615-96-3 Synonyms: Ethyl 2-bromo hexanoate (Caproate); Ethyl 2-bromocaproate; Ethyl α-Bromocaproate InChI: InChI=1S/C8H15BrO2/c1-3-5-6-7(9)8(10)11-4-2/h7H,3-6H2,1-2H3 Molecular Structure: ethyl 2-bromohexanoate C8H15BrO2 (cas 615-96-3) Molecular Structure This structure is also available as a 2d Mol file Chemical Properties Appearance: colorless liquid Molecular Weight: 223.1075 Density: 1.221 Boiling Point: 213-215â?? Melting Point: 29â?? Flash Point: 204? Refractive index: 1.45 Solubility: slightly soluble in waterï¼?soluble in alcohols and aethers Safety Data of 615-96-3 Risk Codes: R36/37/38 Safety Statements: S26;S36 Hazard Symbols: Xi:Irritant HazardClass:8 MSDS infomation: ethyl 2-bromohexanoate (615-96-3).msds
Application: This oil purification plant is special for purifying all kinds of lubricating oil such as the Engine oil, hydraulic oil, mechanical oil, coolant oil, gear oil, heat treatment oil and so on. According to the lubricating oil's nature, this machine can rapidly remove water, gas, particulate matters and impurities from lubrication oil, so guarantee lubricating system of machine to work properly and prolong lifetime of machine. Features 1. Strong capability of breaking emulsification. 2. The combination of coalescing separation and vacuum dewatering. 3. More Deeply and precisely FH rectangular filtering system. 4. Zhongnengâ??s unique technology with H.P.M high polymeric adsorbing material. Advantages This machine can fast degas, dewater, and remove the impurity and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). Improves oil quality and performance, restores the lubricating oil parameters such as viscosity, flash point,etc.,thus ensure the hydraulic system, dynamic system and lubricating system running normally.
