Specification h-9150 Max.Drilling capacity °35mm Spindie taper mt4.Nt40 Spindle travel 150mm Spindle speed 3s 100.200.300 Variable speed 500-2000mm Swing 520mm Table diameter 600*800mm Column diameter °115mm Distance from spindle to table 350-700mm Motor hp 3hp Hydraulic power /cm¦ 20/cm¦ Overall height 210mm Weight 700 kg Specification h-7150 Max. Drilling capacity °25mm Spindie taper mt3.Nt30 Spindle travel 150mm Spindle speed 3s 500.1000.1500 Swing 460mm Table diameter 600*800mm Column diameter °102mm Distance from spindle to table 350-700mm Motor hp 2hp Hydraulic power /cm¦ 20 /cm¦ Overall height 2100mm Weight 600 kg Specification h-6150 Max. Drilling capacity °16mm Spindie taper mt2 Spindle travel 150mm Spindle speed 3s 1000.1500.2000 Swing °460mm Table diameter 600*800mm Column diameter °102mm Distance from spindle to table 100-700mm Motor hp 2hp Hydraulic power /cm¦ 20/cm¦ Overall height 1800mm Weight 380 kg Specification h-5100 Max. Drilling capacity °10mm Spindie taper jt6 Spindle travel 100mm Spindle speed 3s 1000.2000.3000 Swing °360mm Table diameter 450*600mm Column diameter °80mm Distance from spindle to table 100-400mm Motor hp 1hp Hydraulic power /cm¦ 20/cm¦ Overall height 1600mm Weight 260 kg
Specification Sud- 650/1000 Drilling capacity S45c 50mm Fc20 55mm Boring capacity S45c 100mm Fc20 120mm Tapping capacity S45c Fc20 Spindle taper Mt#5 Spindle travel 200mm Induction motor Multi-speed motor 9 steps: 64, 90, 130, 215, 300, 445, 600, 850, 1250 Spindle motor Ac servo motor 3.7kw Torque 1.09kg.M Positioning accuracy 0.01 /200 Repeatability í= 0.02mm Least increment 0.01mm Rapid traverse 8000 mm/min Cutting feed rate 40~4000 mm/min Table size 1000 x 1000mm Table working area 1000 x 650mm Spindle nose to table Max.: 700mm min.:300mm Table to ground 720mm Machine high Max.: 2260 min.: 1860 Machine weight 1500 Power Ac 220v 60hz í= 10%
1.Max. Drilling dia.(cast iron) : 45mm 2.Max. Drilling dia.(mild steel) : 32mm 3.Face milling capacity : 80mm 4.End milling capacity : 32mm 5.Work table size : 800mm*240mm 6.Working table cross travel : 190mm or 230mm 7.Working table longitudinal travel : 560mm 8.T-slot size : 12mm 9.Head tilt left right : 90íp 10.Spindle stroke : 120mm 1.Overall dimension ; 1090mm*1120mm*785mm 2.Packing dimension : 850mm*760mm*1150mm 3.Mw/gw weight : 300/350kg
Model hl super tech 2 Features * Magnet base size û 355 x 115 x 80mm * Magnet surface/pole apoxy sealed/two pole * Drilling capacity û 19mm, 25mm, 32mm * 2with broach cutter type drill m/c upto100mm * magnet holding power - 2300 kg. * power source - ac 220v 50hz * height û 550mm * stroke û 300mm
(Model) Specification ZX-13E Drilling capacity 13 mm Chuck size 13 mm Table travel(mm) 290 Table size 185 x 185 mm Spindle travel 60 mm Distance spindle axis to column(mm) 125 Spindle taper B16 Columm diameter 60 mm Spindle speed range(r.p.m) 540-3100 Spindle speed series 5 Motor power(HP) 1/3 Overall height 730 mm N.G./G.W.(kg) 35/37 Packing case dimension(mm) 680*440*255 In carton or wooden case
Model Z3032 x 7 Drilling capacityú¿mm) 32 Max.tapping dia.(mm) M16 Distance spindle axis to column generating line(mm) 300-700 Columm diameterú¿mmú¬ 150 Spindle taper MT3 Spindle travelú¿mm) 150 Spindle speed range(50Hz)(RíñPíñM) 100-1600 Spindle speed serier 8 Rotary angle of rocker in hirizontable plane(íp) 360 Distance between spindle nose to working(mm) spindle of base(mm) 275-680 Dimension of worktableú¿mmú¬ 250í-250í-250 Dimension of baseú¿mmú¬ 1050í-550í-120 Motor(kw) 0.75 or 1.1 N.G./G.W.(kg) 380/475 Packing dimension(cm) 122í-61í-138 In cartons or wooden cases The dimension is 122X61X138mm
