Supply stern tube, stern shaft, stern frame, rudder stock, rudder blade, rudder carrier, rudder horn, propeller, propeller shaft and bow thruster Can supply whole set stern frame and rudder system for all kinds and all sizes of vessels including: - stern shaft, propeller shaft, stern shaft nut, stern tube, stern roller, water lubricatio stern shaft sealing apparatus, oil lubrication stern shaft sealing, stern shaft bearing, shafting intermediate bearing, counter shaft, hydraulic pressure joint coupling - rudder construction, rudder stock, rudder blade, rudder pintle, rudder pintle cover, lower/upper rudder carrier, lower rudder bearing bush, rudder trunk, rubber seal, hydraulic nut - propeller shaft, bow thruster, propeller Any class certificate such as, ccs, nk kr, abs, dnv, lrs, kr, ec etc can be provided. We had produced the rudder system and shaft system for m/v 400000dwt ore carrier(for cvrd company), 176000dwt, 156000dwt, 115000dwt and 85000dwt cargo vessel and oil tanker, 70m, 69.9m and 45m multi-purpose ocean engineering vessel Please feel free to contact with us freely for your inquiry
1.The mixing chamber is of chilled structure with quick and better heating/cooling effects. The inner wall is coated with hard chrome for long service life.. 2.Build-up welding of hard alloy for the two, three, four ridge top and two sides of the rotor, all the working surface are coated with hard chrome, good appearance and abrasive resistantce, the cooling/heating medium can pass through the hollow of the tangent linear type, mesh type, and synchronization type rotor. 3.Constant hydraulic pressure seal structure is used for the top of the rotor and the seal effect is good with long service time thanks to high pressure lubrication automatic alarm for used up of oil. 4.The upper bolt relieves the pressure automatically to protect the machine and for long service time if the machine work for too long time under overload condition. 5.The working surface of up and down bolts are coated with hard chrome, good appearance and abrasive resistance. The cooling/heating medium can pass through the inner hollow of down bolt. 6.A rotary oil cylinder is used for the discharge door, smooth running and accurate positioning. 7.Use two shafts put-out hard teeth reducer and gear coupling or "+" type universal joint, the transmission is smooth with high effciency, low noise level and long service life.
Hc hydraulic cone crusher is widely used for secondary and fine crushing in the fields of mining, building materials, metallurgy and so on. It can crush materials with middle and high hardness, such as ironstone, copper ore, granite, an, locking oilcan and hydraulic driving oilcan) not only protect the machinery, but also deal with troubles without disassembling the parts; 2. Easy operation, reliable performance and adjustable finished product size; 3. The crushing chamber is specially designed according to particles-layer-pressure principle. The special chamber and the suitable rotary speed improve crushing ratio and capacity as well as the cubic product percentage; 4. If something abnormal happens, such as iron is fed into the crushing chamber or there is a jam in the chamber, the machine will lift up the cover and discharge the materials automatically. This eliminates the trouble of stopping the machine to discharge the materials by workers, so the maintenance is easier, the cost is lower than spring cone crusher; 5. It is adjusted by hydraulic device and lubricated by diluted oil. The labyrinth seal eliminates the defect of mixture between water and oil in the traditional spring cone crusher; 6. The mantle and cone cave are made by high manganese steel. The special design of crushing cavity and particles-layer-pressure protection decrease the abrasion, making the service time 30%~80% longer than traditional cone crusher.
