Everflon is a registered trademark of the C&F Group for its fluoropolymer resins.Everflon PTFE fluoropolymer resins are part of the C&F family of fluorine-based products that also includes Everflon FEPEverflon ETFE and verflontm PFA fluoropolymer resins and Everflontm PVDF fluoropolymers.These materials can be used to make a variety of articles having a combination of mechanical, electrical, chemical, temperature, and friction-resisting properties unmatched by articles made of any other material. Commercial use of these and other valuable properties combined in one material has established Everflontn resins as outstanding engineering materials for use in many industrial and military applications Everflon resins may also be compounded with fillers or reinforcing agents to modify their performance in use.
The design and engineering data presented in this handbook are intended to assist the design engineer in determining where and how Everflontn resins may best beused. lt is recommended that the design engineer work closely with an experienced fabrica tor because the method of fabrication may markedly affect not only production costs, but also the properties of the finished article.
In most situations, PTFE is an ideal choice for a wide range of applications. There are occasions, however, when additional fillers such as graphite, carbon, glass, bronze, and other materials are added to enhance PTFE products for use in a specific application. Generally speaking, these Filled PTFEs maintain their original chemical and thermal resistance characteristics, while also exhibiting improved strength, stability, and/or durability.
Everflon® PTFE (polytetrafluoroethylene) is available as a white powder, often called fine powder. Everflon® PTFE fine powders are generally converted into usable articles (shapes, wire insulation and tapes, etc) via paste extrusion, followed by post extrusion heating to remove residual hydrocarbon solvents and to increase material density. Products manufactured with genuine Everflon® PTFE fine powder are rated for continuous service temperatures up to 260°C (500°F).
Everflon®PTFE (polytetrafluoroethylene) granular fluoroplastics are ideal for compression molding a wide variety of components and shapes; such as rods, tubes and sheets. Products fabricated from genuine Everflon® PTFE are unaffected by most chemicals and feature superior electrical, low friction and mechanical properties. Products manufactured with genuine Everflon® PTFE are rated for continuous service at 260°C (500°F).
Part of the Everflon family of fluoropolymers, Everflon PTFE micropowder is a white, free-flowing polytetrafluoroethylene (PTFE) resin used as an additive in other materials and systems.
PTFE is also used to make gaskets because of its strength and heat resistance. It is also used as a thread seal tape for plumbing. PTFE also has good electric insulation properties and thus it is used to insulate cables and connector assemblies For price , specification and other details please approach us with end Buyers LOI and company profile
Polytetrafluoroethylene (PTFE) is the best chemical resistance properties, long-term use of temperature can reach 260 degrees, very good self-lubricating and electrical flame retardant. Commonly used in the food machinery, textile machinery, engineering machinery, and so on.
Aokeray ptfe tubing MEDICAL grade PTFE Tube manufacturer .Ptfe tube dispersion resins via paste extrusion temperature sintering ptfe tubing , excellent resistance to high temperature, abrasion resistance, corrosion resistance, electrical properties, with no adhesion. ptfe tubing is widely used in electric coated, anti-corrosion, insulating sheath sheath, and conveying gases, liquids catheter and automobile throttle lasso casing, spraying coating equipment, etc PFTE RAW MATERIAL is FROM most commonly known as DakiN a brand name .Our PTFE TUBING pass FDA products resinare made from biocompatible resins which are ISO10993-18 Class approved PTFE Tube suitable for national defense, chemical, pharmaceutical, oil, electronics, communications, textile, automotive, aerospace household electrical appliances, etc. Aokeray ptfe tubing MEDICAL grade PTFE Tube manufacturer for inimally Invasive device material ,Micro-bore PTFE tube ,SAME quality of zeus ptfe tubing ptfe extruded tubing ptfe tubing thin wall thickness 0.3mm*0.6mm medical grade ptfe tube , thickness lesst o 0.03mm custom ID0.3mm to ID20mm , can help such as mandrels, liners, jacketing, and fusing sleeves ETCS .Aokeray ptfe tubing .
Pfa products available: 1). Pfa sheet (100-400mm width; 100-400mm length, special size can be customized) 2). Pfa film (0.03-0.3 thickness, special size can be customized) 3). Full size of pfa rod and tube 4). Pfa welding rod ( dia. 3mm, dia. 4mm, dia. 5mm) Pfa (commonly known as the soluble ptfe), it basically retained the properties of ptfe. Such as: outstanding high & low temperature resistance, chemical stability, electrical insulation, self-lubricating, non-sticky and high mechanical strength properties, the outstanding characteristic is with good folding and cracking resistance, and the mechanical strength is 1.6 times of ptfe or more.
Features:1) PTFE tubing is manufactured with ram extruding method using PTFE granular resin 2) PTFE is the most chemical-resistant material of all known plastic 3) With the best electrical properties among plastic materials 4) Applications: insulating cover for conductor, pipe for corrosive fluids Properties:1) Apparent dendsity: 2.10~2.30g/cm3 2) Tensile strength (min.): 18MPa 3) Ultimate elongation (min.): 230% Extruded Tube Min OD=0.5mm, Max OD=250mm, Length according to customer's request Molded Tube Min OD=30mm, Max OD=1000mm, Length: Min=100mm, Max=300mm
