We are manufacturing s.s kichen sink, quartz sink, frp manhole cover..
Clinker, used rails, cement, coffee.Trade services
Apparels, Home Textiles, Bathroom Accessories..
Gypsum rocks, gypsum powder, gypsum board, gypsum ceiling tiles, rock salt (industrial salt and deicing salt), limestone, marble chips, iron ore, chrome ore, feldspar and bauxite.
Architectural Hardware Fittings, Doors and Window Hardware's..
Instrument and hydraulic high pressure valves , tube and pipe fittings.
Silica quartz.
Kaolin Clay , Silica Sand, Silica Quartz And Limestone .
Himalayan salt products, gypsum crushed, limestone, bauxite, cement.Exporter & importer
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part: servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
Metal tube tube CNC plasma cutting machine is mainly used for cutting all metals, including but not limited to aluminium sheet, iron sheet, galvanized (steel) sheet, mild steel, titanium sheet. stainless steel, iron etc. Applies in cars, motorcycles, pressure vessels, chemical machinery, nuclear industry, general machinery, engineering machinery,steel structure, shipbuilding and other industries. Features of Metal tube tube CNC plasma cutting machine 1. This plasma cutting machine is used for metal square & round tube tube cutting. Good man-machine control panel makes operation more convenient and simple, can cut kinds of complex shapes' metal sheet. 2. The liner rails are imported with high precision, good guide. Rack gear is manufactured by professional factory. Its surface is carbonizing and quenching. 3. LCD operate panel can prompt kinds of operating ways, so operator can operate it easily after simple training. 4. Driving system is LEADSHINE or YASKAWA servo drive (Dual Driver makes it fast), you can choose China LEADSHINE , Japan Panasonic /YASKAWA servo motor or stepper motor to make sure whole machine can run with smoothly in a wider speed range, short acceleration time 5. Torch height controller can adjust the best cutting distance automatically, to confirm working piece high precision cutting. 6. Automatic plasma machine Chuck rotary makes work efficiency Parameters of Metal tube tube CNC plasma cutting machine No. Description RB6020T (Length is 6000mm,Diameter is 100-400mm) 1 Working Size 200(Diameter)*6000mm(Length) 2 Z Axis Clearance 150mm (200 And Higher Is Optional) 3 Table Type Chuck rotary (Automatic + Dual Driver) 4 Transmission System Rack Pinion And Hiwin Linear Rails For X/Y 5 Driving System Leadshine Servo motor ( YASKAWA / PANASONIC is optional, also according to your needs and budget.) 6 Max. Cutting Speed 12000mm/Min(different configuration and different material and thickness speed is different) 7 Max. Travelling Speed 30000mm/Min(different configuration speed is different) 8 Working Voltage 380V/3ph(220V/3ph is optional) 9 Plasma Generator Huayuan China and USA power as your requirements 10 Arc Mode FANGLING 11 Output Current 63/100/120A/160A/200A� China (45/65/85/105/125/200A USA) 12 Max. Cutting � Thickness 6/15/18/20/30mm (This is approximate, It also according to power and kinds metal) 13 Operating System JiaoDa fangling FX430A controller (Professional for tube cutting) 14 Working Material Steel, Aluminum, Galvanized Sheet, Titanium Plate,  Platinum Plate  and almost all of the metal� square tube/Circle tube
2.Technical parameters: 1. Box size in the laboratory: DL-120LA W1200 * D1000 * H500 (mm), Approximate dimensions: 2300 * 1300 * 1400mm, 2 standard temperatures, Laboratory temperature: nss acss 35 ± 1 /pass 50 ± 1 Pressure bucket humidity: nss acss 47 ± 1 /pass 63 ± 1 , Salt water temperature: 35 ± 1 It can be heated without water, 3 volumes, Laboratory capacity: 800L Salt water tank capacity: 40L, 4 compressed air, Compressed air pressure: 1.00 ± 0.01kgf/c 5 spray volume: 1.0-2.0ml/80c /h, 6 spray mode: continuous spray, timed spray, programmable spray, intermittent spray, demisting in the box, 7. Power supply: AC220V 50Hz/20A, 8. Material: The entire PVC board is made, and the salt spray testing machine adopts advanced three-dimensional reinforcement technology internally, with a strong and solid structure that never deforms. 9. Water adding method: An automatic water adding system is adopted, which has the function of automatically replenishing the water level when the water level is insufficient, and the test is not interrupted. 