"Non-sparking", "spark-reducing", "fire-resistant" or "fireproof" tools are the names given to tools made from metals such as brass, bronze, Monel metal (copper-nickel alloy), copper-aluminum alloy (aluminum bronze), or a copper-beryllium alloy (beryllium bronze). The tensile strength of the preferred "non-sparking" metal is lower than that of the steel normally used to make tools. The lower tensile strength means that the metal has less strength or tear resistance when stretched under test conditions. It also means that these tools are softer, wear faster, and must be trued more frequently than ordinary steel tools. What is the most important thing to know about "non-sparking" tools? Non-sparking tools also produce sparks, sometimes called "cold sparks". The heat from these cold sparks is so low that they do not ignite carbon disulfide, which has the lowest ignition point of any substance known to man. Therefore, while "non-sparking" tools may reduce the risk of sparking, they do not eliminate the possibility of sparking. The name "non-sparking" is misleading because these tools can produce sparks: the term "spark-reducing tools" better describes these tools.
1. Main ingredient: polyamide 2. Appearance: yellow and transparent 3. Softening point (): 135 4. (175) Viscosity (mPa.s): 8000 5. Opening hours (s): 5 6. Anti-temperature (): 130 7. Characteristics and application range: high-grade hot melt adhesive, high temperature resistance, narrow melting point, good weather resistance, strong impact resistance, and strong viscosity. Suitable for automotive filters, bonding and sealing of automotive interior decoration, bonding of special circuits, thermal transfer printing, etc. 8. Notes: (1). The opening and curing time will vary with the glue temperature, coating quantity, lamination time and strength. (2). Keep the hot melt adhesive clean to avoid other impurities blocking the glue outlet during use and affecting the Use of coating equipment. (3). The temperature of hot melt adhesive is high when melting, please wear goggles and gloves to prevent burns. (4). The operating temperature should not exceed 180â??; or lower than the normal operating temperature, otherwise it will decrease bond strength. (5), should be stored in a cool and dry place.
Automatic olive pitting machine 1. The full-automatic olive enucleation equipment has a high degree of automation. The mold conveyor belt is automatically fed and fed to transport and punch the core. The separation effect of core and meat can be completed only by pouring the fruit into the feed hopper. It can work continuously and solve the difficulties of low efficiency, labor and time-consuming of manual enucleation. 2. The structure of the olive enucleator is composed of stainless steel thick walled square tube and channel steel welding, which enhances the stability of the equipment during startup and operation. All parts are fastened and assembled with bolts, making the equipment more convenient and fast in operation and maintenance. 3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane, which is anti-wear, tensile and tear resistant and has been used for a long time. 4. The olive core remover is simple and convenient to operate without long-term care. One person can manage multiple machines at the same time. The transmission system adopts the design concept and standardized components. The core punching principle adopts the process of machine tool to punch the core, so that each equipment meets the design standard, so that the effect of core removal rate is good and the shape of fruit remains unchanged.
Our fused cast AZS #41 block has the most corundum-baddeleyite eutectic crystals among the electro-fused Al2O3-ZrO2-SiO2 series products. Its corrosion resistance is the best and therefore its normally recommended to be used in quick wear positions to prolong the furnace life. It is the most widely used material both in glass contact and superstructure of glass melting furnaces. Mainly applicable for sidewalls, doghouses, throat, bottom budding, dam blocks, electric block corners, and also linings of furnace in industries. Our product has passed ISO international certification, it is made from high pure material, fired at high temperature by advanced technology, with the advantages of high strength, high compression resistance, good thermal shock resistance, good performance in high temperature, good thermal conductivity, good erosion resistance and so on. This product is available in a large size straight and special shapes which are available for special machining processes. We basically have three casting methods: PT, ZWS and WS, different required castings are manufactured accordingly.
(1) The full-automatic cherry pitting machine adopts a device with high degree of automation and automatic feeding and feeding of mold conveyor belt to carry out transportation and core punching. It can complete the function of cutting most of the cranberries by pouring them into the feed hopper. It solves the difficulties of low efficiency, labor-consuming and time-consuming manual nuclear removal. (2) The structure of the full-automatic cherry enucleator is composed of 304 stainless steel thick wall square tube and channel steel welding, which makes the equipment more stable during startup and operation. All parts are fastened and assembled with bolts, making the equipment more convenient and fast in operation and maintenance. (3) The raw materials of the full-automatic cherry enucleator are made of 304 stainless steel, which fully meets the hygienic standards of food processing equipment. The conveyor belt is made of imported polyurethane, which is anti-wear, tensile and tear resistant, and has a longer service life. (4) The automatic cherry enucleator is simple and convenient to operate without long-term care. One person can manage multiple machines at the same time.
