Warman Slurry Pump And Parts

Designed to be interchangeable with a Warman AH 6/4 Slurry Pump. FH Series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo.

Www.Hanhe-pump.Com China hanhe is a professional slurry pump, gravel pump and dredging pump manufacturer in china. Pumps are dimensional interchangeable with warman pump. 1.5/1b-ah, 3/2c-ah, 4/3c-ah, 10/8st-ah

Designed to be interchangeable with a warman ah 4/3 slurry pump. Fh series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. Structure: The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance. Application: This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime. Standard export wooden cargo

Supplier: Slurry pump, warman slurry pump parts

Slurry pump Battlemountain heavy duty slurry pumps are designed for long life, efficient operation, and ease of maintenance resulting in a lower total cost of operation. Model WX,WXR,WM,WL,WG,VC,VCR......

Slurry pumps The pump is single, single suciton, frame mounted, overhung, double casing design horizontal centrifugal pump.They are designed for severe slurry pumping: Capacities through 9000 GPM (2000 M3/HR) Heads to 350 feet (100m and 950 BHP) Temperatures to 240 degree(165 degree)

Cantilever pumps

Horizontal Slurry Pumps, Metal Lined Slurry Pumps, Heavy Duty Slurry Pumps Model: SH/100D, SH/150E, SH/200F Series: Metal Lined Slurry Pumps General Introduction: Our horizontal slurry pumps are designed for heavy-duty applications such as mining, minerals processing, mill discharge, power plants, tailings, and other industrial applications, for maximum abrasion, erosion, and corrosion resistance. The pumps are in a wide range of sizes, available with both high chrome and ruber wearing parts. Components like impeller and volute come in a range of hard metal types and elastomer to suit the specific application. Different shaft seal types are available to suit every requirement, including gland packing seal, expeller seal and mechanical seal. Our metal lined slurry pumps are designed for heavy duty industrial applications, to handle the most arduous slurries.  Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures. Applications: Heavy-duty slurry pumping applications, Mining and minerals processing, Mine refuse and tailings, Mill discharge, Cyclone feed, Sand and aggregates Driven Type: DC(z): The pump and the engine is directly connected by a coupling. Belt-driven Types: The pump and the engine is connected by pulleys and belts --- CV, CR(z), ZV(z).

Product name THM-3C slurry pump Type THM pump size 4/3 Capacity 86.4-198m3/h Head 9-52m Allowable Max. Power 30kw Speed 1000-2200r/min NPSH 4-6m Introduction Model Explanation and Performance Chart: THM-3C T: Tower pump H: High Concentration M: Metal lined 3: Discharge size (inch) C: Frame type with maximum power Introduction of Slurry Pump ---- THM Series THM Series slurry pump is mainly used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The features of this kind of slurry pump The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for THM pump are adoptable of hard metal only. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency are main character of these kinds of slurry pump. The pump of this type may be installed in multistage series to meet the delivery for long distance. Main application of this kind of slurry pump This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. Pump Model THM Series Impeller Dia. Allowable Max.Power Clear Water Performance Capacity Q Head H(m) Speed n(r/min) Max.Eff. ¦Ç% NPSH (m) m3/h l/s THM-1B 15 12.6-28.8 3.5-8 6-68 1200-3800 40 2-4 152 THM-1.5B 15 32.4-72 9-20 6-58 1200-3200 45 3.5-8 184 THM-2C 30 39.6-86.4 11-24 12-64 1300-2700 55 4-6 214 THM-3C 30 86.4-198 24-55 9-52 1000-2200 71 4-6 245 THM-3D 60 THM-4D 60 162-360 45-100 12-56 800-1550 65 5-8 365 THM-4E 120 THM-6E 120 360-828 100-230 10-61 500-1140 72 2-9 510 THM-6R 300 THM-8ST 560 612-1368 170-380 11-61 400-850 71 4-10 686 THM-10ST 560 936-1980 260-550 7-68 300-800 82 6 762 THM-12ST 560 1260-2772 350-770 13-63 300-600 77 3-10 965 THM-14ST 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067 exported wooden crate