TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.5 - 2.8 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 6.0 -9.0 ASTM D-445 3 Density @ 15 C Kg/m3 830-840 ASTM D-7042 4 Flash Point, ,COC, Min. C 140 ASTM D-92 5 Sulphur Content, Max. ppm wt.% 15 ASTM D-4294 6 Color- Max - 1.0 ASTM D-1500 7 Appearance - C & B Visual 8 Distillation Range, IBP, Min. C 250 ASTM D-86 9 Distillation Range, FBP, Min.C 380 ASTM D-86 Base oil SN50, the base stocks has become the most widely used base oil in Middle East and Asia. It is the workhouse ingredient for formulators and blenders of lubricants for assengers and commercial vehicles, as well as industrials applications. Applications: superior quality component for automotive and industrial applications. Safety & Handling: It is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers. The product is practically non-irritating to skin and eyes. Packing: Bulk, IBC Tank, Flexi Tank, New and Re-Conditioned Drums. Features and benefits: Consistency in formulation Market general packages with a range of additives Superior supply chain / delivery logistics
Cable Standard Generally conforms to EN-50525-2-21, DIN VDE 0282 part 810,IEC 245 Cable Features - Special heat resistant insulation - High current carrying capacity - Less heat energy radiation - Longer life - High compatibility of cores - Excellent resistant to moisture, abrasion, grace, oil - Excellent mechanical & electrical properties - Insulation is highly thermal stable - Harmonized acc. to European standards Technical Data Working Temp : -25�?�°C to 70�?�°C Operating Temp : -20�?�°C to max. +90�?�°C Nominal Voltage : 450/750 V Test Voltage : 2500V Min. Bending Radius : 6 x cable Diameter Flame propagation : Flame retardant test as per IEC 60332-1-2 Standard Packing Coils 100, 200,500 and 1000m Conductor Flexible bare Class 5 copper conductor according to DIN VDE 0295,IEC 60228 Insulation Rubber Type El-4 to VDE 0282 Part-1 Sheath Neoprene Jacket Rubber Type EM-2 Color White, Black, Blue or as per customer order Core Identification 1 Core - Black 2 Core - Blue & Brown 3 Core - Yellow/green, Blue, Brown 4 Core - Yellow/green, Blue, Brown, Black or Yellow/Green, Brown, Black, Grey 5 Core - Yellow/Green, Blue, Brown, Black and Grey Application H07RN-F rubber insulated and sheathed cables are intended for flexible connection to electrical equipment. They are suitable for both indoor and outdoor use in industrial and agricultural plant and on construction sites
FEATURES Excellent drying with Isocyanates Excellent clear surface High sealer quality APPLICATION PU sealers and ligh matt finish topcoats Matt PU coatings High sealer quality CHARACTERISTICS Solvent Xylene Solids 60 +/- 1% Hydroxyl value on solid 115 +/- 5 Oil length 33 +/- 1 Viscosity (Gardner scale @ 25o C Y - Z Acid value 14- 17 Color (Gardner) 3 max Clarity Clear SOLUBILITY DATA Aliphatic Solvents Limited Aromatic Solvents Soluble Ketones Soluble Esters Soluble COMPATIBILITY DATA Medium oil alkyd Compatible Long oil alkyd Compatible Rosin maleate Compatible DELIVERY FORM DETAILS Supplied at 60% in Xylene packed in Mild steel drums (Net. weight 200kg SHELF LIFE Minimum 12 months when stored under standard storage conditions
