1.1 Description BP-150WS rechargeable lithium ion batteries Broadcast Camera Battery V Mount 14.8V 150Wh for Dragon Red Digital Cameras 1.2 Cell Model 18650 lithium ion cell 1.3 Typical Capacity 10.4Ah 1.4 Typical Voltage 14.8V 1.5 End of Charge Voltage 16.8V 1.6 Charge Current 0.5C 1.7 Charging time 2-3 Hours 1.8 End discharge Voltage 10.0V 1.9 Max continuous charge current 4A USB 2.1A, D-tap 4A 2.0 Maximum Continuous Discharging Current 10.4A 2.1 Over-discharge Voltage Protection cell 3.0V 2.2 Over-Current Discharge Protection 10-20A 2.3 Short circuit protection With protection 2.4 Dimension 152.0�±0.5mm�?96.0mm�±0.5mm�?52.5�±0.5mm 2.5 Weight 881g �±10g 2.6 Operation Temperature Range Charge 0~45 C, Discharge -20~60 C
Product Name: Acerola Powder Product Code: WH2001 Description: Product obtained from selected fruit (Malpighia emarginata )which juice is dehydrated by atomization (spray dryer). Common Uses and Orientative Dosage: Powder/solid mix for drinks 230.00 g/100kg SENSORY SPECIFICATION Aspect Fine powder Color Ivory Odor Characteristic Taste Characteristic PHYSICAL & CHEMICAL SPECIFICATION Loss on drying at 105 °C Max. 5.00 g/100g Ascorbic Acid Min. 17% Specific Gravity at 25°C 0.40 g/mL - 0.80 g/mL Total Ash Max. 5.00 g/100g Moisture Max. 6.00 g/100g pH 2,80 - 4,20 CONTAMINANTS SPECIFICATION Heavy Metals Max. 10 ppm MICROBIOLOGICAL SPECIFICATION Aerobic Plate Count Max. 1000 CFU/g Escherichia Coli Negative Yeasts and Molds Max. 100 CFU/g Salmonella Negative Total Coliform Max. 10 MPN/g Packaging: Cardboard box with plastic bag. Shelf Life: 24 months from the date of manufacture if following storage conditions. Storage conditions: Store in sealed original packaging, in a dry and ventilated place, protected from sunlight. Hygroscopic product.
SENSORY ANALYSIS SPECIFICATION METHOD Color Clear Yellow To Yellow Amber Internal Method Aspect Liquid Internal Method PHYSICAL & CHEMICAL ANALYSIS SPECIFICATION METHOD Spilanthol Content (GLC) Min. 30% Internal Method Refractive index at 20 �°C 1,454 - 1,494 Internal Method Specific Gravity at 25�°C 0,920 - 1,000 Internal Method HEAVY METALS SPECIFICATION METHOD Arsenic Max. 3 ppm Internal Method Mercury Max. 1 ppm Internal Method Cadmium Max. 1 ppm Internal Method Lead Max. 10 ppm Internal Method MICROBIOLOGICAL ANALYSIS SPECIFICATION METHOD Escherichia coli Negative/g Internal Method Salmonella spp. Negative/25g Internal Method Total Plate Count Max. 1.000.000 UFC/g Internal Method Staphylococcus aureus Negative/g Internal Method Shelf Life: 18 months if stored according to instructions. Storage conditions: Store in a tightly closed container with minimum headspace in a cool, dark and dry place.
