SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won't cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 5, The output voltage can be set between -40% to +20% of rated voltage. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 300-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 12, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it is suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI Off Grid Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy + 1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customers requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Tara gum, E417, CAS no.39300-88-4, used as a thickening agent and stabilizer for food, produced by separating and grinding the endosperm of Caesalpinia spinosa seeds. Characteristics as Emulsifiers, Stabilisers, Thickeners and Gelling Agents. The viscosity of a 1% solution of Tara gum is around 5,500 cps, similar to guar gum and almost three times higher than locust bean gum. Uses in a wide range of food applications such as baked goods, dairy products, frozen desserts, water jellies, fruit preparations, meat based products, sauces and dressings. As an experienced Tara gum manufacturer and supplier, we has been supplying and exporting Tara gum for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Tara gum Specification ITEM STANDARD Appearance A white to white-yellow odorless powder Galactomannans 80% Viscosity ( Brookfield LVF, 1%, 25, Spindle #4, 20rpm, mPa.s) 5000 Solubility Soluble in water, insoluble in ethanol pH 5.0- 7.5 Moisture 12% Max Protein (factor N x 5.7) 3.5% Max Fat 0.75% Max Ash 1.5% Max Acid insoluble matter 2% Max Lead 5 mg/kg Arsenic 3 mg/kg Mercury 1 mg/kg Cadmium 1 mg/kg Heavy metals (as Pb) 20 mg/kg Starch Negative E. coli/ 5g Negative Salmonella spp./ 10g Negative Clostridium Perfringens/ g Negative Mould & yeast 500 cfu/ g Total plate count 5000 cfu/ g
Citrus & Apple Pectin powder, E440, CAS no.9000-69-5, Pectin is used as a gelling agent in a wide range of fruit-based products, such as jams, marmalades, jellies, fruit preparations for yoghurts and desserts and fruit filling for bakery products. Pectin is used in confectionery jellies to give a good gel structure and a clean bite. The typical dosage of pectin in food applications is between 0.5 â?? 1.0%. As an experienced Citrus & Apple Pectin manufacturer and supplier, we has been supplying and exporting High methoxyl pectin, DE (Degree of methyl Esterification ) higher than 50 and low methoxyl pectin pectin, DE lower than 50 food grade. for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. High methoxyl pectin/Low methoxyl pectin Specification Degree of esterification >50 or 65 % pH of 1% solution 2.8-3.3 Loss on drying, %
Sorbic Acid, E200, CAS no.110-44-1, food preservative, manufacturing process via chemical synthesis, malonic acid and trans-butenal as raw materials, also can be produced from isomeric hexadecenoic acids. Sorbic acid is used in it's salt forms (sodium sorbate, Potassium sorbate, and calcium sorbate) as a preservative in the production of drinks and food to prevent the growth of any mold, yeast, and fungi. It can be used to preserve wines, beverages, soy sauces, picked products, seafood, and meat products. The preservative efficiency of Sorbic Acid is 5-10 times the effectiveness of Sodium benzoate. As an experienced Sorbic Acid manufacturer and supplier, we has been supplying and exporting Sorbic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sorbic Acid powder/granular food grade Specification ITEM STANDARD Appearance White crystalline powder or granular Identification Conforms Heat Stability Not change in color after heating for 90 minutes at 105 Odor Slight characteristic odor Purity 99.0-101.0% Water 0.5% Melting Range () 132-135 Residue on Ignition 0.2% Aldehydes (as Formaldehyde) 0.1% Max Lead (Pb) 5 mg/kg Arsenic (As) 2 mg/kg Mercury (Hg) 1 mg/kg Heavy Metals (as Pb) 10 mg/kg
Product Description Categories Preservatives Qty in 20 FCL 5600kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E235 CAS No. 7681-93-8 HS Code 294190 Specification FCC/USP Natamycin, E235, CAS no.7681-93-8, food preservative. Natamycin 50% in Glucose is a mixture of Glucose and Natamycin. It is used in the storage and preservation of fruits (e.g. orange, pear, apple or strawberry), fruit juice and green tea drinks. Natamycin suspension can be added directly(spraying or immersion)to the food. The recommended dosages of Natamycin 50% in Lactose is in the range 4â??40 mg per kg or litre of food. Exact dosage cannot be stated as it depends on the nature of the product for which it is intended. As an experienced Natamycin 50% in Glucose manufacturer and supplier, we has been supplying and exporting Natamycin 50% in Glucose, Natamycin 95%, Natamycin 50% Lactose, and Natamycin 50% Nacl from China manufacturers for almost 10 years, please be assured to buy from us. Any inquiries please feel free to contact us, we will reply you within 1 working day. Natamycin 50% in Glucose Specification ITEM STANDARD Appearance Off-white crystalline powder, odorless Purity 50% Loss on drying 8% pH (10% solution) 5.0- 7.5 Arsenic 1 mg/kg Lead 1 mg/kg Mercury 1 mg/kg Total heavy metals ( as Pb) 10 mg/kg Total plate count 100 cfu/g Coliform bacteria 30 MPN/ 100g E.coli/ 5g Negative Listeria monocyto/ 10g Negative Salmonella/ 10g Negative