a. Name of product - M+D Nitrile Powder Free Gloves b. Price of product - Ranging from 6.70 EURO - 6.35 EURO depending on the amount of product ordered c. Product origin - Thailand d. Key Specifications/Special Features Protects against a wide range of chemicals. Superior strength with better puncture resistance. Biologically Compatible. Softness and shape provide excellent comfort. Beaded cuff enhances donning and prevents rollback. High tensile strength and elongation. Ambidextrous and straight fingers. Free from dirt marks, oil stains, embedded foreign particles, coagulum, etc. Completely free of talc. Non-Allergic. Polymer Coated for easy donning. Fully textured grip for great performance in all conditions. e. Harmonization System (HS) Code - N/A f. Minimum Order Size - 1 container = 33,000 boxes g. Packaging details - 100 pcs per Box - 10Boxes per Carton
a. Name of product - Bestsafe Nitrile Glove b. Price of product - Ranging from 6.70 EURO - 6.35 EURO depending on the amount of product ordered c. Product origin - Thailand d. Key Specifications/Special Features Protects against a wide range of chemicals. Superior strength with better puncture resistance. Biologically Compatible. Softness and shape provide excellent comfort. Beaded cuff enhances donning and prevents rollback. High tensile strength and elongation. Ambidextrous and straight fingers. Free from dirt marks, oil stains, embedded foreign particles, coagulum, etc. Completely free of talc. Non-Allergic. Polymer Coated for easy donning. Fully textured grip for great performance in all conditions. e. Harmonization System (HS) Code - N/A f. Minimum Order Size - 1,000,000 boxes / 1 year contract g. Packaging details - 100 pcs per Box - 10Boxes per Carton / Dimension Inner Box : W112 x L220 x H65mm / Dimension Out Box : W235 x L340 x H240mm
Product description This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings. Features & application Excellent optical, mechanical & environmental performance Csm dielectric type û fiber reinforced plastic High tensile strength High crush strength Aerial application Application in lan, wan, especially in ftth networks Easy to clamp and install Can bear ice loads and high wind pressures. Construction Parameters Fiber Count 02 to 12 Fiber Fiber Type G.652.D Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm Nominal Cable Delivery Length (km) 2 KM + 3% . Mechanical Characteristics Tensile Strength (N) 600 Tensile Strength (N) (Installation) 1000 Crush Strength (N) 2,000 Minimum Bending Radius (mm) 75 Temperature Operating Range -10 to +70¦C.
FEATURES Excellent Gloss & Gloss retention, excellent color / non yellowing characteristics High viscosity, medium Tg and high molecular weight / good drying and forms hard and moderately flexible film Excellent pigment wet ability and good resistance to detergents and soaps. APPLICATIONS As a decorative and quick drying paints. Industrial quality quick drying paints / as acrylic topcoat for textured paints. Road marking paints / for pavements / kerb stones / pathways. clear lacquers for PVC leather cloth / over lacquering and Metallizing / coatings for electronic equipment like TV / video and similar items. Scratch resistant protective coats and polycarbonate glazing. CHARACTERISTICS Type of Resin A composition of solution polymerization Solvent Xylene Solids 60 +/- 1% Viscosity(Gardner Tube @25o C) Z2 - Z4 Acid Value < 10 mg KOH Color (Gardner) Water white (0.1 max in Gardner) Clarity Clear COMPATIBILITY DATA Long Oil / Medium Oil / Styrenated Alkyd Incompatible polyols Limited Cellulose esters Good Chlorinated rubber Good Vinyl resin Good SOLUBILITY DATA Hydrocarbons Xylene / Toluene: Soluble Mineral Spirits Limited Alcohols Soluble Esters Soluble Ketones Limited Long Oil / Medium Oil / Styrenated Alkyd Incompatible DELIVERY FORM DETAILS (50% XYLENE) Packing: 190 Kgs / net: 200 Lit Mild Steel Drums SHELF LIFE Minimum 12 months when stored under ambient storage conditions.