(Model) Specifications ZX7550CW Max.drilling dia.ú¿mm) 50 Max.horizontal milling dia.(mm) 100 Max.vertical milling dia.(mm) 25 Max.boring dia.(mm) 120 Max.tapping dia.(mm) M16 Spindle taper MT4 Distance spindle to table surface(mm) 90-490 Spindle speeds range(r.p.m) Vertical Horizontal 115-1750 (8steps) 80-1300 (9steps) Spindle travel(mm) 120 Table sizeú¿mmú¬ 800í-240 Table travel(mm) 400í-230 Motor(KM) Vertical0.85/1.5 Horizontal1.1 N.W./G.W(kg) 850/1000 Packing dimensions(mm) 1280í-1100 í-2240 1280í-1220 í-2240 In wooden case,and the N.W./G.W. is 850/1000
Technical specification:- -drilling in m.S.:25 -end milling in m.S.:20 -tapping in m.S.:20 -boring in m.S.:30 -spindle hole taper:mt-3 -spindle travel:150 -spindle speeds [rpm x steps]:1002650 x 8 -diameter of ram:72 -spindle autofeed ranges:fine feed -dist. spindle center to column:206 -work table:255 x 460 -longitudinal travel:350 -cross travel:206 -diameter of column:90 -drill-head motor:1 hp / 1440 rpm -head motor v-belt:b-46.
Technical specification:- -drilling in m.S.:25 -end milling in m.S.:20 -tapping in m.S.:20 -boring in m.S.:30 -spindle hole taper:mt-3 -spindle travel:150 -spindle speeds [rpm x steps]:1002650 x 8 -diameter of ram:72 -spindle autofeed ranges:fine feed -dist. spindle center to column:206 -work table:255 x 460 -longitudinal travel:350 -cross travel:206 -diameter of column:90 -drill-head motor:1 hp / 1440 rpm -head motor v-belt:b-46.
Pillar drilling machines 800 kgs 1250 x 700 Cap.12 mm to 65mm
Useful to electricians, articians, fabricators, construction industry for drilling in steel, wood, concrete & stone. Qty.1
Redial drill machine Model: 40krdfa (all geared autofeed redial drill machine) Capacity (m.M) Drilling in steel 38 Drilling in c. I. 40 Tapping in steel 32 Spindle Spindle travel 150 Spindle taper mt-4 No. Of spindle speeds 8 Range of spindle speeds 70-1190 No. Of feed 03 Feed value mm / rev. 0.1 0.2 & 0.3 Working range Column diameter 220 Max. / minimum dist. Between spindle centre to column face 890/370 Max. / minimum dist. Between spindle nose to base plate 1150/490 Vertical movement on column of railarm 660 Size of base plate 1365 x 715 Working surface of table 350x310 General Number / centre distance of "t" slots for base plate 2-138 Size of "t" slots for base plate m-16 Number / centre distance of "t" slots for working table 2-80 Size of "t" slots for working table m-16 Nett. Weight of the machine (approx.) 1500 kg. Shipping dimension of the machine 2200x1530x1115 Power Drilling head motor 1. 5 h. P. / 3ph-50hz / 1440 rpm Arm elevating head motor 0. 5 h. P. / 3ph-50hz / 1440 rpm Standard accessories Electrical equipment with wiring, drilling head motor, Arm elevating motor, instruction manual, motor pulley, drill drift. Extra accessories Working box table, machine lamp, coolant pump with accessories, Reversible switch, 'v' belt (b-47 / a-23), quick chain chuck, Drill chuck-arbour etc. Specification may be changed without prior notice in case of design modification
Model: 32krdf Drilling in steel 32 Drilling in c. I. 32 Tapping in steel 25 Spindle travel 150 Spindle taper mt-3 No. Of spindle speeds 10 Range of spindle speeds 55-1571 No. Of feed 03 Feed value mm / rev. 0.1 0.2 & 0.3 Column diameter 160 Max. / minimum dist. Between spindle center to column face 810/320 Max. / minimum dist. Between spindle nose to base plate 1140/295 Vertical movement on column of railarm 845 Size of base plate 1365 x 715 Working surface of table 350x310 Number / centre distance of "t" slots for base plate 2-138 Size of "t" slots for base plate m-16 Number / centre distance of "t" slots for working table 2-80 Size of "t" slots for working table m-16 Nett. Weight of the machine (approx.) 1150 kg. Shipping dimension of the machine 2100x1430x1015 Drilling head motor 1. 5 h. P. / 3ph-50hz / 1440 rpm Arm elevating head motor 0. 5 h. P. / 3ph-50hz / 1440 rpm Standard accessories: electrical equipment with wiring, Drilling head motor, arm elevating motor, instruction manual, motor pulley, drill drift. Extra accessories: working box table, machine lamp, coolant pump, Reversible switch, 'v' belt (b-47 / a-23) drill chuck-arbour etc.
