1) Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) Steel Grade: E75, G105, S135,X95 3) Type of end finish: EU-external upset, IEU-internal & external upset 4) All drill rod are made according to API 5D standard 5) We can provide in many conditions, with or without hard banding (Arnco100XT, Arnco300XT, tungsten
1) Drill pipe OD: 2 7/8", 3 1/2", 4", 4 1/2", 5" 5-1/2" 2) Steel Grade: E75, G105, S135,X95 3) Type of end finish: EU-external upset, IEU-internal & external upset 4) All drill rod are made according to API 5D standard 5) We can provide in many conditions, with or without hard banding (Arnco100XT, Arnco300XT, tungsten
Float shoes contain a backpressure valve that prevents fluids from entering the casing while the pipe is lowered into the hole and prevents cement from flowing back into the casing after placement, while enabling circulation down through the casing. Float collars are placed one to three joints above the guide shoe or float shoe. They provide a seat for the cement plugs, the bottom plug pumped ahead of the cement and the top plug behind the full volume of slurry. Once seated, the top plug shuts off fluid flow and prevents over-displacement of the cement. The space between the float shoe and the float collar provides a containment area to entrap the likely-contaminated fluids from the wiping action of the top cementing plug, securing the contaminated fluid away from the shoe where a strong cement bond is of primary importance. Float collars include a backpressure valve and serve basically the same function as the float shoe. Features: The Aluminum Alloys used in this product are PDC Drillable. Available in 5 1/2 to 20 sizes. Customized sizes are also available. Applications :In all applications ranging from close tolerance liners to full casing strings. Standard float shoe is provided with round cement nose to deflect offledges or obstructions. Customizable options including nose types, ports/jets, and ball deflector. Can be supplied either in Single Valve or in Double valve. Our Services For more information, you can contact me Looking forward to cooperating with you!
1. Main Technical Parameters: (1). Connection: 7 5/8 REG Pin. O.D. (mm): Ï?210. Length (mm): 290. (2). Connection: 6 5/8 REG Pin. O.D. (mm): Ï?190. Length (mm): 280. (3). Connection: NC 50 Pin. O.D. (mm): Ï?155. Length (mm): 270. (4). Connection: NC 46 Pin. O.D. (mm): Ï?150. Length (mm): 270. (5). Connection: NC 38 Pin. O.D. (mm): Ï?115. Length (mm): 260. (6). Connection: NC 31 Pin. O.D. (mm): Ï?100. Length (mm): 210. (7). Connection: 2 3/8 REG Pin. O.D. (mm): Ï?80. Length (mm): 190. (8). Connection: NC 26 Pin. O.D. (mm ): Ï?89. Length (mm): 200. (9). Connection: 3 1/2 REG Pin. O.D. (mm): Ï?100. Length (mm): 220. (10). Connection: 4 1/2 REG Pin. O.D. (mm): Ï?145. Length (mm): 260. (11). Connection: 2 7/8 EUE Pin. O.D. (mm): Ï?80. Length (mm): 220. (12). Connection: 7 5/8 REG Box. O.D. (mm): Ï?230. Length (mm): 290. (13). Connection: 6 5/8 REG Box. O.D. (mm): Ï?200. Length (mm): 280. (14). Connection: NC 50 Box. O.D. (mm): Ï?160. Length (mm): 260. (15). Connection: NC 46 Box. O.D. (mm): Ï?160. Length (mm): 260. (16). Connection: NC 38 Box. O.D. (mm): Ï?120. Length (mm): 270. (17). Connection: NC 31 Box. O.D. (mm): Ï?120. Length (mm): 270. (18). Connection: 2 3/8 REG Box. O.D. (mm): Ï?110. Length (mm): 200. (19). Connection: NC 26 Box. O.D. (mm): Ï?110. Length (mm): 200. (20). Connection: 3 1/2 REG Box. O.D. (mm): Ï?130. Length (mm): 270. (21). Connection: 4 1/2 REG Box. O.D. (mm): Ï?160. Length (mm): 260. (22). Connection: 2 7/8 EUE Box. O.D. (mm): Ï?80. Length (mm): 220. 2. Product Description: Lifting cap is one special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration, also called as lifting bail. We can provide the lifting cap or lifting bail in integral type or circular type. 3. Features: (1). API certified product with national best quality. (2). Forging type products used for lifting pipe collars, with regular thread connection. (3). Customized products available. (4). Warranty six months after sale. 4. Certification: API. 5. Condition: New. 6. Color: Required. 7. Model: Lifting cap. 8. Place of Origin: China (Mainland). 9. Price FOB in USD: 300~800/Piece(s). 10. Material: Carbon Steel. 11. Processing Type: Forging. 12. Machine Type: Drilling Tool. 13. Use: Well Drilling. 14. Processing Time: 30days. 15. Supply Ability: 10000 pieces/per month. 16. Payment Terms: T/T; L/C; Western Union. 17. Packing & Delivery: (1). Packing Details: Standard Export Package. (2). Port: China Main Port.