Product name Moringa seed, moringa kernal, moringa oil, moringa tea, moringa seed powder etc Product description Moringa oleifera lam: This species is one of the world's most useful plants. Though apparently native only to restricted areas in northern india and possibly extinct in the wild, m. Oleifera is cultivated in all the countries of the tropics. M. Oleifera is cultivated for its leaves, fruits, and roots for a variety of food and medicinal purposes. The young fruits (sometimes called "drumsticks" ) can be cooked in a number of different ways. An excellent oil is derived from the seeds, which is used for cooking and lubrication of delicate mechanisms. The leaves are extensively used as a vegetable in many parts of the world, and the root can be made into a condiment similar to horseradish (true horseradish, armoracia rusticana, is a member of the mustard family, brassicaceae). M. Oleifera is also of interest because of its production of compounds with potential clinical utility such as (4-(alpha-l-rhamnopyranosyloxy)benzyl glucosinolate. Other research has focused on the use of m. Oleifera seeds and fruits in water purification. 1-100 kgs
China Sealinepower Company limited Silent type air cooled diesel generator DG6500SE Frequency (HZ) 50HZ 60HZ Max.output (KW) 5 5.5 Rated output (KW) 4.6 5 Rated AC Voltage (V) 120,220,230,120/240,220/380 Power Factor 1 DC output 12V/8.3A Phase Single Phase/three phase Alternator Type Self-excited,2-pole, Single/three phase alternator(brush or brushless) Starting System Electric Noise Level (Dba/7m) 72-77Dba Fuel Tank Capacity (L) 12.5L Continues Running Time (hr) 14hr Engine Model: HR186FA Engine Type single-cylinder, vertical,4-stroke air-cooled diesel engine Max output of engine: 8.5HP/3000rpm 9.2HP/3600rpm Bore X Stroke (mm) 86 72 Displacement Capacity(cc) 411cc Fuel Consumption Rate(g/kw.h) 285 Fuel 0# or -10# light diesel oil Lubrication Oil Volume (L) 0.75L Combustion System Direct Injection.
37.2CC Gasonline Chainsaw Engine Specification 1.Engine type:casoline engine,2-stroke,one cylinder,air-cooled 2.Displacement:37.2CC 3.Engine power:1.3KW 4.Carburetor type:Diaphragmatic 5.Starting system:Recoiled,iuauel 6.Fuel mixed ratio:Gasoline:Engine oil(25:1) 7.Lubrication type,asw-chain:Automatic 8.Oil fuel tand capacity:0.21L 9.Fuel tank capacity:0.39L. Cutting Device 1.Length of guide bar,saw-chain:16"or 18" 2.Cog gap:0.375" or 0.325" 3.Chain manufacturer:Carlton/Oregon/Made in China Product Character 1.Easy start design for faster and easier starting to save power 2.With gas pump design for faster starting,to guarantee starting in 3 times 3.Double wholes design of muffler,lower nosies,better function and appearance 4.Double action of brake designing,more security guarantee Packing size 43x26x29.5CM Net weight 5.2KG.
It produces one-side film-coated paper cup through the procedure of automatic paper feeding, sealing, oil silicon lubrication, bottom punching, heating, knurling, curling and cup discharge. This kind of cup can be for tea, coffee, milk , ice-cream etc. Jbz-b type single pe coated paper cup machine is the automatic environmental machine with multi-running positions. This machine runs a whole procedure of paper-feeding, cup-fan-wall sealing, oiling, bottom-punching, heating, rolling, rimming, rounding and tripping. It is an idea equipment of producing drinking cup, ice-cream cup and other food cone-shaping containers. This type paper cup machine mainly used to making one side pe coated paper cups from 3 oz to 12 oz or above 12oz. Technical date: Suitable size:3ozf+12oz and other special size Raw material:single side(one side) pe(polyethylene) film coated paper Suitable paper weight150--400 gsm (recommend 180--300 gsm) Ration productivity:45--55/min Total power :5kw Net weight:1500kg Gross weight:2000kg Power:220v 380v Overall dimensions :2580l*1200w*1600h(mm) H.S. Code844130900.
Chassis Brakes Front : Disc brake Brakes Rear : Disc brake Color : Solid Black/Champion Yellow No. 2 Curb Weight : 112 kg (247 lbs) Final Drive : D.I.D 520MXV, 114 links Fuel Tank Capacity : 6.2 L (1.6/1.4US/Imp gal) Ground Clearance : 350 mm (13.8 in) Overall Length : 2185 mm (86.0 in) Overall Width : 830 mm (32.7 in) Seat Height : 955 mm (37.6 in) Suspension Front : Telescopic, coil spring, oil damped Suspension Rear : Link type, coil spring, oil damped Tires Front : 80/100-21 Tires Rear : 110/90-19 Transmission : 5-speed constant mesh Wheelbase : 1480 mm (58.3 in). Engine Bore Stroke : 96.0 mm (3.780 in) x 62.1 mm (2.445 in) Compression Ratio : 12.2 : 1 Engine : 4-stroke, liquid-cooled, DOHC Fuel System : Fuel injection Ignition : Electronic ignition (CDI) Lubrication : Semi Dry sump Starter : Primary kick. DHL Cargo.