Price of transparent white mineral oil #15 food grade How to use: Because it have special and excellent physical and chemical function, it can be used in many different industries: 1. Cosmetic industry for skin care cream, bath gel, shampoo and other cosmetic formulations with excellent softness and silky feel. 2. Rubber, plastic, latex, polyurethane, light industry: as a model release agent, brightener agent and release agent Dosage: Depending on the application conditions, the concentration is from a few PPM up to 100% range. Note: With a high concentration of acid or alkali substances and Lewis acid has a tendency to degrade volatile exposure, the higher the temperature of the reaction is more obvious. Low concentration in contact with strong acid or alkali at high temperatures or prolonged action of the viscosity tends to become larger until cross -linked. Specification price of transparent white mineral oil #15 food grade Article 201-10 201-20 201-50 201-100 201-200 201-350 Viscosity(25)mpa.s 10±2 20±4 50±5 100±5 200±10 350±10 Flash point() 160 210 270 310 310 310 Density(25)g/cm3 0.930-0.940 0.945-0.955 0.955-0.965 0.960-0.970 0.962-0.972 0.965-0.975 Volatile(150,3h)% 3 2 1.5 1 1
Sodium Alginate, E401, CAS no.9005-38-3, food thickener, manufacturing process from brown seaweeds. Sodium alginates are soluble in both hot and cold water and are available in a variety of viscosity ranges with various gelling properties. Sodium Alginate solutions are converted, in the presence of calcium ions (calcium chloride or other soluble calcium salt), to Calcium Alginate, the heat-stable gelled form. As an experienced Sodium Alginate manufacturer and supplier, we has been supplying and exporting Sodium Alginate: Super low viscosity (10-100cps), Low viscosity (100-200cps), Middle viscosity (200-500 cps), High viscosity (500-1000 cps), Super high viscosity (above 1000 cps) for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Alginate Specifications Industry Grade Food Grade Agriculture Standard Export Standard Food additive standard Mesh size As required As required Viscosity mPa.s 80-800 As required 150 Moisture % 15.0 15.0 15.0 PH 6.0-7.5 6.5-7.5 6.0-8.0 Ca content% 0.3 0.3; 0.2 Ash 24 30-37 sulfate ash Viscosity decline % 20 No below the requirement in the contract after one year White degree % 30 Insoluble matter in water % 0.6 0.3 transparency cm 4 Heavy metal % 0.004 Arsenate % 0.0002 Lead (Pb) % 0.0004
Categories Aromas Qty in 20' FCL 14400kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC CAS No. 8006-90-4 HS Code 290611 Specification FCC/USP Ethyl Acetate, E1504, CAS No.141-78-6, with chemical formula C4H8O2. manufacturing process through ethanol and acetic acid, safe food additives, used as aromas & perfumes. Function: Ethyl acetate is the ester of ethanol and acetic acid, it is manufactured on a large scale for use as a solvent. This colorless liquid has a characteristic sweet smell (similar to pear drops) and is used as a solvent in oil-based lacquers and enamels, in inks and adhesives and as a process solvent. As an experienced Ethyl Acetate manufacturer and supplier, we has been supplying and exporting Ethyl Acetate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Ethyl Acetate Food grade Specification ITEM STANDARD Appearance Colourless transparent liquid Assay (%) 99.5 Loss on drying (%) 0.1 Acidity (as Acetic, %) 0.004 Density (g/cm3) 0.897 0.902 Evaporation Residue (%) 0.001 Color (Apha) 10 Distillation range () 76.0 79.0 Ethanol (%) 0.04 Arsenic 3 mg/ kg Lead 2 mg/ kg Mercury 1 mg/ kg Heavy Metals (as Pb) 10 mg/ kg
1. Brief Introduction The chemical fertilizer Urea, npk contains midium Potassium and low Phosphorus in proportions. The nutrients are long and slow released and supplied. The pure natural Sulphate Potassium we added into the fertilizer is from Lop Nor Lake, which is a token of high quality. 2. Features 1) Upgraded nutrition: abundant inorganic nutrients, combined with premium organic nutrients, make extraordinary fertilization. 2) Disease resistance: the chelated trace elements are able to reduce nutrient deficiency diseases. 3)Root developing and soil enriching: the imported humic acid and amino acid will help rooting and soil enriching. 3. Application Range It is used for all fruit trees and vegetables. 4. Appliction Method and Amount It is used as base fertilizer and additional fertilizer, 40-80 kg per acre. Improper handling will cause injury for crops because of biuret. Keep separate with seeds. 5. Packing and Storage 1. Description of Urea Fertilizer 46 Nitrogen UREA is a spherical white solid. It is an organic amide molecule containing 46% nitrogen in the form of amine groups. UREA is infinitely soluble in water and is suitable for use as an agricultural and forestry fertilizer as well as for industrial applications which require a high quality nitrogen source. It is not a poison to mammals and birds and is a benign and safe chemical to handle. 2. Advantages of fertilizer urea Urea can be applied to soil as a solid or solution or to certain crops as a follar spray. Urea usage involves little or no fire or explosion hazard. urea's high analysis , 46 % N, helps reduce handling , storage and transportation costs over other dry N forms. Urea manufacture releases few pollutants to the environment. Please store at cool and dry place. No swallowing.
