Standard:astm b231, csa c 49, bs 215, din 48201, iec 61089, etc Capacity:2000ton/month All aluminum conductors are widely used for its following features: Optimum economy is provided since the lighter weight means lower unit length coats, easier handling in installation and less-complex fittings. All-aluminum conductors have an inherent high corrosion resistance due to their homogeneous construction. Aac conductor has high current carrying capacity It is widely used for its excellent resistance to corrosion, thus ideal for use in coastal areasuitable for low & medium voltage lines in urban are. Specification Applicable standards: astm/bs/csa/din/iec standards Concentric lay stranded aluminium conductor (aac) is made up of one or more strands of hard drawn 1350 aluminum alloy. Bare all-aluminum conductors (aac) are concentric-lay-stranded, consisting of one or more layers of wire wrapped helically around a straight round central wire. Each successive layer has six wires more than the layer immediately beneath. Greater flexibility is provided by increasing the number strands for a specific cross-sectional area. The more commonly used strandings are 7, 19, 37, 61 and 91.
Standard:iec Voltage:300/500v, 450/750v Capacity:2000km/month Multiple core applicable Extra flexible applicable Flat shape appliable Nominal sectional area:0.5-400mm2 1.Conductor Solid or class b or class c stranded copper 2.Insulation Pvc General purpose wiring for lighting and power - residential, commercial, industrial buildings in accordance with the national electrical code, maximum conductor temperature of 75°c in wet or dry locations, for circuits not exceeding 600 volts
Standard:astm b230, b231, b232, b399, icea s-61-402 and s-66-52, voltage:600/1000v, capacity:10000km/week, the product is used primarily for, but not limited to, overhead secondary distribution lines. Installed on insulators, otherwise treated as a bare conductor., ease of erection and stringing, practically no tree-trimming required, less maintenance, relative immunity to short circuits caused by external forces (wind, fallen branches), unless they abrade the insulation., , aluminum alloy 1350-h19, 6201, or acsr conductors, concentrically stranded, covered with polyethylene or crosslinked polyethylene (xlpe). The covering provides circuit protection against momentary contact with other conductors or trees. Because the covering carries no voltage rating, the conductors must be installed on insulators adequate for the intended service voltage. The user should consider the dielectric compatibility of the covering, insulator and conductor/insulator tie., 1.Conductors are available in the following constructions:, aluminum conductor, steel reinforced (acsr), concentric-lay stranded, aluminum alloy 1350-h19 hard-drawn, concentric-lay stranded, medium hard-drawn copper, solid or concentric-lay-stranded, 2.Covering material
Wire Cutting EDM Consumable Hard Brass Wire 0.20mm 0.25mm This brass wire is widely used in Low Speed one-way walk Wire cut Electrical Discharge Machining Machine, such as Sodick, Fanuc, Charmiller, Mitsubishi, Hitachi etc. Brass EDM Wire Features: 1. Type: Hard 2. Wire diameter: 0.20mm, 0.25mm 3. Material: CuZn35 4. Alloy or not: Alloy 5. Ultimate strength (N/mm2): 980 6. Conductivity: 22%-25% 7. Talarance: +/-0.001mm 8. Grade: First 9. Fitting machines: All EDM wire cut machines such as Sodick, Fanuc, Charmiller, Mitsubishi 10. Packing: 5kg/spool, 4 spools in a carton box 11. MOQ: 1 box (20Kg) Our EDM consumables and spare parts range: EDM brass wire EDM Zinc coating wire EDM Moly wire EDM filter EDM resin EDM Rust Remover EDM Consumables Wire guide, power feed contact, rollers, water nozzle, belt, discharge cable, etc. EDM Electrode Tubes EDM drilling tool Full range EDM accessories solution! Brass edm wire, brass wire edm, brass wire, brass wire 0.20, edm brass wire 0.25, edm brass wire, brass wire for wire cut, brass wire consumables, edm wires, brass wire hard, edm brass wire china, brass wire for edm, edm hard brass wire
Original p/n: m1605a Original hp m1605a 3 leads ecg leadwire Latex free One year warranty 1pcs/bag