1. Main Technical Parameters: (1). Connection: 7 5/8" REG Pin. O.D. (mm): 210. Length (mm): 290. (2). Connection: 6 5/8" REG Pin. O.D. (mm): 190. Length (mm): 280. (3). Connection: NC 50 Pin. O.D. (mm): 155. Length (mm): 270. (4). Connection: NC 46 Pin. O.D. (mm): 150. Length (mm): 270. (5). Connection: NC 38 Pin. O.D. (mm): 115. Length (mm): 260. (6). Connection: NC 31 Pin. O.D. (mm): 100. Length (mm): 210. (7). Connection: 2 3/8" REG Pin. O.D. (mm): 80. Length (mm): 190. (8). Connection: NC 26 Pin. O.D. (mm): 89. Length (mm): 200. (9). Connection: 3 1/2" REG Pin. O.D. (mm): 100. Length (mm): 220. (10). Connection: 4 1/2" REG Pin. O.D. (mm): 145. Length (mm): 260. (11). Connection: 2 7/8" EUE Pin. O.D. (mm): 80. Length (mm): 220. (12). Connection: 7 5/8" REG Box. O.D. (mm): 230. Length (mm): 290. (13). Connection: 6 5/8" REG Box. O.D. (mm): 200. Length (mm): 280. (14). Connection: NC 50 Box. O.D. (mm): 160. Length (mm): 260. (15). Connection: NC 46 Box. O.D. (mm): 160. Length (mm): 260. (16). Connection: NC 38 Box. O.D. (mm): 120. Length (mm): 270. (17). Connection: NC 31 Box. O.D. (mm): 120. Length (mm): 270. (18). Connection: 2 3/8" REG Box. O.D. (mm): 110. Length (mm): 200. (19). Connection: NC 26 Box. O.D. (mm): 110. Length (mm): 200. (20). Connection: 3 1/2" REG Box. O.D. (mm): 130. Length (mm): 270. (21). Connection: 4 1/2" REG Box. O.D. (mm): 160. Length (mm): 260. (22). Connection: 2 7/8" EUE Box. O.D. (mm): 80. Length (mm): 220. 2. Product Description: Lifting cap is one special tool for lifting of drilling tools in petroleum, natural gas, drilling engineering and geographical exploration, also called as lifting bail. We can provide the lifting cap or lifting bail in integral type or circular type. 3. Features: (1). API certified product with national best quality. (2). Forging type products used for lifting pipe collars, with regular thread connection. (3). Customized products available. (4). Warranty six months after sale. 4. Certification: API. 5. Condition: New. 6. Color: Required. 7. Model: Lifting cap. 8. Place of Origin: China (Mainland). 9. Material: Carbon Steel. 10. Processing Type: Forging. 11. Machine Type: Drilling Tool. 12. Use: Well Drilling. 13. Processing Time: 30 days. 14. Supply Ability: 10000 pieces/per month. 15. Payment Terms: T/T; L/C; Western Union. 16. Packing & Delivery: (1). Packing Details: Standard Export Package. (2). Port: China Main Port.
