Wpc, polyether amine, wire mesh, net fence, metal parts, dimethyl disulfide, methanesulfonic acid, methanesulfonamide, axle scale, weighbridge, 4 aminopyridine..
DESCRIPTION CC-700 is a 100% solid content, two components, high performance polyurea elastomer based on aromatic MDI and amine-terminate Polyether. It displays extremely fast cure times about 10-100 seconds and shrinkage resistance which also provides excellent acid, alkali and chemical resistance. WORKING PROCEDURE 1. Surface preparation - please make sure the surface in clean, dry, sound and smooth condition. 2. Crack repair â?? Epoxy resin mortar, Epoxy resin repair material, single component polyurethane sealant and single component polyurethane waterproofing material. 3. Primer 4. Application â?? 2.1-2.5kg per 2mm thickness. (1.3kg of CC-700 could be applied 1mm thick) 5. Top coat CHARATERISTIC 1. Well abrasion resistance, flexibility and elasticity. 2. Corrosion resistance 3. No building restriction, wide working temperature range. None sensitive to temperature and humidity, it can be harden at 5â??. It can be applied in -40â?? ~ 120â??. 4. Environmental protection and high solid content. 5. Non-sagging and seamless, can be used over flat or vertical surface at the same time. 6. Excellent adhesion to a wide range of substrates.
Our silyl modified polymer (SMP) with Case Number: 216597-12-5, has the same function with Kaneka MS polymer and STP-E (Silyl-terminated polyether) of Wacker. It is also known as SMP, MSP, STP, MS Polymer, Silane modified polymers, Modified silane polymers, Silane terminated polymers, Silyl modified polyether, Modified silyl polyether, Silyl terminated polyether. High performance resin, silyl modified polymers (SMP) are multifunction-terminated groups with special functional groups involved. They have excellent comprehensive properties combining the advantages of silicone and polyurethane polymers. Silyl modified polymers (SMP) are characterized by their environment-friendliness, moisture curing, weather resistance, storage stability , easy processing, as well as isocyanate and solvent free traits. As the raw materials in bonding, silyl modified polymer (SMP) Hiposil x-series are predominantly used in elastic hybrid sealants and adhesives with no health risks from solvents, isocyanates or tin, and therefore meet the requirements of green development. These hybrid adhesives and sealants made of silyl modified polymer (SMP) are usually applied in the scope of building & construction, transportation, general industry and DI Y.
Our silyl modified polymer (SMP) with Case Number: 216597-12-5, has the same function with Kaneka MS polymer and STP-E (Silyl-terminated polyether) of Wacker. It is also known as SMP, MSP, STP, MS Polymer, Silane modified polymers, Modified silane polymers, Silane terminated polymers, Silyl modified polyether, Modified silyl polyether, Silyl terminated polyether. High performance resin, silyl modified polymers (SMP) are multifunction-terminated groups with special functional groups involved. They have excellent comprehensive properties combining the advantages of silicone and polyurethane polymers. Silyl modified polymers (SMP) are characterized by their environment-friendliness, moisture curing, weather resistance, storage stability , easy processing, as well as isocyanate and solvent free traits. As the raw materials in bonding, silyl modified polymer (SMP) Hiposil x-series are predominantly used in elastic hybrid sealants and adhesives with no health risks from solvents, isocyanates or tin, and therefore meet the requirements of green development. These hybrid adhesives and sealants made of silyl modified polymer (SMP) are usually applied in the scope of building & construction, transportation, general industry and DI Y.
Our silyl modified polymer (SMP) with Case Number: 216597-12-5, has the same function with Kaneka MS polymer and STP-E (Silyl-terminated polyether) of Wacker. It is also known as SMP, MSP, STP, MS Polymer, Silane modified polymers, Modified silane polymers, Silane terminated polymers, Silyl modified polyether, Modified silyl polyether, Silyl terminated polyether. High performance resin, silyl modified polymers (SMP) are multifunction-terminated groups with special functional groups involved. They have excellent comprehensive properties combining the advantages of silicone and polyurethane polymers. Silyl modified polymers (SMP) are characterized by their environment-friendliness, moisture curing, weather resistance, storage stability , easy processing, as well as isocyanate and solvent free traits. As the raw materials in bonding, silyl modified polymer (SMP) Hiposil x-series are predominantly used in elastic hybrid sealants and adhesives with no health risks from solvents, isocyanates or tin, and therefore meet the requirements of green development. These hybrid adhesives and sealants made of silyl modified polymer (SMP) are usually applied in the scope of building & construction, transportation, general industry and DIY.