12 core lc din rail patch panel 6 lc duplex adapter type Easy to install and with a compact design, the gigamedia dinfo box allow the user to connect up to 12 fibers. This box is a real added value that allows mixing fiber ressources with electrical ressources inside industrial cabinets. Loaded with 6 lc duplex adapters , 6 sc duplex adapters 6 sc duplex / st hybrid adapters 6 lc duplex adapters 6 lsh (e-2000®) compact adapters All is available . Integrated splice holders (fusion splices) Ip20 protection 2x rear entries (pg 11 cable gland) Grey color (ral 7035) Temp range : -40 °c to +70 °c Dimensions : 37 (w) x 129 (h) x 140 mm Other configurations on demand Splice box for support rail , different assembly versions are possible Removable splice tray with crimp splice holder for up to 24 splices Easy and quick removal of the splice tray Fiber reservoir Cable inlet from top or bottom, straight or angled, with 4 x m20 cable gland Available unequipped, partly and fully equipped -
The 9/125µm single mode fiber patch cable meets RoHS compliant, and all cables are 100% optically tested for insertion loss to ensure high quality, it is very cost-effective for network cabling. Spring also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc. ConnectorLC to LCJacket OD2.0mm Fiber Mode9/125µmJacket ColorYellow PolishUPC to UPCWavelength1310/1550nm Fiber TypeDuplexJacket MaterialPVC Insertion loss=0.3dBInterchangeability=0.2dB Return loss=50dBVibration=0.2dB Operating temperature-40~75°CStorage temperature-45~85°C PolarityA(Tx) to B(Rx)Fiber GradeG652D -
Hot-dipped galvanized iron wire:,(4.0mm, 0.19mm) Electro galvanized iron wire:,(4.0mm, 0.15mm) Mesh wire:8#--36# Electro zinc coated:8-15g/m2 Hot-dipped zinc coated:30-60g/m2 Galfan zinc coated:over 245g/m2 Purpose:widely used in communication equipment, medical equipment, weaved mesh, brush, tightwire, filter slice, high pressure pipe, architecture, artcraft and so on. Feature:corrosion-resisting, oxidation-resisting, solid and durable Processing: wire drawing, acid washing, and rust removing, annealing and coiling Packing:coil or spool. Inside with plastic film and outside with hessian or inside with plastic film and outside with woven bag. Common weight per coil: 0.4kg-42kg small coil. 50kgs-100kgs big coil (other weights are available as customers' request). Applications:mainly used in industry, agricuture, stock raising, telecommunication equipment and materials, medical equipment and device construction and steel rope.
Material: black annealed iron wire and galvanized iron wire. Features: pvc coated iron wire offers excellent corrosion resistance and anti-aging property and longer service life compared with common galvanized iron wire. Colors:green coated iron wire, grey coated iron wire, black coated iron wire or yellow coated. Uses:the most popular use for pvc coated wire is in the construction of chain link fences for industrial security fences, freeways and tennis courts. It is also used in other applications such as coat hangers and handles.
We can produce u type series carbon steel wire according to customers' requirements. U type iron wire sizes: wire gauge 18#-22# (wire diameter from 0.7mm to 1.2mm). U type wire length: according to our customers' needs. U type iron wire materials: black annealed wire, electro galvanized wire, hot-dip galvanized wire and so on. Packing: according to our customers' requirements.
Cut wire used in binding up construction materials or other items. Straight cut wire is made of galvanized iron wire straightened then cut into pieces of various length according to your requirement. Standard wire diameter of cut wire: 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.45mm, 1.5mm.
We produce tie wire at length: 4"-14", the diameter from 0.8mm to 1.6mm. Usage: Securing trees, vines and creepers to supports and trellises. Tying bags for grain potatoes, wood, lime, coal, seed, chemical, etc. Bundling products of wire, rod, wood tube, cane, pvc etc; An inexpensive packaging for storage or quantity control and for binding line wire to fence posts or securing mesh to line wires or even repairs; fixing or reinforcing steel for buildings, swimming pools etc; Packaging of carpets, fabrics, etc. For storage and dispatch.