Chassis Brakes Front : Disc brake Brakes Rear : Disc brake Color : Yellow Dry Weight : 101.5 kg (224 lbs) Final Drive : D.I.D 520MXV, 114 links Fuel Tank Capacity : 6.2 L (1.6/1.4US/Imp gal) Ground Clearance : 350 mm (13.8 in) Overall Length : 2185 mm (86.0 in) Overall Width : 830 mm (32.7 in) Seat Height : 955 mm (37.6 in) Suspension Front : Telescopic, coil spring, oil damped Suspension Rear : Link type, coil spring, oil damped Tires Front : 80/100-21 Tires Rear : 110/90-19 Transmission : 5-speed constant mesh Wheelbase : 1480 mm (58.3 in). Engine Bore Stroke : 96mm x 62.1mm Compression Ratio : 12.2 : 1 Engine : 4-stroke, liquid-cooled, DOHC Fuel System : Fuel injection Ignition : Electronic ignition (CDI) Lubrication : Semi Dry sump Starter : Primary kick. DHL cargo.
Chassis Brakes Front : Disc brake Brakes Rear : Disc brake Color : Yellow Dry Weight : 96 kg (212 lbs) Final Drive : D.I.D 520DMA2, 114 links Fuel Tank Capacity : 8.0 L (2.1/1.8 US/Imp gal) Ground Clearance : 350 mm (13.8 in) Overall Length : 2170 mm (85.4 in) Overall Width : 830 mm (32.7 in) Seat Height : 950 mm (37.4 in) Suspension Front : Telescopic, pneumatic/coil spring, oil damped Suspension Rear : Link type Tires Front : 80/100-21 51M Tires Rear : 110/90-19 62M Transmission : 5-speed constant mesh Wheelbase : 1465 mm (57.7 in). Engine Bore Stroke : 66.4 x 72 mm Compression Ratio : 8.6/10.4 : 1 (Ex valve open/Ex valve close) Engine : 2-stroke, liquid-cooled Fuel System : KEIHIN PWK38S, single Ignition : Electronic ignition (CDI) Lubrication : Fuel/oil premixture of 30 : 1 Starter : Primary kick. DHL cargo.
Perkins diesel generator 100kw perkins diesel generator Model: cd-p 100kw (open frame type) Power by perkins lovol engine Continuous power (50hz): 100kw/125kva Stanby power(50hz): 110kw/137.5kva Engine model: 1006tag Engine power (50hz): 121kw Speed: 1500rpm Engine configuration: 6-cylinder in line. 4-strokes. Engine cooling mode: turbocharged air-to-air charge cooled Speed control system: mechanical speed controller, electricity-magnet valve control switch(optional) Start model: 24v direct current start Engine filter system: dry air filter type, fuel filters, lube filter. Engine total displacement: 5.99l Compress ratio: 17.5: 1 Bore stroke: 100 127 Specific fuel consumption: ín 208g/kw. H Lubricating oil consumption: ín 1.4g/kw. H Oil capacity: 19l Alternator model: brushless 100kw Alternator power: 100kw/125kva Rated voltage/frequency: 380v/220v 50hz Power factors: 0.8lag Phase: 3-phase & 4 line Stable voltage regulator: ín ía 3 Insulation class/protection grode: h class/ip 23 Dimension: 2200 900 1700 with base fuel tank Weight: 830kgs
Power:2.2KW~15Kw(3HP~20HP) Capacity:0.1m3/min~3m3/min(3.5CFM~105CFM) Pressure:0.5Mpa~6Mpa(70Psi~870Psi) 1,Ring valve structure,Swedish stainles steel valve plates are adopted,after such treatments as precisely turning ,grounding and stress relieving,the product boasts an excellent tenacity and resistance to impact under high temperature . 2,Cylinder cap's cooling fin boasts an extensive area so as to achieve good heat rejection . 3,Cast iron piston (for some kinds of models) has a small thermal expansion and accurate gap control ,so that even under ultra-temperature,cylinder expansion will not occur. 4,Double-oil ring structure is adopted to guarantee the sufficient lubrication for both the piston and cylinder,while oil mix will not occur. 5,Packing rings are produced by famous enterprise,so that the wear-resisting is good and fuel consumption is small.Also,carbon deposit will not occur. 6,High strength magnesium iron connecting lever(some kinds of models)boasts good parallelism and high buckling strength after the specialized precision work.