General Description PMDETA is a kind of high activity amine catalyst.. Applications PMDETA is extensively used for catalyst of rigid polyurethane foams. Also it can also be used for polyether PU soft bubble and molding foam. Storage and package Information Hehui Chemical recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences, which could change the products performance in the end use. And it can be stored 12 months at least. 170 per drum.
Type: LCD Projector 1500 lumens, 1000:1 800*480 (720P, 1080p) Lamp: RGB LED 30,000 hours Projection Size:40"-150" Projector Size: 1-4m Aspect Ratio: 16:9/4:3 Input Terminals: USB/HDMI/AV/VGA/SD Built-in Speakers size: 20.8*16.9*8cm N.W.:0.95kg Package including: projector*1, charger*1, AV cable*1, remote control*1, user manual*1 color: black Feacture: support wireless connect with both ios and android phone, also support wired USB connect with iphone.
Colour Index No 45430 E Number E 127 FD C No Red 3 Food Colour Name Red 14 CAS No 16423680 Class Xanthine Total Dye Content min 87 Loss on Drying at 135 C Sodium Chloride Sulphates max 13 Water Insoluble Matter max 02 Ether Extracts max 02 Subsidiary Dye max 40 Dyes Intermediates max 04 Unsulphonated Primary Aromatic Amines max 001 Lead Pb ppm max 1000 Arsenic As ppm max 100 Mercury Hg ppm max 100 Chromium Cr ppm max 50 Heavy Metal ppm max 4000 Solubility at Room Temperature Water gmltr 7000 Glycerine gmltr 2000 Propylene Glycon gmltr 5000 Ethanol 95 gmltr 1500 Stability to Acids Very Weak Neutral Excellent Alkaline Good Baking 205 C 400 F Good Light Better Heat Better
Appearance: Colorless transparent liquid Molecular Weight 425.71 Specific Gravity (Ï?20°C, g/cm3): 0.973 Refractive Index (nD25) 1.429 Boiling Point (°C) 160 Flash Point (°C) 162 Applicationsï¼? ï?? Silane HENGDA-E8166 is versatile amino functional coupling agents used a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The secondary amine function reacts with a wide array of thermoset, thermoplastic and elastomeric materials. ï?? Silane-endcapped Polyurethanes: Silane-terminated polyurethanes can be prepared by reacting traditional NCO-terminated urethane prepolymers with HENGDA-E8166. It can react very fast with free isocyanate groups and lead to a high converted silane-endcapped product. Side reactions can be significantly reduced. It is the most recommended silane for endcapping Polyurethanes. It leads to colorless low-viscosity PU prepolymers with improved UV stability and reduced yellowing tendency of sealants. Another benefit of HENGDA-E8166 is that it does not contain traces of toxic aniline. Examples of applications where HENGDA-E8166 used include polyurethanes for structural adhesives, parquet adhesives and over-paintable hybrid sealant. ï?? Glass fiber/glass fabric composites: As a finish or size constituent. ï?? Mineral fiber insulating materials and abrasives: As an additive to phenolic resin binders. ï?? Foundry resins: As an additive to phenolic, furan and melamine resins. ï?? Sealants and adhesives: As a primer or additive and for chemical modification. ï?? Mineral-filled polymers (composites) or HFFR cables: For pretreatment of fillers and pigments. ï?? Paints and coatings: As an additive and primer for improving adhesion to the substrate. Packing/Storage 25 kg, 200kg plastic or iron drum
SCR Type SiC Heating Elements Product Description SCR(SGR, SEU) type double-spiral silicon carbide heating elements are cut so as to place both electrical terminations on the same end of the element.They are supplied with the terminal assembly attached. SGR (SCR) type Torch Furnace silicon carbide design or dimensions preclude wiring from both sides of the furnace. This type is ideal for blind holes and the operating temperature can be up to 1500 deg C. it is also widely used in various high temperature electric furnaces and other electric heating debices, such as in the industrial of magnet, ceramics, powder metallurgy, glass, metallurgy and michinery etc. Features: 1, High temperature resistance, resistance to oxidation and corrosion 2, Fast heating, long life, small deformation at high temperature, easy to install and maintain 3, With automatic electronic control systems, precision constant temperature can be obtained, curve temperature control can be obtained too according to the needs of production