ECO POWER PILL is a fuel conditioner pill for petrol,diesel and ethanol vehicle which is hydrocarbon compatible. It burns completely - no residue is left. It removes carbon deposits in natural way without risk of blocking the fuel system.ECO POWER PILL dissolves quickly in petrol, diesel and ethanol fuels, improving the whole combustion process. Improved combustion creates a cleaner burn in the engine and reduces emission of exhaust gases, enhancing air quality, particularly in areas with increased traffic. ECO POWER PILL accomplishes many tasks. Vehicle service costs are reduced with ECO POWER PILL -> No need to buy several different car-treatment products. Benefits of Eco Power Pill: a) reduce carbon emissions b) decreases fuel consumption and save fuel costs c) improves engine power and performance Add the fuel pill when you fill-up your tank. One pill will treat 40 litres. Pills can be broken in half to treat 20 litres. Therefore you can use pills for 20, 40, 60, etc. litres. Buses and trucks can use a whole bag dosage, which contains 10 pills and treats 400 litres. How to use Eco Power Pill: Step 1: Open the vehicle fuel flap and cap Step 2: Drop a pill into the fuel tank BEFORE refuelling Step 3: Start refuelling as the new fuel gushing down through the nozzle will dissolves the pill Step 4: Close back the fuel cap and flap after refuelling Please take note that the price quoted here is the MOQ price per bag (not per box and a box contain 20 bags) and the minimum order quantity is 5 boxes x 20 bags per box = 100 bags x usd$4.85 per bag. Kindly ask us for Eco Power Pill full catalogue 2021 / Export wholesale price list and they will be emailed to you within 24-48 hrs.
Certificate Of Analysis Name of the Product : Cinnamon Powder Batch Number : CIN/008-07/23 Date of Manufacturing : 04-07-2023 Date of Expiry : 03-07-2024 Part of the Plant Used : Bark Sterilization : ETO Treated Sr. No Test Parameters Standard Results Specifications 1. Physicochemical Tests Loss on Drying @105 C NMT 12.0% 7.74% FSSAI Total Ash NMT 7.0% 3.30% FSSAI Acid Insoluble Ash NMT 2.0% 0.94% FSSAI Volatile Oil Content NLT 0.5% 1.00% FSSAI 2.Heavy Metals Arsenic NMT 5.0 PPM Not Detected FSSAI Cadmium NMT 0.3 ppm Not Detected FSSAI Lead NMT 10 ppm Not Detected FSSAI Mercury NMT 1.0 ppm Not Detected FSSAI 3. Microbiological Total Plate Count NMT 1000 cfu/g 480 cfu/g FSSAI Yeast & Moulds NMT 100 cfu/g
Specifications: Sr. No Property Unit Specification 1 Appearance - Clear , Colourless 2 DEG Content Wt. % Min 99.8 3 MEG & TEG Content Wt % Max. 0.10 4 Specific Gravity @20/20 Deg C 1.1170 - 1.1190 5 Distillation Range @ 760 mm Hg IBP to DP Deg C 4 including 246 6 Water Wt. % max. 0.1 7 Acidity (as acetic acid) Wt.ppm max. 50 8 Chlorides (as CL) Wt.ppm max. 0.1 9 Colour Pt-Co Units max. 10 10 Iron (as Fe) Wt.ppm max. 0.1 11 Ash Wt.ppm max. 50
Detailed Product Description 1.Cisco IP Phone CP-9951 2.Cisco Sealed Box packing 3.2 years warranty 4.Competitive price and fast delivery gift pack
X2-10GB-SR, X2-10GB-LR, X2-10GB-LRM.
