300Tv Sp Vertical Slurry Pump Suppliers and Manufacturers

Shijiazhuang Naipu Pump Co., Ltd is a professional slurry pump manufacturer in China. We engage in heavy duty and severe duty material handling solutions. Our slurry pumps are manufactured to be the best standards, ensuring longer service life, higher performance, ease of operation and maintenance. The pumps are widely used in mining, construction, metallurgy, power plant, sewage water treatment, dredging, and chemical and petroleum industries. Our company is Direct factory of slurry pump, gravel sand pump , dredging pump and Spare parts,which are widely used in mine, metallurgy, coal, electric power ,dredge and other sectors of the national economy. �  Our� pumps are exported� to more than� 20 countries and regions,such as South America, Africa, Southeast Asia, Russia and so on.Our products have won unanimous favorable comments from the market. Application: The type of slurry pumps are using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. For example: Coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station. Contact Us Speed: Contact us or leave messages today, we will immediately reply to your inquiries within 18 hours. Type Allowable Mating Max. Power(Kw) Clear Water Performance Impeller Capacity/Q m/hr Head/m Speed/rpm Max Efficiency/% NPSH/m Nos of Vane Impeller Diameter/mm 1.5X1-NP-NAH 15 12.6--28.8 6--68 1200--3800 40 2--4 5 152 2X1.5-NP-NAH 15 32.4--72 6--58 1200--3200 45 3.5--8 5 184 3X2-NP-NAH 30 39.6--86.4 12--64 1300--2700 55 4--6 5 214 4X3-NP-NAH 30 86.4--198 9--52 1000--2200 71 4--6 5 245 6X4-NP-NAH 60 162--360 12--56 800--1550 65 5--8 5 365 8X6-NP-NAH 300 360--828 10--61 500--1140 72 2--9 5 510 10X8-NP-NAH560 612--1368 11--61 400--850 71 4--10 5 686 12X10-NP-NAH 560 936--1980 7--68 300--800 82 6 5 762 14X12-NP-NAH 560 1260--2772 13--63 300--600 77 3--10 5 965 16X14-NP-NAH 1200 1368--3060 11--63 250--550 79 4--10 5 1067 20X18-NP-NAH 1200 2520--5400 13--57 200--400 85 5--10 5 1370

Tobee TH Slurry Pump Size: 1" to 22" Capacity: 3.6-5400 m3/h Head: 6-125 m Handing solids: 0-130mm Concentration: 0%-70% Materials: Hyper chrome alloy, Rubber, Polyurethane, Ceramic, Stainless steel etc.

Outlet: 4-16 inch Capacity: to 4320 m3/h Head: to 80 m Type: centrifugal, horizontal, single casing Wet parts materials:high chromium abrasion resistance alloys Replacement: interchangeable with other pumps dimensionally Packaging detail: Wooden package Delivery detail: 7-30 days

NS(G) series Sand(Gravel) pumps are designed for continuously handling the most difficult higher abrasive slurries, which contain too big solids to be pumped by common pumps. NS(G) series Sand(Gravel) pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging in dredger and course of rivers, and other fields.

NHM Series slurry pump is cantilevered heavy duty metal lined slurry pump,It is designed for handing strong abrasive, high density or low density, high head slurries. Clients from home and abroad are speak highly of its excellent performance, NHM series slurry pumps have become the first selection in metallurgical, mining, coal, power, building material and other industrial departments etc.

FEATURES LOWER SP10116L-G01 Spare Parts is installed on 100RV-SP Vertical slurry pump. 100RV-SP Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles. Design Features: Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones. The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing. Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered. Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR. Impeller - Double suction impellers (top and bottom entry) induce low axial bearing loads and have heavy deep vanes for maximum wear resistance and for handling large solids. Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable. The impeller is adjusted axially within the casting during assembly by external shims under the bearing housing feet. No further adjustment is necessary. Upper Strainer - Drop-in metal mesh, snap-on elastomer or polyurethane for SP and SPR pumps. Strainers fit in column openings. Lower Strainer - Bolted metal or polyurethane for SP, moulded snap-on elastomer for SPR. Discharge Pipe - Metal for SP, elastomer covered for SPR. All wetted metal parts are completely rust protected. Submerged Bearings - None Agitation - An external agitator spray connection arrangement can be fitted to the pump as an option. Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye. Materials - Pumps can be manufactured in abrasive and corrosive resistant materials.

Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials designed by High abrasion and corrosion resistance alloy, rubber or polyurethane etc, Expecially for handling high abrasive, high density slurries. Design Features Bearing assembly - a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. Volute Liners - easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer. Elastomer seal rings back all liner joints. Pump casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Impeller front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.

Metslurry is a professional company supplying slurry pumps and spares, and also focus on making a world-level supply chain to the mining world, we provide interchangeable pumps, the quality is the same as warman. The models are ah(r), sp(r), l(r), m(r), g series and so on. We have very professional team to select the correct slurry pumps and give after-sales services. Our goal is to be your spare parts warehouse and workshop. We already have built 3 warehouses and workshops in china, australia and laos, so most common parts are in stock in above area, it is fully guaranteed for delivery time if you have any enquiry or urgent need.

Feature of the product: use of double casing , it has the character of high efficiency , wear-resistant, Stable performance and ecxellent changeable parts , the material of liner and impeller is adopt of wear-resistant metal or rubber , the discharge port can be positioned ar 8 differernt positions at an intervals of 45°. The pumps may be installed in multistage series , may be driven by belt or direct Connection, the seal of shaft may be adoptable of gland seal , expeller seal or mechanical seal, the direction of rotation from the drive end is clickwise Application: the pumps are suitable for deliverling abrasive , high density slurries in the metallurgical , mining, coal and power industrial departments , for example raw ore , middings , concentrates , gangues etc.

ZJ slurry pump is a new generation anti-wear, energy saving slurry pump.The ZJ series pumps used international advanced solid-liquid two-phase flow theory and were designed using the minimum-wear principle.The flow parts of these pumps are suitable for the flow of state media for it's set shape, which reduces hydraulic loss of eddy and impact, both in pump and along the pipelines; so reduced friction of flow parts, lower noise and vibration of the pump translates into improved hydraulic efficiency. Product name: ZJ slurry pump Item:advanced slurry pump than AH slurry pump Features: ---Cetnrifugal cantiliver type, easily repair bearing house ---Can transport high density slurry containing highly hard abrasive particles like concrete, coal cinder, cement, clay, grit ,juice etc ---The slurry density can be up to 60% Data sheet : ---Capacity: up to 19*20m3/h ---Head:up to 94m ---Material: High chrome alloy and rubber lined Function Introduction: ---Mining, metallurgy, coals, electricity, construction material industry etc

Type ZJ and ZJLR pumps are vertical,centrifugal slurry pumps submerged in sumps to work.They are designed for delivering abrasive,large particle and high slurries.These pumps have no need of any shaft seal and sealing water.they can also be operated normally for insufficiend suction duties. Wet parts of Type ZJL pump are made of abrasion-resistant metal. All parts of type ZJLR pump immersed in liquid are lined with rubber our liners.They are suited to transport non-edge angle abrasive slurry. Different size wooden case

This pump is design in vertical type seal less Glandless pump with m

LAH SERIES SLURRY PUMP Centrifugal Slurry pump centrifugal Heavy Duty Slurry Pump Type LAH pumps are cantilevered,horizontal,centrifugal slurry pumps.They are designed for handling abrasive,high density slurries in the metallurgical,mining,coal,power plant,building material and other industrial departments. The pumps of this type also can be installed in multistage series. The series of the pumps are of double casing.The liners are made from high chrome alloy as well as rubber and elastomer. The shaft seals forms of the series of the pumps can be adoptable of gland seal,centrifugal seal and mechanical seal.The discharge pipes can be positioned at intervals of 45 degree by request and oriented to any eight position to suit installation and applications. The capacity of the HEAVY DUTY SLURRY PUMP can reach 3600m3/h, the head of the pump can reach 80 m. The discharge pipe can reach 16 inches. The main product slurry pump is of 20 series, 80 varieties and more than 400 specifications, such as slurry pump, tailing slurry pump, sand gravel pump and dredge pump all can we product. For more information on pumps, please click here.