Bonny Light Crude oil (BLCO) Quantity Bonny light crude oil (BLCO) 2 000,000 barrels (Two million barrels) +/-10% X at Sellers Option; X 12MONTH ,Shipped in one vessel per LOT . Minimum quantity of 1 million barrels. SPECIFICGRAVITY: 0.8459 API AT 60 DEG.F: Min 33.0 - Max 37.00 +/- 5%(ASTM D-1298) WATER CONTENT BY DISTILLATION: 0.2%(ASTM D-4006) POUR POINT DEGREES: BELOW 40 (ASTM D-97 SULFUR WEIGHT%: 0.14 (ASTM D-139) SALT CONTENT PARTS PER BILLION: (ASTM D-526) REID VAPOR PRESSURE (P.S.I.G.): 6.52 (ASTM D-529) KINEMATIC VISCOSITY @ 30 DEG.: 2.2(ASTM D-523) DISTILLATION INITIAL BOILINGpoint (IBP): 35 DEG.C (ASTM D-86) DISTILL TO 175 DEG.C VOL.%: 35.5 DISTILL TO 250 DEG. C VOL.%: 51.5 DISTILL TO 300 DEG. C VOL%:60.5 COLOUR: Dark Brown
Everflon is a registered trademark of the C&F Group for its fluoropolymer resins.Everflon PTFE fluoropolymer resins are part of the C&F family of fluorine-based products that also includes Everflon FEPEverflon ETFE and verflontm PFA fluoropolymer resins and Everflontm PVDF fluoropolymers.These materials can be used to make a variety of articles having a combination of mechanical, electrical, chemical, temperature, and friction-resisting properties unmatched by articles made of any other material. Commercial use of these and other valuable properties combined in one material has established Everflontn resins as outstanding engineering materials for use in many industrial and military applications Everflon resins may also be compounded with fillers or reinforcing agents to modify their performance in use. The design and engineering data presented in this handbook are intended to assist the design engineer in determining where and how Everflontn resins may best beused. lt is recommended that the design engineer work closely with an experienced fabrica tor because the method of fabrication may markedly affect not only production costs, but also the properties of the finished article.
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at -240 °C (-400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings
Everflon Fluoropolymer PFA Resin Everflon PFA is a perfluoroalkoxy copolymer resin available in pellet or powder. Everflon PFA combines the processing ease of conventional thermoplastic resins with the excellent properties of Everflon polytetrafluoroethylene (PTFE). Products manufactured from Everflon PFA can offer continuous service temperatures up to 260°C (500°F). What's more, Everflon PFA provides superior creep resistance at high temperatures, excellent low-temperature toughness, and exceptional flame resistance. Application Wire insulation, fittings, tubing, filtration housings, wafer carriers, pump housings, valve bodies, heat exchangers and other end use components requiring a high performance fluoroplastic material. Processing Everflon PFA can be processed by conventional melt extrusion, and by injection, compression, transfer, and blow molding processes. High melt strength and heat stability permit the use of relatively large die openings and high temperature draw-down techniques that increase production rates. Reciprocating screw injection molding machines are preferred. Corrosion-resistant metals should be used in contact with molten fluoroplastic resin. Extruder barrel should be long, relative to diameter, to provide residence time for heating the resin to approximately 390 °C (730 °F). For more detailed processing information, including recommend
Our Jamun Honey is derived from the plant of Jamun and it is of darkish darkish black color having very pleasant taste. Here are some specifications Our Honey is 100% pure, unprocessed and without any additives. Our team assure buyer's for the proper laboratory testing with the Government authorized laboratory. Here are the specifications of our Honey Moisture Contents : Around 17-17.50% Total Energy : 330 - 345KCal (per 100gms of Honey) Natural Sugar : 84-86gms C-3 Sugar : Absent/Nil C-4 Sugar : Absent Glucose and Fructose Contents : 45-48gms and 30-33gms respectively (per 100gms of Honey) (AS per USFDA sum of both should be not less than 60gm per 100gm of honey) Sucrose : 3-4gms per 100 gms (Not more than 5gms per 100gms of Honey) Free from Antibiotics We are having a US FDA registered facility for Honey and focusing mainly on the standards set by US FDA and USDA for honey. We are selling our honey in US Retail Stores/Market.
US FDA, KOSHER and HACCP Certified Natural Honey Our Honey is sourced directly from the pristine Himalayan regions of Northern India, ensuring its natural purity. Our commitment to quality is reflected in the following attributes: 100% pure and unprocessed Free from any additives Laboratory testing conducted by Government authorized facilities to ensure quality and authenticity Specifications of our Honey: Moisture Content: Approximately 17-17.50% Total Energy: 330 - 345KCal (per 100gms) Natural Sugar: 84-86gms C-3 Sugar: Absent/Nil C-4 Sugar: Absent Glucose and Fructose Contents: 45-48gms and 30-33gms respectively (per 100gms) [As per USFDA, the sum of both should not be less than 60gm per 100gm of honey] Sucrose: 3-4gms per 100gms (Not more than 5gms per 100gms of Honey) Free from Antibiotics We operate from a US FDA registered facility, adhering to the stringent standards set by both the US FDA and USDA for honey production . Our focus lies in meeting these high-quality standards, and our honey is available in various US Retail Stores and Markets.
