1 Key Specifications/Special Features Meaning of the index lights on the panel Index light Name Light Flash 1 (6) Temp setting In the state of temp setting - 1 (7) Refrigeration Refrigerating Ready to refrigerate, in the state ofcompressor start delay protection 1 (1) Heat Heating Ready to heat, in the state of compressorstart delay protection 1 (2) Defrost Defrosting Dripping or the state of compressor startdelay protection 1 (3) Fan Fan running - 1 (4) Alarm - Alarm state Main Function Temperature display, temperature controlling(refrigeration/heat mode), compressor startdelay protection, it can run periodically with the on-off rate when the temperature sensor is broken. 2 defrost modes (electric heat, hot gas), 3 defrost start mode (time alternation, accumulative compressor running time, real time clock), 2 defrost end mode (timing, controlled by both temperature and time), dripping, manual defrost, 7 fan running modes(fan ahead or delay start, delay stop, temperature controlling start and stop, time controlling start and stop, always on,always off, run or stop when defrosting), high and low temperature alarm, sensor error alarm, one external alarm input, password, real time clock, C/F unit change. -
Key Specifications/Special Features Meaning of the index lights on the panel Index light Name Light Flash 1 (6) Temp setting In the state of temp setting - 1 (7) Refrigeration Refrigerating Ready to refrigerate, in the state ofcompressor start delay protection 1 (1) Heat Heating Ready to heat, in the state of compressorstart delay protection 1 (2) Defrost Defrosting Dripping or the state of compressor startdelay protection 1 (3) - - - 1 (4) Alarm - Alarm state Main Function Temperature display, temperature controlling(refrigeration/heat mode can be set),compressor start delay protection, 2 defrost modes (electric heat, hot gas), 2 defrost start mode (time alternation, accumulative compressor running time), 2 defrost end mode (timing, controlled by both temperature and time), dripping, manual defrost, sensor error alarm, one external alarm input, password, C/F unit change. Technique Index 1 Temperature display range: -50ï½?150â??(The resolution is 0.1â??) -58ï½?302â??(The resolution is 0.1â??) 2 Power supply: AC 220V±10% or AC 380V±10% 50Hz (Refer to the wiring diagram) 3 Operating environment: temperature -10â??ï½?50â??, humidityâ?¤85% 4 Relay contact capability: compressor 20A/250VAC, defrost 8A/250VAC (pure resistive load) 5 Temperature sensor: NTC R25=5kΩ, B (25/50) =3470K -
emperature display, temperature controlling(refrigeration/heat mode can be set),compressor start delay protection, 2 defrost modes (electric heat, hot gas), 2 defrost start mode (time alternation, accumulative compressor running time), 2 defrost end mode (timing, controlled by both temperature and time), dripping, manual defrost, sensor error alarm, one external alarm input, password, C/F unit change. Technique Index 1 Temperature display range: -50ï½?150â??(The resolution is 0.1â??) -58ï½?302â??(The resolution is 0.1â??) 2 Power supply: AC 220V±10% or AC 380V±10% 50Hz (Refer to the wiring diagram) 3 Operating environment: temperature -10â??ï½?50â??, humidityâ?¤85% 4 Relay contact capability: compressor 20A/250VAC, defrost 8A/250VAC (pure resistive load) 5 Temperature sensor: NTC R25=5kΩ, B (25/50) =3470K -
Fnad Electrical Appliance Plant, established is located in Ningbo, China. It is 2km away from Geely Automobile Industrial Park. It is a science and technology enterprise integrating with R&D, manufacture, trade and service. The Plant has focused on motor protection for more than years. It is specialized in applications of single-chip microcomputer technology in the fields of industrial control, power electronics and automobile electronics. Our main products include motor protectors, phase failure protectors, phase sequence protectors, volt-ammeters, surge protector, temperature controllers, etc. we have an in-depth study in prevention of occurrence of phase failure, phase sequence, overload, under-load, overvoltage, under-voltage, three-phase imbalance, over-current and similar abnormalities in customersâ?? equipments and provide such solutions as prevention, alarming and equipment protection. It supports major elevator plants, thermal power plants, automobile plants, crane factories, textile mills, refrigerating plants and chemical plants and provides solutions for them. Some products have passed CE certification and ROSH environmental certification of European Union. We endeavor to make the company to be listed in Hong Kong in 2020. Welcome to visit and communicate with us. -
1 RFT8100 wireless temperature and humidity detection system is composed by wireless temperature detection probes, humidity detection probes and display terminals. Adopting the advanced wireless temperature detection technology, RFT8100 transmits and displays the real time value detected from the local detection probes for the purpose of inspecting temperature and humidity on-site routinely. The alarm relay sends out signal when the temperature and humidity data exceeds or lowers the setting alarm value, and the alarm points can be found quickly by checking the alarm information. RFT8100 also provides curve diagram for checking temperature and humidity variation in short period for equipments management purpose. RFT8100 can achieve the remote monitoring function by transmitting the measured data to DCS monitor centre or equipments management centre thru RS-485 port or Ethernet port. 2 EMC and safety standard IEC61000-4-2 (GB/T17626.2) IEC61000-4-8 (GB/T17626.8) IEC61000-4-4 (GB/T17626.4) IEC61010-1 (GB/T4793.1). Exterior Size:91*91*72mm 0.5KGS.
