HDB130 specification: Input size (mm): 35 Final product size (mesh): 80-400 Main motor kw): 90 Production (t/h): 1.5-10 Total weight (ton): 30 Power(kw): 225 Dimension(L X W X H) m: 10 X8.5 X 12 First produced in the country80-400 meshes Power consumption reduced by over 30 percent. The rival for the hard material The HDB German grinder breaks through the limit that the ordinary grinder can only mill the materials of Mohs hardness 7 or less, and can grind the materials with Mohs hardness 6-9, and the foundation is simple, the vibration is small, and the power consumption is low Technical structure features 1.The main unit and the Driving system constitute one located above the cover cylinder, with its compact structure, novelty, which is for the domestic initiative, the machine body directly installed in the ground, and the installation and aligning are very convenient, with simple foundation, good rigidity, and stable operation. This machine is high production, low power consumption. Low vibration, easy operation and stable performance 2.The reducer adopts a new type of reduction device: the primary engine speed can be adjusted according to the basic conditions. Which is suitable for different hardness of materials 3.The material volume of shoveling is larger: The shovel blade is optimization design, which can transfer the material to the rollers and ring In the greatest degree 4.The accuracy is high, and the frequency turbine classifying is adopted, the classifying impeller. The sealing surface of the impeller is formed into a palace shape seal with the dispose end face of the handle opening, and the shorts are not easy to be formed, and the separating powder does not run rough thus the passing rate is high. 5.Low power consumption, compared with HD Series grinding mill, power consumption reduced by 30% 6.The applied range: The range applies to Mohs hardness 6-9, humidity is below 6%, process nonflammable, non-explosive super hard materials, such as quartz, potassium feldspar, Albite zircon sand, titanium ore, chrome ore, Calcined bauxite, calcined kaolin, silicon carbide and so on.
Model NO.: 88290003-111 Filter Number: 1 Efficiency: 0.1-5micron Type: Cartridge Filter Media: Glass Fiber and Synthetic Fiber Cap: Iron Using: Screw Air Compressor Parts Market: Asia,South Ameriica,Middle East HS Code: 8421399090, 8421399090 Transport Package: Carton Box and Pallets Origin: China Clapboard: without Clapboard Medium Material: Fiberglass Filtration Grade: HEPA Filter Model: 88290003-111 Support: Carton Steel Net Brand: Replacement of Sullair Filter Fuction: Air Filter Working Life: 2000hour Trademark: Qingdao Futai Specification: 0.7kg 产��述� Product Description Replacement Sullair Air Filter 88290003-111 1. We adopt the micro glass fiber with steady performance as the filter media which is produced by the LYDALL (USA) and HV (Germany). 2. The filters are designed with reasonable multilevel filter media ,which means small initial pressure difference and long working time. It reduces the operation costs greatly. 3. The filters are equipped by double static channel device with safe and efficient assembly process, which make sure the filters to work well in the bad environment with high pressure, high temperature and high corrosion. 4.Good quality &competitive price 5.Large dust holding capacity 6. Passed ISO 9001:2000 and BV
HDB130 specification: Input size (mm): 35 Final product size (mesh): 80-400 Main motorï¼kw): 90 Production (t/h): 1.5-10 Total weight (ton): 30 Power(kw): 225 Dimension(L X W X H) m: 10 X8.5 X 12 Technical structure features 1.The main unit and the Driving system constitute one located above the cover cylinder, with its compact structure, novelty, which is for the domestic initiative, the machine body directly installed in the ground, and the installation and aligning are very convenient, with simple foundation, good rigidity, and stable operation. This machine is high production, low power consumption. Low vibration, easy operation and stable performance 2.The reducer adopts a new type of reduction device: the primary engine speed can be adjusted according to the basic conditions. Which is suitable for different hardness of materials 3.The material volume of shoveling is larger: The shovel blade is optimization design, which can transfer the material to the rollers and ring In the greatest degree 4.The accuracy is high, and the frequency turbine classifying is adopted, the classifying impeller. The sealing surface of the impeller is formed into a palace shape seal with the dispose end face of the handle opening, and the shorts are not easy to be formed, and the separating powder does not run rough thus the passing rate is high. 5.Low power consumption, compared with HD Series grinding mill, power consumption reduced by 30% 6.The applied range: The range applies to Mohs hardness 6-9, humidity is below 6%, process nonflammable, non-explosive super hard materials, such as quartz, potassium feldspar, Albite zircon sand, titanium ore, chrome ore, Calcined bauxite, calcined kaolin, silicon carbide and so on