Fr/frls House Wires Application :- This is a premium product of electrical wires from KANVI CABLE'. These cables are ideal for wiring in residential and commercial complexes, high-rise buildings, hotels, hospitals, schools, colleges, etc. (where the density of people is high). During a fire, these cables not only emit less smoke and toxic hydrochloric acid gas but also retard the spread of fire enabling those trapped inside to escape safely. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables have low conductor resistance resulting in power saving. These wires are insulated with a special grade PVC compound formulated and manufactured in-house only. The insulation is far superior in terms of critical oxygen and temperature index as well as in light transmission and acid gas generation. The skin coloration offers high insulation resistance and long life. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�??�?�°C to +70�??�?�°C Sizes : 0.75, 1.00, 1.50, 2.50, 4.00 and 6.00 Sq. mm Color Codes : Red, Yellow, Blue, Black and Green (For Earthing) Specification : ISO 9001:2015 Packing : In 90 meter coils in attractive cartons
Silicon carbide paddle Silicon carbide paddle performance Silicon carbide paddle, also known as silicon carbide paddle, silicon carbide cantilever beam, is a silicon carbide ceramic product sintered at a high temperature of 1850�°C. It is used below 1350�°C. Silicon carbide paddle, silicon carbide paddle, silicon carbide cantilever beam The strength can still reach 380MPa; its hardness is second only to diamond, and it will not wear for a long time. Application of silicon carbide paddle Silicon carbide paddles and silicon carbide roller are indispensable carriers in the production and synthesis of semiconductor and solar wafers. It is used in the (diffusion) coating process of polycrystalline silicon wafers or monocrystalline silicon wafers in diffusion furnaces, and it is used to carry and transport silicon wafers in a high temperature environment (1000---1300â??). It is a semiconductor wafer loading system key components. Specifications of silicon carbide paddle 1. The company's current product types of silicon carbide paddleare divided into left and right paddles, single-layer paddles, double-layer paddles, etc. Regular sizes are 2378mm, 2550mm, 2660mm, 2045mm, 2270mm, 2378mm, 2394mm, 2450mm, 2550mm, 2640mm, 3748mm, 3600mm, 3700mm, 3900mm. 2. Other sizes of high-purity silicon carbide paddle can also be developed and manufactured according to customer requirements.
Engine Number/Position of Cylinders: Single Cylinder Engine Capacity: 155cc Bore x Stroke: 58.0 mm x 58.7 mm Compression Ratio: 11.6 : 1 Maximum Power: 11.3 kW / 8000 rpm Maximum Torque: 13.9Nm / 6500rpm Starter System: Electric Starter Lubrication System: Wet Engine Oil Capacity: Total â?? 1.00 L ; Regular 0.90 L Fuel System: FI (Fuel Injection) Clutch Type: Dry, Centrifugal Automatic Transmission Type: V-belt Automatic Engine Type: Liquid cooled 4-stroke, SOHC FRAME Front Brake: Disc Rear Tire: 140/70-14M/C 62P Rear Brake: Drum Frame Type: Underbone Front Suspension: Telescopic Rear Suspension: Unit Swing Front Tire: 110/80-14M/C 53P DIMENSION Length x Width x Height: 1980mm x 700mm x 1150mm Wheelbase: 1350mm Ground Clearance: 143mm Seat Height: 790mm Curb Weight: 125 kg (ABS Version), 122 kg (Standard Version) Fuel Tank Capacity: 5.5 liters ELECTRICITY Ignition System: TCI Battery: YTZ7V (ABS Version), NTZ6V (Standard Version) Spark Plug Type: NGK/CPR8EA-9
Coconut Charcoal Briquettes We provide high quality 100% coconut charcoal briquettes for use in shisha/hookah or for barbecue. Our coconut shell briquettes come in a variety of sizes and shapes. It contain low ash and high carbon content. They are long burning (up to 2,5 hours), produce very little smoke, have white colored ash and generate zero odors. Product Specifications : Hs Code. : 4402 Moisture : 8% Max Weight : 14gr Ash Content : 10% Max Ash Colour : White Ash Shape : Cube Packaging : Cartoon Box (inner plastic) Temperature : 650 C Burning Time. : More than 5-7 hours/kg Fixed Carbon : 70% Min Material : 100% Coconut Charcoal Price : $ 1.150 / MT CHARCOAL SIZE : * A : 2.5 x 2.5 x 2.5 cm (can be customized) * B : 3.5 x 2.5 x 2.5 cm (can be customized) * C : 3 x 3 x 3 cm (can be customized) * D : 2.2 x 2.2 x 2.2 cm (can be customized)