Gear oil is a liquid lubricant consumed in gears for decrease of resistance and wear of the gear tooth surfaces, elimination of the heat produced by the functioning gear and corrosion safety of the gear parts. The subsequent properties of gear oils are imperative for their process: Proper viscosity; Capacity to endure extreme pressures; Thermal and oxidation constancy; Deterioration and corrosion protection; Compatibility with seal products. Gear oils should offer consistent, proficient (low friction), low cost of repairing operation of gears at altered speeds, temperatures, oil contagions. Forms Of Gear Oils Amalgamations of additives impart special functions to gear oils: Rust and corrosion pre-emptive gear oils : Rust and corrosion pre-emptive oils are mostly mineral base. They comprise rust and corrosion inhibitors. The thickness of R&C oils in accordance to the ISO grading system is 32 to 320. Compounded gear oils : Compounded oils are inorganic base. They comprise rust and oxidation inhibitors, demulsifies and up to 10% of greasy oils for better lubricity. Compounded oils are used mostly in warm gears. The thickness of compounded oils in accordance to the ISO grading system is 460 to 1000. Extreme Pressure (EP) gear oils : EP oils may be either inorganic or artificial base. They comprise EP extracts, rust and corrosion inhibitors, anti-foaming proxies and demulsifies. The thickness of EP oils in accordance to the ISO grading system is 68 to 1500
Solvent C-9 CAS Number 64742-95-6 Formula C9H12 Aromatic hydrocarbons are a series of organic molecules that form flat ring-shaped bonds. Aromatic hydrocarbon C9 resins are conventionally named because it is defined by the number of carbon monomers in the chemical. C9 have a distinctive aromatic odour and a typical Gardner colour of 6- 10 (dark yellow to dark brown). It is insoluble in water, low alcohols and ketones, however are soluble in aliphatic hydrocarbons and chlorinated hydrocarbon solvents. SPECIFICATION Aromatic Content 99.56 %wt Benzene < 10 ppm wt Non-Aromatics 0.44 %wt Acidity No Free Acid Copper Strip Corrosion Pass 1A APHA Color 3 Initial Boiling Point 164.1C Dry Point 177.2C Specific Gravity @ 15.6/15.6C 0.8763C Density at 15C (in Vacuum) 0.8759g/mL Density at 15C (in Air) 0.8748g/mL Density at 30C (in Air) 0.8628g/mL Density at 30C (in Vacuum) 0.8639g/mL Appearance Colorless, Clear, Free of Foreign Matter Total Sulfur 0.1 ppm wt MAJOR USE: In adhesives, printing inks, sealants, polychoroprene rubber, concrete curing compounds, anti-drying agents and paints. It has a good compatibility with SBR, SIS, SEBS and SEPS and can be used as a pressure sensitive adhesive, hot-melt adhesive and synthetic rubber. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.
Control transformers are mostly used for industrial applications where electromagnetic devices are used such as solenoids, contactors and relays. Also control transformers can be utilized in industrial electrical applications for regulating voltages through electrical and electronic circuits. We make wide range of control transformers with E-I Lamination core and with various termination styles to suit for customer applications either single phase or Two phase or Three phase as per customer requirements . We provide termination with lead wires, terminal blocks, Din rails, solder points, screws, and terminal connectors. We can provide EI transformers up to 10kVA. We can provide with electrostatic shields, Thermal protector switches and circuit breakers. Features Insulation Class as per UL/IS (A,B,F,H) C and L clamps are provided according to specifications. High quality Terminal blocks are provided. High quality XLPE leads wires used. Low loss EI stampings used for high efficiency. High quality hardware used. Glass filled Nylon Bobbins used. Flame retardant insulation tapes used inside. High quality insulation used. Fiber glass sleeves used for external wires. Compact in space Cost effective Particularly well suited for resin cast Less in weight UL Approved Standards We follow IS11171. Compatible to IEC61558-1 We can provide UL 5085-1 and UL 5085-2 Applications Used in converters, inverters, instruments and power supplies. Used in many types of machines and accessories. Used in electronic sensing circuits. Used in voltage stabilizers. Used in power conditioning equipments. Used in Rectified Modules