The HDB German grinder breaks through the limit that the ordinary grinder can only mill the materials of Mohs hardness 7 or less, and can grind the materials with Mohs hardness 6-9, and the foundation is simple, the vibration is small, and the power consumption is low HDB130 specification: Input size (mm): 35 Final product size (mesh): 80-400 Main motorkw): 90 Production (t/h): 1.5-10 Total weight (ton): 30 Power(kw): 225 Dimension(L X W X H) m: 10 X8.5 X 12 Technical structure features: 1.The main unit and the Driving system constitute one located above the cover cylinder, with its compact structure, novelty, which is for the domestic initiative, the machine body directly installed in the ground, and the installation and aligning are very convenient, with simple foundation, good rigidity, and stable operation. This machine is high production, low power consumption. Low vibration, easy operation and stable performance 2.The reducer adopts a new type of reduction device: the primary engine speed can be adjusted according to the basic conditions. Which is suitable for different hardness of materials 3.The material volume of shoveling is larger: The shovel blade is optimization design, which can transfer the material to the rollers and ring In the greatest degree 4.The accuracy is high, and the frequency turbine classifying is adopted, the classifying impeller. The sealing surface of the impeller is formed into a palace shape seal with the dispose end face of the handle opening, and the shorts are not easy to be formed, and the separating powder does not run rough thus the passing rate is high. 5.Low power consumption, compared with HD Series grinding mill, power consumption reduced by 30% 6.The applied range: The range applies to Mohs hardness 6-9, humidity is below 6%, process nonflammable, non-explosive super hard materials, such as quartz, potassium feldspar, Albite zircon sand, titanium ore, chrome ore, Calcined bauxite, calcined kaolin, silicon carbide and so on
FU chain conveyor is used for level design absorbs the domestic and foreign experience in the factory (or inclined ⤠15 ) new product conveying powdery, granular materials, the product has the advantages of novel structure, reasonable design, reliable operation, high efficiency and energy saving, long service life, the material in the sealed box body transport, dust little spillover. Conveying chain to track roller, wear less, the conveying device has been widely used in building materials, chemical, thermal power, food processing, mining and other industries, it has the characteristics of large conveying capacity, low energy consumption. The bulk of each particle exists between inner friction force and inner pressure, when the conveying chain conveyor and accessories for sport, bulk material subject to tension and conveying chain exercise the same direction in the machine, conveyor, the scattered pressure material particles within the increase, so that the friction force between the bulk material is increased. When the friction force is greater than the internal friction material and machine groove sidewall, bulk material along the conveying chain motion direction to move forward, and the internal pressure to ensure a steady state material layer, thus forming a continuous flow of the whole, like water in general. Company description: Henan Zhengzhou Mining Machinery Co., Ltd. Was founded in 1956, is designated units and the Ministry of Machinery Industry Henan Mechanical and Electronic Industry Department designated cement and washing equipment, after half a century of development, from the initial single production plants become an area of 60, 000 square meters, plant construction area of 35, 000 square meters, fixed assets of 100 million of existing research, design, development, manufacture, sale, installation, commissioning and training services for an integrated modern enterprise.
This product is suitable for bonding and combination of pearl cotton, softening point of 80 degrees or so, and yellowing resistance, will not affect the product quality and color specifications, such as the maximum extent to ensure the stability of the bonding material, not out of shape. For white colloid form. Epe pearl cotton glue composition analysis, curing material, viscosity, non-volatile detection. Epe pearl cotton glue ingredient analysis, curing content, viscosity, nonvolatile matter detection epe glue is a kind of polymer as the main body of one-component adhesive products, the new solution designed to remove epe materials difficult problem of epe special glue. 1.It has the advantages of room temperature curing, convenient operation, high initial adhesion, transparent, yellow and yellow change, fast positioning and non-toxic. 2. Single component, excellent water resistance, heat resistance, cold resistance, aging resistance, acid and alkali resistance, corrosion resistance, oil resistance and albinism. 3. Through the eu rohs standard, the storage of 1 year will not deteriorate, is the current domestic adhesion nylon plastic adhesive field of the first product. Epe materials dedicated plastic glue adhesive is widely used in epe foam packaging material, suitable for epe foam epe foaming, pp, pvc, sponge, foam, wood, polystyrene material such as glue, as well as the pearl cotton, soft material such as eva adhesive effect is obvious.