FUNCTION & BENEFITS 100% Non-powdered Nitrile, non-allergenic Outstanding durability, high elasticity, and resistance to puncture and tear Anti-static Chemical resistance (oil, acid, alkali, acetoneâ?¦) to protect hands from toxic substances Soft, comfortable to wear The nitrile gloves wrists have anti-slip edges and medium thicknesses SPECIFICATIONS Color: White Thickness: 4.0M and 5.5M Size: S, M, L Quality standards: Manufacturing according to quality management system ISO 14001:2015 and ISO 9001:2015 Achieve the physical and chemical requirements according to standards such as IEST-RP-CC005.4, EN ISO 14644, EN 420: 2003, EN 374-2: 2014 Storage: store in a cool, dry place, avoid from direct sources of heat or sunlight Recommended storage temperature at 25�°C- 45�°C Expiry date: 3 years from the date of manufacture Packing:100 Pieces/Poly Bag, 10 Poly Bag/Carton, 1000 Pieces/Carton APPLICATION Electronics, semiconductor, pharmaceutical, biotechnology, laboratory
FD Pineapple Powder Overview Pineapple Fruit Powder is made from pineapple fruit by spray drying technology. Keep the original flavor of pineapple itself, powder, good fluidity, good taste, easy to dissolve, easy to save. Pineapple is a kind of nourishing fruit, containing sugars, protein, fats, vitamin A, B1, B2, and C, proteolytic enzyme, calcium, phosphorus, iron, organic acid, nicotinic acid, and so on. Among them, the content of vitamin C is the highest one. Pineapple contains one kind of special substance, called â??pineapple enzyme proteinâ?? which could decompose protein, dissolve fibrous protein and blood clot blocking in human tissue, improve partial blood circulation, and eliminate inflammation and edema. FD Pineapple Powder Applicationï¼? Health nutrition, BABY FOOD, solid beverage, dairy products, convenience food, puffed food, condiments, food for the middle-aged and elderly, baked food, snack food, cold food and cold drink, etc.
Applicable fluid medium: water, air, oil, corrosive chemical liquid For example: piping systems for pure water and raw drinking water, drainage and sewage piping systems, salt water and sea water piping systems, Acid-base and chemical solution systems and other industries. Body material: UPVC Transmission mode: electric; 90 angular stroke rotary electric drive Actuator material: cast aluminum alloy/plastic shell Protection device: overheating protection Action time: 4-30 seconds Nominal pressure: 1.0Mpa Nominal diameter: DN15-200 Protection level: IP65 Fluid temperature: -15�°C - 60�°C (no freezing) Ambient temperature: -25�ºC-55�ºC Power consumption: 8VA-30VA Installation method: installation at any angle (horizontal installation is best for prolonging life) Power supply voltage: standard AC220V, optional DC24V, AC110V Voltage tolerance: ±10%, DC tolerance ±1% Connection method: internal thread, bonding (welding), flange, double union
Characteristics Standard NFC 17-102/2011 Efficiency T 60 µs Lightning current withstand test (10/350 s) Iimp 100kA Max. current withstanding test Imax 200kA Effective Working Temperature Range tmin / tmax -25 C / 90 C Electrical Enclosure IP IP65 Central Rod Section sqm 315mm2 Standard deviation �?PDA < 0.57 �?PTS Product Specifications Warranty Lifetime On-site testing capabilities Proprietary tester Maintenance & Service Flex detachable modules Width �?120mm Height 445mm Net Weigth 1,8kg Material Stainless Steel / Aluminum Feasibility for protection levels I - II - III - IV ION Generator Unit Double Sustainability 100% Recyclable Pole Fixing Diameter (M) �?60mm Packing Informations Width �?135mm Length 480mm Gross Weigth 2,05kg Protection Radius (Rp) Height 2m 3m 4m 5m 10m Level -I- 30 45 61 77 81 Level -II- 32 49 65 84 87 Level -III- 37 56 76 95 98 Level -IV- 41 63 82 105 106