Material: E75/X95/G105/S135 OD: 2 3/8" to 6 5/8" Wall Thickness: 6.45mm to 12.7mm Length: R1(6.10-7.01meters) R2(8.84-9.75meters) R3(12.19-13.72meters) Hard band: Arnco100XT, Arnco200XT and Arnco300XT; Botn1000, Botn3000, TCS8000, TCS-Titanium, Armacor M etc. Also we can make according to customers' requirements. Standard: API 5DP RSC Type: NC26 NC31 NC38 NC40 NC46 NC50 NC55 6-5/8FH UPSET: EU(External upset) IU(Internal upset) IEU(Internal & External upset) Technical: Hot Rolled Surface treatment: blank oil painting Packing: 6/9/12 pieces in a bundle packed with steel holder Third party inspection: BV_SGS_ISO Usage: oil gas industry, well drill industry
Drill pipe is used in the drilling. Its a major drilling component which connects rotary system, hoisting system, circulation system with drill collar and bit. Through it the rotary table drives the bit rotation, hook drives bit up and down and drill fluid flows to the well bottom forming circle to make the bit breaks rock and reaches continuous drilling. 1) Certificate: API 5DP, API Q1, ISO 9001, ISO 29001 2) Size Range: 60.32-168.28mm 3) OD: 2 3/8, 2 7/8, 3 1/2, 4, 4 1/2, 5, 5 1/2, 6 5/8 4) Grade: G105, S135, X95, E75 5) Wall Thickness: (0.25-0.50) inch or (6.45-12.70) mm 6) Length: R1: 6.10-7.01m; R2: 8.84-9.75m; R3: 12.19-13.72m 7) Upset style: IU, EU, IEU
Sl-swivel with spinner Xsl-swivel with spinner is a combination of swivel and kelly spinner, driven by air motor or hydraulic motor, with keyless connection adopted between spinner and central pipe of swivel.It is designed and manufactured according to api spec 8c "specification for drilling and production hoisting equipment" Skype: julia0402zcy Water swivel for drilling 1.Ma.Static load:4500kn 2.Max.Rotary speed:500r/min 3.Max.Wp:35mpa 4.Id of center pipe:75mm Water swivel for drilling The swivel includes two main categories, which are common swivel and double duty swivel. Double duty swivel is a common swivel combined with a spinner. Common swivel consists of swivel bail, shell, support, gooseneck, central pipe, master bearing, joint and other parts. The lower end is connected with kelly stem by reg thread. The swivel bail is hung on the hook. Gooseneck and rotary hose can be connected by reg thread connection or union connection. Washpipe packing set assembly adopts cassette structure, so it can be quickly replaced without disassembling rotary hose and gooseneck. 3lp and 4lp internal or external thread hose connection thread are available for you. We can also manufacture low temperature resistant swivel according to customer's requirements. Our swivel meets api spec 8cpsl1 standards. It has been awarded the api certification issued by the american petroleum institute and is allowed to use api monogram.
Steel tooth bits series: Soft formation tooth bits: The soft formations tooth bits are used to drill low compressive strength, soft formations. Long projection tooth lengths are used on high offset cones to provide the greatest penetrations rates possible. Wear resistance hard facing is used to control tooth wear. On the softest bit types this hard facing completely covers the bit teeth. Medium hard formations tooth bits: The medium hard formation tooth bits are used to drill high compressive strength, medium hard formations. Shoot projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
Tricone Bit, Steel Tooth Bit, TCI tricone Bit, Single Cone Bit, Rock drill Bits,Rotary Bits. Application Petroleum & Gas ,Water well ,Mining and Tectonic Industries ,Oil field, Construction, Geothermal, Directional Boring, and Underground Foundation work. 1) Condition: 100% new 2) Manufacturer brand name: GREAT 3) The bit size: 2 7/8" - 36" 4) IADC code: 111,115,117,127,137,217,417,517,537,617,637 etc. 5) Seal type: Rubber Sealed Bearing ,Metal Sealed Bearing. 6) Bearing type: Sealed Journal bearing ,Roller Bearing ,Air Bearing. 7) Nozzle quantity and nozzle size: 3 nozzles. 8) Connection joint Pin size: API 2-3/8"-7 5/8" Reg.