Grade: 304/304l/316/316l Od:0.3mm~300mm Wt:0.08mm~1.5mm Length max: 22000mm Package:bundled with knitted plastic bag, wooden cases or according to customers' request. Payment terms:fob, cif As welded tubing As welded tubing is our least expensive product line, and is manufactured by running coils of annealed strip through a cold roll forming process. It is continuously welded using appropriate shielding gases for each alloy to prevent oxidation of the seam. With as welded tubing, the seam is clearly visible on both the exterior and interior of the tube, but the size of the weld bead is held within strict tolerances. Typical applications for as welded tubing include tubular heating elements for both industrial and consumer targeted end products, beverage or fluid transportation systems, mechanical devices, automotive applications, and heat exchange devices. Bead rolled tubing Bead hammered tubing is initially formed with a process identical to that of as welded tubing, except that an additional, special cold roll forming process with an interior mandrel support is added to smooth both the interior and exterior weld seam. As a result, the seam is nearly invisible on both the exterior and the interior, creating a tube that is an excellent, lower cost substitute for seamless tubing. Applications for bead hammered tubing include anything where interior and exterior smoothness are important, such as certain liquid and gas handling applications, and fabricated applications where exterior fittings require a smooth surface.
At Kendall, we pride ourselves on delivering top-tier cold storage solutions designed to meet the diverse needs of our clients. Our extensive range of equipment ensures optimal performance, reliability, and efficiency in various applications. Among our standout offerings are the Water-cooled Screw Condensing Units, engineered to provide exceptional cooling capabilities for a wide range of temperature requirements. These units are perfect for businesses seeking robust and reliable cooling solutions tailored to their specific needs. Specifications Semi-Hermetic Low-Temperature Storage Screw Condensing Unit (-20~-15): Designed for low-temperature storage applications, this unit ensures stable and efficient cooling in demanding conditions. It is ideal for cold storage facilities that require precise temperature control, such as food processing plants, pharmaceutical storage, and chemical processing industries. Semi-Hermetic Water Cooled Screw Compressor Unit (-5~5): The unit is perfect for medium-temperature applications, providing consistent cooling performance. Suitable for a variety of uses, including refrigerated warehouses, beverage storage, and dairy processing, it ensures products are kept at optimal conditions to maintain their quality and safety. Semi-Hermetic Water Cooled Screw Compressor Rack (-5~5): Featuring multiple compressors in a single rack, this system offers enhanced reliability and flexibility. It's ideal for large-scale operations where redundancy and scalability are critical, such as in logistics centers and large food distribution hubs. Semi-Hermetic Water Cooled Screw Compressor Unit Top Quality (-20~-15): The premium unit is engineered for superior performance and durability in extremely low-temperature environments. It is perfect for applications requiring rigorous temperature control, such as deep freeze storage facilities and specialized industrial processes. Why Choose Kendall's Water-cooled Screw Condensing Units? Engineering: Our units are designed with cutting-edge technology to ensure optimal performance and energy efficiency. The semi-hermetic design reduces the risk of refrigerant leakage, enhancing operational reliability. Quality Assurance: Each unit undergoes rigorous testing to ensure it meets our stringent quality criteria. Comprehensive Support: From initial consultation to installation and ongoing maintenance, Kendall offers comprehensive support to ensure your cold storage solutions perform flawlessly. Our team of experts is always on hand to provide guidance and technical assistance.
Auto parts low volume production The biggest advantage of low-volume manufacturing is that the practice of small batch manufacturing can be more efficient, increasing the flexibility of the design process, minimizing the occurrence of risk, and shortening the time to market. Low Volume Tooling Low volume tooling refers to the process of creating tooling or molds for the production of a relatively small number of parts or components. This is in contrast to high volume tooling, which is used for the mass production of large quantities of parts. Low volume tooling is often used in situations where the cost of high volume tooling is prohibitive, or where the production volume is not high enough to justify the cost of high volume tooling. Low volume tooling can also be used to quickly produce small quantities of parts for prototyping or testing purposes. There are a number of different low volume tooling techniques that can be used, depending on the specific requirements of the project. Some common techniques include: 3D Printing: 3D printing can be used to create molds or tooling for small production runs. This is particularly useful for creating complex shapes or designs that would be difficult or expensive to produce using traditional machining techniques. Soft Tooling: Soft tooling refers to the use of molds or tooling made from materials such as silicone or urethane. Soft tooling is typically less expensive than hard tooling and can be produced more quickly, making it a good option for low volume production runs. Rapid Tooling: Rapid tooling involves the use of rapid prototyping techniques to quickly create tooling or molds for low volume production runs. This is a good option for situations where time is a critical factor and quick production is required. CNC Machining: CNC machining can be used to create low volume tooling for the production of small quantities of parts. This is a good option for situations where the parts require a high degree of accuracy and precision. What Is Low-Volume Manufacturing Low-volume manufacturing refers to the production of a relatively small number of products or parts, typically between 50 and 10,000 units, using traditional manufacturing processes such as injection molding, CNC machining, or casting. It is an ideal solution for companies that need to produce small quantities of products, prototypes, or components for testing, marketing, or initial production runs. Compared to high-volume manufacturing, which is used to produce millions of products at a low cost per unit, low-volume manufacturing is more flexible and can quickly adapt to changes in design or product specifications. It is also more cost-effective than high-volume production for small runs, as it avoids the high tooling and setup costs associated with large-scale production.