Humidification (heating)/dehumidification (cooling) output Switching display of temperature and humidity High/low limit alarm Sensor calibration Sensor error detection and on/off output control Minimum on/off duration time
Temperature and Humidity Controller XM-18 Function: 1. Digital displaying of temperature, humidity 2. Full automatic temperature controlling 3. Full automatic humidity controlling 4. Full automatically turning 5. Full automatically alarming 6.Full automatically ventilator 7. Back emergency system Main Technical Index: 1. Temperature display range: 0 ~ 99.9â?? 2. Temperature measurement accuracy: �± 0.1â?? 3. Humidity display range: 0-99% RH 4. Humidity control accuracy: �± 3% RH 5. Output path: 7 Road ( over-temperature, temperature control, insufficient temperature, egg-left turning, egg right-turning, humidity control, alarm ) 6. The maximum output load current: temperature control, insufficient temperature less = 8A/AC 220V, over-temperature,egg-left turning, egg right-turning, humidity control, alarm less = 1A /AC 220V 7. Number of egg-turning : Maximum record 999 times. 8. Cycle of egg-turning: from 0 to 999 minutes (factory set at 90 minutes) 9. Turn the eggs time: 0 to 999 seconds (factory set at 180 seconds) 10. Ventilation cycle : 0-999 minutes (factory set at 120 minutes) 11. Ventilation time: 0-999 seconds (Factory set at 30 seconds) 12. The measuring line length: 1.5 meters Working conditions: 1. Power Supply: AC 160V ~ 240V, 50Hz or AC 110V ( choose the one you need ) 2. Relative humidity: less than 85% 3. Ambient temperature: -10 ~ 60â??Digital display of temperature, humidity Fully automatic temperature controlling Fully automatic humidity controlling Automatic turning
BJ-S series Intelligent temperature and humidity controller with completed FUZZY algorithm provides very precise of temperature and humidity monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature and humidity curve by automatically. Display unit can show environment humidity as per configure by user. The user also can adjust environment condition very easily. Accept customerized control logic modify details please contact our sales team. FEATURES Digital thermostat with 2 control port for fan & heater 3 digital or 4 digital LED screen for temperature and humidity value Sensor length max 10meter (default 3meter) Minimal size 48*48mm panel mounting, optional Din-rail mounting rack
B series temperature and humidity controller with completed FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature curve by automatically. And have an independent humidity input can monitor the environment RH and output control signal. User can adjust temperature value very easily to use dial and a LED indicator to show the relay. FEATURES Electromechanical thermostat, max with 2 control port for fan & heater Dial pad setting temperature / humidity threshold Sensor length max 10meter (default 3meter) 48*48mm panel mounting size, optional Din-rail mounting rack
Intelligent temperature & humidity controller with completed FUZZY algorithm provides very precise of temperature monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature/humidity curve by automatically. Display unit can show environment temperature and humidity as per configure by user. The user also can adjust environment condition very easily. Function & Feature ·DIN(48X48mm) Controller ·Indication and control accuracy 0.1, high measurement ·Heat/Cool control and PID control mode ·All settings except time maintained permanently in non-volatile memory until changed by user ·Built-in digital filter reduce interfere ·Self calibration technology, keep stabilization ·LED display show the data, prevent dazzle, highly visible display ·Simple 4-Button user interface ·Switching power supply and low consumption. ·Use large capacity relay
Pioneer in the technology of GSM sms alarm devices, legato possesses a team of expertise in engineering and programming of communication controllers. GSM sms alarm messenger has been a success worldwide during the past few years. It is widely installed in control and alarm systems for industrial monitoring, power plant, water supply network, geographical control and security. Temperature & humidity sms alert controller is dedicatedly developed for environmental monitoring and control. It sends sms alarm when temperature or humidity is higher/lower than user preset levels. More importantly, it provides the on/off control of equipments e.g. Air ventilation for maintenance in temperature/humidity range. Application is unlimited where temperature and humidity needs to be monitored on site and remotely.