Tricone Bit, Steel Tooth Bit, TCI tricone Bit, Single Cone Bit, Rock drill Bits,Rotary Bits. Application Petroleum & Gas ,Water well ,Mining and Tectonic Industries ,Oil field, Construction, Geothermal, Directional Boring, and Underground Foundation work. 1) Condition: 100% new 2) Manufacturer brand name: GREAT 3) The bit size: 2 7/8" - 36" 4) IADC code: 111,115,117,127,137,217,417,517,537,617,637 etc. 5) Seal type: Rubber Sealed Bearing ,Metal Sealed Bearing. 6) Bearing type: Sealed Journal bearing ,Roller Bearing ,Air Bearing. 7) Nozzle quantity and nozzle size: 3 nozzles. 8) Connection joint Pin size: API 2-3/8"-7 5/8" Reg.
Our company can supply you the mud pump spare parts for you. All our spare parts are manufactured according API specification.and it is made for F series and 3NB series mud pump. Up to the parts you want.
1.China direct supplier 2. Api certificate 3.Od from 2-3/8'' t0 5-1/2'' 4.End upset: eu, iu, ieu 5.Connection type: nc, if, fh 6. Grade:e75, x95, g105, s135 7.Quantity assured 8.Best service 9. High quality 10 reasonable price Packaging detail: Standard export bundle wrapped with strong steel strip or as customer's requirement Delivery detail: 20-35 days after receiving the copy of l/c or prepayment
Dimension range(OD inch) 4-1/2â?�~20â?� (114.3mm-508mm) Wall Thickness As per API 5CT standard (the latest edition) Length R1,R2,R3 Steel Grade H40, J55, K55,C75,N80, L80,C90,T95, P110 ,Q125 Pipe Type Seamless (SMLS),Electric Resistance Welded (ERW) Threads or Connection BTC, STC, LTC, Left hand connection or other premium thread like :VAM Surface Treatment Anti-corrosion Water Based Paint TPI SGS, BV, MOODY, CCIC can be arranged before shipment. Packing Protection caps on both ends and in bundles with steel strips and two tags as per export requirements Application Used as the architectural retainer for the walls of oil, gas wells
Dimension range(OD inch) 4-1/2~20 (114.3mm-508mm) Wall Thickness As per API 5CT standard (the latest edition) Length R1,R2,R3 Steel Grade H40, J55, K55,C75,N80, L80,C90,T95, P110 ,Q125 Pipe Type Seamless (SMLS),Electric Resistance Welded (ERW) Threads or Connection BTC, STC, LTC, Left hand connection or other premium thread like :VAM Surface Treatment Anti-corrosion Water Based Paint TPI SGS, BV, MOODY, CCIC can be arranged before shipment. Packing Protection caps on both ends and in bundles with steel strips and two tags as per export requirements Application Used as the architectural retainer for the walls of oil, gas wells
29 1/2"-500psi annular bop bore: 29 1/2" working pressure: 500psi top connection: 29 1/2", asme b16.47, 1000 psi wp studded, ring groove r-95 bottom connection: 29 1/2", asme b16.47, 1000 psi wp, flanged, ring groove r-95 weight£¨kg£©£º10973 dimension£¨mm£©£º2070¡á2070¡á1749
Single ram bop (1)api spec 16a (2)nace mr-01-75 (3)h2s (4)api q1&iso 9001 Api 16a bop stacks features: 1) standard:api16a 2) bore size:7 1/16-21 1/4" 3) pressure:2000-15000psi 4) type: shaffer type, cameron type 5) body styles: single, double, triple 6) outlets: according to customer needs or standard. 7) end type: api flanged, studded and other types are available Annular bop 1) standard:api16a 2) bore size:7 1/16-21 1/4" 3) pressure:2000-15000psi 4) type: shaffer type, hydril type 5) best price Packaging detail:steel/ wooden case or according to clients' requirement Delivery detail:20-45 days after receiving the copy of l/c or prepayment
