Lactic acid esters of mono- and diglycerides of fatty acids (LACTEM) Characters: White powder or flake solid which is easily soluble in oils and hot grease, insoluble in cold water and can be dispersed in hot water, Chemical Structure: Applications: It has emulsifying, stabilization, dropping viscocity, control grease crystallization,resist starch aging, increase the gas-holding function. (1) Used in watery cream, and its stable, homogeneous, fine and smooth. (2) Used in meat products, avoid the water and oil separation. (3) Used in various grease, improve the compatibility of water and oil, avoid the water and oil separation. (4) Increase the dough toughness and gas-holding function, improve the construction, increase the bakery volume Usage and doseï¼? (1) Put this product into warm water at about 60â?? to get paste shaped substance, then use it as the suitable scale. (2) Used into watery cream, the max. dose is 5g/Kg, for others foods, can be used as the request. Technical Index: Acid Value(Calculated by KOH / (mg/g) â?¤6.0 Free Gycerol1.0 1-ester contentï¼?w/%ï¼? â?¥80 Ignition residue0.1 Total lactic acidï¼?w/%ï¼? 20-38 Unsaponifiables2.0 Moisture0.5 Pb /(mg/kgï¼? â?¤0.5 Packagingï¼? Aluminium foil bag vacuum packing with nitrogen inside, 25kg/carton(5kg/bag*5) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.
LI 13.000 S GI DI Double insulation suspended baskets Lamp bulb replacement, energized power grids (46 kV insulated class) maintenance, telephone networks maintenance, facade cleaning, banners, signs and boards installation and removal, tree pruning, as well as seed gathering in reforestation area and education and research institutions. Categoria: Baskets - Double insulation
Name:ductile iron fittings accessories ductile iron saddle pipe for DI pipe Standard:BSEN545 OR ISO2531 Material:Ductile iron Specificate:DN40-2600 Surface treatment:Bitumen outside and inside Payment:L/C OR TT Warranty:12months Customized support:OEM, ODM, OBM Place of Origin:QINGDAO,CHINA Brand Name:VTM Technics:Casting Body material:DUCTILE IRON MOQ:1 Pcs Application:Water Pipeline Packing:plywood case or pallet any questions, please contact me without hesitate
Name:DUCTILE IRON PIPE FITTINGS CAP FOR DI PIPE Standard:BSEN545 OR ISO2531 Material:Ductile iron Specificate:DN80-1400 Surface treatment:Bitumen outside and inside Payment:L/C OR TT Warranty:12months Customized support:OEM, ODM, OBM Place of Origin:QINGDAO,CHINA Brand Name:VTM Technics:Casting Body material:DUCTILE IRON MOQ:1 Pcs Application:Water Pipeline Packing:plywood case or pallet any questions,please contact me without hesitate
Name:double socket duckfoot bend for DI PIPE Standard:BSEN545 OR ISO2531 Material:Ductile iron Specificate:DN80-1200 Surface treatment:Bitumen outside and inside Payment:L/C OR TT Warranty:12months Customized support:OEM, ODM, OBM Place of Origin:QINGDAO,CHINA Brand Name:VTM Technics:Casting Body material:DUCTILE IRON MOQ:1 Pcs Application:Water Pipeline Packing:plywood case or pallet any questions,please contact me without hesitate