Pilot/ Sonde Housing (2 3/8"~6 5/8" FH) Connection: Direct connection with drill pipe, Octagonal connection, Side-opening Octagonal connection back-load transmitter housing Standard connection side -load transmitter housing Choose the suitable drill bit based on different soil condition to improve construction efficiency. Good wearing, connviences to demount and maintain. Available for all makes (XCMG, Ditch Witch, Vermeer, Astec, others) and bolt hole patterns. 3.5", 4", 4.5" and 5" cut. Sonde Housings with a variety of thread configurations. Our Side-Load Housings are manufactured from American-Made 4140 Alloy. Our Heat Treatment Process and optional Hard Facing give you the wearability you can count on. They are offered for Duck Bill or Carbide Bits. All of our sonde housings are machined from heat treated 4140 Alloy for superior strength and durability.Side load feature provides for quick installation and removal of transmitter sonde and batteries.Hex-style connection on the 2-3/4" and 3" models provides for quick disconnect from the drillstem.
Pilot/ Sonde Housing (2 3/8"~6 5/8" FH) Connection: Direct connection with drill pipe, Octagonal connection, Side-opening Octagonal connection back-load transmitter housing Standard connection side -load transmitter housing Choose the suitable drill bit based on different soil condition to improve construction efficiency. Good wearing, connviences to demount and maintain. Available for all makes (XCMG, Ditch Witch, Vermeer, Astec, others) and bolt hole patterns. 3.5", 4", 4.5" and 5" cut. Sonde Housings with a variety of thread configurations. Our Side-Load Housings are manufactured from American-Made 4140 Alloy. Our Heat Treatment Process and optional Hard Facing give you the wearability you can count on. They are offered for Duck Bill or Carbide Bits. All of our sonde housings are machined from heat treated 4140 Alloy for superior strength and durability.Side load feature provides for quick installation and removal of transmitter sonde and batteries.Hex-style connection on the 2-3/4" and 3" models provides for quick disconnect from the drillstem.
1. The full-automatic olive enucleation equipment has a high degree of automation. The mold conveyor belt is automatically fed and fed to transport and punch the core. The separation effect of core and meat can be completed only by pouring the fruit into the feed hopper. It can work continuously and solve the difficulties of low efficiency, labor and time-consuming of manual enucleation. 2. The structure of the olive enucleator is composed of stainless steel thick walled square tube and channel steel welding, which enhances the stability of the equipment during startup and operation. All parts are fastened and assembled with bolts, making the equipment more convenient and fast in operation and maintenance. 3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane, which is anti-wear, tensile and tear resistant and has been used for a long time. 4. The olive core remover is simple and convenient to operate without long-term care. One person can manage multiple machines at the same time. The transmission system adopts the design concept and standardized components. The core punching principle adopts the process of machine tool to punch the core, so that each equipment meets the design standard, so that the effect of core removal rate is good and the shape of fruit remains unchanged.
The characteristics of the roller sorting process of the virgin fruit sorter, such as small classification error, are loved by the majority of fruit farmers. The virgin fruit can be sorted quickly without damaging the fruit in the sorting process. Wanqing sorter is made of stainless steel, so that the sorter can be used for a long time. The extended feed chute can be customized and widened according to requirements. All specifications including sorter can be customized. Equipment features: On the basis of retaining high-power low-speed motor and roller operation, the improved roller sorter focuses on the coordination of the whole machine and the scientific matching of motor wheel sets. The roller of the sorter is made of stainless steel, which has strong toughness and wear resistance, overcomes the disadvantages of easy cracking, easy breaking and easy aging of the conveyor belt, and prolongs the service time; It is not easy to damage the peel in the process of fruit screening, and the screening effect is very uniform. Cangzhou Wanqing machinery can produce vacuum fryer, fruit and vegetable enucleator, fruit and vegetable cleaner, enucleator and other functional equipment. Welcome to inquire.
The strawberry half cutting machine of wanqinglong brand frozen processing plant is a fully automatic half cutting machine. As long as the fruit to be processed is poured into the hopper of the machine, the fruit of different specifications will automatically fall into the loading hole of the corresponding specifications of the machine, and the machine will automatically lift the cutting valve, which can cut 2 and 4 halves according to the user's use requirements, The raw materials of the full-automatic half separator are made of stainless steel, which fully meets the hygienic standards of food processing equipment. The conveyor belt is made of imported polyurethane, which is anti-wear, tensile and tear resistant, and has a longer service life. The machine is simple and convenient to operate without long-term care. One person can manage multiple machines at the same time. The design concept and standardized components adopted by the transmission system are adopted. The punching principle adopts the process of machine tool to punch the core, so that each equipment meets the design standard, has high precision and half cutting effect.