Instructions: 1.The feeder series are built with a very solid steel structure,with high precise feeding and folded mould. 2.The machine feed freely with no tension, regulating the position quickly and conveniently. 3.There is a save-power device to assist the foil roller.It is convenient to change foil. 4. The female roll can work continuously in a very long time,as we imported a constant-temperatured brake device. 5..We adopt Izumií»s IDEC PLC(Programmable Logic Controller) in Japan to the system of the feeding length.Therefore, it has strong competence and great flexibility. It has great function, such as language converting,counting and rememering. 6. We research and developed pinch head by combiting our long-term experience of designing the packing machine in this field.We initiate firstly pinch head in this field. The pinch head is design from elastic splint.And it can be adjusted from 0mm to 300mm. The pinch head can match mould with different height.In that case,it has no effect on die change. 7. The foil feed system can put foil easily and simply.As it has an oil tanker with great capacity,it is very easy to lubricated and add oil. 8. Based on this foil feed system, we have engineered his new emboss to have an ever lasting quality and at the same time to be as smooth as possible.
A set of 5x5 bearings in horizontal and vertical planes for better straightening of input wire. Computer designed and precision manufactured Cam along with balanced critical parts resulting in low vibration and reduced noise level. Automatic centralized periodic lubrication system with pressure and oil level sensing, ensuring long trouble-free operation. The bevel gears are totally enclosed in oil chamber and require no attention, except periodical checks. Heavy and robust cast iron base and body to dampen the vibration. Hardened and ground high precision shafts, slides and die-box for longer life. Suitable for using the Tungsten Carbide tools as well. No contact between Header-Punch and Ejector, resulting in long ejector life and reduced noise. Round index able gripping dies with 8 grooves, enabling eight times longer service without any reprocessing. Technical specification : Wire Diameter S.W.G. (mm) : 15 - 9 (1.8 - 3.6) Nail Length mm (inch) : 25 - 75 (1" - 3") Max. Nails/min. : 500 Power Required hp/kW : 5 / 3.7 Sea Worthy Packing
Dimensions (mm): 3220 x 1170 x 1150mm Dry weight: 345kg Max. output: 85.0 kw /8000r/min Max. Fuel consumption: 28 L/H Cruising range at full throttle: 2.14hr Trolling speed: 1600-1700 r/min Engine type: 4 stroke, 4 cylinders, water cooled Displacement: 1352 cm3 Bore & Stroke: 71 x 82.2 (2.83 x 2.62) Compression Ratio: 11.1 : 1 Lubrication system: Dry sump Start system: Electric start Ignition system: V- AH TCI Battery Capacity: 12- 28 Charging system: Fly wheel magneto Propulsion system: Jet pump Jet pump type: Axial flow, single stage Impeller rotation: counterclockwise (viewed from rear) Jet thrust nozzle horizontal angle: 24+24 degree Fuel and Oil: Recommended fuel : Regular unleaded gasoline Fuel tank capacity: 50 L Engine oil quantity: 4.3 L Max. person on board: 3 persons Max. load capacity: 240GK Packing size: 3300 x 1120 x 1150mm GW: 380KG Loading quantity: 4PCS/20í»GP 12PCS/40í»HQ