Toroidal Transformers, by meeting today's requirements for smaller, more efficient, quieter and safer products, are being accepted in an increasing range of electronic and electrical equipment With toroidal transformer smaller dimensions, lighter weight and low stray magnetic fields , you can build more compact, lower cost quality products without sacrificing performance. Toroidal has a round shape with no air gaps, and with the primary and secondary windings uniformly distributed around the core, locks in\" the magnetic field and makes the toroidal transformer very quiet and efficient. Toroidal transformers are built around a ring-shaped core, which, depending on operating frequency, is made from a long strip of silicon steel or permalloy wound into a coil, powdered iron, or ferrite core. We make wide range of Toroids based on customer specifications. We provide center potted, plate mounted, clamp mounted and many other types of Toroids on customer specifications. Features High precision winding with Jovil and Ruff machines. High quality M4 27 CRGO core used Class H+ 200 Deg C Dual coat Enameled copper wires used UL approved Center potting provided for better cooling and fixing Tailor made according to customer specs TYCO, PANDUIT and MOLEX connectors and crimps used for UL approved models Custom made parts are designed and developed to meet specific requirements. Standards We follow Indian and UL standards. We can provide UL 5085-1 and 5085-2 We can make our product compatible with all international standards Applications Used medical and audio equipment Used in voltage stabilizers Used in electronics circuits Used in power supply units Used in variacs Used in high precision equipment
Cisco HUAWEI ZTE Compatible 1.25G 1550nm SM 120KM SFP Optical Transceiver with DDM Specification Data rate: 1.25G Wavelength: 1550nm Distance: 120KM Interface: LC Fiber: SM DDM: Yes Place of origin: Made in China Port:Shenzhen Working temperature: Commercial: 0°C to +70°C;Industrial:-40°C to +85°C Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment. Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle. Scope of application: switch, Ethernet, data center, SDH, SONET, ATM Package type: Individual package or 10pc/package 10G SFP+ optical transceiver ETU Model Cisco Model Product description ESP8592-3LCD03 SFP-10G-SR 10G SFP+ SR MM 850nm 300M LC connector with DDM ESP3192-3LCD02 SFP-10G-LRM 10G SFP+ LR MM 1310nm 220M LC connector with DDM ESP3192-3LCD10 SFP-10G-LR 10G SFP+ LR SM 1310nm 10KM LC connector with DDM ESP5592-3LCD40 SFP-10G-ER 10G SFP+ ER SM 1550nm 40KM LC connector with DDM ESP5592-3LCD80 SFP-10G-ZR 10G SFP+ ZR SM 1550nm 80KM LC connector with DDM SFP optical transceiver ETU Model Cisco Model Product description ES8512-3LCD05 GLC-SX-MM 1.25G SFP MM 850nm 550M LC connector with DDM ES3112-3LCD10 GLC-LH-SMD 1.25G SFP SM 1310nm 10KM LC connector with DDM ES3112-3LCD40 GLC-EX-SMD 1.25G SFP SM 1310nm 40KM LC connector with DDM ES5512-3LCD80 GLC-ZX-SMD 1.25G SFP SM 1550nm 80km LC connector with DDM ES3103-3LCD2 GLC-GE-100FX 155M SFP MM 1310nm 2KM LC connector with DDM ES-T1-RJ45 GLC-T 1000M Copper-T RJ45 100M
X2 10G Fiber-optic Transceiver X2-10GB-SR/LR X2 Fiber-optic Transceiver with Up to 10GB Data Rate 850nm/1310nm Wavelength(DFB laser) Reach to 85m/10km. (Digital Diagnostic Monitor compatible) C-Light transceivers family includes SFP SFP+ XFP X2 CWDM. All products are compatible with MSA. They are suitable for Fast Ethernet, Gigabit Ethernet, SDH/STM and Fiber Channel network system. Data rate ranges from 155M to 10G. Distance reach from 80m to 80km in MMF and SMF. These products can be compatibly used in brands devices of 3COM, Alcatel, Cisco, Extreme, Foundry, HP and Juniper.
Used cisco GLC-SX-MM with new logo on sales promotion. Nearly brand new Total: 25pcs Regular Price: $45-50 ea Price: $35 ea 100% tested; 90 days warranty available.