10. Nozzle: Precision glass nozzle, salt spray testing machine used for 4000 hours to ensure no crystal blockage. 11. Protection system: Equipped with dual over temperature protection and insufficient water level warning to ensure safe use. 12. Temperature controller: digital display, PID control, high stability platinum temperature probe, error 0.3 13. Heating method: The laboratory adopts direct steam heating method, which increases the temperature quickly and shortens the standby time of the salt spray testing machine. 14. The spray tower is equipped with two conical dispersers, which have the functions of guiding fog, adjusting fog volume, and even fog falling. 15. The pressure bucket adopts Henry's law to heat and humidify, and provide the humidity required by the salt spray testing machine laboratory. 16. Opening method: Pneumatic automatic opening is adopted, The salt spray testing machine is one of the "three prevention" (humid heat, salt spray, mold) testing equipment for artificial climate environments. It is an important salt spray testing equipment for studying the adaptability and reliability of various environments in industries such as machinery, national defense, light industry, electronics, light industry electronics, and instruments. This salt spray testing machine can perform neutral salt spray tests in accordance with GB/T2423.17 "Basic Environmental Testing Regulations for Electronic and Electrical Products - Test Ka: Salt Spray Test Method", and can also perform acetate spray tests. This salt spray tester complies with CNS, ASTM, JIS and ISO standards. The salt spray test is to test the corrosion resistance of the products after coating, electroplating, Anodizing, anti-rust oil and other anti-corrosion treatments on the surfaces of various materials.
44.MODEL:DL- BTST Textile Sweater Button Push Adhesion Pull Tensile Strength Button Push & Pull Tensile Strength button tensile strength dynamometer Standard configuration: 1. Tension seat 2. Pushing and pulling force gauge 3. Two jaw pliers 4. Three jaw pliers 5. Tension pliers 6. Bottom fabric fixture 7. Male button fixture 8. Mother button clamp Size: 280 * 220 * 777mm Button tensile testing machine Button strength machine: The purpose of this test is to define the responsibility of garment manufacturers to ensure that buttons, buttons, and fasteners are properly secured to the garment, preventing buttons from detaching from the garment and posing a risk of swallowing by infants. Therefore, all buttons, buttons, and fasteners on ready-made clothing must be tested by a button strength tester. This function performs uniform and vertical tensile testing on various buttons on clothing to check whether their firmness meets relevant safety standards Standard: 16CFR1500.51-53, ASTM PS79-96 Operating instructions: 1. Install the fixture, cooperate with the test button, and lock the test sample onto the base tightly 2. Put down the fixture, grip the buttons tightly and pull them upwards. Each group of buttons should be able to withstand a minimum of 17 pounds of tension (7.72kg) and maintain it for 10 seconds without any signs of looseness or damage. At least 20 buttons per model need to be tested simultaneously to be considered qualified If one of the buttons is loose or damaged, or if it is replaced, it is necessary to retest all of them
Melt Index Meter
Model: DL-9929XM Product Name: Touch Screen Linear Wear Resistance Testing Machine Test stroke: 0-100mm Test speed: 0-60 times/min adjustable Test object: coating, coating, or other surface treatment Sports mode: electric Fixture self weight: 15g Test load: 250g Counting setting range: 1~999999 times Maximum allowable size of workpiece: 220 * 160 * 50mm Machine size: W480 �? D360 �? H360mm Machine weight; 20kg Power supply: 1 â?® AC220V 2A or specified 2. Introductionï¼? This instrument is suitable for testing the wear resistance of products such as plastics, automotive parts, rubber, leather and textiles, electroplating, freely detachable components, paints, printing patterns, etc. It can be used to evaluate the wear resistance of products, as well as the scratch resistance (single or multiple scratches) and color transmission of products. Both dry and wet wear tests can be conducted.
