Xgz Cast Stone Scraper Chain Conveyor Suppliers and Manufacturers

Application: Chain conveyors are mainly used in the papermaking industry to transport a variety of loose or bundled materials, which can be transported horizontally or with a slope of less than 30°. Mostly used for feeding waste paper, pulp board to pulper.

Application: Chain conveyors are mainly used in the papermaking industry to transport a variety of loose or bundled materials, which can be transported horizontally or with a slope of less than 30°. Mostly used for feeding waste paper, pulp board to pulper. Chain feed width :1200-2600mm Capacity feedï¼?60-600m3/h Motor power:3-55kw

1.SGB Scraper Chain Conveyor Chain Conveyor, Conveyor, Scraper Conveyor, Scraper Chain Conveyor Introduction of SGB Scraper Chain Conveyor SGB Scraper Chain Conveyor Machine apples to slow gently inclined thin coal seam working face conveyor of coal. Mining height is broken floor to 0.6 m, dip angle of coal seam is not more than 25 degrees. SGB Scraper Chain Conveyor Machine is more suitable for hard coal, large blocks or more inner dirt band conveyor coal. The scraper conveyor is designed to mainly for horizontal transportation in the underground coal mining industry and metallurgical mine. Main Characteristics of SGB Scraper Chain Conveyor 1. Solid structure: SGB Scraper Chain Conveyor Machine can withstand coal and waste rock or other materials of blunt, hit, and other external force. 2. It can adapt to the coalface floor rugged, bending goes needs, can withstand the vertical or horizontal bending. 3. Body short, easy to install. 4. It can double as the shearer running the orbit . 5. SGB Scraper Chain Conveyor Machine can reverse operation, easy to deal with bottom chain accident. Technical Parameters of SGB Scraper Chain Conveyor No.TechSGB420/30(40)SGB520/40SGB620/40(55) 1Delivery volume(t/h)80(100)120150 2Factory length(m)10010080(100) 3Head height(mm)512(620)620620 4Chain speed(m/s)0.79(0.86)0.860.86 5Electric motorsModel numberJDSB30(DSB40)DSB40DSB40(55) Power(kW)30(40)4040 (55) Number of revolutions(r/min)147014701470 Voltage(V)380/660380/660380/660 6Scraper chainFormSide double-strandedSide double-strandedSide double-stranded Specifications(mm)1450(1864)18641864 Breaking load(KN)190320320 7Reducer transmission ratio1:22.24(1:24.56)1:24.561:24.56 8Middle slot size (L x W x H)1200420150 (1500420180)15005201801500620180 9Total weight(t)10.3(13)1415

A conveyor chain is chain that has been designed specifically for chain conveyor systems. It consists of a series of journal bearings that are held together by constraining link plates.

Conveyor Chain

Conveyor Chain

Spiral Conveyor is based on a new and innovative technology, which provides many features and benefits. A spiral conveyor needs less floor space than conventional conveyors and is also faster and more reliable than any elevator or lift. All spiral conveyors are made to order and accommodating most requirements relating to the location of the in and out feed tangents. All configurations can be operated up or down in a clockwise or counterclockwise rotation and can optionally be reversible. The position and length of the in feed tangent on up spirals and out feed tangent on down spirals can be customized to meet specific layout requirements. Spiral chain plate conveying is divided into downward conveying and upward conveying, which can be selected according to different transport materials and technological requirements, which is the best equipment for vertical transportation on the upper and lower floors.

32' Belt conveyor Single belt conveyor 24 tube frame 3.5 HP motor V-belt drive system 14 Height

Large conveyance: Conveyance of bulk materials in a closed case; cement, chemical, and food industries Flow Conveyor Chain moves bulk materials in a closed case. It conveys the particles horizontally, on a slight incline, or vertically in an arrangement shaped like the letter L. This conveyor is sometimes called a Redler Conveyor. Generally, a flow conveyor is used widely in the conveyance of bulk materials such as cement and fertilizer in chemical industries, and grain in food industries. Because it is enclosed, dust from the conveyed materials is contained, and will not pollute the surrounding area. A flow conveyor is not usually used to move sticky, dusty, or low-density products. A flow conveyor set up to move cement has an average capacity of 300 ton/h and a speed of 35 m/min. Usually one strand of chain is used. Specially shaped attachments with large clearances are installed on small pitch or large pitch conveyor chains. The chain operates in a casing filled with conveyed material, such as grain, flour, or ash. This is based on a phenomenon used in a basic science experiment; when you put sand in a long cylinder, closed at one end with paper, and push the sand with all your strength, the paper cannot be broken if the cylinder is long enough. This is because the friction between the sand and the cylinder absorbs all of the pushing force. Conversely, in the flow conveyor, the attachments work as moving walls, and the sand moves along with it. To lift conveyed objects, the friction at the bottom wall of the conveyor must support the weight of the vertical portion, therefore, the conveyor must have a bottom line "L" shape. Because there is very little relative movement among the conveyed materials in this application, breakage is rare. The case width is determined by the attachment dimensions; usually it is less than 750 mm. Chains for flow conveyors include: RF03075 (average tensile strength, 29 kN) through RF26200 (314 kN) for grain conveyance; RF450W (108 kN) through RF36300N (868 kN) for other applications.

