Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,Website:http://www.xinchengcanmaking.com, and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Single-head Automatic Seal Ring Making MachineApplication: The equipment is applied to make the seal rings of 18L / 20L chemical cans,Website:http://www.xinchengcanmaking.com, and paint buckets.This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.We adopt the EVA foaming technology, using EVA foaming strips instead of the traditional rubber strips. The cost of the traditional rubber strips is high, which needs 0.5-0.8 RMB per cap. However, EVA foaming strips are much cheaper, only need 0.06-0.07 RMB per cap. The EVA foaming strips are not only cheap, they also have better sealing effect. At the same time, they have the advantages of acid and alkali resistance and corrosion resistance. Parameters:Single-head  Automatic Seal Ring Making MachineWeight0.4TVoltageThree-phrase  380VSize mmlength*width*height1050*1050*1400Pressure4-6MPaProduction  Capacity16 sets/ minTotal Power1.5kw System ParametersCushion Angle50 degreesCushion Revolution0.3 revolution/sPulses/circle1000Reduction Ratio9 Advantages:The equipment can reduce workersâ?? workloads, and help workers improve work efficiency.The equipment is easily operated, and can control the length of the rubber strip accurately. Services:Ã? Provide the technical design and solutions;Ã? Designing and manufacturing of non-standard equipment;Ã? Professional technical training and guidance on site according to the contract;Ã? Tele-technical consulting and services;Ã? Other special technical service according to clientâ??s requirements. Faults & Methods for Single-head automatic seal ring making machine:Fault 1: The unreeling machine keeps spinning for a long time.Cause: It induces unreeling signal unsuccessfully.Method: On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on.Fault 2: The feeding cylinder doesnâ??t go forward.Cause: Its start- point or all parts of it induce the signal unsuccessfully.Methods: Please check the small cylinderâ??s induction which can screw down & lift up in the pushing part;Please check the induction of pushing cylinder;Please check if the photo-electricity switches of all work-pieces are on;Please check if the gas path is unobstructed.
Corn Steep Liquor Powder for Organic FertilizerProduct:Corn Steep Liquor PowderModel : For organic fertilizerCAS NO.:66071-94-1â??Description: Corn steep liquor powder is made from high quality fresh corn steep. Before using it,Website:http://www.sdjuci.com,it will be through the removal of impurities, washing, and then remove the insoluble impurities. Steam low temperature spray drying was used to make the product without coking phenomenon, and keep the active principle not to be destroyed.â??Specification:1.Physical characteristics: Free flowing product(no stick);no clumps;fine yellow color.2.Chemical indexes:ItemsUnitSpecificationPhysical  characteristicsNAYellow color powderMoisture%â?¤8.5Protein%â?¥43Ash%15.5-20Lactic Acid%â?¥14.8PHNA3.5-5Total Amino%â?¥32  â??Application:Corn steep liquor powder can be used in the production of organic fertilizer.CSL powder contains many kinds of organic materials and about 3% each of N, P2O5 and K2O.So it is always used in production of organic fertilizer as the supplement and zymin.â??Advantage:1.Using twice filtration washing method, all insoluble impurities and other debris have cleaned up.The CSL powder can be soluble fast and complete dissolution. 2.We are the only one manufacturer,who has the qualification of export with CSL powder. 3.Using Three layers packaging. Outer bag is coated woven bag. There are two layers of plastic bags inside. No moisture absorption and no clumps occurs during storage. 4.Without any additives, all raw materials for non GMO.â??Packaging & Shipping:1.Using Three layers packaging. Outer bag is coated woven bag. There are two layers of plastic bags inside. No moisture absorption and no clumps occurs during storage.2.25 pp bag or kraft bag .3.500kg or 1000kg three layers pp bag.4.Shipment within7-10days after payment. â??FAQ:Q:What is your payment term?A: The preferred is T/T in advance. We can also accept L/C or other way according to the customer's requirement. Q:Can you supply samples for testing? A: Less than 500g sample is free,customer charged for freight cost. Q:What documents you provide? A: Usually, we provide Commerical Invoice, Packing List, Bill of loading, COA ,and Origin certificate.If your markets have any  special requirements, let us know. Q:What about the validity of the products? A: Two years. Q:What is the loading port? A:Usually is Qingdao. â??Contact Information:
HDPE Compact Plastic Ball Valve 1) Material: quality PE100 2) Sizes: 20mm -- 110mm 3) Pressure Rating:1.6MPa 4) Colors: black 5) Connection: hot melt fusion 6ï¼?with plastic ball inside Applications: 1. City and town dringking water supply system 2. Sea bed water supply system 3. Food and chemical industry 4. Replacement of cement pipes and steel pipes 5. Argillaceous silt, mine,mud transportation 6. Irrigation and garden green pipe networks and sewage treatment 7.Nature gas supply system With many yearsâ??export experiences, our HDPE Valves, HDPE Stop Valve, HDPE Compact Plastic Ball Valve, HDPE Steel Core Ball Valves, HDPE Double union Ball Valves have been welcomed in international markets. Features: 1. Chemical stability. Polyethylene does not erode to acid, alkali and salt. In addition micro-organism like bacteria or seaweed cannot grow in Polyethylene material. 2. Hygiene. Optimal conditions as pipes for providing portable water are met not only in that purity of contents can be maintained but also the taste of water does not change. 3. Fluidity. , PE water pipes smooth inner walls prevent blocking of pipes and minimize loss of water. 4. Flexibility. , PE water pipe is convenient to install because curved fittings don not have to be used at bent position and flexibility is maintained at low temperature. 5. Light weight. , PE pipes can be easily handled and installed because the weight of PE water pipes is just 1/7 of steel pipes 6. Perfect connection. Quick and perfect laying of pipes is possible because heat fusion connection is used for PE water pipes. 7. Non-corrosiveness. PE pipes do not corrode by chemicals, electricity, damp ground and salt. 8. Impact endurance. The pipes don not break by outer impact due to the characteristic of the material. 9. Cold endurance. The pipes do not break up to -70 degree 10. Long life. The pipes can be used for at least 50 years. 11.Green intiative,PE is a recycled material,environment friendly. 12.Low system cost,less maintenance costs,reduce the cost for the project Rongde is a professional manufacturer of HDPE Plumbing, PPR Plumbing, Pert Tubing, PEX Tubing, PVC Plumbing, Aluminium Plastic Composite Pipe, Shower Hose, Home Floor Heating Tubing, Bathroom Shower Hose, Industry Agriculture HDPE Plumbing etc. Our products have high quality and competitive prices.
Saddle HDPE Pipe Quick Repair Clamps Water Supply use Material : HDPE Standard : DIN Standard Connection : Butt fusion&socket fusion Working Pressure : SDR11,SDR12.5, SDR13.6,SDR17 Color : Black or customized Applications: 1. City and town dringking water supply system 2. Sea bed water supply system 3. Food and chemical industry 4. Replacement of cement pipes and steel pipes 5. Argillaceous silt, mine,mud transportation 6. Irrigation and garden green pipe networks and sewage treatment 7.Nature gas supply system Find trusted of HDPE Fitting, HDPE Manifold, PE Compression Fitting, HDPE Saddle Quick Repair Clamp etc. Any requirements and problems can ask us at any time. Waiting to create business relationship with you Features: 1. Chemical stability. Polyethylene does not erode to acid, alkali and salt. In addition micro-organism like bacteria or seaweed cannot grow in Polyethylene material. 2. Hygiene. Optimal conditions as pipes for providing portable water are met not only in that purity of contents can be maintained but also the taste of water does not change. 3. Fluidity. , PE water pipes smooth inner walls prevent blocking of pipes and minimize loss of water. 4. Flexibility. , PE water pipe is convenient to install because curved fittings don not have to be used at bent position and flexibility is maintained at low temperature. 5. Light weight. , PE pipes can be easily handled and installed because the weight of PE water pipes is just 1/7 of steel pipes. 6. Perfect connection. Quick and perfect laying of pipes is possible because heat fusion connection is used for PE water pipes. 7. Non-corrosiveness. PE pipes do not corrode by chemicals, electricity, damp ground and salt. 8. Impact endurance. The pipes don not break by outer impact due to the characteristic of the material. 9. Cold endurance. The pipes do not break up to -70 degree 10. Long life. The pipes can be used for at least 50 years. 11.Green intiative,PE is a recycled material,environment friendly. 12.Low system cost,less maintenance costs,reduce the cost for the project Rongde is a professional manufacturer of HDPE Plumbing, PPR Plumbing, Pert Tubing, PEX Tubing, PVC Plumbing, Aluminium Plastic Composite Pipe, Shower Hose, Home Floor Heating Tubing, Bathroom Shower Hose, Industry Agriculture HDPE Plumbing etc. Our products have high quality and competitive prices.
