Pillar Drill Machine

Drilling cap. In Steel 38 Drilling cap. C. I. 45 Tapping in M. S. 15 Spindle center to col. 320 Spindle travel 240 Spindle nose to base 1000 Dia. of column 121 Dia. of RAM 72 Size of Sq. Table 375 x 475 Overall base size 720 x 470 No. of spindle speed (8 speed) 90 to 2630 Taper in spindle base MT-3 Machine area of base 485 x 445 Drill motor (gear drive) 1.5 HP 1440 RPM Total height of machine 1800 V-Belt size B-58 Net Weight 325 Kgs.

Technical specification:- -drilling in m.S.:25 -end milling in m.S.:20 -tapping in m.S.:20 -boring in m.S.:30 -spindle hole taper:mt-3 -spindle travel:150 -spindle speeds [rpm x steps]:1002650 x 8 -diameter of ram:72 -spindle autofeed ranges:fine feed -dist. spindle center to column:206 -work table:255 x 460 -longitudinal travel:350 -cross travel:206 -diameter of column:90 -drill-head motor:1 hp / 1440 rpm -head motor v-belt:b-46.

Pillar drilling machines 800 kgs 1250 x 700 Cap.12 mm to 65mm

Machine Capacity 40/50mm 38 HD 38mm LD 25mm MD 25mm MD 25mm LD 20/200 DRILLING (C.I.) 45 38 38 38 25 25 20 DRILLING (M.S.) 40 38 38 35 25 25 20 TAPPING CAP 25 20 15 20 15 15 10 DRILLING HEAD TAPPER SPINDLE MT-4 MT-4 MT-4 MT-3 MT-3 MT-3 MT-2 Quil Movement 240 240 230 240 175 155 120 SPEEDS No. Range of Spindle 8 8 8 8 8 8 8 Spindle Speed Min. /Max. 45 to 1000 70 to 2000 70 to 2000 70 to 2000 130 to 2600 130 to 2600 80 to 3500 FEEDS No. Range of Feed Manual Manual Manual Manual Manual Manual Manual WORKING RANGE Dist. From Spindle Center to Column Face 350 300 280 250 250 230 200 Max. Dist. From Spindle to Base Plte 1030 1000 940 940 970 1050 900 Max. Dist. From Spindle to Work table 550 530 530 530 530 680 650 WORKING TABLE Table Diameter 485*485 422*422 380*380 370 Round 325*325 310*310 250*250 Baste Plate & Column Column Diameter 135 108 101 92 92 92 74 Base Plate 800*525 680*430 630*405 630*405 580*365 370*550 480*310 No. of â??tâ?? Slots 2 2 2 2 2 2 2 POWER Drilling Motor 2HP 960 RPM 1.5 HP 1400 RPM 1 HP 1400RPM 1 HP 1400RPM 1 HP 1400RPM 1 HP 1440RPM 0.5 HP 1400RPM WEIGHT( Kgs.) Approximate 550 kg 375 kg. 300 kg. 275 kg. 225 KG. 185 KG. 110 KG V-BELT No. B-71 B-59 B-56 B-52 B-52 B-49 A-44

CAPACITY 20 DRILLING (M.S.) 20 DRILLING (C.I.) 20 TAPPING CAP. 10 DRILLING HEAD TAPPING SPINDLE M.T - 2 QUIL MOVEMENT 120 SPEEDS NO.RANGE OF SPINDLE 8 SPINDLE SPEED MIN / MAX 80 TO 3500 FEEDS NO.RANGE OF FEED MANUAL WORKING RANGE DIST.FROM SPINDLE CENTRE TO COLUMN FACE 200 MAX. DIST. FROM SPINDLE TO BASE PLATE 900 MAX. DIST. FROM SPINDLE TO WORK TABLE 650 WORKING TABLE TABLE DIAMETER 250 X 250 BASE PLATE & COLUMN COLUMN DIAMETER 74 BASE PLATE 480 X 310 NO. OF â??Tâ?? SLOTS 2 POWER DRILLING MOTOR 0.5 KG , 1400 RPM WEIGHT (KGS) APPROXIMATE 110 KG. V BELT NO. A - 44

Model KD600 - Function: drilling - Number of pully: 2 units - Drill route: 50 mm - Distance from spindle nose to the table: 120 mm - Distance from center of spindle nose to column: 104.5 mm - Column diameter: �? 46.5 mm - Bit diameter: �?1.5 - �?13 - Motor: 1/4HP â?? 1 phase â?? 4P (220V/50Hz) Model KD800 - Function: Drilling - Number of pully: 2 units - Drill route: 58 mm - Distance from spindle nose to the table: 255 mm - Distance from center of spindle nose to column: 126.5 mm - Column diameter: �? 58.5 mm - Bit diameter: �?3 - �?13 - Motor: 1/2HP â?? 1 phase â?? 4P (220V/50Hz) Model KDC800 - Function: drilling and tapping - Number of pully: 3 units - Drill route: 58 mm - Distance from spindle nose to the table: 245 mm - Distance from center of spindle nose to column: 126.5 mm - Column diameter: �? 58.5 mm - Bit diameter: �?3 - �?13 - Motor: 1/2HP â?? 1 phase â?? 4P (220V/50Hz)

SPECIFICATION : VMT 38 Drilling cap. In Steel 38 MM Drilling cap. C. I. 45 MM Tapping in M. S. 20 MM Spindle center to col. 320 MM Spindle travel 240 MM Spindle nose to base 1000 MM Dia. of column 120 MM Dia. of RAM 72 MM Size of Sq. Table 375 x 475 MM Overall base size 720 x 470 MM No. of spindle speed (8 speed) 90 to 2630 Taper in spindle base MT-3 Machine area of base 485 x 445 MM Drill motor (gear drive) 1.5 HP 1440 RPM Total height of machine 1800 V-Belt size B-58 Net Weight 325 Kgs.

Heavy duty pillar drill machine Model no. 38kpt Drilling capacity in steel 38mm No. Of spindle speed 8 Range of speed 70-1910 rpm Morse taper in spindle nose mt-4 Dist. Between spindle center to column face 270mm Quill movement 250mm Working surface of the table 440mm Dimension of base plate 760x480mm Working surface of base plate 500x350mm Max. Dist. Between spindle nose to baseplate 1000 Max. Dist. Between spindle nose to table 565mm Center dist. Between foundation bolts 620x335mm Diameter of column 112-60 Fine feed attachment Motor kw / speed 1.5hp / 960rpm No. Of v.Belt b-55 Nett weight of machine 350kg Standard accessories: motor pulley, instruction manual, drill drift. Extra accessories: electric motor, drill chuck & arbour, v.Belt, r.F switch. Wooden case packing, goony packing, export packing

25 mm capacity Pillar type Drilling machine with S.G.I Steel Gears. With Electric Motor, Reverse/Forward Switch and V-Belt. Max. capacity in Mild Steel 25 mm Spindle Taper MT-3 SGI Steel Gears (Heavier than ordinary Cast Iron (casting) gears. Dia. of Ram 72 mm Dia. of Column 90 mm Spindle Centre to column 250 mm Table Size: - 345 x 345 mm Max. Distance Spindle nose to Table 710 mm Max. Travel of Spindle 150 mm Motor 1 HP 3-Phase