CAN-Bus data recorder is specially used for offline record CAN-Bus data and suitable for historical data playback, error message analysis. It has integrated one/two/six CAN-bus interface . Users can use TF card record bus data real-time.GCAN-406 is designed for automotive road test. High speed 32-bit industrial-grade processor; GCAN-401 support 6-channel CAN interface( 3-channel of which can select Fault-tolerant CAN); GCAN-401 also can be equipped with GPS and 4G communicate function; Use an external power supply (DC +9~30V, typical: 24V 50mA); EMC: contact ±2KV�air ±15KV; EFT: ±1KV; SURGE: ±1KV; CAN-Bus connection via OPEH3 or OPEN4 terminal; Compliant with CAN specifications 2.0A(11-Bit ID) and 2.0B (29-Bit ID); CAN-Bus baud rate 10Kbps~1Mbps, set by code switch; Galvanic isolation on the CAN connection up to 1500 V; The highest receiving data traffic: 8000 fps/s; CAN data time stamp resolution 100μs; Extended operating temperature range from -40 to 85 °C; Size: (L) 102 mm * (W) 63mm * (H)23mm.
Choice of several systems available Choice of ratchet systems Endless or two part versions Choice of 25mm - 75mm wide polyester webbing Anti-abrasion protection available Anti cutting protection available Conforms to B.S. 5759: 1987 Ratchet Reference, Minimum Breaking Strength, Rated Assembly Strength, Web Width (mm), Two Part (kg), Endless (kg), Two Part (kg), Endless (kg), KRL-25, 1200, 2400, 600, 1200, 25, KRL-35, 3000, 6000, 1500, 3000, 35, KRL-50, 5000, 10000, 2500, 5000, 50, KRL-75, 8000, 16000, 4000, 8000, 75, Cambuckle Reference, Minimum Breaking Strength, Rated Assembly Strength, Web Width (mm), Two Part (kg), Endless (kg), Two Part (kg), Endless (kg), KCB-25, 250, 500, 125, 250, 25, KCB-35, 1000, 2000, 500, 1000, 35, KCB-50, 1500, 3000, 750, 1500, 35 Features Zebra manufactures two basic types of lashing systems, which are each available in either two part or endless configurations, with a wide variety of different end terminals. Cambuckle Compact and light in weight, Cambuckle lashings are ideal for securing light loads, the tension being applied by pulling the lashing hand tight. The Lashing release mechanism operates by depressing the thumb bar. No pre-tensioning of the webbing is possible. Cambuckle lashings are available in a range of Minimum Break Strengths from 250 to 1000 kg. Ratchet Systems For medium to heavy duty applications, Zebra offers a very wide variety of Ratchet Lashings Systems in Minimum Break Strengths ranging from 500 to 8000 kg. 25mm, 35mm, 50mm and 75mm webbing widths are available depending upon the loading requirements of the selected Lashing system.Within the range are many different types of Ratchet systems, all carefully designed and engineered to exert the right amount of pre-tensioning to the lashing. How to order Lashings Having first selected the appropriate Minimum Breaking Strength, the lashing format must next be considered. Here, there are two options: Two-Part or Endless, with the possibility to specify the fixed and overall lengths of a Two Part Lashing or the overall length of an Endless Lashing. FL= Fixed Length OL= Overall Length Two Part
Dead end grip for OPGW Component Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, Extensioe Rods, bolt, nut, etc. Characteristic 1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well. 2. Under the co ndition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force. 3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable. Conditions For The Usage 1. Terminal poles/towers; 2. Corner poles/towers; 3. Dead-end poles/towers; Intensity According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied. Select Chart Model Grip(KN) Length of Inner Armor Rods(mm) Length of Outer Armor Rods(mm) Estimated Weight(KG) Color ONZ-60-* * 60 1900 1500 2.9 Yellow ONZ-70-* * 70 2000 1600 3.5 Yellow ONZ-80-* # 80 2200 1700 4.2 Yellow ONZ-90-* # 90 2400 1800 4.3 Yellow ONZ-100-* # 100 2500 1900 4.5 Yellow ONZ-120-* # 120 2600 2000 5.0 Yellow Note: representing the outer diameter of the optical cable (mm).
