Lb1800G Insulating Glass Production Line Suppliers and Manufacturers

1. Glass heat insulation coating is a kind of aqueous liquid composed by metal oxidized nano materials and advanced organic technology, the tawny product is non-toxic, non-irritating, acid and alkaline resistant. Within 20 minutes in ambient temperature, the coating will turn into film, touch dry, complete curing in about 5 to 7 days; one layer of 8 to 10 μm tawny film will be formed on the glass surface. 2. Ultra strong heat insulation effect, warm in winter and cool in summer. For example, to set the indoor air condition at 28ºC in summer, the glass heat insulation coating film can block 80% infrared ray, but the temperature close to the glass will reduce by 18ºC,the overall indoor temperature will reduce by 8 to 10ºC, it can save 50% power consumption; in winter, the high molecular substance of glass coating can prevent the loss of infrared ray from the glass of door and windows, so it can keep temperature of 10ºC in winter. 3. Ultra strong insulation to the hazardous light in solar light: Over 90% ultra violet can be blocked by the glass, only 8% penetration in 370nm ultra violet, that create a comfortable and healthy ambient environment and prevent the aging, discoloring and cracking of curtain, carpet and furniture. 4. With the good market environment, policy guidance, product advantages and competitive price, the product must be accepted by the businessmen and society. Product features: Ultra high hardness and scratch resistance, ultra high light transmittance, outstanding water resistance, solvent resistance and good bonding force. Physical property The following are the typical data but it shall not be regarded as the specification: Appearance, dark blue transparent liquid, content of nonvolatile solid (base on weight): 32~34.0%; specific gravity: 1.06g/ml; brookfield viscosity, RVT (No. 2 rotor, 60 RPM), 50~400 centipoise, pH value: 7~8; stable system; surfactant (anion). Package: 1 to 20 kg Storage period: 2 years Construction process: Spray coating

Fully tempered glass is approximately four times stronger than annealed glass of the same thickness and configuration. Residual surface compression must be over 10,000 PSI for 6mm glass, according to ASTM C 1048 When broken, it will break into many relatively small fragments, which are less likely to cause serious injury. The typical process to produce tempered glass involves heating the glass to over 1,000 degrees F, then rapidly cooling to lock the glass surfaces in a state of compression and the core in a state of tension, as shown in the diagram Tempered glass is often referred to as â??safety glass,â?� because it meets the requirements of the various code organizations. This type of glass is intended for general glazing, and safety glazing such as sliding doors, storm doors, building entrances, bath and shower enclosures, interior partitions, and other uses requiring superior strength and safety properties.

Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for manyapplications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 66 68 2. Alumina - (AI2O3) % 17 18 3. Iron - (Fe2O3) % 0.03 0.06 4. Titanium - (TiO2) % 0.03 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 3 8. Potash - (K2O) % 10 12 9. Loss on Ignition - (LOI) % 0.10 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 â?? 72 2. Alumina - (AI2O3) % 17 18 3. Iron - (Fe2O3) % 0.10 0.15 4. Titanium - (TiO2) % 0.03 0.06 5. Calcium - (Cao) % 0.05 0.20 6. Magnesium - (MgO) % 0.10 0.15 7. Soda - (Na2O) % 9 10 8. Potash - (K2O) % 0.50 0.20 9. Loss on Ignition - (LOI) % 0.10 0.20

Technical parameters Max glass size: 2450*3150mm Min glass size: 450*450mm Cleaning the glass thickness: 3~15mm Transmit speed: max 45m/min Clean glass speed : 3-12m/min Electric power: 28kw ac380v 50hz Water consumption: 0.5t/h Air pressure: 1mpa Contour dimension: 25900*1800*3350mm Features Plc control, touch human-machine interface Automatic identification coated glass and low-e glass film layer Glass electrostatic discharge system No oil lubrication bearing cleaning machine Board pressure hydraulic system, safe and reliable Produce three-layer insulating glass Automatic identification of low-e coated glass¡¯s membrane Min.Order quantity:1set/sets Supply ability:20set/sets per month Port:qingdao tianjin ningbo shanghai Payment terms:l/c, d/a, d/p, t/t, western union, moneygram Packaging details:wooden case or as customer require Delivery details:25 days after the payment

One-way mirror is a kind of high reflectance visble light glass,under the weak light environment ,can observed clearly has a strong ligh strong light sournce enbironment . One-way mirror widly be used for interrogation room, high-end bar, toilet , hospital ,outdoor ecological room,and other special places. One-way mirror can be edge grinded bent,tempered,laminated ,insulated.