Slurry pump is a kind of centrifugal pump to transport slurry materials under the centrifugal force. It transfer the electricity energy into kinetic and position energy. It is widely applied in mine, electricity, metallurgy, coal and environmental protection for abrasive solid containing slurry transportation. It can also be used to transport some corrosive slurry with crystals.

Product Description Introduction: Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization. Structure: Single stage, single suction, overhang shaft, centrifugal, double-casing horizontal pump, Wet ends are made of abrasive resistant hard metal or rubber. Base- High strengthened base is connected with Frame Plate by bolts; The Adjusting Bolt under the Bearing Assembly realize easy adjustment to impeller clearance. Bearing Assembly: -High rigidity shaft to handle heavy duty work condition; -Cartridge bearing assembly jointed with base by bolts; -Grease Lube bearings fitted in sealed bearing housing, the two labyrinth on both ends prevent the grease from contamination. Shaft Sleeve - Clearance fit between solid solution treated stainless steel shaft sleeve and shaft as well as the O-rings on both ends prevent the shaft from abrasion and erosion. Casing - Made of Gray Iron or Ductile Iron, Ribs help casing to stand high pressure. Impeller - Pump out vanes on both shrouds reduces recirculation and seal pressure. Wet Ends - Impellers, liners, volutes made of High-Chrome alloy or rubber, both materials are interchangeable. Slurry Pump Spares Pumps spare and parts material : High chrome alloy:A33, A05, A07, A49, etc. Industrial slurry pump, corrosion resisting slurry pumps Natural rubber: R08, R26, R33, R55, etc. Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, and so on. Applications Mining Coal washery Power plant Metallurgy Petrochemical Building material Dredging Other industrial departments, etc. This series of pumps are preferred by many customers with special installation requirements and widely applied in pool. Its wear-resistant metal liner could handle abrasive slurries with rough particles and high concentration.

Www.Hanhe-pump.Com Hanhe group co., limited Professional slurry pump dredging pump manufacturer and exporter china. Our slurry pump are dimensionally interchangeable with warman® slurry pump. Ah, hh, l, m slurry pump, g gravel pump and wn dredging pump. Warman ah, warman hh, warman l, warman m

Wzj model for the single-stage, single-suction, cantilevered horizontal centrifugal slurry pump, this series pump adopt international advanced solid-liquid two-phase flow theory, according to the principle of minimum loss design. The over-current components geometry conforms to the flow of the medium, to reduce the eddy current and impact, so as to reduce the flow components of wear, improved the hydraulic efficiency, reduce the running noise and vibration;

Slurry pumps Our xh model=ah model 1) about us: ¡¡1. We are over 10 years leading professional slurry pump manufacturer in china. ¡¡2. Top quality of raw material castings. ¡¡3. Advanced equipment with mature experiences engineers. ¡¡4. Large size factory with strictly quality control system. 2) slurry pump parameter: Wooden box

Main parameter: Capacity(flow rate): 86.4-198 m3/h Head: 9-52 meter Rate speed: 1000-2200 r/min Impeller diameter: 245 mm 1. Application: Mh series of slurry pump is a kind of cantilever centrifugal slurry pump, widely applied for pumping high abrasive and erosive slurry in thermal power generation, chemical, mining, coal mining, metallurgy, environmental protection. 2. Sealing type of slurry pump: Shaft sealing use packing seal, associated-impeller seal and mechanical seal, can be applied for different work condition requirements. 3. Structure of slurry pump: Use double shell structure, the pump body, pump cover be lined with replaceable wear-resistant metal liner or rubber liner. The pump press out opening can be rotary mounting according to eight angle to meet different installation requirements. Meanings of the model: mh75c M---------wear-resistant high chromium alloy H---------heavy type slurry pump 75------- the pump press out opening is 75 mm C -------bracket style Wooden box