Model no. 38kpf Drilling capacity in steel 38mm No. Of spindle speed 8 Range of spindle speed 100-1860 rpm Morse taper in spindle nose mt-4 Spindle center to column face dist. 260mm Spindle travel 150mm Working surface of table 440mm Dimension of baseplate 700x430mm Working surface of base plate 460x330mm Max. Dist. Spindle nose to base plate 1080mm Max. Dist. Spindle nose to table 635mm Center dist. Between foundation bolts 610x335mm Diameter of column 112.60mm Power required 1.5hp Motor speed 1440 rpm No. Of v.Belt b-56 Nett wight of machine 425kg Wooden case packaging, goony packing, export packing
Drill machine is equipped with 4 drilling heads. Drill holder is capable of drill from 3 mm. To 14 mm. Machine is equipped with duel speed motor to obtain fine results on different kinds of paper and is fitted with automatic table lift system. Drill machine is made of rigid steel to avoid any friction. Specifications: Required space L x w x h 2050 x 2300 x 2500mm Working height 950 mm Drill bit speed 1400 mm Stroke speed 11 or 22 strokes/min. Power supply Voltage 400 v Phase 3 ph Frequency 50 hz Connection in value 1.7 kw
25 To 38 mm Universal Radial Drill Machine Specification Model Drilling Capacity (in Mild Steel) 25 mm Pillar Diameter 125 mm Spindle nose to table distance 410 mm Spindle nose to base distance 660 mm Distance from Spindle centre to Pillar face 670 mm Taper in Spindle MT.3 Number of Speed 8 Speed Range of Speed 90 to 2300 RPM Table Size 250 x 200 x 200 mm Base Size (Machined Area) 500 x 600 mm Overall Base Size 925 x 600 mm Spindle Travel 220 mm Pillar Length 1220 mm Overall height with pulley Guard 1425 mm V. Belt Section B. 43" & A. 23" Weight (Approx) 500 Kgs Motor 1440 RPM 3 Phase 440 Volts 1 HP & 0.5 HP
Feature 1. ííThe spindle speed and feed change are affected by their eparate machine levers, and therefore easily and accurately conrtrolled. 2. ííThe cutting depth is controlled by the drill depth stop. Thus the drill can automatically stop. 3. ííThe spindle head and the arm as well as column are reliable clamped by means of clamping mechanism, which makes easy maintenance possible. 4. ííThe spindle head movement and the arm rotationg are light and quickíú 5. ííThe arm is raised and lowered by a couple of gears. The arm elevating unit is provided with mechinical and eletrical safety. 6.ííThe guideways of the arm, the outer and inner cloumns are wear-resistant for long service life.
Tank drilling machines
This machine is designed for drilling, counterboring, spotfacing, tapping etc, in small or middle sized components. It is intended for single piece, small batch or batch production in machine or repair shops.
Drilling cum milling machine Drilling in m.S.-40, drilling head spindle hole taper -mt-4, spindle travel-250, diameter of ram-78, spindle autofeed ranges-0.05 & 0.09 mm/rev., max. Drilling radius-990, machine measurement-1200 x 780 x 2100