Shenzhen PMZ company sells the original Delta products. Delta RMC151E-H2-UI� Delta RMC150E-S2-DI/O Delta RMC150E-S2 Delta RMC151E-S2-H2-UI/O Delta RMC75E-AA1-A2 Delta RMC75E-AA1 Delta RMC75E-MA2-A2  Delta RMC75E-MA2-AP2-AP2 Delta RMC-151E-S2-H2 Delta RMC150E-S2-H1-D1 Delta Exp70-A2 � � � � Delta RMC150E-S2 � Delta RMC151E-S2-A2� Delta RMC75E-AA2-AP2-D8 Delta RMC75S-AA2-AP2-D8 Delta RMC75E-AA1-AP2-D8 Delta RMC75S-AA1-AP2-D8 Delta RMC150E-H3-DI/O-PROFI Delta RMC151E-H3-DI/O-PROFI HYDRAFORC MR10-47D-6T-N
Ductile Iron Quick Flange Adapter for PE/PVC PIPE 1.Material Specification: Body Ductile Iron Gasket EPDM Flange Drilling PN10/PN16 Coating FBE 2.Application: DI QUlCK Flange Adaptor can be applied to Ductile Iron Pipe,Cast Iron Pipe,Steel Pipe,and ect..Brass Ring will fasten the pipe.With Brass ring ,this kind of quick flange adaptor can be used for PE Pipe
Unique Designed - 3 Layers , Non woven Comfortable elastic earloop, extra-soft ear loops eliminate pressure to the ears. Inner layer is made of soft facial tissue, no dye, gentle to the skin Amazon Fulfilled and ships from USA amazon warehouse. Fastest Delivery. 50Pcs Disposable Mask: Includes 50 pcs blue disposable face masks, these are enough to meet your family demands One Size Fits Most - Our face masks are suitable for adults and children making them ideal to keep in your home in case of an emergency Widely Application - Perfect mask when travelling through congested airports bus terminals malls parks and busy city streets
We specialize in automotive metal stamping dies design and manufacturing. Our main business is for small to middle size progressive dies, transfer dies and single stations dies building. Especially for car roofs, seats and battery support brackets. With more than 15 years experience of die analysis, design,machining, assembly and tryout, every detail was strictly under control from quotation analysis and manufacturing to tooling final buyoff. Main Advantages: 1. Refining team with 53 people, reaction flexible, messages communication fast, short lead time. 2. Tryout press with 1000 ton (5000*2000mm), 400 ton, table size 3200*1400mm and one 200 ton press could be able to build a lot of middle size tools. 3. Charming management cost. 4. Located in a convenient city Dongguan area where close to Shenzhen port, international airport of Guangzhou, Shenzhen and Hong Kong.
Material: ductile iron ï¼?DIï¼?; standard: ISO2531,BS EN545, BS EN598, AWWA C219, AWWA C110, ASME B16.42; internal lining: â? cement mortarâ?¡Sulphuric Resistance Cement â?¢Sulphuric Resistance Cement and Epoxy â?£H.A.cement; external coated: â? zinc and bitumenâ?¡zinc and 2 epoxy coatings â?¢Metallic Zinc and a coating of suitable etching prima and 2 Epoxy Coatings â?£zinc and PU; suitable medium: potable waterã??drainageã??sewageã??waste water; suitable tempreture: -40°ï½? 125°; packing: plastic film plus pallet; origin: China.
Material: ductile iron ï¼?DIï¼?; standard: ISO2531,BS EN545, BS EN598, AWWA C219, AWWA C110, ASME B16.42; internal lining: â? cement mortarâ?¡Sulphuric Resistance Cement â?¢Sulphuric Resistance Cement and Epoxy â?£H.A.cement; external coated: â? zinc and bitumenâ?¡zinc and 2 epoxy coatings â?¢Metallic Zinc and a coating of suitable etching prima and 2 Epoxy Coatings â?£zinc and PU; suitable medium: potable waterã??drainageã??sewageã??waste water; suitable tempreture: -40°ï½? 125°; packing: plastic film plus pallet; origin: China.