1. Wanqinglong Cranberry half cutting machine has the degree of automation. The mold conveyor belt is equipped with automatic feeding and feeding devices to transport and cut the cranberries. The separation effect of core and meat can be completed only by pouring the cranberries into the feed hopper. It can work continuously and solve the difficulties of low efficiency, labor-consuming and time-consuming manual cutting. 2. The structure of cranberry half cutting machine is composed of stainless steel thick wall square pipe and channel steel welding, so as to enhance the stability of the equipment during startup and operation. All parts are fastened and assembled with bolts, making the equipment more convenient and fast in operation and maintenance. 3. The raw material of the equipment is made of stainless steel, which meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane, which is anti-wear, tensile and tear resistant, and has a longer service life. 4. The cranberry cutting machine is simple and convenient to operate without long-term care. One person can manage multiple machines at the same time, 5.Core punching principle: the process of machine tool is used to punch the core, so that each equipment meets the design standard, so that the effect of core removal rate is good, and the shape of fruit remains unchanged.
On the basis of retaining the advantages of high-power low-speed motor and track operation, the improved track jujube picker focuses on the coordination of the whole machine and the scientific collocation of motor wheel sets. The conveyor belt of the track jujube picker is made of imported silicone rubber material, which has strong toughness and wear resistance, overcomes the disadvantages of easy cracking, easy breaking and easy aging of the conveyor belt, and prolongs the service life by 5 times compared with the ordinary silicone tape; The special aluminum alloy V-shaped track groove is firm and not easy to deform; The V-shaped grooves are separated by a meshing shaft sleeve, which can easily adjust the spacing of the conveyor belt, and achieve the effect of one machine with multiple uses (virgin fruit, garlic rice, Xinjiang jujube, grey jujube, golden silk jujube, hawthorn, seabuckthorn, kumquat, sugar orange, litchi, longan and other small fruits and vegetables). The length of the body is increased to three meters, and the fruits and vegetables can be divided into 4-7 grades according to the diameter of the fruits and vegetables, The fruit selection is more uniform and the grade is finer. It is not easy to damage the peel in the process of fruit screening for jujube and winter jujube, and the screening effect is very uniform.
Provides a waterproof, sterile barrier to external contaminants including liquids, bacteria and viruses* Gentle to the skin, yet holds catheters and other devices in place Hypoallergenic and not made with natural rubber latex Dressing is conformable and flexes with skin for greater patient comfort Unique shapes and designs for both I.V. and wound needs Tegaderm Transparent Film Dressings can be used to cover and protect catheter sites and wounds, to maintain a moist environment for wound healing, and to secure devices to the skin. Tegaderm Transparent Film Dressings are made with a thin, semi-permeable film that enables long wear time and full site visibility to minimize unnecessary dressing changes. Catalog code 1624W is 2-3/8 inch x 2-3/4 inch (6 cm x 7 cm), 100 EA/box, 4 boxes/case. Suggested Applications To cover and protect I.V. catheter sites Acute and chronic wounds Skin protection Feeding tubes Superficial partial thickness burns Stage I or II pressure ulcers Autolytic debridement facilitated by the moist wound healing environment Protective eyelid coverings Post tattoo application and removal
Spiny gourd also called kantola is a seasonal monsoon vegetable. It is a rich source of antioxidants and flavonoids. It has antilipid peroxidative properties, that prevent oxidation of fats, thus preventing fatty liver disease. Blood Pressure: Consumption of the fresh fruit juice of the spiny gourd helps regulate blood pressure. The anti-lipid peroxidative properties present in it helps in healing the artery walls and its wear and tear. Prevents common infections: It has the ability to prevent common viral infections that cause cold and other lung infections. It also consists of anti-allergic, anti-bacterial, and anti-inflammatory properties. Free radicals: Free radicals in the body hinder the growth and survival of the cells in our body. Therefore, the antioxidants and flavonoids present in the spiny gourd can scavenge these free radicals. Thus, enhancing the life span. Also, it protects the liver and prevents the accumulation of fat in it. Kidneys: It reduces the chances of stone formation in the kidneys and can effectively remove the stones in the kidney and bladder. Brain: This vegetable has several neuroprotective properties and supports brain function. Apart from this, It is also good for patients suffering from diabetes.