3.Technical Parameter: Model and specification :DL9930 Drop height: 10-1500mm, any setting Steel ball weights :55g, 64g, 110g, 225g, 535g (optional upon request) The maximum size of the test piece is :400 * 350mm Height display method: Graduated scale display (electrically selectable with LCD or touch screen control display) Drop height error :â?¤ �± 2mm Drop method: electromagnetic adsorption drop Control and lifting methods: Electric control electromagnet, manual lifting of electromagnet fixing rod (electric lifting using motor) Protective cage :around the protective device Sample fixation method: fixture clamping and fixation Drop bottom plate size :500 * 400 * 10mm Overall dimensions of the testing machine :500 * 400 * 1800mm Control box overall size :300 �? 370�? 1060mm Motor power: 0.4KW (electric) The net weight of the equipment is :approximately 40kg Power supply:AC220V/50Hz 5.Configuration List 1. Main purpose: The falling ball impact testing machine is suitable for testing the impact strength of plastic, ceramics, acrylic, glass, lenses, hardware and other products. 2.Product features: DC electromagnetic control mode is adopted to place the steel ball under the electromagnetic chuck and the steel ball is automatically sucked up. Press the drop key, the magnet releases the steel ball instantly, and the steel ball will conduct Free fall test to accurately impact the surface of the test piece; The drop height can be adjusted up and down, and there is a height scale attached (the electric series can directly display the test height) to determine the drop height of the component. Equipped with a laser positioning device, the impact testing position can be accurately aligned with the laser, resulting in more accurate testing results. Compliant with standards Test standards: JIS R3205:1989, ISO/DIS125421 12543-6:1997 AS/NZS2208:1996, GB/T9962-1999.
11 Main usage and application Rope Tension Testing Instrument can be applied to various occasions such as power industry telecommunications industry transportation industry glass curtain wall decoration cable way industry construction industry pleasure grounds tunnel construction fishing major research institutions and teaching institutions testing institutions and other occasions involved with the tension of ropes and steel wire ropes 12 Product characteristics It has the rope structure with tension force and can directly measure without disassembly It has the light weight simple structure convenient operation and applies to any situations It has the stable performance high measurement accuracy with automatic system compensation functionWhen the specification of the tested rope the same as the rope tension testing instrument rope number the measurement accuracy can reach 3 error or less within the rated measurement range It has broader range of measurement with 19 kinds of rope diameter measuring functions Applied rangeapplied to flexible stretched ropessuch as various steel wire ropes highstrength ropes etc Accuracy grade 36 of maximum function depending on the rope form and features Rope Diameter 640mm
1. Equipment usage: This testing ± 1/500000, Relative error of indication: better than ± 1% of the indication, 2 displacement (moving crossbeam, excluding stretching fixture), Measurement range: 0-700mm, Resolution: 0.0025mm, 3 Test speed: Speed adjustment range: 0.01-500mm/min (stepless speed regulation), Accuracy: better than ± 0.5% of the indicated value, Displacement rate control accuracy: within ± 1.0% of the set value when the rate is less than 0.1mm/min; When the speed is 0.1mm/min, within ± 0.2% of the set value, 4 Control: Force control speed regulation range: 0.005-5% F.S/S, Force control rate control accuracy: within �± 2% of the set value when the rate is less than 0.05% FS/S; When the rate is 0.05% FS/S, within the set value of ± 0.5%/ ± 1.0%, Deformation speed regulation range: 0.005% FS/S, Deformation rate control accuracy: within ± 2% of the set value when the rate is less than 0.05% FS/S; When the rate is 0.05% FS/S, it is within ± 0.5% of the set value, Constant force, constant deformation, and constant displacement control range: 0.5% -100% FS/S, Constant force, constant deformation, and constant displacement control accuracy: within ± 0.1% of the set value when the set value is â 10% FS; When the set value is less than 10% FS, within ± 1% of the set value. 5 Effective test space (with fixture): Effective stretching space: 700mm, Effective compressed space: 700mm, 6. Working environment: Room temperature 10~35 , humidity 20%~80%, 7. Power supply for the entire machine: single-phase, 220V ± 10%, 50Hz, 8 Host size: 530 370 1400mm, 9 Weight: 140 kg,