Transportation speed (m/min) 10121415162025 Suitable transportation capacity (m3/h) 6-9 9-13 12-1815-23 11-14 16-22 22-2927-36 19-2723-3225-3628-4131-4338-5447-68 36-50 49-68 65-9063-113 50-72 63-90 86-11795-135 72-99 95-131 136-180144-203 As clients' requirements

Crate washer/conveyor chain Material used : polyacetal dupont make with ss (aisi 304 ) pins 500 mtrs.

Scraper bolts can be divided into scraper E-bolts and U-bolts, and single bolts, and 134Se bolts is one of the many e-bolts scraper. Today I will take 134Se bolt as an example and talk about the processing technology of E bolt. The processing method of type 134Se bolts is almost the same as that of the scraper. The general process is blanking â?? forging â?? machining â?? heat treatment â?? shot blasting â?? surface treatment â?? finished product inspection â?? packaging and delivery. 134Se type bolts are actually the choice of material when discharging. 40Cr material is used for 134Se type bolts of Henan Shuangzhi Machinery. Its mechanical properties and other aspects are relatively good, which is suitable for the production environment of coal mine. The raw material is melted at high temperature and injected into the 134Se bolt mould. Through continuous forging and pressing of the raw material, the blank of 134Se bolt is formed. The forging and pressing times shall not be less than 5 times. For the 134Se type bolt blanks, the excess flanges of The E type bolts were removed and threaded tapping was carried out. The oxide scale formed on the surface due to high temperature was further treated by shot blasting. Next is the treatment of the surface appearance, burr the 134Se type bolts and other treatment, as well as the appearance of painting, so that the E type bolts on the completion of the molding, and then the finished product inspection, to ensure that the qualified products can leave the factory, to carry out baling packaging shipment. Henan Shuanzhi produces all kinds of bolts. Welcome to contact us if you need.

Scraper E bolt is a kind of fastener used in coal mine scraper and transfer machine, in addition, there are scraper U bolt, single bolt. Squeezer E bolt manufacturer Henan Shuangzhi machinery since the establishment of the factory has been engaged in the production and processing of squeezer accessories, and squeezer, bolts are often sold products, is also a large demand of coal mining accessories. As a scraper E-bolt manufacturer, Henan Shuangzhi Machinery produces various types of scraper E-bolt. Compared with Zhangjiakou bolts and Running ox bolts, it also has some parts of Shanxi coal machine bolts and Shandong mining machine bolts. According to the size of the main engine more than 630 E bolt have to do, so say the type specification or more complete. Daily demand for coal mine is more the e type bolt, scraping machine e bolt manufacturers double of henan mechanical simple display for everyone: 3 ty - 06 bolt, 3 ty - 02, 90 s and 113 s bolt, 17 g bolt, sa 54, 134 s bolt, etc., for the market often need to bolt, scraper part we will inventory spot, in order to reduce the delivery cycle, shall implement the principle of the first to set the start, we welcome the advisory order!

Scraper conveyor drive shaft belongs to the core accessories of sprocket shaft set, which mainly affects the key to the stable operation of the sprocket shaft drive system. Henan Shuanzhi main production chain wheel shaft group has many years of experience, but also a set of mature fixed processing process. The processing process is as follows: blanking â?? forging blank model â?? heat treatment â?? finishing (lathe and milling) â?? milling spline teeth at both ends â?? quenching â?? shaping â?? assembly with other parts of sprocket â?? test bench operation â?? inspection â?? painting â?? packaging. Precision machining process using CNC machine tools, especially cutting tools, to improve the efficiency and quality of processing. The main power of sprocket wheel comes from sprocket shaft. Henan Shuanzhi flagship product chain wheel shaft group, for each piece of accessories are carefully processed to meet customer needs, if you need to order, welcome to inquire.

The material, processing method and working condition of the middle slot of the scraper can cause the wear of the middle slot. Next, henan Shuanzhi analyzed the influence of working conditions on the middle groove wear of the scraper. Scraper central trough in addition to transport coal, but also bear shearer carrying load, push, pull hydraulic support when the lateral force and longitudinal force. When large coal and gangue block are stuck in the middle trough, the impact force and extrusion pressure will cause the wear of the middle trough. Henan Shuangzhi improves the strength of the middle slot of the scraper, increases the reliability of the accessories of the scraper, and reduces the maintenance of the scraper by adopting the casting of high-quality alloy as a whole or the welding of steel groove, steel band and high-strength wear-resisting medium plate. If you need the middle slot of the scraper, you are welcome to contact us to verify more product information.