Material: 304 304l 316 316l Sizes: wire diameter range from 5mm to 0.025mm Applications: redrawing of wire, weaving of wire mesh, making of soft pipes, steel ropes, filter elements, braided wire, spring, etc. Variety: hard wire, soft wire, coil wire, spool wire.
We can produce u type series carbon steel wire according to customers' requirements. U type iron wire sizes: wire gauge 18#-22# (wire diameter from 0.7mm to 1.2mm). U type wire length: according to our customers' needs. U type iron wire materials: black annealed wire, electro galvanized wire, hot-dip galvanized wire and so on. Packing: according to our customers' requirements.
A demister, or also known as mist eliminator, is a high efficiency separation device often fitted to vapor liquid separator vessels to enhance the removal of liquid droplets entrained in a gas or vapor stream. Demisters may be a mesh type coalescer, vane pack or other structure intended to aggregate the mist into droplets that are heavy enough to separate from the vapor stream. Mist eliminators/ demisters are fabricated from knitted materials with interlocking asymmetrical loops of metal or plastic with typical diameters being 0.1 – 0.3mm. Special applications for wire diameter 0.35mm to 0.024mm, tube width 1/4" to 42" diameter. 2.DEMISTER Materials: Stainless Steel wire: 200, 300 and 400 series-AISI201?202?301?302?304?304L?321?316?316L,410S, etc. Copper wire, Aluminium wire, Nickle wire, Titanium wire, Inconel, Monel, Hastelloy wire... Plain Steel, Galvanized Steel... Polypropylene, Polyethylene, PVC, Teflon(PTFE), Nylon, etc. Stainless steel wire with cotton thread, fiber glass, etc. 3.FIXING METHODS&GRID The demister should be horizontally fixed and supported. At the bottom or both the top and the bottom, a support grid which is welded with FB 25X3t, RB6Ø of the same material as that of the demister pad at proper intervals (APP150mm), is used. For fixing the grid and the pad, RB6Ø or 1.6Ø tie wire is used. 4.DEMISTER FEATURES (Mesh Pad type) 1).It shows 99% efficiency under general conditions and velocity (1~3m/sec or higher). 2). Over 98% open area is guaranteed under any conditions so pressure drop caused by the use of the demister can be disregarded (0.1”~1.0 W/G). 3). It can be made of any material suitable for the given temperature and corrosion-resistance. 4). It is possible to install by use of M/H so it is easy to handle. 5). There is no restriction in the conditions, place, and size for use. It is install-able on the existing systems. 6). Self-cleaning is possible. It is semi-permanent so it is economical. 5.USE OF DEMISTER 1).Vacuum Tower - The treatment quantity by the demister goes up by 35%. The quality of oil gas is improved. 2). Absorber - Some gasoline plants use a glycol absorber (Demister mounted) so the installation cost is being repaid within a month. 3). Knockout Drums and Separators - If Demister is used, ?inch drum is sufficient. 4). Gas Separator Vessels - Hydrocarbon in gases is collected so gas of 1/0.1 billion purity is produced out. 5). Evaporator - Product loss goes down and purity is remarkably improved. 6). Scrubber - In the field of caustic soda, the demister is used to prevent air pollution. 7). Distillation Column - If Demister is used, the cost for distillation goes up, the quantity of treatment increases by 20%, and purity is remarkably improved. 8). Dust Collectors - The dust collector of a wet type has excellent collection capacity.g is possible. It is semi-permanent so it is economical.
wire harness wire type: 26AWG connector: JAE connector Application: mechanical equipment
black wire drawing form wire rode high carbon used to many industries like mattresses manufacture lot 50 ton the coil 500 kg and may be increase
Gate Hardware..
Used printers.
Printers.Distributors