Sugar Esters E473, CAS No.37318-31-3 , commonly known as Sucrose esters of fatty acids, manufacturing process by esterifying sucrose with fatty acids. By varying the degree of esterification of the sucrose molecule it is possible to obtain emulsifiers with HLB values ranging from 1 up to 16. It is a light yellow powder, a non-ionic surfactant and is used as an emulsifier in dairy products, baked goods, soft drinks, jelly, cake and candy. Sucrose Fatty Acid Esters are a mixture of mono-, di-, and tri-esters of sucrose with fatty acids derived from edible vegetable or hydrogenated vegetable oils and fats. As an experienced Sugar Esters manufacturer and supplier, we has been supplying and exporting Sugar Esters for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sugar Esters powder Specification ITEM STANDARD RESULTS APPERANCE White crystal powder Conforms ACID VALUE (AS KOHMG/G) Not more than 6 3.0 ARSENIC (AS)MG/KG Not more than Less than 1.0 LEAD (PB) MG/KG Not more than Less than 2.0 CADMIUM MG/KG Not more than Less than1 MERCURY MG/KG Not more than Less than1 OTHER SOLVENT Isopropy 350ppm(incombination) Pass Ethyl acetate 126.7-128C Propylene glycol Pass Isobutyl alcohol 10ppm Pass Methy alcohol 10ppm Pass Methyl Ethyl Ketone 10ppm Pass DIMETHYL SULFOXIDE sulfoxide Not more than 2ppm Pass FREE SUGER(AS SUGER) % Not more that 5% 1.35 DIMETHYLFORMAMIDE Not more than 1ppm Pass WATERCONTENT% Not more than 4% 0.51 LOSS ON IGNITION % Not more that 4% 0.47 HLB VALUE 13
Sodium saccharin spray dried powder 100 mesh or Anhydrous, E954, CAS NO. 128-44-9, Other name: Sodium Saccharin Anhydrous, Molecular Formula: C7H4O3NNAS. Sodium Saccharin spray dried powder 100 mesh is used in a wide range of low-calorie and sugar-free food and beverage applications. As an experienced Sodium saccharin spray dried powder manufacturer and supplier, we has been supplying and exporting Sodium Saccharin Dehydrate (with 15% water, CAS number 6155-57-3) and Sodium Saccharin Anhydrous(with 6% water, CAS number 128-44-9) for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Categories Sweeteners Qty in 20' FCL 20000kg Min Order 1000kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E951 CAS No. 128-44-9 HS Code 292511 Specification FCC/USP/EP Meltion Point of Insolated Saccharin 226-230 Appearance White crystals Content % 99.0-101.0 Loss on Drying % 15 Ammonium Salts ppm 25 Arsenic ppm 3 Benzoate and Salicylate No precipitate or violet color appears Heavy Metals ppm 10 Free Acid or Alkali Complies with BP/USP/DAB Readily Carbonizable Substances Not more intensely colored Than reference P-toluene Sulfonamide 10ppm O-toluene Sulfonamide 10ppm Selenium ppm 30 Related Substance Complies with DAB Clarity and Color Solution Color less clear Organic Volatiles Complies with BP PH Value Complies with BP/USP Benzoic Acid-Sulfonamide 25ppm Mesh size 100mesh The Quality also meets with the standard of FCC/BP/EP and FAO/WHO/JECFA96/E954
EES All in one system 16KWH LiFePO4 Lithium Battery with AC Charger and 10KW Inverter for solar energy storage application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;
Our All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 12-15KW 120/240V Inverter for mobile vehicle application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;