Engine Type:4-Strokes,150cc Air Cooled > Transmission System: Chain Drive > Bore x Stroke(mm):56.6X57.8 > Piston Displacement:149.5 > Maximum Power(kw/R/min):6.5/7500 > Maximum Torque(N. M. R/min):9/6000 > Starting System: Electric Starter > Transmission: V-belt CVT > Seat Height(mm):720 > Min Turning Radius(mm):2000 > Ground Clearance:100 > Brake(Front/Rear): Drum/Disc > Tyre, Fromt: AT19 X 7-8/2.9 Psi > Tyre, Rear: AT18 X 9.5-8/2.9 Psi > Ignition Type: C. D. I > Fuel Tank Capacity(L):7.8 > Front Suspension: Independent suspension > Rear Suspension: Monoshock Swing Arm > Parking Brake: Mechanical Lock > Battery:12V-9Ah > Max Load Capacity(kg):95 > Engine Oil Capacity(L):0.9 > Gear Oil Capacity(L):0.11 > Dry Weight(kg):150 > Rider Capacity:1 Person > Wheel Base:1080 > Lubrication: Pressuring splash > Product dimensions:1700(L) x 980(W) x 1100(H)mm > Compression Ration:9.2:1 > Cylinder Arrangement: Single Cylinder
LF200ST Transmission type: shaft Bore x stroke: 63x62 Displacement(ml): 193.3 Max power/rotate speed(kw/rpm):10.5/8000 Max.Torque/rotate speed (n.M/rpm): 13n.M/6000r/min Start type: electric Gear change:manual clutch 4 gear international with inside reverse, Seat height(mm):760 Min. Turning semidiameter(mm): 2850 Ground clearance(mm): 100 Brake type: drum/ drum Front wheel: 19x7-8 Rear wheel:18x9.5-8 Ignition type: c.D.I Fuel capacity(l): 4 Front shock absorber: independently suspension Rear shock absorber: single swig Front suspension:single swing Rear suspension:integrity swing Battery: 12v-9ah Load weight(kg):150 Climb abitlity: 28degree Oil capacity: 1.5l Gearbox oil capacity:0.28l Load person: 1person Axle distance:1010mm Lubricate type: splash& compression Vehicle dimension:1560x910x1235 packing dimension(mm)·ª1470x850x770 quantity of loading ·ªiron frame+ plastic bag +carton 40f½fcl:66 units 40f+hq:66units 20f+fcl:30units Net weight:145kg Gross weight:170kg
1. Product Name Trade Name: 3165 Lithol Bordeaux 2R C.I. Number: Pigment Red 63:1 CAS Number: 6417-83-0 EU Number: 229-142-3 Chamical Family: Mono azo 2. Physical, Chemical and Fastness Properties Molecular Weight: 460.49 Molecular Formula: C21H12N2O6SCa P.H. Value: 7.0-8.0 Density: 1.4 Oil Absorption ml/100g : 45-55 Light Fastness: 5 Heat Resistance: 140 Water Resistance: 4 Oil Resistance: 4 Acid Resistance: 4 Alkali Resistance: 4 3. Application Shade: Bluish Red Main Application: Offset Ink, Industrial Paint, Plastics, Rubber, Textile Printing, Stationary
1. Product Name Trade Name: 3262 Fast Pink Toner / Lake C.I. Number: Pigment Red 81 CAS Number: 12224-98-5 EU Number: 235-424-7 Chamical Family: Xanthene 2. Physical, Chemical and Fastness Properties Molecular Weight: ------ Molecular Formula: ------ P.H. Value: 6.5-7.5 Density: 1.5 Oil Absorption ml/100g: 45-55 Light Fastness: 4 Heat Resistance: 120 Water Resistance: 4 Oil Resistance: 5 Acid Resistance: 3 Alkali Resistance: 2 3. Application Shade: Bluish Red Main Application: Solvent-Based Ink, Offset Ink, Water-Based Ink, Industrial Paint, Stationary
1. Product Name Trade Name: 3124 Fast Red BBS BBSP C.I. Number: Pigment Red 48:3 CAS Number: 15782-05-5 EU Number: 239-879-2 Chamical Family: Mono azo 2. Physical, Chemical and Fastness Properties Molecular Weight: 506.44 Molecular Formula: C18H11ClN2O6SSr P.H. Value: 7.0-8.0 Density: 1.8 Oil Absorption ml/100g: 45-55 Light Fastness: 6 Heat Resistance: 180 Water Resistance: 4 Oil Resistance: 4 Acid Resistance: 4 Alkali Resistance: 5 3. Application Shade: Bluish Red Main Application: Solvent-Based Ink, Offset Ink, Water-based ink, Industrial Paint, Plastics, Rubber, Textile Printing, Stationary