SIDA Factory KBQX-30SG high performance single hose pipe dry ice blasting machine, dry ice blaster, dry ice cleaning machine Cleaning Principle: Dry ice blast cleaning machine is the use of high-speed flow of compressed air mixed with dry ice pellets particles, through the spray gun nozzle into cleaning subject, make the surface fouling engine-grease produce cold crack, delaminating, was finally a cleaning method of impact stripping. The cleaning method belong to dry cleaning, dry ice will be instant vaporization, no residue, do not produce secondary waste, can be directly clean the production line without affect, the force is relatively weak compare to sandblast, it is non-destructive decontamination, does not hurt the equipment and damage of the mould. Technical Parameters: Model no.: KBQX-30SG dry ice blaster Raw material: 1.5~3 mm dry ice pellets Capacity of dry ice loading: 30 kg Dry ice flow: 0~1.5 kg/min (adjustable) Air pressure: 0.4~0.8 Mpa (adjustable) Air flow: 2.5~4 m3/min Blasting gun hosepipe: 5 m Size (L*W*H): 300*420*800 mm Total weight: 40kg Features of our dry ice blaster: 1. This machine used the technology cooperated with ITALY MEC company. 2. Small and the weight is less than half of the single pipe type, perfect for small space operation. 3. Pneumatic control, no electricity used, perfect for inflammable, explosive and field work. 4. Shell and hopper are stainless steel with good corrosion resistance.The hopper is equipped a vibrating feeding device to ensure reliable and smooth dry ice conveying. 4. The nozzle handle is safe to control, as soon as the spray is released, the spraying process stops immediately. 5. The amount of dry ice spray can be adjusted to save ice. Application of dry ice cleaning machine: 1.Especially suitable for the blast cleaning of tire mould, polyamine grease mould, automobile interior trim mold, plastic mold cleaning. 2. For petrochemical heating furnace tube coke blast cleaning. 3. Blast cleaning of mold coating for casting sand mold 4. For Food baking equipment, hotel kitchen, tar, and blast cleaning; 5. For transformer and transmission station equipment blast cleaning 6. Blast cleaning of acid and alkali pollution equipment. 7. Various equipment renovation and complex shape equipment appearance dirt blast cleaning. 8. It is particularly suitable for situations where water and sand can not be washed.
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. There are also the tile, the cat head tile, the dripping tile and so on. The surface, walls and roofs of antique buildings play an excellent decorative role. If you need a lot, the price can be negotiated again. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. There are also the tile, the cat head tile, the dripping tile and so on. The surface, walls and roofs of antique buildings play an excellent decorative role. If you need a lot, the price can be negotiated again. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. There are also the tile, the cat head tile, the dripping tile and so on. The surface, walls and roofs of antique buildings play an excellent decorative role. If you need a lot, the price can be negotiated again. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. There are also the tile, the cat head tile, the dripping tile and so on. The surface, walls and roofs of antique buildings play an excellent decorative role. If you need a lot, the price can be negotiated again. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. There are also the tile, the cat head tile, the dripping tile and so on. The surface, walls and roofs of antique buildings play an excellent decorative role. If you need a lot, the price can be negotiated again. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. There are also the tile, the cat head tile, the dripping tile and so on. The surface, walls and roofs of antique buildings play an excellent decorative role. If you need a lot, the price can be negotiated again. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
Tungsten carbide is one of the best materials with its highest hardness,wear resistance material in the industrial except diamond. HF WC is a nickel cored flexible rod coated with mainly spherical fused/cast tungsten carbide and Ni-Cr-B-Si-Matrix. The hard facing is highly resistance to acids,bases,lye,and other corrosive media and excessive wear conditions.It can be covered on the carbon steel,low carbon steel,low alloy steel,stainless steel,cast iron and ductile iron surfacing, suitable for oil drilling tools (such as PDC drill,Centralizers),building machinery (such as the blade of brick and concrete production),mining geological tools,agriculture,food and chemical industry machinery.It is mainly used for surfacing and repairing for the strong wear and tear corrosion part,can significantly reduce tool wear and tear,improve work efficiency.The rod has a low mlting range of between 950-1060 �?? and feature a self fluxing characteristic producing a smooth,clean welded surface. Application: Hard facing on ferritic and austenitic steels(steel castings),over-laying mixed blades,screws and conveyors in chemical,dye and food industry. Specially recommended for stabilizer blade in the petroleum industry. HF WC-S can hold the higher load wear, higher resistance to high stress and high stress wear.HF WC-S particles mainly is spherical casting WC particles and irregular casting WC particles,sepherical cast tungsten carbide particles have good toughness and strength binding with the metal,supplemented by a certain amount of irregular casting carbonization,so that the surfacing layer has a better wear resistance and impact resistance.The actual thickness of surfacing electrode, different diameters can be choosed accor- ding to the tools demand,generally covered 1 to 3 layers. Application: Hard facing on opetroleum industry tools(PDC,stabilizer blade),ferritic and austenitic steels(steel castings),over-laying mixed blades,screws and conveyors in chemical,shredding machine,mining scraper, mud pump blades, drill pipe joints, centralizer, mining cut Teeth, cone and so on. HF WC-C is suitable for low stress wear conditions,with a higher resistance to low stress wear.HF WC-C mainly filled with irregular casted WC particles. The hard particle size designed optimization,which blend different particle size very well. In the process of welding hard particles are closely,so improve the wear resistance and impact resistance of the surfacing layer. Application: Hard facing on opetroleum industry tools(PDC,stabilizer blade),shredding machine,Turning machine,drilling rock machine,mining scraper, surfacing and repaired mud pump blades, drill pipe joints, centralizer and so on.