Dead end grip for OPGW Component Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, Extensioe Rods, bolt, nut, etc. Characteristic 1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well. 2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force. 3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable. Conditions For The Usage 1. Terminal poles/towers; 2. Corner poles/towers; 3. Dead-end poles/towers; Intensity According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied. Select Chart Model Grip(KN) Length of Inner Armor Rods(mm) Length of Outer Armor Rods(mm) Estimated Weight(KG) Color ONZ-60-* * 60 1900 1500 2.9 Yellow ONZ-70-* * 70 2000 1600 3.5 Yellow ONZ-80-* # 80 2200 1700 4.2 Yellow ONZ-90-* # 90 2400 1800 4.3 Yellow ONZ-100-* # 100 2500 1900 4.5 Yellow ONZ-120-* # 120 2600 2000 5.0 Yellow Note: representing the outer diameter of the optical cable (mm).
Our main brand:AB ABB GE Emerson Siemens Bentley Westinghouse Hima module. To get our best price & fast quotation, please send us E-mail now. What's New in Connected Components Workbench Software Version 11 Simple and cost-effective software package for small to large standalone machine builders. The latest release offers additional device support and enhancements. The Latest Release of Motion Analyzer Software is Now Available Comprehensive motion-application sizing tool used for analysis, optimization, selection, and validation of Kinetix® motion control system. The latest release of motion analyzer has a completely redesigned user experience and workflow. New Essential Components Catalog Now Available Download the latest Essential Components catalog that features some of our latest products including circuit breakers, solid state contactors, terminal block printers, light curtains, solid state cable pull, and pressure and temperature sensors. Quality Seamlessly Integrated Award-Winning Products User Friendly Time-Tested Performance Innovation Enabling Technologies Product Migrations Insight-Driven Future Ready Our products are widely used in: - CNC machinery metallurgy - oil and gas - petrochemical - chemical -paper printing - textile printing and dyeing - machinery - electronics manufacturing - automobile manufacturing Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. 7)Type of payment: T/T 100% Payment in Advance 8)Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time If there is anything else you want to know, Allen Bradley GuardMaster 440R-ZBR520AZ1 Safety Relay Signed Lee Reynolds Abstact Textured Oil Painting in an Aluminum Frame Enlarge Allen Bradley SLC 500 I/O Scanner # 1747-SN Lot of 2 ALLEN BRADLEY 1392 POWER SUPPLY 02-30481-0001 3A 250V REV E Norton 16 x .125 x 1 Cutoff Wheels A 46-Q4R55 Lot of 10 DAYKIN 1-Phase 1500 VA (Approx. 1.5 KVA ) Transformer Model# CVFSD-0507 Air Gauge Co. Electron LED ---Parts Only!
21.4 mhz crystal filter 6pads/4pads passbands 7.5 kHz: 21.4 MHz crystal filter datasheet Package Style 7x5 4 Pad x 2 Number of Poles 6 Pads Passband ±kHz @ 3dB) ± 7.5 kHz Stopband ( ±kHz @ dB) ±25.0 @ 35 Ripple (dB) 1.0 Insertion Loss (dB) 2.5 Guaranteed Attenuation -910 +/-10 @ 80 Terminating Impedance (Ohms//pF) 1500//0.5 Coupling Capacitance (pF) 5 pF Operating Temp. Range -20 C to + 70 C Storage Temp Range -30 + 80 C