API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality Product Description 1. Strictly according to API 5DP standard 2. Yield strength: Min 517 Mpa 3. Tensile strength: Min 724 Mpa 4. Pipe body material: High quality alloy seamless pipe of E75 5. Thread treatment: Phosphorization or copper plating 6. The material is seamless steel pipe from China most famous enterprise Baosteel and Tianjin seamless steel. Drill pipe quality control: 1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China. 2.Checked by our QC staff and factory own laboratory. 3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing. 4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others. Drill pipe usage notes: 1.New drill pipe should be pasted thread oil before connection 2.Make up and break at least 3 times before drilling 3.Hard bending and plastic coating can be processed according to costumer special requirement. Name:water well drill pipe OD:2.375-140mm Thickness:0.27-11.4mm Steel Grade:E75 , X95, G105, S135 Type od end finish:EU-external upset, IEU-internal & external upset Standard:API 5DP payment:L/C,TT Package:bare bundle or as request Delivery:10-20days after receiving the deposit Port:xingang, tianjin Market:Mid east, North/South America,Europe,Asia,Africa etc.
API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality Product Description 1. Strictly according to API 5DP standard 2. Yield strength: Min 517 Mpa 3. Tensile strength: Min 724 Mpa 4. Pipe body material: High quality alloy seamless pipe of E75 5. Thread treatment: Phosphorization or copper plating 6. The material is seamless steel pipe from China most famous enterprise Baosteel and Tianjin seamless steel. Drill pipe quality control: 1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China. 2.Checked by our QC staff and factory own laboratory. 3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing. 4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others. Drill pipe usage notes: 1.New drill pipe should be pasted thread oil before connection 2.Make up and break at least 3 times before drilling 3.Hard bending and plastic coating can be processed according to costumer special requirement. Name:,water well drill pipe OD:,2.375-140mm Thickness:,0.27-11.4mm Steel Grade:,E75 , X95, G105, S135 Type od end finish:,EU-external upset, IEU-internal & external upset Standard:,API 5DP payment:,L/C,TT Package:,bare bundle or as request Delivery:,10-20days after receiving the deposit Port:,xingang, tianjin Market:,Mid east, North/South America,Europe,Asia,Africa etc.
Brief Introduce: Certificate: API 5DP, API Q1, ISO 9001, ISO 29001 Size Range: 60.32-168.28mm OD: 2 3/8â?�, 2 7/8â?�, 3 1/2â?�, 4â?�, 4 1/2â?�, 5â?�, 5 1/2â?�, 6 5/8â?� Grade: G105, S135, X95, E75 Wall Thickness: (0.25-0.50) inch or (6.45-12.70) mm Length: R1: 6.10-7.01m; R2: 8.84-9.75m; R3: 12.19-13.72m Upset style: IU, EU, IEU Products Features: High quality raw material and advanced heat treatment make the products higher hardness and toughness. Especially it has higher low temperature toughness. Smoother and longer upset taper length and high performance pipe extends the drill pipes service life. Meet or exceed API SPEC 5DP, API SPEC 7-2, and API RP 7G requirement. dopt complete advanced testing method and strict quality control to ensure the high quality and stable performance products. Holding advanced technology, high end product R&D capabilities and senior technical workers, we can provide customers special requirement products.