Enerna IoTech Cellular 4G LTE IoT RTU Temperature Humidity Alarm Controller. It can Be controlled by SMS mode or 4G Data Network Mode. the 4G switch Controller support wide applications, such as access control system, Pump motor controlling, smart light fan switch, generation room monitor Control Enerna IoTech Cellular 4G LTE IoT RTU Temperature Humidity Alarm Controller Temperature & Humidity Control function: If the Temperature(humidity) is less than (more than ) the tempeareture (humidity ) you set, the device will switch on/off automatically as you Required. for example: If you need the device to work automatically when the device less than ( more than ) a certain temperature /humidity, you Can use this function. Skype: iotech(at)foxmail.com Whatsapp: 0086-137-2827-9456 Wechat: 13728279456 Web: Enerna-IoTech.com Enerna IoTech Cellular 4G LTE IoT RTU Temperature Humidity Alarm Controller Function: 1. Remote Control, no distance limitation 2. Dial Control first relay, SMS control 4 relays 3. 4G Data network Remote Control Via App 4. with 4 relay output (10A/30VDC, 10A/250VAC) 5. Support Temperature/Humidity Control 6. Scheduled/Timing Control 7. Industrial class design, Aluminum alloy material Packing List: 1* Enerna IoTech Cellular 4G LTE IoT RTU Temperature Humidity Alarm Controller 1* User Manual
Frequency range 1.000mhz 40.000mhz Frequency accuracy 1.0ppm/max Smd type. Size 50*32
Room thermostat.
Type: k, e, j, n, s , pt-100 Temperature range: -200 c to 1300 c Size can be customize
Product Name: JWV-Outside-Scale Industrial Glass Thermometer Model Number: JWV-C Supply Ability: 10,000 pcs/month V-shaped case (outside-scale). Straight form or 90íp angle form. Inductive temperature liquid Straight form 90ípangle form Organic (Y) JWV-11Y JWV-12Y mercury (G) JWV-11G JWV-12G Model The extent of survey The length of the upper part of the body(mm) The length of the lower part of the body(mm) 110 150 200 The scale div(C) JWV-11 JWV-12 -30-50C 2 1 30 40 50 63 75 80 100 120 150 200 300 400 500 -30-70C 2 1 0-60C 1 0.5,1 0-100C 2 1 0-120C 2 1,2 0-150C 2 2 0-160C 5 2 0-200C 5 2 0-300C 5 0-400C 5 0-500C 10 0-600C 10 Fixed external thread Six angle equilateral M27í-2 S32 3/4" S32 M20í-1.5" S27 1/2"BSP . NPT S27 3/8"BSP S27
Product Name: JWT-Hot Water Thermometers Model Number: JWT-11 / JWT-12 Supply Ability: 5,000 pcs/month Sheet iron submarine thermometer, Straight form (JWT-11). Sheet iron submarine thermometer, 90ípangle form (JWT-12). White polyester lacquer. Plain black dual scale. Triangular red reading liquid filled tube. Lower part: Fixed connected with thread, made in copper, length: 45mm - 80 mm. Connect pipe thread: 1/2". Dual scale extent of survey: -40C - 200C / -40ípF - 400ípF. Packing: 1 pc/paper box(depending on practical size) Conveyance: Packed in corrugated carton Size: 51 x 40 x 28cm
Product Name: JWV-Outside-Scale Industrial Glass Thermometer Model Number: JWV-B Supply Ability: 10,000 pcs/month V-shaped case (outside-scale). Straight form or 90íp angle form. Inductive temperature liquid Straight form 90ípangle form Organic (Y) JWV-11Y JWV-12Y mercury (G) JWV-11G JWV-12G Model The extent of survey The length of the upper part of the body(mm) The length of the lower part of the body(mm) 110 150 200 The scale div(C) JWV-11 JWV-12 -30-50C 2 1 30 40 50 63 75 80 100 120 150 200 300 400 500 -30-70C 2 1 0-60C 1 0.5,1 0-100C 2 1 0-120C 2 1,2 0-150C 2 2 0-160C 5 2 0-200C 5 2 0-300C 5 0-400C 5 0-500C 10 0-600C 10 Fixed external thread Six angle equilateral M27í-2 S32 3/4" S32 M20í-1.5" S27 1/2"BSP . NPT S27 3/8"BSP S27
Product Name: JWS-Hot Water Thermometers Model Number: JWS-11 / JWS-12 Supply Ability: 5,000 pcs/month Plastic shell submarine thermometer, straight form (JWS-11). Plastic shell submarine thermometer, 90íp angle form (JWS-12). White V-shaped aluminum scale panel. Gray thermoplastic resin shuck. Glass face (window) to exclude dirt and dust. Triangular red reading liquid filled tube. Lower part: Fixed connected with thread, made in copper, length: 43mm - 100 mm. Connect pipe thread: 3/4", 1/2". Dual scale extent of survey: -40C - 200C / -40ípF - 400ípF. Packing: 1 pc/paper box(depending on practical size) Conveyance: Packed in corrugated carton Size: 51 x 40 x 28cm
Product name: jwyc-plastic shell cartoon fish thermometer model number: jwyc Supply ability: 20, 000 pcs/month It is fit for children when they swab down.Clear temperature indication with red or blue organic liquid, which shows the best temperature of the bath water for children. Lovely fish type delights children when they bathe.