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. If you need a lot, the price can be negotiated again. Our product Cangzhou Shiyi building materials Co., Ltd. is engaged in the production of old bricks.We have our own factories and warehouses. we have hundreds of years old brick sliced and sold at home and abroad. Old bricks are natural handmade products, which are free from pollution and relieve the pressure of modern environmental protection. It also helps to inherit excellent traditional culture and traditional crafts. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. If you need a lot, the price can be negotiated again. Our product Cangzhou Shiyi building materials Co., Ltd. is engaged in the production of old bricks.We have our own factories and warehouses. we have hundreds of years old brick sliced and sold at home and abroad. Old bricks are natural handmade products, which are free from pollution and relieve the pressure of modern environmental protection. It also helps to inherit excellent traditional culture and traditional crafts. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. If you need a lot, the price can be negotiated again. Our company Cangzhou Shiyi building materials Co., Ltd. is located in Cangzhou City, Hebei Province, and its factory is in Hui Autonomous County, Careful selection of qualified products that can be truly effective in old products. Our company has many years of sales history, factory direct supply, large inventory, and can also be supplied in a short time. People from all walks of life are welcome to visit. Because the product is also under the cable trading, the daily stock will be different, suggest buyers to purchase consultation before customer service, customer service staff will patiently answer your questions, thank you for your advice. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
Introduction Screw extruding sigma kneader----the best choice for high-viscosity materials,it consists of two "U" shape container made of either Mild Steel or Stainless Steel(SUS304, SUS321, SUS316L), with jacket of Carbon Steel covering two sides for heating or cooling. The mixing elements of the double sigma mixer are two pieces of Z type casted steel blades. They contrarily rotate inward and are fitted at close or specific clearance with the mixing chamber to finish thorough and uniform mixing. The two blades rotate at different speed(usually about3/2). We can make different kinds of double sigma mixer according to the customer's different demands, For example, vacuum system, heating or cooling methods, feeding hole, discharging methods, changeable liner, filtration net, safety valve, view glasses, Cover opening methods and so on. 1. Working Principles: Screw extruding sigma kneader is used to knead, mix, crush, disperse and re-polymerize high viscosity paste or elastoplastic materials, which can not be processed by the general powder mixers and liquid blenders. Screw extruding sigma kneader is the ideal equipment for all kinds of chemical products and has the merits of stirring evenly, kneading efficiently and no dead corner. The materials are scraped, stretched, folded and squeezed among the blade, slot wall, and ridge-like protrusions. The materials cycle from one end of the impeller to the other. The two mixing paddles are tangent and spin at different speeds to complet the kneading process. Tilt the slot to discharge the materials. 2. Uses: Screw extruding sigma kneader is widely applied to produce high viscosity sealant, silicone rubber, neutral and acidic glass cement, chewing gum, bubble gum, paper pulp, cellulose, and is also used in batteries, ink, pigments, dyes, pharmaceuticals, resins, plastics, rubber, cosmetics and other industries. 3. Category: There are four kinds of Double sigma mixer: Vacuum kneader, pressure kneader, atmospheric pressure kneader and high temperature kneader. It has three ways of discharging:Hydraulic tumbling discharge, ball valve type and screw extrusion type. 4. Characteristics: Control and record the temperature, time, viscosity and other relevant data through the PLC in real time during production. The parts of the cylinder and the blade that contact with the materials are made of stainless steel, to ensure product's quality. The kneader can be used for the high-viscosity paste or plastic solid with poor mobility around 5000PA. S, and the jacket can be heated or cooled by the heat transfer oil or water. According to the special needs, the plant can be designed to operate in vacuum. The difference between the speed of biax is 7.52r/min, so that the material is constantly changed, fastly mixed and has a larger transfer area for unit volume.