Place of Origin:Guangdong, China (Mainland) Brand Name: Frida Model Number:B-001 Type:Baby Shoes Outsole Material: Foam/Rubber/Gum-rubber Insole Material:/Leather/Suede Vamp fabrics:Leather/Cotton fabric or Gretel fabric(optional) Color:Multi other colors for optional SIZE:0~24 Months(Optional) MOQ:100 pairs mix color mix size Samples:Available( Charge for fee) Samples Tim:7-15 days Packaging Details: 1pair/polybag,then bulk into master carton or follow up customer's requirement to packing. Port:SHEN ZHEN Lead Time 1 - 100 >100 Quantity(Pairs) 1 - 100 >100 Est. Time(day) 30 To be negotiated Payment: T/T, L/C,Western Union,Cash,ESCROW,Paypal Trade Term: FOB/CIF/C&F/DDP/DDU/EXPRESS DELIVERY. Shipment: Ocean shipping,Air Way,International express. OEM Service: Customized logo, pattern, styles and packing are all available
When your testing requires a walk in rooms choose â??TEMPOâ?? controlled temperatures solution. Our test rooms feature automated process control, energy efficiency and a vast range of other features and options. Every â??TEMPOâ?? environmental room features equipment that reliably produces required conditions, structural integrity that keeps the room working properly through years of demanding test cycles, and measuring/monitoring equipment that precisely records all test data. Temperature range â?? 20 C to 60 C Temperature accuracy â?? �±0.2 C Temperature uniformity â?? �±1 C Humidity Range â?? 40% Rh to 95% Rh Humidity Accuracy â?? �±2%Rh Humidity Uniformity â?? �±3%Rh Air Circulation : The motorized blower at the backside of the chamber provides the recirculation of air which ensure the maximum uniformity of temperature and humidity inside the chamber should be maintained. Heating System : The high quality SS tubular heater made from the nichrome wire sheathed in SS tube is used. The special arrangement of heaters avoids the direct rendition of stored samples. Humidity System : High-quality U shape S.S. tubular heater is used for better heating. Humidity System : Steam injection system with water level arrangement is provided. A low pressure boiler tank and reservoir tank with duly argon welded is fitted with a float valve. When the water level in the tank is low the switch cut off. The ISI marked heating elements are used with the inbuilt stand by humidity system with auto change over the facility. Refrigeration System : The CFC Free hermetically sealed Emerson Copeland make compressor is used for better cooling with eco friendly refrigerant. The cooling system is made up of split type and the compressor is coupled with the condenser unit in a well ventilated area to avoid the hot air throw inside the chamber. Control System : The microprocessor based PLC (logging capacity of 1000 readings) with HMI touch screen 4.3â?³ colour display, which gives the direct display, the process value and the set value of temperature and humidity inside the chamber. The sensor (transmitter type 4-20 ma) which will accurately measure the temperature and humidity is provided with a high speed ethernet communication. The internal working area is illuminated.
$2900/MT CIF China Brand: BRF/JBS MOQ 05 FCL Only will work on Enquiries by LOI. Grade A Chicken Paws Origin: BRAZIL-SIF plants 103 PACKING: Packing carton contains poly bags in a freezer carton= Approx. 10-20kg/per carton Total 27 MT of frozen chicken per 40ft container stored at -18�°C INSPECTION: S.G.S Inspection ### Key Export Products - Frozen Poultry Products - Frozen Pork Products - Processed Meat Products - Frozen Meat ### Key Trade Services - Supply Chain Management - Logistics and Transportation - Quality Assurance - Market Intelligence - Risk Management - Sustainability Consulting - Technical Support