Flavorless vulcanizing agent ACTOR-BIBP Chinese Name: 1,4-di-tert-butyl peroxide isopropylbenzene; alpha, alpha'-di-tert-butyl peroxide diisopropylbenzene; bis [1-(tert-butyl peroxide) -1-methyl ethyl] benzene; bis (tert-butyl peroxide) p-diisopropylbenzene; _, _'-di-tert-butyl peroxide diisopropylbenzene English Name: 1,4-Di-(2-tert-butylperoxyisopropyl) benzene; ALPHA, ALPHA'-BIS (T-BUTYLPEROXY) -DIISOPROPYL-BENZENE; BIS [1-(TERT-BUTYLPEROXY) -1-METHYLETHYL] BENZENE; Bis (tert-butyldioxypropyl) benzene; BIS (T-BUTYLPEROXY) BENZENE Cas: 25155-25-3 Molecular formula: C20H34O4 Molecular weight: 338.48 Product introduction: vulcanizer BIBP belongs to peroxide crosslinking agent. Free radical crosslinking is carried out during vulcanization process. It has high crosslinking density for rubber products, and no irritating odor is emitted during crosslinking process. It does not pollute the environment. Suitable vulcanization methods are: moulding vulcanization, steam tank vulcanization, high temperature continuous vulcanization. Properties: insoluble in water, partly soluble in ethanol, ether, benzene, carbon tetrachloride and other organic solvents. Density: 1.63 g/mL at 25 degrees C (lit.) Indicators: Date index Item Project (lot, No) 0028 (Date production) 20110528 Appearance/appearance offwhite crystal white powder Theoretical active oxygen content (%) (>98) Pass rate of 320 meshes% 99 M, P (capillary pipe) melting point 45-55 C Water content moisture content less than 0.40 Ash content (950 C, 2hr) ash% less than 0.40 Content% 70% Usage: This product can be used as crosslinking agent of polyethylene (PE), ethylene-vinyl acetate copolymer (such as EVA foaming), chlorinated polyethylene rubber (CPE), ethylene propylene diene monomer (EPDM), chlorosulfonated polyethylene, tetrapropyl fluororubber (TP-2), saturated hydrogenated nitrile butadiene (HNBR), silicone rubber and other rubber and plastics. Under the same crosslinking effect, the addition amount is about 2/3 of DCP. There is no irritating odor in the process of operation and the products made. Especially suitable for indoor soft wire insulation cross-linking and EVA foam products, such as high-voltage rubber hose, air conditioning rubber cable, EVA foam toys, etc. Storage: Keep in a sealed, cool and sealed condition. Avoid exposure to sunlight and severe vibration when transporting. Avoid heating, forbid mixing with strong acid and reducing agent. Packing: 25kg/drum
Granulated di-ammonium phosphate-dap-(18-46-0) we are offering dap granules (used as agricultural fertilizers/ wool colloidal dyes/ brewing/ sugar purifying/ cigarettes and tobacco industry). Moreover, we are also offering flexible and attractive delivery prices (cfr, cif and door to door prices). Specifications: chemical formula: nh4(po4)2 appearance: brown yellowish granules hardness: 4 kg min moisture content: 1.5% max total phosphate (p2o5): 45.5% â?? 46.5% citrate soluble phosphate (p2o5): 43.5% - 44.5% water soluble phosphate (p2o5): 40.5% - 41.5% total nitrogen (n): 17.5% - 18.5% packaging: 25 kg, 50 kg or jumbo pp woven with pe lining or hdpe please contact our supportive
High Pressure Seamless Steel Gas Cylinders used for storing & dispensing of High Pressure gases like CO2, O2, N2O, etc used in various applications like fire fighting, medical, industrial, beverages, diving, etc.
Item Description Description 2014 High Quality Manufacture Metal Stamping Die Type Progressive stamping die , compound die, single die,progressive die Material SKD11, D2, SKH51, SKD61, Cr12MoV ,etc Work piece Material Alloy steel: SKD11, SKD61, Cr12MOV, SLD, DC53 High speed steel:SKH51, SKH9, YXM1 Stations / Steps According to the auto parts designing Productions Cover Sheet metal auto parts, Auto stamping parts, Home Electrics stampingparts, Device stamping parts, etc Productivity Max 400 pcs/min, normally 40-60pcs/min Work piece Precision: 0.005mm Mould Tolerance 0.001-0.003 mm Life Time Max 1 million times, normally 0.3-0.5million times Design Software AutoCAD, PRO/E, Solid works, UG(NX), Cimatron, MasterCAM Drawing Format STP, PRT, ASM, PDF, DWG, DXF,JPG,TIFF,PNG Surface Treatment Powder coating, Hot galvanized, Painting, Polishing, Brushing ,Chrome/Zinc/Nickel plating Certification ISO9001:2008 Service OEM / ODM service Machinery Equipments Milling, Grinding, Boring, CNC, EDM, WEDM, Forming Machine,Precision flat milling, Saw machine, Punching machine Testing Machine 100% Inspection, CMM, Projector, Microscope Supplying Report Material reports and Dimension test