Composite Line Post Insulator

Design
1)gb/t19519-2004
Iec61952, ansi
2)10kv, 115kv, 161kv, 230kv, 252kv¡­..
3)self-refined silicone rubber with imported raw material from dor corning co. Usa, fumed silica is imported from cabot co. In the usa and wacker co. In germany.
4)weathershed silicon-rubber sheds are the feature of taiguang technology.
5)made of ecr core
6)advanced compressing technique of metal end fittings

Performance:
Excellent electrical insulation properties and restoration of insulator performance
High mechanical strength
Good features of light weight, self cleaning, easy to install, anti-aging.
Good resistance to soiling and flashover
Hydrophobicity of sheds meets class hc1.

We can make long rod suspension composite insulator, line post composite insulator, interphase composite spacer, pin composite insulator, electric railway composite insulator, etc.


Wooden case/barrel.

It has good performance of hydrophobicity and anti-pollution. The main model are FZSW-10KV/4KN, FZSW-22KV/6KN, FZSW 132KV/10KN.

Composite Station Post Insulator
Name: Composite Station Post Insulator
No.: F-003
Addtime: 2017-06-22
Views : 25
General Introduction
Sali supply Suspension Clamp, Pole Line Hardware, Eye Bolt, Pigtail Bolt, Insulator, Polymer Insulator, Orcelain insulator, Precing Connector, Preformed Guy Grip, Vibration Damper, Fastener etc. All of them with best quality and low price.

This product is applied to high voltage power line service, and has features of good hydrophobicity,anti-aging, anti-leakage trace and electrical erode proof, tensile strength and bending strength, strong mechanical strength, with good performance in shock resistance good quakeproof & brittle-break proof, light weight, easy to installation, and the installation outline of top and base are the same size with porcelain pin type, they can exchange to use each other.
Sali is a leading manufacturer of Insulator, Polymer Insulator, Orcelain Insulator, Glass Insulator, Guy Grip Deadend, Composite Pin Insulator, Wedge Tension Clamp, Anchor Clamp etc. Welcome to contact us to know more.

Main Technical Parametes (performance meet GB/T20142-2006 IEC61952)
Product Model Rated Voltage (kv) Rated Mechanical Bending Load (kn) Rated Catileve Load (kn) Structure Height H. (mm) Min. Arc Distance (mm) Min. Creepage Distance (mm) Diameter of Shed (mm) Lightning Impulse Withstand Voltage (peak)(kv) P.F.1min Wet Withstand Voltage (virtual value)(kv)
FZSW-10/5 10 5 0.6 215 125 290 100/90 75 42
FZSW-15/5 15 5 0.6 245 170 600 138/118 105 45
FZSW-20/8 20 8 1.2 400 300 920 122/92 125 50
FZS-20/8 20 8 1.2 420 320 700 138 125 50
FZSW-35/6 35 6 2 460 360 900 148/118 185 95
FZSW-66/8 66 8 1.5 770 650 1930 160/130 325 140
FZSW-66/12 66 12 2 760 630 1940 215/185 325 140
FZSW-110/6 110 6 1.5 1150 1050 2950 160/130 325 200
FZSW-110/10 110 10 4 1220 1060 3260 215/185 450 200
FZSW-220/10 220 10 4 2250 2050 6520 215/185 950 395

Note:
1.The mini creepage distance is a little different as per product height.
â?¢ 2. The product height and top, bottom accessories install dimension could be choosed from table, also could be supplied their dates to us by yourself. The 220kV insulator could be one section , and also two sections.
3. 110~220kV composite core post insulator only could be applied to busbar post or lateral post. It should be discussed with manufacturer if the prohucts are used for knife switch post.

Types: Long rod composite insulator, tension & suspension insulator, line post, station post/busbar support insulator

Composite insulator consists of three parts:

Fiberglass core: ECR
End fitting: Hot-dip galvanized forged steel and casting steel.
Silicone rubber: HTV

VOLTAGE RATING & STRENGTH RANGE
11kV up to 500kV. 40kN up to 300kN long rod type, 4kN up to 20kN post type.

STANDARD
TRONCO ELECTRIC insulators complied with the standard of IEC 61109 & IEC 61952

ADVANTAGES
The use of composite insulators in place of traditional porcelain and glass insulators for line insulation has become widespread in the last 20 years. High temperature vulcanized (HTV) silicone rubber is dominating for transmission voltages.
Lighter weight
Lower cost
Easier handling
Better resistance to damage from vandals
Superior contamination performance

APPLICATION
Long rod insulators are used for suspension and tension towers for high voltage grids and railway grids. Composite post insulators are used for disconnector, switchgear and substation works. Tronco Electric can also make the design and supply the insulator strings.

Voltage class kv: 15, 25 & 35

- easier construction thanks to the light weight
- excellent impact resistance
- excellent mechanical properties
- the characteristics to repel water of polymer material

Line post insulator used on distribution line and transmission line upto 132kv. It is mounted rigidly on supporting structure by means of a steed or bolts. It is non-puncturable design.
Connected fitting type: tie top conductor binding type and clamp top with vertical or horizontal mounting.
Cantilever strength can be 5kn, 10kn, 12.5kn, 16kn.
Main type:
Ansi c29.7 type: 57-1, 57-2, 57-3, 57-4, 57-5, 57-11, 57-12, 57-13, 57-14, 57-15, 57-21, 57-22, 57-23, 57-24, 57-25, 57-31, 57-32, 57-33, 57-34, 57-35
Other type according to iec383 and bs137.


Woods or cartons with pallet

We manufacture & supply 11kv & 24kv post insulator, as per industry specifications and standards.

Until 2009, more than 4 million taiguang composite insulators are in service throughout the country and abroad.

Products have been sold to 30 provinces and districts including taiwan and also have been exported to over 20 countries in asia, africa, europe, america and australia.

Now we are looking for agency in africa and europe, we warmly welcome customers from all the world to visit our company and estanlish long term business relations!

Practice proves that taiguang insulators have superior performance and longer life

Wooden case/barrel.

Composite Insulator Manufacturer
Founded in 2010, Taporel Electrical (Jiangsu) Power Fitting Co., Ltd, held by Shaanxi Taporel Electrical Technology Co., Ltd. in Yangtze river delta economic belt, is a professional company specializing in R&D and manufacture of composite insulator fittings, power line fittings, and other fittings for transmission and distribution lines. It directly provides fittings for Taporel Electrical and Wishpower.
Composite Insulator Classification
According to different installation methods, insulators can be divided into suspension insulators and post insulators; according to the different insulating materials used, they can be divided into porcelain insulators, glass insulators and composite insulators (also called composite insulators). according to different voltage levels, they can be divided into Low-voltage insulators and high-voltage insulators. according to the different environmental conditions used, the pollution-resistant insulators used in polluted areas are derived; according to the different types of voltages, DC insulators are derived. there are also various special-purpose insulators, such as insulating crossarms, Semiconductor glaze insulators and tension insulators for power distribution, spool insulators and wiring insulators, etc. In addition, according to the different breakdown possibilities of insulators, it can be divided into A-type, non-breakable insulators and B-type instant-breakable insulators.