Our product We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. If you need a lot, the price can be negotiated again. Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Our company Cangzhou Shiyi building materials Co., Ltd. is located in Cangzhou City, Hebei Province, and its factory is in Hui Autonomous County, Careful selection of qualified products that can be truly effective in old products. Our company has many years of sales history, factory direct supply, large inventory, and can also be supplied in a short time. People from all walks of life are welcome to visit. Because the product is also under the cable trading, the daily stock will be different, suggest buyers to purchase consultation before customer service, customer service staff will patiently answer your questions, thank you for your advice. Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
PTFE Thread Seal Tape 1 2 x 2601 PTFE Thread Seal Tape 1 2 x 260 is processing technology advanced. 2 PTFE Thread Seal Tape 1 2 x 260 is the thread sealing tape which is widely used in applicable strong oxidant,Website:http://www.fjbluesea.com, strong acid, oxygen, gas, high temperature steam and various chemical corrosive of Pipes and valves interface. 3 PTFE Thread Seal Tape 1 2 x 260 can be long term used in the temperature between -190°C to +360°C.4 PTFE Thread Seal Tape 1 2 x 260 is used in hardware, construction, chemical and electronic, national defence, transport, medicine and other areas.1.25 years experience in manufacturing and selling, service will be more professional2.Large-scale production line will make more rapid delivery3.We have advanced equipment & skilled workman and will have better quality control4.We are factory with 200 workers,15000 m2 workshop and we can promise the Punctual delivery.5.One hour reaching Xiamen port helps save the exportation cost 6.Free samples and Small orders are welcomedQ: Are you trading company or manufacturer ?A: We are professional manufacturer ptfe thread seal tape,Anaerobic Ahesives & Sealant as well as faucet,angle valve,shower hose and other sanitary ware products.Q: How long is your delivery time?A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.Q: What is your terms of payment ?A: Payment�1000 USD, 100% in advance. Payment�1000 USD, 30% T/T in advance ,balance against the copy of BL. And we also accept LC at sight.1.OEM is accepted2.We will reply you within 24 hours.3.We can assure the quality.4.Sample is free.5.We can pick you from xiamen or jinjiang airport or Quanzhou station when you come to visit us.FUJIAN BLEA SEA INDUSTRIAL CO.,LTD is specialized in manufacturing faucet,angle valve,plumbing hose,floor drain,drainer,ptfe thread seal tape and other sanitary ware productions.
Where can use: Exterior wall and interior wall For what usage: Antique clay bricks are used for wall decoration Material: Natural clay materials Applying place: Apartment,Hospital,University,Railway Station,Mall,Hotel,etc Extrude way: Antique clay bricks are from molded Feature: Acid-resistant,Antibacterial,Heat Insulation,Non-slip,Firebrick,Wear-resistant Certificate: Our antique clay bricks have passed ISO9001:2008 quality system Colors: Red, white, grey Packaging Cartons box with strong wood pallets. Size(L*W*H): 240*55*20mm or cut according your needs Our company We have three colours bricks, red, grey and white. Our bricks are handmade and machine made, are sintered by natural clay material, so the fireproof effect of this kind of brick is very good. The size of bricks is 240*55*20mm, but we can cut the brick according to the customer's needs. Our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. This kind of bricks can be used to decorate the wall of cafes, houses, hotel and so on. If you need a lot, the price can be negotiated again. Cangzhou Shiyi building materials Co., Ltd. in Mengcun Hui Min Autonomous County, our products use machine slice technology to slice the whole brick, divided into brick skin and brick core, as well as triangular brick and corner brick. There are also the tile, the cat head tile, the dripping tile and so on. The surface, walls and roofs of antique buildings play an excellent decorative role. Advantages 1. Many years experience in old brick baking industry, knowing the markets 2. Direct professional building materials manufacturer, well controlling production, quality and delivery 3. Experienced sales, many years in export industry, so we have a lot of experience. 4. Well-trained processing workers and experienced craftmen, thanks to over 50 years of bricks export in our region. 5. Competively lower costs in labour, inland transportation and material. Welcome to contact with us for further information. Regular package 60pieces/carton 0.5kg/piece Packing is on pallet or carton as the pictures, we also can pack according to your reply Delivery time 5 to 10 days from the day of deposit
