Tungsten carbide is one of the best materials with its highest hardness,wear resistance material in the industrial except diamond.
HF WC is a nickel cored flexible rod coated with mainly spherical fused/cast tungsten carbide and Ni-Cr-B-Si-Matrix. The hard facing is highly resistance to acids,bases,lye,and other corrosive media and excessive wear conditions.It can be covered on the carbon steel,low carbon steel,low alloy steel,stainless steel,cast iron and ductile iron surfacing, suitable for oil drilling tools (such as PDC drill,Centralizers),building machinery (such as the blade of brick and concrete production),mining geological tools,agriculture,food and chemical industry machinery.It is mainly used for surfacing and repairing for the strong wear and tear corrosion part,can significantly reduce tool wear and tear,improve work efficiency.The rod has a low mlting range of between 950-1060 �?? and feature a self fluxing characteristic producing a smooth,clean welded surface.
Application:
Hard facing on ferritic and austenitic steels(steel castings),over-laying mix ed blades,screws and conveyors in chemical,dye and food industry.
Specially recommended for stabilizer blade in the petroleum industry.
HF WC-S can hold the higher load wear,
higher resistance to high stress and high stress wear.HF
WC-S particles mainly is spherical casting WC particles
and irregular casting WC particles,sepherical cast tungsten
carbide particles have good toughness and strength binding
with the metal,supplemented by a certain amount of irregular
casting carbonization,so that the surfacing layer has a better
wear resistance and impact resistance.The actual thickness of
surfacing electrode, different diameters can be choosed accor-
ding to the tools demand,generally covered 1 to 3 layers.
Application:
Hard facing on opetroleum industry tools(PDC,stabilizer blade),ferritic and austenitic steels(steel castings),over-laying mixed blades,screws and conveyors in chemical,shredding machine,mining scraper, mud pump blades, drill pipe joints, centralizer, mining cut Teeth, cone and so on.
HF WC-C is suitable for low stress wear conditions,with a
higher resistance to low stress wear.HF WC-C mainly
filled with irregular casted WC particles. The hard particle
size designed optimization,which blend different particle
size very well.
In the process of welding hard particles are closely,so improve
the wear resistance and impact resistance of the surfacing layer.
Application:
Hard facing on opetroleum industry tools(PDC,stabilizer blade),shredding machine,Turning machine,drilling rock machine,mining scraper, surfacing and repaired mud pump blades, drill pipe joints, centralizer and so on.
Supplier: Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46)
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. The material is separated by magnet and screener. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
We supply tungsten. Price negotiable. Specific terms are negotiable.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