Technical Parameters for Standard Automatic Insulating Glass Production Line ModelLBP1800D Max. processing glass size (mm)2000*1800(first press) 2500*1800(second press) Min. processing glass size (mm)450*200 Single glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power25.4KW ( include heater 5KW) Total Weight (Kg)6800 Outline dimension (mm)17300*2200*2850

Technical Parameters for Standard Automatic Insulating Glass Production Line ModelLBP1800D Max. processing glass size (mm)2000*1800(first press) 2500*1800(second press) Min. processing glass size (mm)450*200 Single glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power25.4KW ( include heater 5KW) Total Weight (Kg)6800 Outline dimension (mm)17300*2200*2850

Technical Parameters for Outer-panel Assembly Insulating Glass Production Line ModelLBP2500C Max. processing glass size (mm)3600*2500 Min. processing glass size (mm)450*200 Signal glass thickness(mm)3-15 Cleanout speed (m/min)3-19 Work speed (m/min)15-45 Power supply3P, 380V, 50Hz Total power34.6KW(include heater 10KW) Total Weight (Kg)9800 Outline dimension (mm)24000*2500*3680

Glass insulator.

Asbestos is a mineral that is found in natural settings such as caves and outdoor deposits. For many years it was used as an important ingredient in a large number of products, primarily for the construction industry, but it also had other applications. One such use was to create a strong fiber that could endure high temperatures and even survive fire. This made it more valuable than other materials that were used to created fiber, such as cotton or jute. Fiber that was made out of asbestos was built to last and to endure under most any circumstances.Application: Break lining Thermal insulation products. Rubber products. Brake products. Electrical material. Textile industry. Construction industry.

1.Polymer Insulator Character: 1.1High mechanical strength; 1.2Good performance of hydrophobicity and anti-pollution; 1.3 Excellent electrical Performance; 1.4 Small volume and light weight. 2.TID polymer Insulator Character: 2.1 We adopt the advanced injection producing technology for housing and the design of the shed adopt unique aerodynamics principle. 2.2 Good Raw material : We use HTV silicone rubber which hydrophobicity can reach to HC1 level We use hot dip Galvanizing steel fitting ,the thickness of the zinc more than 100 m. We use ECR rod as the core which is high acid resistant. 7200Hr testing passed . 2.3 Special marking design. We use the double seal design between the rubber and the fitting. We can mark your logo on the fitting or rubber. 2.4 Excellent Manufacture Technology: Perfect match between fitting and rod With imported end-fitting crimping equipment ,ensures the mechanical performance of the product Perfect bound between silicone rubber and the rod. 2.5 The unique end fitting sealing structure improves product sealing reliability 2.6 The strict inspection measures ensure the perfect quality of every product. Product Advantages: 1.Light weight It is small in size and in light weight, it is about 1/5 to 1/9 of the porcelain insulator in the same grade voltage, so itâ??s convenient for transportation and installation. 2.Good Anti-pollution Composite insulator has a good anti-pollution performance, so it can operate safely in polluted area, it requires neither annual cleaning or maintaining at zero. 3.High Anti-fouling property Good aging resistance performance, strong ability of anti-pollution flashover and good electric corrosion resistance, can ensure that the internal insulation core will not be affected by moisture. 4..Strong shock resistance Composite insulators have good brittleness resistance, strong shock resistance and there no brittle fracture accident. Composite insulators are interchangeable with ceramic. 5.Stable Performance The composite insulator has high mechanical strength, reliable structure and stable performance, which provides a guarantee for the safe operation of the line.

Voltage class kv: 15, 25 & 35 - easier construction thanks to the light weight - excellent impact resistance - excellent mechanical properties - the characteristics to repel water of polymer material

Design 1)gb/t19519-2004 Iec61952, ansi 2)10kv, 115kv, 161kv, 230kv, 252kv¡­.. 3)self-refined silicone rubber with imported raw material from dor corning co. Usa, fumed silica is imported from cabot co. In the usa and wacker co. In germany. 4)weathershed silicon-rubber sheds are the feature of taiguang technology. 5)made of ecr core 6)advanced compressing technique of metal end fittings Performance: Excellent electrical insulation properties and restoration of insulator performance High mechanical strength Good features of light weight, self cleaning, easy to install, anti-aging. Good resistance to soiling and flashover Hydrophobicity of sheds meets class hc1. We can make long rod suspension composite insulator, line post composite insulator, interphase composite spacer, pin composite insulator, electric railway composite insulator, etc. Wooden case/barrel.

Line post insulator used on distribution line and transmission line upto 132kv. It is mounted rigidly on supporting structure by means of a steed or bolts. It is non-puncturable design. Connected fitting type: tie top conductor binding type and clamp top with vertical or horizontal mounting. Cantilever strength can be 5kn, 10kn, 12.5kn, 16kn. Main type: Ansi c29.7 type: 57-1, 57-2, 57-3, 57-4, 57-5, 57-11, 57-12, 57-13, 57-14, 57-15, 57-21, 57-22, 57-23, 57-24, 57-25, 57-31, 57-32, 57-33, 57-34, 57-35 Other type according to iec383 and bs137. Woods or cartons with pallet