Product Type VoIP phone Main Features Multiple VoIP protocol support, integrated Ethernet switch VoIP Protocols SCCP, SIP Voice Codecs G.729a, G.729ab, G.711u, G.711a, iLBC Lines Supported Multiline Speakerphone Yes ( digital duplex ) Caller ID Yes Voice Mail Capability Yes Call Services Voice Mail, Caller ID, Call Transfer, Call Hold Display LCD display - monochrome - Yes Display Features Anti-glare Network Ports Qty 2 x Ethernet 10Base-T/100Base-TX Body Colour Charcoal Manufacturer Warranty 1 year warranty General Product Type VoIP phone Body Colour Charcoal Body Material ABS plastic Phone Features Call Services Voice Mail, Caller ID, Call Transfer, Call Hold Dialer Type Keypad Dialer Location Base Conference Call Capability Yes Speakerphone Yes ( digital duplex ) Menu Operation Yes Function Buttons Conference button, transfer button, hold button Volume Control Yes Ringer Control Yes Indicators Voice message waiting indicator Firmware Upgradable Yes IP Telephony Main Features Multiple VoIP protocol support, integrated Ethernet switch VoIP Protocols SCCP, SIP Voice Codecs G.729a, G.729ab, G.711u, G.711a, iLBC Lines Supported Multiline Quality of Service IEEE 802.1Q (VLAN), IEEE 802.1p Power Over Ethernet (PoE) Support Yes Network Protocols TFTP, Cisco Discovery Protocol (CDP) Network Ports Qty 2 x Ethernet 10Base-T/100Base-TX Voice Features Comfort noise generation (CNG), voice activity detection (VAD) Display Type LCD display - monochrome Display Location Base Display Resolution 396 x 81 pixels Backlit Yes Display Languages Danish, Hungarian, Czech, Croatian, Slovenian, Thai, Slovak, Brazilian Portuguese, English, German, French, Italian, Norwegian, Portuguese, Polish, Finnish, Swedish, Russian, Spanish, Dutch, Greek, Turkish, Bulgarian, Serbian, Romanian, Catalan, Japanese, Chinese, Korean Features Anti-glare Miscellaneous Connections Headset jack / RJ-9 Hearing Aid Compatible Yes Placing / Mounting Wall-mountable, table-top Compliant Standards VCCI Class B ITE, CISPR 22 Class B, CISPR 24, EN 60950, EN 61000-3-2, IEC 60950, EN 61000-3-3, EN55024, UL 60950, EN50082-1, EN55022 Class B, ICES-003 Class B, EN 61000-6-1, ACA TS001, AS/NZS 60950-1, CSA C22.2 No. 60950-00, ADA, FCC CFR47 Part 68, FCC CFR47 Part 15 B Dimensions & Weight (Base) Width 18.8 cm Depth 20.5 cm Height 16.4 cm Weight 1 kg Manufacturer Warranty Service & Support 1 year warranty Service & Support Details Limited warranty - 1 year Specification Manufacturer: Cisco 100% Genuine and Original Competitive Price Fast Delivery 1 Year Warranty Packaging & Shipping All original new items are with Cisco original New Sealed box and one more extra carton for well protected during delivery. Generally cargo will be shipped with FedEx, DHL, UPS, TNT, EMS etc, or as you like. If you have preferred forwarder, please kindly inform us in advance. Shipping costs will be calculated based on weight or volume weight according to actual situations. FAQ Payment: We accept TT Bank Transfer / Western Union /L/C. Warranty: All Items come with fully 12 months warranty. Shipping: All original new items are with Cisco original New Sealed box and one more extra carton for well protected during delivery. Generally cargo will be shipped with FedEx, DHL, UPS, TNT, EMS etc, or as you like. If you have preferred forwarder, please kindly inform us in advance. Shipping costs will be calculated based on weight or volume weight according to actual situations. Company Information We are Cisco Select Partner in Shanghai China, deal with original Cisco products (Cisco Switches, Routers, Security¡ê¬ Firewalls, Modules etc...) All products are Original New Cisco Brand! All Products are in good prices! Fast Delivery! If you have any interest, please feel free to contact me. We will be happy to give you details and the best prices. more are not listed here ,please contact us without hesitation!