Tobee Hydroman THY24 - THY85 Heavy Duty Hydraulic Slurry Pumps are designed for the pump that are driven by hydraulic motors, which are available by eliminating haul trucks, conveyor belts and other mechanical earth moving equipment. Hydraulic submersible slurry pumps are capable of dredging sand from the river and/or sea in high density and specific gravity by using the optional water jets and cutter heads. Dredging is an activity that dredge sand and gravel underwater in shallow seas or rivers, and so the project of dredging system will consist of dredging slurry pump, pipe, diesel motor or electric engine, and various accessories, in order to excavate and remove material from the bottom of water. Design Features: Wear parts are all constructed with abrasion resistant chromium alloy. Unique mechanical seal device can prevent the electric motor from high pressure water and impurity. Easy installation, operation and cost saving, No need additional vacuum pump. In addition to the main impeller, a pair of agitation impeller is equipped to help break and mix the sludge. Professional technology support is provided during the whole process of the usage and maintenance. handle up to 70% per weight material density.
Tobee Hydroman TJQ Submersible Slurry Pumps are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps in the Industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors. TJQ Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman offers the highest head submersible, largest capacity, heavy duty slurry pumps available on the market. Design Features: HIGH-EFFICIENCY HIGH CHROME REVERSIBLE AGITATOR Doubles the life of the agitator. The excavating action is created by the hardened high chrome agitator blades. They create a current that lifts settled sediments conveying them to the suction of the impeller which delivers a continuous flow of solids to the pump discharge. LOW OPERATING RPM Low operating RPM promotes low wear rates and extended component life. When compared to other pumps of similar capacity Hydroman has a lower operating speed.
Tobee WN Dredge Pumps are single-stage single suction cantilever horizontal centrifugal pumps with advantages of light weight, good wear-resistance, super dredging performance, WN dredging pumps impeller passage is very wide, It can continuously transport gravels or high plastic clay and not happens jam, Especially for dredging sands and damming of the river and seas. WN Series Dredge Pumps can be also integrated with the gearbox, That mean the pump and gear box share one common shaft. So It doesn't need the pump bearing assembly and frame, In this way, Not only save space, but also reduce cost and breakdown ratio, Let the dredge pump give play to maximum effectiveness. Design Features: Construction WN200 to WN500 dredge pumps are of single casing, single stage cantilevered horizontal centrifugal pumps. Two types of coupling with gear box: frame and pump box. WN600 to WN1000 dredge pumps are of double casings, single stage cantilevered centrifugal pumps. These pumps are equipped with frame and lubrication is force thin oil. The design of double casing the pump working till the volute liner almost worn down and guarantee no leakage when volute liner is worn down.
Tobee 10x8S-GH High Head Gravel Pump is designed for continuously handling the most difficult high abrasive, big particles slurries with extra high head. The wet parts are made of high-Chrome alloys to ensure long service life. GH gravel pumps has far better performance than common gravel pumps in dredging, sand mining, barge loading and mineral processing etc. Design Features: GH high head gravel pump is cantilevered horizontal centrifugal pump designed for handling the most difficult higher abrasive slurries which contain too big solids to be pumps by a common slurry pump. Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage. The wet-parts are made of Ni-hard and high chromium abrasion-resistance alloys. The discharge direction of pump can be oriented in any direction of 360°. closed impeller with wide passage, good performance of NPSH and abrasion resistance. All the wet parts are made of wear resistant high chrome alloy material. They are suitable for delivering slurry in mining, metal melting, dredging, barge loading.
Tobee 250TV-SP Vertical Slurry Pump is no submerged bearings or seals heavy duty cantilevered pumps, which ideal for a variety of submerged suction pumping applications. These pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms. Design Features: Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones. The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing. Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered. Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
Tobee SPR Rubber Lined Vertical Slurry Pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 meters. Pumping is maintained even when the top inlet is not submerged, thus enabling the level of liquid to be lowered right down to the bottom inlet or the bottom of any suction extension pipe. The wet parts of SPR vertical sump pump is interchangeable with the SP series hard metal lined heavy duty sump pumps. Design Features: Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones. The assembly is grease lubricated and sealed by labyrinths; the upper is grease purged and the lower protected by a special flinger. The upper or drive end bearing is a parallel roller type whilst the lower bearing is a double taper roller with preset end float. This high performance bearing arrangement and robust shaft eliminates the need for a lower submerged bearing. Column Assembly - Completely fabricated from mild steel. The SPR model is elastomer covered. Casing - Has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the SP and from moulded elastomer for the SPR.