reports made from the originof the place Payment Terms T/T, L/C , West Union ,etc Advantage We are experienced in the mould design and process through ourcooperation with Japanese and USA companies in the past years.We had built our own factory in Dongguan and established long-term,and stable business relationships with other factories. Business Scope & Service Details All products can be customized according to different Nationalstandards and customer needs. As a trading & manufacturingcompany, PinYi is also involving in OEM & ODM outsourcingand collaboration, bespoke manufacturing of blue drawing,sample, raw material and originality products. We can provide clients with product design, competitive pricing, qualityassurance that fulfill their needs and logistics services. Standard JIS AISI DIN etc. Wooden case with PE bag and foam inside or as required
The one most popular Cinnamon is Indonesian one Product Introduction Cinnamon broken is a scraps from any cinnamon products, this is usually processed again to produce cinnamon powder to be sold in retail market or any food manufacturers, therefore we only procuring cleaned cinnamon cassia to ensure the quality after products Cinnamon is only known in Maluku (Ambon and Seram Island). The wood belongs to the softwood type and is white, with stem bark and roots containing essential oils. The bark smells of eucalyptus oil which in trade is called kulitlawan. Opposing skin oils are generally used for the treatment of heartburn (indigestion) and cholera disease. Until now skin oil is sold under the name lawang oil which is often used for rubbing drugs. The cinnamon plant has spread to almost all tropical countries. In Indonesia, Cinnamomum burmannii is widely found in West Sumatra, North Sumatra, Jambi, Bengkulu, West Answer, Central Java, East Java, and Maluku. Cinnamomun Grade and Technical Specification Quality : Superior Foreign matter : 0.5 % max Humidity : 13.5 max % Oil content : above 1.5 % Purity : 99 % min Grade : cleaned Appearance : well-dried, Cleaned skin, no mould or Fungus Origin : Indonesia Packaging : Jute bag or Carton box Nett Wight : 30 kg Gross Weight : 30.6 kg
Cashew Nuts W180, W210, W240, W320, W450 - Cashew Nuts SPECIFICATION OF RAW CASHEW NUTS Grade: White Wholes: W240, W280, W290, W320, W450 W500 Scorched Wholes: SW, SW180, SW210, SW240, SW320, SW450, SW500 S (Splits): LWP(Large white pieces), SWP(Small white pieces) - Color: White/ Light Ash - Style: Dried - Inspection: SGS - Moisture 7% max - Foreign matter 1%max - Broken 5% max - Nut count: 170 - 220 per kilogram - Out turn: 47 - 53 lbs - Defective: 10% maximum - Without presence of residue from pesticides or insects Raw and roasted Cashew Nuts 1. grade: w240, w320 - moisture: 5% max - broken: 5% max - melasma: 3% max - mould and fungus: 0% - admixture: 1% max - silk sell: 3% max - dent rate: 3% max 2. grade: ws - moisture: 5% max - foreign matter : 1%max - broken: vertical broken - live insect and larvas: negative - coliforms, salmonella: negative 3. grade: lp - moisture: 5% max - melasma: 3% max - admixture: 1% max live insect and larvas: negative - coliforms, salmonella: negative 1. Cashew nuts, like all nuts, are an excellent source of protein and fiber. 2. They are rich in mono-unsaturated fat which may help protect the heart. 3. Cashew nuts are also a good source of potassium, B vitamins and folate. They contain useful amounts of magnesium, phosphorous, selenium and copper. Nutrition Facts Serving Size 28g (~1 oz.) (Approx. 16.2 Servings/Pound) Amount Per Serving Calories 160 Calories From Fat 110 %DV Total Fat 14g 20% Saturated Fat 2g 13% Cholesterol 0mg 0% Sodium 0mg 0% Total Carbohydrate 8g 2% Dietary Fiber 1g 5% Sugars 2g Protein 5g Vitamin A 0% Calcium 1% Vitamin C 0% Iron 10%
Moulded Component
We provide various kinds of commodity moulds, such as plastic crate mould, plastic knife and fork mould, child seat mould. Therefore, we can meet your various needs. The most important thing is the rich experience of mold structure design and application. We have accumulated rich design experience and processing technology in the injection mold of skin grain, which has created unparalleled performance for the injection mold of skin grain. -Optimizing temperature control -Excellent cooling water design -Easy maintenance -The steel material is optimized for high precision machining -Long service life, durable, high performance
We are delivering advanced design of injection moulds with lifter, side core, rotating core, hot runner, three plate mould, etc.