Aluminum Hydroxide Technical Date Sheet: Molecular Formula: Al(OH)3 H.S. CODE: 2818 3000 CAS No.:21645-51-2 EINECS No.:244-492-7 Fine Powder Aluminum Hydroxide Introduction Aluminum Hydroxide is a white powder which can be used as flame retardant and filler. While it is used for resin Solid Surface,It has characteristic of white crystalline powder, non-toxic, tasteless, good mobility, low oil absorption, low iron content, particle morphology, particle size distribution, low impurity content, good stability, high whiteness, uniform particle size and good dispersibility. While it is used for composite materials,it has characteristic of micro powder,high white powder without secondary pollution,smoke elimination, filling, antistatic.The initial decomposition temperature of aluminum hydroxide is about 205 â??. Aluminum hydroxide flame retardant can release a large amount of water vapor when heated. A large amount of water vapor can store heat and dilute the concentration of polymer combustible gas. It can also form a non combustible barrier between the combustion source and the matrix material to achieve the purpose of flame retardant. At the same time, it is also a smoke suppressant, because the gas it releases is water vapor, which has no corrosion to metals. Usage Aluminum Hydroxide 14-100um filler powder can be used for MMA and UP solid surface and artificial marble that used for buildings and home decoration. Aluminum Hydroxide 1-10um flame retardant powder can be used for rubber hose, rubber plate, carpet, rubber liner, PVC wire and cable material, wire and cable sheath, electrical LDPE cable material,LSZH wire compound,Silicone rubber,Silastic module,Foam insulation,Paper-making,PVC industry,Pouring sealant,Shell of car/phone/plane/computer,toothpaste friction agent, low-voltage insulation devices,glass fiber reinforced plastic,adhesives, grille, carpet and other industries which required flame retardant. Package H-WF-8/10 25kg/bag, 24 Tons without pallets/20 FCL,20 Tons with pallets/20 FCL.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Please tell us your needs and we will give you the best service. Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off product imageproduct imageproduct imageproduct imageproduct imageproduct imageOur Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off product imageproduct image Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant product imageproduct imageproduct imageproduct image FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished offOur Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off product imageproduct image Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market -- Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50 to +120 -- Oil, heat,ozone and abrasion resistant product imageproduct image FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off product imageproduct image Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market -- Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant product imageproduct image FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off product imageproduct image Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market -- Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50â?? to +120â?? -- Oil, heat,ozone and abrasion resistant product imageproduct image FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.
We are the world's top supplier of V-belts. Our main products are V-ribbed belts, automotive timing belts, industrial timing belts, V-belts, toothed belts, etc. Splicing Machine Generally, only one layer of original rubber is used in the production of products, but our products are spliced together with 4 layers of original rubber, and the products produced have a longer life and are more wear-resistant Grinding Machine After the product is initially formed, in order to ensure uniform thickness of the V-belt, uneven parts of the V-belt will be polished off Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market -- Complete models, fast delivery PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50 to +120 -- Oil, heat,ozone and abrasion resistant FAQ Q1:Can i order a small quantity of samples? ---- Yes. We can offer you samples at the bulk prices and send them by DHL, TNT. EMS, FEDEX or others according to your requirements. Q2: How could i know whether the belt fits for my machine? ---- You can tell me which product you are interested in, and i will give you its main sizes. You can also send me drawings or samples, and then we will put them into production at your requests. Q3: I want to find a supplier for my new products. Can you help me? ---- Yes. Kindly offer me your drawings or samples for analysis. Q4: How long does it take to make a new product? ---- Usually 10-15 days for drawings and 7 days for samples. Q5: Can we stencil (or print ) our logo or company name on the belt or package? ---- Yes. Please inform us your logo or design before mass production. Q6: What is your payment term? ---- T/T 30% deposit and T/T 70% balance before shipment. Q7: What is your quotation? ---- We will give you FOB price. But EXW, CIF and CNF can also be given according to your demands.